Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Paulo Fernando Riberiro Ortega has a total of 172 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation of the Colorimetric Transition in Polydiacetylene Nanovesicles Induced by α-Cyclodextrin and the Inhibitory Role of Triblock Copolymer Addition

    by Maria C. O. Rodrigues, Maria E. F. R. Antunes, Alex R. M. Alves, Diego C. de Morais, Frederico B. De Sousa, Garbas A. S. Junior, João P. C. Trigueiro, Paulo F. R. Ortega

    Polydiacetylene (PDA) nanovesicles are widely recognized as versatile chromatic sensing platforms, exhibiting a visible blue-to-red colorimetric transition in response to external stimuli such as temperature, pH, and molecular recognition events. In contrast to the conventional goal of amplifying this chromatic response, this work presents a supramolecular approach to inhibit the α-cyclodextrin (α-CD)-induced colorimetric transition in PDA systems. α-CD is known to interact with PDA vesicles through host–guest inclusion at the vesicle interface, triggering the characteristic chromatic change. Here, we show that the incorporation of an EO–PO–EO triblock copolymer (L64) into PDA suspensions enables controlled modulation of the α-CD-induced chromatic response, leading to a progressive attenuation of the blue-to-red transition as the L64 concentration increases. Isothermal titration calorimetry reveals a stronger affinity of α-CD for L64 (K = 11,300) than for PDA vesicles (K = 4000), with both interactions being spontaneous (ΔG° ≈ −21 kJ mol−1) and predominantly entropy-driven. Copolymer aggregation and phase separation occur without compromising the PDA vesicles, indicating that the observed chromatic modulation arises from supramolecular competition. This study introduces a strategy to regulate PDA affinity chromism using biocompatible triblock copolymers, offering a tunable and robust pathway for the design of responsive and safe chromatic sensing platforms.

  • Open Access

    Reduced Graphene Oxide/Few-Walled Carbon Nanotube Composite Films for Shuttle Suppression in Lithium–Sulfur Batteries: The Role of Surface Functional Groups

    by Danielle D. Justino, Fernanda G. Gandra, Luan T. Cardoso, Rayane C. F. Silva, João Paulo C. Trigueiro, Ana P. C. Teixeira, Marta Sevilla, Rodrigo L. Lavall, Paulo F. R. Ortega

    Lithium–sulfur (Li–S) batteries offer high theoretical energy density but are critically limited by the dissolution and migration of soluble polysulfide intermediates, leading to capacity fading and poor cycling stability. In this work, free-standing reduced graphene oxide/few-walled carbon nanotube (rGO@FWCNT) composite membranes are investigated as functional films for Li–S cells, with emphasis on the role of interfacial chemistry. FWCNTs provide mechanical robustness and efficient electronic percolation, while rGO introduces tunable surface functionality and morphology. The composite films exhibit a highly wrinkled, lamellar architecture composed of partially stacked rGO sheets interconnected by a three-dimensional nanotube network, favoring electrolyte infiltration and ionic transport. Despite a decrease in intrinsic rGO conductivity with increasing functionalization, highly functionalized rGO@FWCNT membranes significantly enhance apparent Li+ diffusion through surface-assisted diffusion mechanisms mediated by oxygen-containing functional groups. In parallel, these membranes effectively confine soluble polysulfides near the cathode region, suppressing their migration while acting as electrochemically active extensions of the sulfur cathode. As a result, internal resistance, ohmic polarization, and charge-transfer resistance associated with sulfur redox reactions are substantially reduced. Among the investigated systems, the highly functionalized rGO300@FWCNT membrane (24.3 wt % O) delivers the best electrochemical performance, achieving a discharge capacity of 1143 mAh g–1 at C/10 along with enhanced rate capability and cycling stability. These results highlight the importance of rational interfacial design in functional membranes for advanced Li–S batteries.

  • Open Access

    Insights into the Electrochemical Performance of NaFePO 4 and LiFePO 4 Cathodes in Sulfate-Based Aqueous Electrolytes: A Combined Theoretical–Experimental Approach

    by Sarah G. G. de Oliveira, Renan A. P. Ribeiro, Gabriel H.M.O. Pinto, João Paulo C. Trigueiro, Luciano A. Montoro, Garbas A. S. Junior, Paulo F. R. Ortega


  • Carbon-coated Na3V2(PO4)3 and ordered mesoporous carbon as high-rate electrodes for sodium-ion hybrid supercapacitors in water-in-salt electrolytes

    by Gabriel J.P. Tonon, Fernando A.S.C. Neto, Nathany L.O. Sousa, Aline C. Marciano, Rayane C.F. Silva, Paula S. Pinto, Ana P.C. Teixeira, Garbas A. dos Santos Junior, Paulo F.R. Ortega

  • Open Access

    Co-BDC MOF/Graphene Nanohybrid as an Efficient Electrode Material for High-Performance Supercapacitors

    by Ana L. Braga, Tomaz A. S. Lima, Victor D. S. Fortunato, Danielle D. Justino, Pedro G. R. Gomes, Rayane C. F. Silva, Larissa F. M. A. Vieira, Hélio Ribeiro, Ana Paula C. Teixeira, Paulo F. R. Ortega, et al.

    A Co-BDC metal–organic framework/reduced graphene oxide (rGO) hybrid was synthesized via in-situ MOF growth followed by controlled pyrolysis to obtain a Co-BDC–derived nanoporous carbon (NPC)/rGO electrode for supercapacitors. The rGO-assisted transformation preserves the precursor integrity and yields a uniform, conductive, and porous carbon architecture with well-dispersed Co0 species. The optimized NPC/rGO-10 electrode delivers a specific capacitance of 172 F g–1 at 1 A g–1 with 96% retention after 6,000 cycles. An asymmetric device (NPC/rGO-10//rGO) shows stable operation over 30,000 cycles and maintains 94.4%, emphasizing the outstanding reversibility and structural robustness of the electrode material. Additionally, rGO incorporation reduced the level of Co leaching into the electrolyte, indicating enhanced chemical stability under electrochemical operation. The novelty of this work lies in the rGO-assisted MOF-to-carbon conversion strategy, which enables a robust nanoporous carbon/graphene hybrid with suppressed metal leaching and exceptional long-term stability.


  • Open Access

    Synthesis and Application of P(EDOT-co-Py)@MWCNT Hybrid as Cathode Electrode for Aqueous Aluminum-Ion Batteries

    by Glenda Ribeiro de Barros Silveira Lacerda, Luiz P. Fagundes dos Santos, Nathany Lopes Oliveira Sousa, Gabriel Jácomo de Paula Tonon, Maria Luiza M. Rocco, Tulio Matencio, Hállen Daniel Rezende Calado, Paulo F. Ribeiro Ortega, Garbas Anacleto dos Santos Junior

    A hybrid material based on the copolymerization of EDOT (3,4-ethylenedioxythiophene) and Py (pyrrole), 1:1 monomer ratio, onto multi-walled carbon nanotubes (MWCNTs) was synthesized through a multistep functionalization approach. The resulting P(EDOT-co-Py)@MWCNT hybrid, poly(3,4-ethylenedioxythiophene-co-pyrrol)@MWCNT hybrid, was characterized by Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). These characterizations confirmed the successive functionalization steps, the effective anchoring of the monomers, and the subsequent formation of the copolymer. Transmission electron microscopy (TEM) images revealed a homogeneous polymer coating along the nanotube surface while preserving the structural integrity of the MWCNTs throughout the functionalization and polymerization processes. The P(EDOT-co-Py)@MWCNT hybrid was evaluated as an active electrode material for aluminum-ion storage in an aqueous aluminum sulfate electrolyte. The system exhibited two distinct charge-storage mechanisms: at high current densities, proton surface adsorption dominated, whereas at lower rates, a faradaic contribution associated with polymer chain redox activity and the reversible extraction/insertion of Al3+ became prevalent. The hybrid electrode delivered high specific capacities, reaching 200.6, 106.3, and 44.3 mAh g−1 at 0.10, 0.25, and 0.50 A g−1, respectively. These values are comparable to—or even exceed—those reported for similar cathodic materials designed for Al3+ storage, highlighting P(EDOT-co-Py)@MWCNT hybrid as a highly promising cathode candidate for aqueous aluminum-ion energy-storage systems.

  • Open Access

    Synthesis and Application of P(EDOT-co-Py)@MWCNT Hybrid as Cathode Electrode for Aqueous Aluminum-Ion Batteries

    by Glenda Ribeiro de Barros Silveira Lacerda, Luiz Paulo Fagundes dos Santos, Nathany Lopes de Oliveira Sousa, Gabriel Jácomo de Paula Tonon, Maria Luiza Miranda Rocco, Tulio Matencio, Hállen Daniel Rezende Calado, Paulo Fernando Riberiro Ortega, Garbas Anacleto dos Santos Junior

    A hybrid material based on the copolymerization of EDOT (3,4-ethylenedioxythiophene) and Py (pyrrole), 1:1 monomer ratio, onto multi-walled carbon nanotubes (MWCNTs) was synthesized through a multistep functionalization approach. The resulting P(EDOT-co-Py)@MWCNT hybrid, poly(3,4-ethylenedioxythiophene-co-pyrrol)@MWCNT hybrid, was characterized by Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). These characterizations confirmed the successive functionalization steps, the effective anchoring of the monomers, and the subsequent formation of the copolymer. Transmission electron microscopy (TEM) images revealed a homogeneous polymer coating along the nanotube surface, while preserving the structural integrity of the MWCNTs throughout the functionalization and polymerization processes. The P(EDOT-co-Py)@MWCNT hybrid was evaluated as an active electrode material for aluminum-ion storage in aqueous aluminum sulfate electrolyte. The system exhibited two distinct charge-storage mechanisms: at high current densities, proton surface adsorption dominated, whereas at lower rates, a faradaic contribution associated with polymer chain redox activity and the reversible extraction/insertion of Al³⁺ became prevalent. The hybrid electrode delivered high specific capacities, reaching 200.6, 106.3, and 44.3 mAh g⁻¹ at 0.10, 0.25, and 0.50 A g⁻¹, respectively. These values are comparable to—or even exceed—those reported for similar cathodic materials designed for Al³⁺ storage, highlighting P(EDOT-co-Py)@MWCNT hybrid as a highly promising cathode candidate for aqueous aluminum-ion energy-storage systems.

  • Open Access

    Investigation of the Colorimetric Transition in Polydiacetylene Nanovesicles Induced by α-Cyclodextrin and the Inhibitory Role of Triblock Copolymer Addition

    by Maria Clara O. Rodrigues, Maria Eduarda F. R. Antunes, Alex R. M. Alves, Diego C. de Morais, Frederico B. De Sousa, Garbas A. S. Junior, João Paulo C. Trigueiro, Paulo F. R. Ortega

    Polydiacetylene (PDA) nanovesicles are widely recognized as versatile chromatic sensing platforms, exhibiting a visible blue-to-red colorimetric transition in response to stimuli such as temperature, pH, and molecular recognition events. Alpha-cyclodextrin (α-CD) is known to interact with PDA vesicles, inducing this transition through host–guest inclusion at the vesicle interface. Here, we demonstrate that incorporating the EO–PO–EO triblock copolymer L64 into PDA suspensions enables precise modulation of this α-CD-induced chromatic response. Increasing L64 concentration progressively suppresses the blue-to-red transition, as the copolymer competes with PDA headgroups for α-CD inclusion. Isothermal titration calorimetry revealed that α-CD exhibits a stronger affinity for L64 (K = 11,300) than for PDA vesicles (K = 4,000), with both processes being spontaneous (ΔG° ≈ –21 kJ mol⁻¹) and entropy-driven. Importantly, the self-assembled PDA vesicular structure remains intact, as confirmed by phase separation and optical analyses, highlighting that the colorimetric inhibition arises from supramolecular competition rather than structural disruption. This work introduces a new supramolecular strategy to negatively regulate PDA affinity-chromism through competitive inclusion complexation with biocompatible triblock copolymers, offering a robust and tunable route for developing responsive and safe chromatic sensors.

  • Understanding the role of functional groups in reduced graphene oxide electrodes modified with aromatic redox-active compounds for supercapacitor applications

    by Iury D. Ferreira, Nathany L.O. Sousa, Garbas A. dos Santos Junior, Danielle D. Justino, Alex R.M. Alves, Frederico B. de Sousa, Patricia B. Velasco, Paula S. Pinto, Ricardo Santamaría, Paulo F.R. Ortega


  • Effect of CO2 activation on ordered mesoporous carbons obtained from tannin biomass for cathode support on stable lithium-sulfur batteries

    by Rayane Cristian Ferreira Silva, Rubens Lucas de Freitas Filho, Keiliane Silva dos Santos, Igor Bolonezi Gomes, Aline Capelão Marciano, Mariana Godoi Anunciação, Danielle Diniz Justino, Fernanda Gabrielle Gandra, Luan Teixeira Cardoso, Ricardo Santamaria Ramirez, et al.