Guo Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Guo Guo has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Yanyu Wei
University of Electronic Science and Technology of China
14 shared publications Xinjian Niu
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China
10 shared publications- Lingna Yue
UESTC
5 shared publications Yinghui Liu
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China
5 shared publications- Hairong Yin
UESTC
4 shared publications Hongchao Wang
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu, China
4 shared publications
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73  (9) , 5777-5782
Fabrication and Experimental Test of Low-Loss Waveguide Mode Converters for 0.34-THz Vacuum Electron Devices
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73  (9) , 5777-5782
Fabrication and Experimental Test of Low-Loss Waveguide Mode Converters for 0.34-THz Vacuum Electron Devices
- 13 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73  (6) , 3830-3836
Fabrication and Experimental Investigation of High-Frequency Cavity and Low-Loss Window for 0.34 THz Extended Interaction Klystron
The fabrication and experimental test of the high-frequency structure and the low-loss diamond window for 0.34 THz extended interaction klystron (EIK) are introduced in this article. The high-frequency cavity design and the tolerance analysis of the EIK high-frequency structure are performed first according to the current fabrication capability. Following the high-speed micro-milling processing technology, the surface roughness of the high-frequency structure is effectively controlled within $0.1~\mu $ m, and the fabrication errors are within $4~\mu $ m, respectively. The cold test results for the high-frequency structure show resonant frequency of 340.6 GHz for both the input and output cavities with a tiny relative frequency deviation comparing to updated simulation results by considering the actual surface roughness and fabrication errors. After chemical vapor deposition (CVD) growing for the monocrystalline diamond (MD) sheet, the low-loss window is developed by the metallization of magnetron sputtering and vacuum brazing. Test results show the good transmission performances for S ${}_{{21}} \gt -1.8$ dB and S ${}_{{11}} \lt -13$ dB simultaneously, with the excellent vacuum leak rate and a wide operation band. This work indicates significant potential for component fabrications in terahertz vacuum electron devices.
- 13 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73  (6) , 3830-3836
Fabrication and Experimental Investigation of High-Frequency Cavity and Low-Loss Window for 0.34 THz Extended Interaction Klystron
The fabrication and experimental test of the high-frequency structure and the low-loss diamond window for 0.34 THz extended interaction klystron (EIK) are introduced in this article. The high-frequency cavity design and the tolerance analysis of the EIK high-frequency structure are performed first according to the current fabrication capability. Following the high-speed micro-milling processing technology, the surface roughness of the high-frequency structure is effectively controlled within $0.1~\mu $ m, and the fabrication errors are within $4~\mu $ m, respectively. The cold test results for the high-frequency structure show resonant frequency of 340.6 GHz for both the input and output cavities with a tiny relative frequency deviation comparing to updated simulation results by considering the actual surface roughness and fabrication errors. After chemical vapor deposition (CVD) growing for the monocrystalline diamond (MD) sheet, the low-loss window is developed by the metallization of magnetron sputtering and vacuum brazing. Test results show the good transmission performances for S ${}_{{21}} \gt -1.8$ dB and S ${}_{{11}} \lt -13$ dB simultaneously, with the excellent vacuum leak rate and a wide operation band. This work indicates significant potential for component fabrications in terahertz vacuum electron devices.
- 11 February 2026
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 47  (2) , 9
Thermal Analysis with Recurrent Neural Network for 0.34 THz Extended Interaction Klystron
- 11 February 2026
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 47  (2) , 9
Thermal Analysis with Recurrent Neural Network for 0.34 THz Extended Interaction Klystron
- 2 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. PP  (2771957X) , 1-4
A Wideband and High-Density Integration Microwave Transceiver Component for Tile-Style Phased Array With SiP Technology
A novel K-band transceiver component is introduced in this letter, featured with high-density integration, wide band, and miniaturization. The advanced system-in-package (SiP) technology and double-sided slotted (DS) packaging technology are employed to integrate the core chip and GaAs transceiver chip circuits with four channels together, and therefore to achieve the lightening and thinning of the component. After structure design and thermal design, an $8\times 12$ tile style module in K-band has been manufactured and tested. Test results show that the active transmission gains are more than 5 dB, with the input and output reflection loss more than 10 dB from 20.5 to 25 GHz within the relative bandwidth of 21.7%. For the total 96 channels, phase consistency is less than 8.5°, and the amplitude consistency is better than 0.59 dB, demonstrating excellent channel consistency. Additionally, the total dimensions of the fabricated module are only $104\times 78$ mm, and the total weight is only 290 g. The architecture design and processing technologies indicate significant potential for miniaturizing and high-density integrated tile-style phased array antennas.
- 2 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. PP  (2771957X) , 1-4
A Wideband and High-Density Integration Microwave Transceiver Component for Tile-Style Phased Array With SiP Technology
A novel K-band transceiver component is introduced in this letter, featured with high-density integration, wide band, and miniaturization. The advanced system-in-package (SiP) technology and double-sided slotted (DS) packaging technology are employed to integrate the core chip and GaAs transceiver chip circuits with four channels together, and therefore to achieve the lightening and thinning of the component. After structure design and thermal design, an $8\times 12$ tile style module in K-band has been manufactured and tested. Test results show that the active transmission gains are more than 5 dB, with the input and output reflection loss more than 10 dB from 20.5 to 25 GHz within the relative bandwidth of 21.7%. For the total 96 channels, phase consistency is less than 8.5°, and the amplitude consistency is better than 0.59 dB, demonstrating excellent channel consistency. Additionally, the total dimensions of the fabricated module are only $104\times 78$ mm, and the total weight is only 290 g. The architecture design and processing technologies indicate significant potential for miniaturizing and high-density integrated tile-style phased array antennas.
- 22 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72  (10) , 5670-5676
Demonstration of Low-Loss and Miniaturized Terahertz Radial Waveguide Power Divider/Combiner
A G-band 16-way power divider/combiner (PDC) based on a radial waveguide structure is designed, fabricated, and experimentally validated in this article. The PDC consists of a rectangular TE10 to circular TE01 mode converter and a radial divider, and micro-machining and micro-electroforming processes are employed to ensure high structural accuracy and fabrication consistency. The cold test, including single-port and back-to-back measurements, is conducted, focusing on S-parameters and amplitudephase uniformity. The results indicate that within 210230 GHz, the ${S} _{11}$ is better than −13 dB and ${S} _{21}$ is better than −1 dB. For the total of 16 channels, the root mean square (rms) amplitude is less than 1 dB, and the rms phase is less than 5.2°, demonstrating excellent amplitude and phase consistency. To evaluate its performance, a hot test by using a traveling-wave tube (TWT) is performed, and the tested insert losses of 1.1 dB are obtained at the frequency of 220 GHz. In addition, the fabricated PDC exhibits a regular hexadecagonal external contour, defined by a dimension of $\Phi 81.6\times \delta 24.5$ mm. Characterized by compact, low-loss, and miniaturized longitudinal length as well as excellent power-handling capability, the PDC is well-suited for power dividing and combining by solid-state or vacuum electronic devices, thereby supporting the development of high-efficiency and high-power terahertz (THz) sources.
- 22 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72  (10) , 5670-5676
Demonstration of Low-Loss and Miniaturized Terahertz Radial Waveguide Power Divider/Combiner
A G-band 16-way power divider/combiner (PDC) based on a radial waveguide structure is designed, fabricated, and experimentally validated in this article. The PDC consists of a rectangular TE10 to circular TE01 mode converter and a radial divider, and micro-machining and micro-electroforming processes are employed to ensure high structural accuracy and fabrication consistency. The cold test, including single-port and back-to-back measurements, is conducted, focusing on S-parameters and amplitudephase uniformity. The results indicate that within 210230 GHz, the ${S} _{11}$ is better than −13 dB and ${S} _{21}$ is better than −1 dB. For the total of 16 channels, the root mean square (rms) amplitude is less than 1 dB, and the rms phase is less than 5.2°, demonstrating excellent amplitude and phase consistency. To evaluate its performance, a hot test by using a traveling-wave tube (TWT) is performed, and the tested insert losses of 1.1 dB are obtained at the frequency of 220 GHz. In addition, the fabricated PDC exhibits a regular hexadecagonal external contour, defined by a dimension of $\Phi 81.6\times \delta 24.5$ mm. Characterized by compact, low-loss, and miniaturized longitudinal length as well as excellent power-handling capability, the PDC is well-suited for power dividing and combining by solid-state or vacuum electronic devices, thereby supporting the development of high-efficiency and high-power terahertz (THz) sources.
- 21 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72  (7) , 3854-3860
Demonstration of an Upgrading G-Band Rhombic Grating Slotted Sine Waveguide TWT
In this article, a novel rhombic grating slotted sine waveguide (RGS-SWG) is proposed for high-power terahertz traveling-wave tube (THz TWT), which has been conceived, fabricated, and tested. By reconfiguring a previously reported staggered U-shaped groove sine waveguide (SUGSWG) from a rectangular grating to a rhombus grating, the RGS-SWG represents the low ohmic loss (32% lower) and high interaction impedance (23% higher) under similar dispersion properties. Particle-in-cell (PIC) simulation results showcase that the maximum saturation output power and efficiency bandwidth product (EBP) of RGS-SWG TWT are 226 W and 148%â‹…GHz, which are 26% and 32% larger than those of the SUGSWG TWT under the same operating voltage of 23 kV and current of 126 mA. Subsequently, a G-band electron gun and double periodic permanent magnetic focusing system were designed for a circular electron beam to pass through the circuit tunnel without being intercepted. Finally, the nano computer numerical control technology was used to realize the fabrication and transmission test of the novel RGS-SWG slow wave structure (SWS). The cold test results demonstrate that the ohmic loss at 220 GHz is 0.15 dB/mm, and the measurement results agree well with the theoretical design of S parameters in the operating frequency band, which verifies the possibility of realizing this novel RGS-SWG structure and validates the remarkable potential in RGS-SWG TWTs for THz applications.
- 21 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72  (7) , 3854-3860
Demonstration of an Upgrading G-Band Rhombic Grating Slotted Sine Waveguide TWT
In this article, a novel rhombic grating slotted sine waveguide (RGS-SWG) is proposed for high-power terahertz traveling-wave tube (THz TWT), which has been conceived, fabricated, and tested. By reconfiguring a previously reported staggered U-shaped groove sine waveguide (SUGSWG) from a rectangular grating to a rhombus grating, the RGS-SWG represents the low ohmic loss (32% lower) and high interaction impedance (23% higher) under similar dispersion properties. Particle-in-cell (PIC) simulation results showcase that the maximum saturation output power and efficiency bandwidth product (EBP) of RGS-SWG TWT are 226 W and 148%â‹…GHz, which are 26% and 32% larger than those of the SUGSWG TWT under the same operating voltage of 23 kV and current of 126 mA. Subsequently, a G-band electron gun and double periodic permanent magnetic focusing system were designed for a circular electron beam to pass through the circuit tunnel without being intercepted. Finally, the nano computer numerical control technology was used to realize the fabrication and transmission test of the novel RGS-SWG slow wave structure (SWS). The cold test results demonstrate that the ohmic loss at 220 GHz is 0.15 dB/mm, and the measurement results agree well with the theoretical design of S parameters in the operating frequency band, which verifies the possibility of realizing this novel RGS-SWG structure and validates the remarkable potential in RGS-SWG TWTs for THz applications.
- 1 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72  (6) , 3213-3218
Comparative Study and Fabrication of Two Miniaturized Terahertz Waveguide Mode Converters for Vacuum Electron Devices
The design, fabrication, and test of two types G-band broadband and low-loss rectangular TE10 to circular TE01-mode converters for vacuum electron devices are introduced in this article, including Marie-mode converter and serpentine-mode converter. Following micromachining and modified microelectroforming processes, the Marie-mode converter with abnormal shape inside and the serpentine-mode converter are successfully fabricated. The dimensions and performances of the two types of mode converters, such as the S-parameters and the mode converter efficiencies, are compared accordingly. Test results of two identical back-to-back joined mode converters verified that both mode converters are with a bandwidth of more than 40 GHz for the reflection coefficient S11 are below -15 dB and S21 are better than -1 dB. Meanwhile, the Marie-mode converter is featured with shorter length and integrated structure, while the serpentine-mode converter is featured with wider bandwidth and simple fabrication processes. The miniaturized mode converters and their micromanufacture technologies indicate significant potentials for vacuum electron devices in the millimeter-wave and terahertz spectrum.
- 1 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72  (6) , 3213-3218
Comparative Study and Fabrication of Two Miniaturized Terahertz Waveguide Mode Converters for Vacuum Electron Devices
The design, fabrication, and test of two types G-band broadband and low-loss rectangular TE10 to circular TE01-mode converters for vacuum electron devices are introduced in this article, including Marie-mode converter and serpentine-mode converter. Following micromachining and modified microelectroforming processes, the Marie-mode converter with abnormal shape inside and the serpentine-mode converter are successfully fabricated. The dimensions and performances of the two types of mode converters, such as the S-parameters and the mode converter efficiencies, are compared accordingly. Test results of two identical back-to-back joined mode converters verified that both mode converters are with a bandwidth of more than 40 GHz for the reflection coefficient S11 are below -15 dB and S21 are better than -1 dB. Meanwhile, the Marie-mode converter is featured with shorter length and integrated structure, while the serpentine-mode converter is featured with wider bandwidth and simple fabrication processes. The miniaturized mode converters and their micromanufacture technologies indicate significant potentials for vacuum electron devices in the millimeter-wave and terahertz spectrum.
- 7 October 2024
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 45  (11-12) , 1029-1039
Investigation and Fabrication of a Low Loss and Wideband Single Crystal Diamond Vacuum Window for W-Band Traveling Wave Tube
- 7 October 2024
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 45  (11-12) , 1029-1039
Investigation and Fabrication of a Low Loss and Wideband Single Crystal Diamond Vacuum Window for W-Band Traveling Wave Tube
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45  (10) , 1981-1984
Investigation and Batch Fabrication of G-Band Broad Band and Low Loss Monocrystalline Diamond Window for Vacuum Electron Devices
The batch fabrication of G-band broad band and low loss pill-box window with monocrystalline diamond (MD) is introduced in this letter. Design and thermal simulations demonstrate advantages over sapphire, including the broader frequency band and the greater heat dissipation capacity. Following chemical vapor deposition (CVD) production, the surface roughness and the thickness deviation of the MD sheets are effectively controlled within 0.5nm and 5μm by polishing technology, respectively. Tiny ring regions on the sheet are metallized using the Ti-Mo-Ni magnetron sputtering technology, followed by vacuum brazing. Test results for batch fabrication show a 90% yield with a vacuum leak rate of less than 5×10 -12 Pa·m 3 /s and a 10% (20GHz) relative bandwidth with S 21 >-1dB and S 11 <-10dB simultaneously. The MD window products indicate significant potential for applications in broad-band and high-power terahertz vacuum electron devices.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45  (10) , 1981-1984
Investigation and Batch Fabrication of G-Band Broad Band and Low Loss Monocrystalline Diamond Window for Vacuum Electron Devices
The batch fabrication of G-band broad band and low loss pill-box window with monocrystalline diamond (MD) is introduced in this letter. Design and thermal simulations demonstrate advantages over sapphire, including the broader frequency band and the greater heat dissipation capacity. Following chemical vapor deposition (CVD) production, the surface roughness and the thickness deviation of the MD sheets are effectively controlled within 0.5nm and 5μm by polishing technology, respectively. Tiny ring regions on the sheet are metallized using the Ti-Mo-Ni magnetron sputtering technology, followed by vacuum brazing. Test results for batch fabrication show a 90% yield with a vacuum leak rate of less than 5×10 -12 Pa·m 3 /s and a 10% (20GHz) relative bandwidth with S 21 >-1dB and S 11 <-10dB simultaneously. The MD window products indicate significant potential for applications in broad-band and high-power terahertz vacuum electron devices.
- 29 January 2024
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 45  (3-4) , 171-183
Design and Experiment of a Sheet Beam Gun for Extended Interaction Oscillator
- 29 January 2024
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 45  (3-4) , 171-183
Design and Experiment of a Sheet Beam Gun for Extended Interaction Oscillator