Mingyue Wu

1. Cement materials have become one of the indispensable materials in construction engineering due to their excellent mechanical properties, durability, and cost-effectiveness [1–3]. However, their...

The extraction of coal from open-pit mines significantly contributes to environmental degradation, posing grave risks to human health and the operational stability of machinery. In this milieu, microbial dust suppressants leveraging microbially induced carbonate precipitation (MICP) demonstrate substantial potential for application. This manuscript undertakes an exploration of the dust mitigation efficiency, consolidation attributes, and the fundamental mechanisms of microbial dust suppressants across coal dust samples with varying metamorphic gradations. Empirical observations indicate that, in resistance tests against wind and rain, lignite coal underwent mass losses of 7.43 g·m⁻²·min⁻¹ and 98.62 g·m⁻²·min⁻¹, respectively. The production of consolidating agents within the lignite dust, attributable to the microbial suppressants, was measured at 0.15 g per unit mass, a value of 1.25 and 1.07 times greater than that observed in bituminous coal and anthracite, respectively. Scanning electron microscopy coupled with X-ray energy-dispersive spectroscopy (SEM–EDS) and X-ray diffraction (XRD) analyses illuminated that the consolidating products within the coal dust predominantly constituted calcite and vaterite forms of calcium carbonate. The consolidation mechanism of coal dust via microbial suppressants is articulated as follows: Subsequent to the application on coal dust, the suppressants induce the formation of carbonate precipitates with inherent adhesive properties. These carbonates affix to the surfaces of coal dust particles, progressively encapsulating them. Furthermore, they play a pivotal role in bridging and filling the interstices between adjacent dust particles, thereby culminating in the genesis of a dense, cohesive mass capable of withstanding erosive forces.

The extraction of coal from open-pit mines significantly contributes to environmental degradation, posing grave risks to human health and the operational stability of machinery. In this milieu, microbial dust suppressants leveraging Microbially Induced Carbonate Precipitation (MICP) demonstrate substantial potential for application. This manuscript undertakes an exploration of the dust mitigation efficiency, consolidation attributes, and the fundamental mechanisms of microbial dust suppressants across coal dust samples with varying metamorphic gradations. Empirical observations indicate that, in resistance tests against wind and rain, lignite coal underwent mass losses of 7.43 g·m^-2·min^-1 and 98.62 g·m^-2·min^-1, respectively. The production of consolidating agents within the lignite dust, attributable to the microbial suppressants, was measured at 0.15 g per unit mass, a value 1.25 and 1.07 times greater than that observed in bituminous coal and anthracite, respectively. Scanning Electron Microscopy coupled with X-ray Energy Dispersive Spectroscopy (SEM-EDS) and X-ray Diffraction (XRD) analyses illuminated that the consolidating products within the coal dust predominantly constituted calcite and vaterite forms of calcium carbonate. The consolidation mechanism of coal dust via microbial suppressants is articulated as follows: Subsequent to the application on coal dust, the suppressants induce the formation of carbonate precipitates with inherent adhesive properties. These carbonates affix to the surfaces of coal dust particles, progressively encapsulating them. Furthermore, they play a pivotal role in bridging and filling the interstices between adjacent dust particles, thereby culminating in the genesis of a dense, cohesive mass capable of withstanding erosive forces.

In addressing the issue of poor gas sensitivity in semiconductor CO sensor materials used in mining, such as pure PANI. This study utilized an ice‐water bath in combination with an in‐situ polymerization method to synthesize a new composite material consisting of Cu(II)‐racemic glutamate nanofibers and PANI. The morphology, structure, and chemical bonds of the composite material were analyzed using scanning electron microscopy‐energy dispersive spectroscopy (SEM‐EDS) and spectral analysis. The material's ability to detect CO (100–500 ppm) at room temperature was investigated, revealing a response value of up to 6.8 % for 400 ppm CO detection when the composite material was deposited on a ceramic interdigital electrode. The material exhibited good selectivity and responsiveness to CO detection at room temperature, attributed to the heterojunction formed between Cu(II)‐racemic glutamate nanofibers and PANI, which enhanced carrier migration. Consequently, the Cu(II)‐racemic glutamate nanofiber/PANI composite(Cu(II)‐RGlu/PANI) material shows promise as a high‐performance sensing material for CO detection at room temperature and as a low‐power, integrable sensor material for underground coal mines. This research contributes to the development of a theoretical framework for such applications.