Jianli Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianli Zhao has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Yingjie Li
Shandong University
3 shared publications - Xianyao Yan
Shandong Engineering Laboratory for High-efficiency Energy Conservation and Energy Storage Technology & Equipment, School of Energy and Power Engineering, Shandong University, Jinan 250061, China
2 shared publications Chunmei Lu
School of Energy and Power Engineering Shandong University Jinan 250061 P.R. China
1 shared publication- Chunxiao Zhang
Shandong Engineering Laboratory for High-efficiency Energy Conservation and Energy Storage Technology & Equipment, School of Energy and Power Engineering, Shandong University, Jinan 250061, China
1 shared publication Kuihua Han
School of Energy and Power Engineering Shandong University Jinan 250061 P.R. China
1 shared publicationShengli Niu
School of Energy and Power Engineering Shandong University Jinan 250061 P.R. China
1 shared publication
Latest Publications
- Open Access
Development of Thermochemical Heat Storage Based on CaO/CaCO3 Cycles: A Review
Due to the inconsistency and intermittence of solar energy, concentrated solar power (CSP) cannot stably transmit energy to the grid. Heat storage can maximize the availability of CSP plants. Especially, thermochemical heat storage (TCHS) based on CaO/CaCO3 cycles has broad application prospects due to many advantages, such as high heat storage density, high exothermic temperature, low energy loss, low material price, and good coupling with CSP plants. This paper provided a comprehensive outlook on the integrated system of CaO/CaCO3 heat storage, advanced reactor design, heat storage conditions, as well as the performance of CaO-based materials. The challenges and opportunities faced by current research were discussed, and suggestions for future research and development directions of CaO/CaCO3 heat storage were briefly put forward.
Open AccessDevelopment of Thermochemical Heat Storage Based on CaO/CaCO3 Cycles: A Review
Due to the inconsistency and intermittence of solar energy, concentrated solar power (CSP) cannot stably transmit energy to the grid. Heat storage can maximize the availability of CSP plants. Especially, thermochemical heat storage (TCHS) based on CaO/CaCO3 cycles has broad application prospects due to many advantages, such as high heat storage density, high exothermic temperature, low energy loss, low material price, and good coupling with CSP plants. This paper provided a comprehensive outlook on the integrated system of CaO/CaCO3 heat storage, advanced reactor design, heat storage conditions, as well as the performance of CaO-based materials. The challenges and opportunities faced by current research were discussed, and suggestions for future research and development directions of CaO/CaCO3 heat storage were briefly put forward.
- Open Access
- 20 February 2019
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 20 (4) , 928
Performance of Li4SiO4 Material for CO2 Capture: A Review
Lithium silicate (Li4SiO4) material can be applied for CO2 capture in energy production processes, such as hydrogen plants, based on sorption-enhanced reforming and fossil fuel-fired power plants, which has attracted research interests of many researchers. However, CO2 absorption performance of Li4SiO4 material prepared by the traditional solid-state reaction method is unsatisfactory during the absorption/regeneration cycles. Improving CO2 absorption capacity and cyclic stability of Li4SiO4 material is a research highlight during the energy production processes. The state-of-the-art kinetic and quantum mechanical studies on the preparation and CO2 absorption process of Li4SiO4 material are summarized, and the recent studies on the effects of preparation methods, dopants, and operating conditions on CO2 absorption performance of Li4SiO4 material are reviewed. Additionally, potential research thoughts and trends are also suggested.
- 20 February 2019
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 20 (4) , 928
Open AccessPerformance of Li4SiO4 Material for CO2 Capture: A Review
Lithium silicate (Li4SiO4) material can be applied for CO2 capture in energy production processes, such as hydrogen plants, based on sorption-enhanced reforming and fossil fuel-fired power plants, which has attracted research interests of many researchers. However, CO2 absorption performance of Li4SiO4 material prepared by the traditional solid-state reaction method is unsatisfactory during the absorption/regeneration cycles. Improving CO2 absorption capacity and cyclic stability of Li4SiO4 material is a research highlight during the energy production processes. The state-of-the-art kinetic and quantum mechanical studies on the preparation and CO2 absorption process of Li4SiO4 material are summarized, and the recent studies on the effects of preparation methods, dopants, and operating conditions on CO2 absorption performance of Li4SiO4 material are reviewed. Additionally, potential research thoughts and trends are also suggested.
- Open Access
- 29 July 2018
- Published by MDPI AG in Sustainability
- Vol. 10 (8) , 2660
Development on Thermochemical Energy Storage Based on CaO-Based Materials: A Review
The intermittent and inconsistent nature of some renewable energy, such as solar and wind, means the corresponding plants are unable to operate continuously. Thermochemical energy storage (TES) is an essential way to solve this problem. Due to the advantages of cheap price, high energy density, and ease to scaling, CaO-based material is thought as one of the most promising storage mediums for TES. In this paper, TES based on various cycles, such as CaO/CaCO3 cycles, CaO/Ca(OH)2 cycles, and coupling of CaO/Ca(OH)2 and CaO/CaCO3 cycles, were reviewed. The energy storage performances of CaO-based materials, as well as the modification approaches to improve their performance, were critically reviewed. The natural CaO-based materials for CaO/Ca(OH)2 TES experienced the multiple hydration/dehydration cycles tend to suffer from severe sintering which leads to the low activity and structural stability. It is found that higher dehydration temperature, lower initial sample temperature of the hydration reaction, higher vapor pressure in the hydration reactor, and the use of circulating fluidized bed (CFB) reactors all can improve the energy storage performance of CaO-based materials. In addition, the energy storage performance of CaO-based materials for CaO/Ca(OH)2 TES can be effectively improved by the various modification methods. The additions of Al2O3, Na2Si3O7, and nanoparticles of nano-SiO2 can improve the structural stabilities of CaO-based materials, while the addition of LiOH can improve the reactivities of CaO-based materials. This paper is devoted to a critical review on the development on thermochemical energy storage based on CaO-based materials in the recent years.
- 29 July 2018
- Published by MDPI AG in Sustainability
- Vol. 10 (8) , 2660
Open AccessDevelopment on Thermochemical Energy Storage Based on CaO-Based Materials: A Review
The intermittent and inconsistent nature of some renewable energy, such as solar and wind, means the corresponding plants are unable to operate continuously. Thermochemical energy storage (TES) is an essential way to solve this problem. Due to the advantages of cheap price, high energy density, and ease to scaling, CaO-based material is thought as one of the most promising storage mediums for TES. In this paper, TES based on various cycles, such as CaO/CaCO3 cycles, CaO/Ca(OH)2 cycles, and coupling of CaO/Ca(OH)2 and CaO/CaCO3 cycles, were reviewed. The energy storage performances of CaO-based materials, as well as the modification approaches to improve their performance, were critically reviewed. The natural CaO-based materials for CaO/Ca(OH)2 TES experienced the multiple hydration/dehydration cycles tend to suffer from severe sintering which leads to the low activity and structural stability. It is found that higher dehydration temperature, lower initial sample temperature of the hydration reaction, higher vapor pressure in the hydration reactor, and the use of circulating fluidized bed (CFB) reactors all can improve the energy storage performance of CaO-based materials. In addition, the energy storage performance of CaO-based materials for CaO/Ca(OH)2 TES can be effectively improved by the various modification methods. The additions of Al2O3, Na2Si3O7, and nanoparticles of nano-SiO2 can improve the structural stabilities of CaO-based materials, while the addition of LiOH can improve the reactivities of CaO-based materials. This paper is devoted to a critical review on the development on thermochemical energy storage based on CaO-based materials in the recent years.
- 27 November 2014
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 93 (3) , 532-537
Dissolution characteristics of calcium‐based alkaline industrial derived wastes
Accurately evaluating the rate at which calcium‐based alkaline industrial derived wastes (CAIDW) dissolve is very important in the design and development of CAIDW‐type wet flue gas desulfurization plants. The dissolution characteristics of alkaline slag (AS) and salt mud (SM) have been studied using pH stat method, and the effects of various parameters such as reaction temperature, sorbent particle size and solution acidity are studied to determine the dissolution kinetics of AS and SM. The production process of CAIDW presents high influence on its dissolution performance in acidic conditions. The kinetics analysis based on the modified shrinking core model (MSCM) indicates that AS dissolution kinetics, which is accompanied by surface reaction control, follows the film diffusion, and the activation energies of the two steps are 4.62 ± 0.8 and 36.34 ± 3.1 kJ/mol, respectively. Meanwhile, the SM dissolution obeys the surface reaction model with the activation energy of 9.69 ± 1.9 kJ/mol.
- 27 November 2014
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 93 (3) , 532-537
Dissolution characteristics of calcium‐based alkaline industrial derived wastes
Accurately evaluating the rate at which calcium‐based alkaline industrial derived wastes (CAIDW) dissolve is very important in the design and development of CAIDW‐type wet flue gas desulfurization plants. The dissolution characteristics of alkaline slag (AS) and salt mud (SM) have been studied using pH stat method, and the effects of various parameters such as reaction temperature, sorbent particle size and solution acidity are studied to determine the dissolution kinetics of AS and SM. The production process of CAIDW presents high influence on its dissolution performance in acidic conditions. The kinetics analysis based on the modified shrinking core model (MSCM) indicates that AS dissolution kinetics, which is accompanied by surface reaction control, follows the film diffusion, and the activation energies of the two steps are 4.62 ± 0.8 and 36.34 ± 3.1 kJ/mol, respectively. Meanwhile, the SM dissolution obeys the surface reaction model with the activation energy of 9.69 ± 1.9 kJ/mol.