Zhi-Guo Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhi-Guo Li has a total of 120 co-authors. Here are the top co-authors by number of shared publications:
- Xiang-Rong Chen
Sichuan University
8 shared publications - Qi-Feng Chen
Southwest University of Science and Technology
7 shared publications Lei Liu
Southwest University of Science and Technology
6 shared publications- Lei Liu
Southwest University of Science and Technology
6 shared publications - Fei-Yang Xu
Institute of Fluid Physics, China Academy of Engineering Physics
5 shared publications - Jianbo Hu
State Key Laboratory for Environment-Friendly Energy Materials, Southwest University of Science and Technology 1 , Mianyang 621010
5 shared publications
Latest Publications
Decoupling Mechanical Strength and Ion Transport in Copolymer Electrolytes for Stable Lithium Metal Batteries
Solid polymer electrolytes (SPEs) are critical for lithium metal batteries (LMBs), yet their practical application is hindered by the intrinsic trade‐off between mechanical strength and ionic transport. Herein, a copolymer electrolyte (RFPE) integrating a rigid styrene sulfonate (SS) backbone and flexible ethylene glycol methyl ether methacrylate (EGMEM) domains is developed to simultaneously achieve high mechanical robustness and fast Li + transport. The flexible EGMEM domains facilitate rapid Li + migration and enhanced chain mobility, while the rigid SS backbone provides mechanical reinforcement and stabilizes the electrode/electrolyte interface. Benefiting from this synergistic and decoupled design, the RFPE‐1.0 delivers a higher ionic conductivity of 8.42 × 10 −4 S cm −1 and a Li + transference number of 0.737 at 30°C. The RFPE‐1.0 enables stable Li/Li symmetric cell cycling for over 2800 hours and maintains 131.09 mAh g −1 after 200 cycles at 0.5 C in LiFePO 4 full cells. Moreover, pouch cells further display stable output even under severe mechanical abuse. This work provides an effective strategy for designing high‐performance and safe polymer electrolytes for advanced LMBs.
Decoupling Mechanical Strength and Ion Transport in Copolymer Electrolytes for Stable Lithium Metal Batteries
Solid polymer electrolytes (SPEs) are critical for lithium metal batteries (LMBs), yet their practical application is hindered by the intrinsic trade‐off between mechanical strength and ionic transport. Herein, a copolymer electrolyte (RFPE) integrating a rigid styrene sulfonate (SS) backbone and flexible ethylene glycol methyl ether methacrylate (EGMEM) domains is developed to simultaneously achieve high mechanical robustness and fast Li + transport. The flexible EGMEM domains facilitate rapid Li + migration and enhanced chain mobility, while the rigid SS backbone provides mechanical reinforcement and stabilizes the electrode/electrolyte interface. Benefiting from this synergistic and decoupled design, the RFPE‐1.0 delivers a higher ionic conductivity of 8.42 × 10 −4 S cm −1 and a Li + transference number of 0.737 at 30°C. The RFPE‐1.0 enables stable Li/Li symmetric cell cycling for over 2800 hours and maintains 131.09 mAh g −1 after 200 cycles at 0.5 C in LiFePO 4 full cells. Moreover, pouch cells further display stable output even under severe mechanical abuse. This work provides an effective strategy for designing high‐performance and safe polymer electrolytes for advanced LMBs.
- 15 July 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (3)
Atomic mechanism for elastic–plastic behaviors of uranium-6 wt. % niobium single crystal alloy under shock compressions
The absence of an elastic precursor (EP) in shock-loaded U-6 wt. % Nb alloys has long been attributed to the rapid shear stress relaxation due to phase transformation or twinning. As a first step toward uncovering such issues, we investigate the shock responses of uranium-6 wt. % niobium single-crystal alloys through large-scale non-equilibrium molecular dynamics simulations combined with first-principles calculations. Our results suggest that no clear EP is observed for shocks along the b and c axes, while an EP emerges along the a axis under certain conditions. The EP disappearance stems from a slower elastic-wave velocity compared to the plastic wave velocity—a direct consequence of enhanced compression modulus during shock compression. The modulus enhancement in the α″ phase is attributed to the first stage of a two-stage plastic mechanism: picosecond-scale stress decay via coordinated (001)-plane shuffling forms a transient intermediate phase, followed by a much longer timescale γ-phase transformation through [100]/[1¯00] shear on (010) planes, generating {112}〈111〉 twins. This mechanism underscores the critical role of transient intermediate phases under rapid compression, challenging prior interpretations and providing atomic-scale insights for the shock responses of uranium alloys.
- 15 July 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (3)
Atomic mechanism for elastic–plastic behaviors of uranium-6 wt. % niobium single crystal alloy under shock compressions
The absence of an elastic precursor (EP) in shock-loaded U-6 wt. % Nb alloys has long been attributed to the rapid shear stress relaxation due to phase transformation or twinning. As a first step toward uncovering such issues, we investigate the shock responses of uranium-6 wt. % niobium single-crystal alloys through large-scale non-equilibrium molecular dynamics simulations combined with first-principles calculations. Our results suggest that no clear EP is observed for shocks along the b and c axes, while an EP emerges along the a axis under certain conditions. The EP disappearance stems from a slower elastic-wave velocity compared to the plastic wave velocity—a direct consequence of enhanced compression modulus during shock compression. The modulus enhancement in the α″ phase is attributed to the first stage of a two-stage plastic mechanism: picosecond-scale stress decay via coordinated (001)-plane shuffling forms a transient intermediate phase, followed by a much longer timescale γ-phase transformation through [100]/[1¯00] shear on (010) planes, generating {112}〈111〉 twins. This mechanism underscores the critical role of transient intermediate phases under rapid compression, challenging prior interpretations and providing atomic-scale insights for the shock responses of uranium alloys.
- Open Access
- 16 June 2026
- Published by Elsevier in SSRN Electronic Journal
Design of Multilayer Heterogeneous Graded Density Impactor for Planarity-improved in the Enhanced Hypervelocity Launcher
To accurately understand the response behavior of critical materials under extremely high pressures, the secondary flyer launched by the enhanced launcher cannot simultaneously possess both the characteristics of high terminal velocity and planarity. This study addresses this challenge through hydrodynamic simulations, proposing a novel graded density impactor (GDI) design featuring edge profiles governed by power functions and a localized high-density layer. Numerical results reveal the existence of an effective loading area within the GDI, suggesting that the launcher's performance can be maintained even with a reduced-mass impactor. The proposed multilayer heterogeneous graded density impactor (MHGDI) effectively modulates both the lateral convergence pressure and the central reflection pressure, significantly extending the loading duration. This mechanism enhances the terminal velocity of the secondary flyer from 11.92 km/s to 13.35 km/s (a 12% increase). Simultaneously, the induced radial velocity gradient acts as a compensatory mechanism to optimize planarity, reducing the impact time difference across a 2-mm target region from 2.71 ns to a mere 0.35 ns (an 88% improvement). This synergistic design strategy provides a robust framework for GDI optimization, expanding the capabilities of three-stage gas gun technology in the field of hypervelocity impact.
- 16 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDesign of Multilayer Heterogeneous Graded Density Impactor for Planarity-improved in the Enhanced Hypervelocity Launcher
To accurately understand the response behavior of critical materials under extremely high pressures, the secondary flyer launched by the enhanced launcher cannot simultaneously possess both the characteristics of high terminal velocity and planarity. This study addresses this challenge through hydrodynamic simulations, proposing a novel graded density impactor (GDI) design featuring edge profiles governed by power functions and a localized high-density layer. Numerical results reveal the existence of an effective loading area within the GDI, suggesting that the launcher's performance can be maintained even with a reduced-mass impactor. The proposed multilayer heterogeneous graded density impactor (MHGDI) effectively modulates both the lateral convergence pressure and the central reflection pressure, significantly extending the loading duration. This mechanism enhances the terminal velocity of the secondary flyer from 11.92 km/s to 13.35 km/s (a 12% increase). Simultaneously, the induced radial velocity gradient acts as a compensatory mechanism to optimize planarity, reducing the impact time difference across a 2-mm target region from 2.71 ns to a mere 0.35 ns (an 88% improvement). This synergistic design strategy provides a robust framework for GDI optimization, expanding the capabilities of three-stage gas gun technology in the field of hypervelocity impact.
- 14 October 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 112 (4) , 045312
Structure evolution and transport properties of melt under mantle conditions from deep potential simulationsSilicate melts play a crucial role in shaping Earth's geological features and influencing various geophysical phenomena. Transport properties of silicate melts control magma ocean dynamics on the early terrestrial planets and affect the chemical structure of Earth's deep interior. Here we have developed a deep-learning potential to investigate the structural evolution and transport properties of CaSiO_{3} melt, a major component of basaltic magmas that is expected to exist in Earth's lower mantle. Our findings reveal that, with increasing compression, the average Si-O coordination number shows a nearly linear increase from fourfold at ambient pressure to sixfold in the lower mantle, with fivefold coordination serving as a transition state. The Ca-O coordination trend under compression parallels that of Si-O, except that sixfold coordination dominates at ambient pressure, while ninefold prevails at lower mantle pressure. At high pressures, the temporal evolution of cation-oxygen bonding exhibits frequent bond-breaking events. Meanwhile, the quantified lifetimes of different cation-oxygen species show that Ca species act as network modifiers, whereas Si species function as network formers. The calculated diffusion coefficients align favorably with available first-principles data, except in the supercooled state transition region. Between 2500 and 5000 K, viscosity increases with pressure, which can be attributed to enhanced structural polymerization due to the increased abundance of highly coordinated cation species. These insights into the CaSiO_{3} melt could provide a fundamental basis for understanding the dynamics of magma ocean evolution.
- 14 October 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 112 (4) , 045312
Structure evolution and transport properties of melt under mantle conditions from deep potential simulationsSilicate melts play a crucial role in shaping Earth's geological features and influencing various geophysical phenomena. Transport properties of silicate melts control magma ocean dynamics on the early terrestrial planets and affect the chemical structure of Earth's deep interior. Here we have developed a deep-learning potential to investigate the structural evolution and transport properties of CaSiO_{3} melt, a major component of basaltic magmas that is expected to exist in Earth's lower mantle. Our findings reveal that, with increasing compression, the average Si-O coordination number shows a nearly linear increase from fourfold at ambient pressure to sixfold in the lower mantle, with fivefold coordination serving as a transition state. The Ca-O coordination trend under compression parallels that of Si-O, except that sixfold coordination dominates at ambient pressure, while ninefold prevails at lower mantle pressure. At high pressures, the temporal evolution of cation-oxygen bonding exhibits frequent bond-breaking events. Meanwhile, the quantified lifetimes of different cation-oxygen species show that Ca species act as network modifiers, whereas Si species function as network formers. The calculated diffusion coefficients align favorably with available first-principles data, except in the supercooled state transition region. Between 2500 and 5000 K, viscosity increases with pressure, which can be attributed to enhanced structural polymerization due to the increased abundance of highly coordinated cation species. These insights into the CaSiO_{3} melt could provide a fundamental basis for understanding the dynamics of magma ocean evolution.
- 4 August 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 112 (5)
Shock equation of state and critical vaporization of from ab initio simulations- 4 August 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 112 (5)
Shock equation of state and critical vaporization of from ab initio simulations- 9 March 2025
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 490, 137861
Sequential anaerobic-aerobic photocatalytic degradation of halogenated organic pollutants via dual-site confined carbon nitride
- 9 March 2025
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 490, 137861
Sequential anaerobic-aerobic photocatalytic degradation of halogenated organic pollutants via dual-site confined carbon nitride
- 15 July 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (3)
Large-scale simulation of thermal conductivity in CaSiO3 perovskite with neuroevolution potential
Lattice thermal conductivity (klat) of mantle minerals is a key factor in determining the Earth's energy budget and influences its dynamic processes. Here, we trained a neuroevolution machine learning potential for CaSiO3 perovskite (CaPv), the third most abundant mineral of the lower mantle, to investigate the klat of pyrolitic aggregates at the core–mantle boundary (CMB). We show that the klat of two types of pyrolitic aggregates has increased by 7% and 5% upon the addition of CaPv, demonstrating its significance in shaping the thermal structure of Earth's interior. Considering other mantle minerals and iron content, as well as the global distribution of temperature, we evaluated the heat flow across the CMB to be 7.98 ± 0.4 TW. The estimated heat flow is inconsistent with the value derived from the Fe alloy, which might suggest the presence of a thermally or chemically stratified layer atop the outer core.
- 15 July 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (3)
Large-scale simulation of thermal conductivity in CaSiO3 perovskite with neuroevolution potential
Lattice thermal conductivity (klat) of mantle minerals is a key factor in determining the Earth's energy budget and influences its dynamic processes. Here, we trained a neuroevolution machine learning potential for CaSiO3 perovskite (CaPv), the third most abundant mineral of the lower mantle, to investigate the klat of pyrolitic aggregates at the core–mantle boundary (CMB). We show that the klat of two types of pyrolitic aggregates has increased by 7% and 5% upon the addition of CaPv, demonstrating its significance in shaping the thermal structure of Earth's interior. Considering other mantle minerals and iron content, as well as the global distribution of temperature, we evaluated the heat flow across the CMB to be 7.98 ± 0.4 TW. The estimated heat flow is inconsistent with the value derived from the Fe alloy, which might suggest the presence of a thermally or chemically stratified layer atop the outer core.
- 22 April 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (14) , 144109
Ultrahigh pressure shock compression of platinum up to 1.1 TPa: Melting and ionization
Shock compression experiments on platinum (Pt) were carried out by combining a two-stage gas gun with the unique high-Z three-stage gas gun launcher technique. The shock Hugoniot of Pt was determined in a wide pressure range of 0.2–1.1 TPa. These data fill the gap between the two-stage gas gun and magnetically driven shock experiments, and thereby we observe a clear softening behavior of the Pt Hugoniot at the beginning of ∼1.1 TPa. Ab initio molecular dynamics simulations were also performed to reveal the response of Pt under ultrahigh pressure compressions. The simulation results show that the melting of Pt under shock compression occurs at ∼570 GPa, and a sudden increase in conductivity and free electron number density emerges at the beginning of the Hugoniot softening. The further electronic structure calculations indicate that the Hugoniot softening may arise from the thermal excitation (ionization) of the electrons and the localized electrons in Pt under extreme shock compression. This work has gained further insight into the ionization behaviors of high-Z metal elements with complex electronic structures under ultrahigh pressure compressions, which is of significance for understanding the partial ionization effect in the transition region from condensed matter to warm dense matter.- 22 April 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (14) , 144109
Ultrahigh pressure shock compression of platinum up to 1.1 TPa: Melting and ionization
Shock compression experiments on platinum (Pt) were carried out by combining a two-stage gas gun with the unique high-Z three-stage gas gun launcher technique. The shock Hugoniot of Pt was determined in a wide pressure range of 0.2–1.1 TPa. These data fill the gap between the two-stage gas gun and magnetically driven shock experiments, and thereby we observe a clear softening behavior of the Pt Hugoniot at the beginning of ∼1.1 TPa. Ab initio molecular dynamics simulations were also performed to reveal the response of Pt under ultrahigh pressure compressions. The simulation results show that the melting of Pt under shock compression occurs at ∼570 GPa, and a sudden increase in conductivity and free electron number density emerges at the beginning of the Hugoniot softening. The further electronic structure calculations indicate that the Hugoniot softening may arise from the thermal excitation (ionization) of the electrons and the localized electrons in Pt under extreme shock compression. This work has gained further insight into the ionization behaviors of high-Z metal elements with complex electronic structures under ultrahigh pressure compressions, which is of significance for understanding the partial ionization effect in the transition region from condensed matter to warm dense matter.- Open Access
- 25 March 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (12)
Probing the critical point of MgSiO3 using deep potential simulation
The giant impact between proto-Earth and a Mars-sized planet called Theia resulted in the formation of the Earth–Moon system, and the silicate mantles of the initial bodies may have partly been vaporized. Here, we develop a machine learning potential for MgSiO3 based on the data from first-principles calculations to estimate its critical point. The variations in pressure along different isotherms yield the position of the critical point of MgSiO3 at 0.54 g cm−3 and 6750 ± 250 K, which agrees with the previous theoretical estimation. We also simulate the MgSiO3 melt under a spectrum of critical conditions to understand the changes in coordination environment with density and temperature. The fourfold Si–O coordination hardly changes with increasing density at 3000 K. However, with increasing temperature, the dominance of four-coordinated Si–O diminishes rapidly as density decreases. Regarding Mg–O coordination, the overall trend, which varies with temperature and density, remains largely consistent with Si–O but with a greater diversity in the types of coordination due to more bond breaking events. Our work opens a new avenue by employing machine learning methods to estimate the critical point of silicates.
- 25 March 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (12)
Open AccessProbing the critical point of MgSiO3 using deep potential simulation
The giant impact between proto-Earth and a Mars-sized planet called Theia resulted in the formation of the Earth–Moon system, and the silicate mantles of the initial bodies may have partly been vaporized. Here, we develop a machine learning potential for MgSiO3 based on the data from first-principles calculations to estimate its critical point. The variations in pressure along different isotherms yield the position of the critical point of MgSiO3 at 0.54 g cm−3 and 6750 ± 250 K, which agrees with the previous theoretical estimation. We also simulate the MgSiO3 melt under a spectrum of critical conditions to understand the changes in coordination environment with density and temperature. The fourfold Si–O coordination hardly changes with increasing density at 3000 K. However, with increasing temperature, the dominance of four-coordinated Si–O diminishes rapidly as density decreases. Regarding Mg–O coordination, the overall trend, which varies with temperature and density, remains largely consistent with Si–O but with a greater diversity in the types of coordination due to more bond breaking events. Our work opens a new avenue by employing machine learning methods to estimate the critical point of silicates.