Emilio Martínez Rodríguez
Research Subjects
Emilio Martínez Rodríguez has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Juarez Benigno Paes
Department of Forest and Wood Sciences, Federal University of Espírito Santo, Jerônimo Monteiro, Brazil
3 shared publications - Yonny Martinez Lopez
Federal University of the South and Southeast of Para
3 shared publications - Fabricio Gomes Gonçalves
Federal University of Espírito Santo
2 shared publications Donatian Gustave
DEPARTMENT OF AGRICULTURE, FISHERIES, NATURAL RESOURCES AND COOPERATIVES GABRIEL CHARLES FORESTRY COMPLEX UNION SAINT LUCIA
1 shared publication- Pedro Nicó de Medeiros Neto
Universidade Federal de Campina Grande
1 shared publication
Latest Publications
- Open Access
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Floresta e Ambiente
- Vol. 27 (2)
Physico-Mechanical Properties of Wood-Plastic Produced with Forest Species and Thermoplastic Materials
This research aims to evaluate the physico-mechanical properties of wood-plastic composites produced with recycled polyethylene terephthalate, high-density polyethylene, low-density polyethylene and polypropylene, and sawdust from the following species: Pinus caribaea, Pinus cubensis, Cedrela odorata, Talipariti elatum and Eucalyptus sp. Composites were obtained by extrusion with dimension of 1,000 × 250 × 16 mm (length × width × thickness), through six treatments. The following physico-mechanical properties were evaluated: density, moisture content, water absorption and thickness swelling, compression, static bending and traction. Treatment 6 obtained the best results, with 1,060 kg m-3 density, 5.23% moisture content, 0.32% water absorption, and 0.18% thickness swelling. Compressive strength was 138.10 MPa, static bending 18.53 MPa, and traction 29.4 MPa. The technology developed has prospects for large-scale production.
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Floresta e Ambiente
- Vol. 27 (2)
Open AccessPhysico-Mechanical Properties of Wood-Plastic Produced with Forest Species and Thermoplastic Materials
This research aims to evaluate the physico-mechanical properties of wood-plastic composites produced with recycled polyethylene terephthalate, high-density polyethylene, low-density polyethylene and polypropylene, and sawdust from the following species: Pinus caribaea, Pinus cubensis, Cedrela odorata, Talipariti elatum and Eucalyptus sp. Composites were obtained by extrusion with dimension of 1,000 × 250 × 16 mm (length × width × thickness), through six treatments. The following physico-mechanical properties were evaluated: density, moisture content, water absorption and thickness swelling, compression, static bending and traction. Treatment 6 obtained the best results, with 1,060 kg m-3 density, 5.23% moisture content, 0.32% water absorption, and 0.18% thickness swelling. Compressive strength was 138.10 MPa, static bending 18.53 MPa, and traction 29.4 MPa. The technology developed has prospects for large-scale production.
- Open Access
- 1 December 2018
- Published by FapUNIFESP (SciELO) in CERNE
- Vol. 24 (4) , 369-378
WOOD PARTICLEBOARDS REINFORCED WITH THERMOPLASTICS TO IMPROVE THICKNESS SWELLING AND MECHANICAL PROPERTIES
The manufacture of forest products with high physical and mechanical properties contribute to the development of the forest industry in obtaining more resistant products with potential in the construction sector. In this context, to contribute to the study of reconstituted panels this article discusses the manufacture of panels reinforced with recycled thermoplastics (WPC), which had as raw material sawdust of Pinus caribaea and as recycled thermoplastics polyethylene terephthalate, low-density polyethylene and polypropylene. The panels were obtained by extrusion and developed in four treatments with different proportions of raw material. Thickness swelling rates of the manufactured WPC were evaluated by immersing them in water at room temperature and monitoring thickness changes for several weeks. A swelling model developed by Saeed Kazemi Najafi was used to study the thickness swelling process of WPC. The WPC were characterized by thickness swelling, apparent density, static blending, longitudinal compression and tensile strength. The treatment with 50% sawdust and blend of all thermoplastics (T5) showed a tendency to reduce the thickness swelling because it absorbs 0.28% of water and maintains the balance of water absorption in 16.2% the apparent density was 1206 kgm-3. For the mechanical properties, the static blending, longitudinal compression and tensile strength are around 24.6, 142.4 and 32.8 MPa, respectively. These characteristics make a treatment the best response. Hence, is suggested this board be used for structural applications, such as interior or exterior walls, since the water absorption index is low and high mechanical properties allow being more resistant.
- 1 December 2018
- Published by FapUNIFESP (SciELO) in CERNE
- Vol. 24 (4) , 369-378
Open AccessWOOD PARTICLEBOARDS REINFORCED WITH THERMOPLASTICS TO IMPROVE THICKNESS SWELLING AND MECHANICAL PROPERTIES
The manufacture of forest products with high physical and mechanical properties contribute to the development of the forest industry in obtaining more resistant products with potential in the construction sector. In this context, to contribute to the study of reconstituted panels this article discusses the manufacture of panels reinforced with recycled thermoplastics (WPC), which had as raw material sawdust of Pinus caribaea and as recycled thermoplastics polyethylene terephthalate, low-density polyethylene and polypropylene. The panels were obtained by extrusion and developed in four treatments with different proportions of raw material. Thickness swelling rates of the manufactured WPC were evaluated by immersing them in water at room temperature and monitoring thickness changes for several weeks. A swelling model developed by Saeed Kazemi Najafi was used to study the thickness swelling process of WPC. The WPC were characterized by thickness swelling, apparent density, static blending, longitudinal compression and tensile strength. The treatment with 50% sawdust and blend of all thermoplastics (T5) showed a tendency to reduce the thickness swelling because it absorbs 0.28% of water and maintains the balance of water absorption in 16.2% the apparent density was 1206 kgm-3. For the mechanical properties, the static blending, longitudinal compression and tensile strength are around 24.6, 142.4 and 32.8 MPa, respectively. These characteristics make a treatment the best response. Hence, is suggested this board be used for structural applications, such as interior or exterior walls, since the water absorption index is low and high mechanical properties allow being more resistant.
- Open Access
- 17 May 2018
- Published by Instituto de Ecologia, A.C. in Madera y Bosques
- Vol. 24 (2)
Propiedades ignífugas de tableros de madera plástica producidos con diferentes especies forestales y termoplásticos reciclados
Los residuos de madera y termoplásticos pueden ser usados para producir nuevos productos forestales con mejores propiedades y mayor valor agregado. El objetivo de la investigación fue evaluar las propiedades ignífugas de tableros de madera plástica elaborados a partir de residuos madereros (aserrín) de diferentes especies forestales (Pinus caribaea, Pinus cubensis, Cedrela odorata, Talipariti elatus y Eucalyptus sp.), termoplásticos reciclados (polietileno de baja y alta densidad, tereftalato de polietileno y polipropileno), aditivos químicos (carbonato de calcio, ácido esteárico, estearato de calcio, estearato de zinc y agente de liga) y tetrabrik como retardante de llama. Los tableros fueron producidos a escala de laboratorio y procesados mediante extrusión. Las propiedades ignífugas fueron evaluadas mediante los ensayos de reacción y resistencia al fuego según indicaciones de la Norma Europea (UNE EN) 13823. Los tratamientos desarrollados mostraron buena respuesta en cuanto a reacción y resistencia al fuego; el tratamiento 6 mostró los mejores resultados. La extracción de la resina a la madera de las especies de pino permitió que los tableros mejoraran sus propiedades ignífugas. Los niveles más altos en cuanto a los efectos del fuego se pueden alcanzar mediante la mezcla de todas las materias primas en proporciones equitativas, las cuales aportan a los tableros mejores propiedades. La metodología propuesta para la producción de tableros de madera plástica puede ser desarrollada a gran escala por la industria de tableros, dado su bajo costo-calidad-beneficio. De esa forma se puede dar un uso sustentable a residuos industriales, propiciando su reconversión en materiales útiles para la sociedad.
- 17 May 2018
- Published by Instituto de Ecologia, A.C. in Madera y Bosques
- Vol. 24 (2)
Open AccessPropiedades ignífugas de tableros de madera plástica producidos con diferentes especies forestales y termoplásticos reciclados
Los residuos de madera y termoplásticos pueden ser usados para producir nuevos productos forestales con mejores propiedades y mayor valor agregado. El objetivo de la investigación fue evaluar las propiedades ignífugas de tableros de madera plástica elaborados a partir de residuos madereros (aserrín) de diferentes especies forestales (Pinus caribaea, Pinus cubensis, Cedrela odorata, Talipariti elatus y Eucalyptus sp.), termoplásticos reciclados (polietileno de baja y alta densidad, tereftalato de polietileno y polipropileno), aditivos químicos (carbonato de calcio, ácido esteárico, estearato de calcio, estearato de zinc y agente de liga) y tetrabrik como retardante de llama. Los tableros fueron producidos a escala de laboratorio y procesados mediante extrusión. Las propiedades ignífugas fueron evaluadas mediante los ensayos de reacción y resistencia al fuego según indicaciones de la Norma Europea (UNE EN) 13823. Los tratamientos desarrollados mostraron buena respuesta en cuanto a reacción y resistencia al fuego; el tratamiento 6 mostró los mejores resultados. La extracción de la resina a la madera de las especies de pino permitió que los tableros mejoraran sus propiedades ignífugas. Los niveles más altos en cuanto a los efectos del fuego se pueden alcanzar mediante la mezcla de todas las materias primas en proporciones equitativas, las cuales aportan a los tableros mejores propiedades. La metodología propuesta para la producción de tableros de madera plástica puede ser desarrollada a gran escala por la industria de tableros, dado su bajo costo-calidad-beneficio. De esa forma se puede dar un uso sustentable a residuos industriales, propiciando su reconversión en materiales útiles para la sociedad.