Yi Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yi Pan has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Fei Mei
College of Energy and Electrical Engineering, Hohai University, Nanjing 211100, China
6 shared publications - Jianyong Zheng
School of Electrical Engineering, Southeast University, Nanjing 210096, China
5 shared publications - Cheng Zhou
School of Electrical Engineering, Southeast University, Nanjing 210096, China
2 shared publications - Haoyuan Sha
School of Electrical Engineering, Southeast University, Nanjing 210096, China
2 shared publications - Jianzhang Wu
School of Electrical Engineering, Southeast University, Nanjing 210096, China
2 shared publications - Jixiang Lu
NARI Group Corporation (State Grid Electric Power Research Institute)
2 shared publications
Latest Publications
- Open Access
Phase Space Reconstruction Algorithm and Deep Learning-Based Very Short-Term Bus Load Forecasting
With the refinement and intelligence of power system optimal dispatching, the widespread adoption of advanced grid applications that consider the safety and economy of power systems, and the massive access of distributed energy resources, the requirement for bus load prediction accuracy is continuously increasing. Aiming at the volatility brought about by the large-scale access of new energy sources, the adaptability to different forecasting horizons and the time series characteristics of the load, this paper proposes a phase space reconstruction (PSR) and deep belief network (DBN)-based very short-term bus load prediction model. Cross-validation is also employed to optimize the structure of the DBN. The proposed PSR-DBN very short-term bus load forecasting model is verified by applying the real measured load data of a substation. The results prove that, when compared to other alternative models, the PSR-DBN model has higher prediction accuracy and better adaptability for different forecasting horizons in the case of high distributed power penetration and large fluctuation of bus load.
Open AccessPhase Space Reconstruction Algorithm and Deep Learning-Based Very Short-Term Bus Load Forecasting
With the refinement and intelligence of power system optimal dispatching, the widespread adoption of advanced grid applications that consider the safety and economy of power systems, and the massive access of distributed energy resources, the requirement for bus load prediction accuracy is continuously increasing. Aiming at the volatility brought about by the large-scale access of new energy sources, the adaptability to different forecasting horizons and the time series characteristics of the load, this paper proposes a phase space reconstruction (PSR) and deep belief network (DBN)-based very short-term bus load prediction model. Cross-validation is also employed to optimize the structure of the DBN. The proposed PSR-DBN very short-term bus load forecasting model is verified by applying the real measured load data of a substation. The results prove that, when compared to other alternative models, the PSR-DBN model has higher prediction accuracy and better adaptability for different forecasting horizons in the case of high distributed power penetration and large fluctuation of bus load.
- Open Access
Operation Optimization of Multi-District Integrated Energy System Considering Flexible Demand Response of Electric and Thermal Loads
Multi-district integrated energy system (IES) can make full use of the complementary characteristics of district power and thermal system, and loads in different districts. It can improve the flexibility and economy of system operation, which has a good development prospect. Firstly, based on the general energy transfer model of the district heating network (DHN), the DHN system is described by the basic equations of the heating network and nodes considering the characteristics of the transmission time delay and heat loss in pipelines. A coupling model of DHN and multi-district IES is established. Secondly, the flexible demand response (FDR) model of electric and thermal loads is established. The load characteristics of each district in IES are studied. A shiftable load model based on the electric quantity balance is constructed. Considering the flexibility of the heat demand, a thermal load adjustment model based on the comfort constraint is constructed to make the thermal load elastic and controllable in time and space. Finally, a mixed integer linear programming (MILP) model for operation optimization of multi-district IES with the DHN considering the FDR of electric and thermal loads is established based on the supply and demand sides. The result shows that the proposed model makes full use of the complementary characteristics of electric and thermal loads in different districts. It realizes the coordinated distribution of thermal energy among different districts and improves the efficiency of thermal energy utilization through the DHN. FDR effectively reduces the peak-valley difference of loads. It further reduces the total operating cost by the coordinated operation of the DHN and multi-district IES.
Open AccessOperation Optimization of Multi-District Integrated Energy System Considering Flexible Demand Response of Electric and Thermal Loads
Multi-district integrated energy system (IES) can make full use of the complementary characteristics of district power and thermal system, and loads in different districts. It can improve the flexibility and economy of system operation, which has a good development prospect. Firstly, based on the general energy transfer model of the district heating network (DHN), the DHN system is described by the basic equations of the heating network and nodes considering the characteristics of the transmission time delay and heat loss in pipelines. A coupling model of DHN and multi-district IES is established. Secondly, the flexible demand response (FDR) model of electric and thermal loads is established. The load characteristics of each district in IES are studied. A shiftable load model based on the electric quantity balance is constructed. Considering the flexibility of the heat demand, a thermal load adjustment model based on the comfort constraint is constructed to make the thermal load elastic and controllable in time and space. Finally, a mixed integer linear programming (MILP) model for operation optimization of multi-district IES with the DHN considering the FDR of electric and thermal loads is established based on the supply and demand sides. The result shows that the proposed model makes full use of the complementary characteristics of electric and thermal loads in different districts. It realizes the coordinated distribution of thermal energy among different districts and improves the efficiency of thermal energy utilization through the DHN. FDR effectively reduces the peak-valley difference of loads. It further reduces the total operating cost by the coordinated operation of the DHN and multi-district IES.
- Open Access
- 9 April 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (7) , 1487
An Ultrashort-Term Net Load Forecasting Model Based on Phase Space Reconstruction and Deep Neural Network
Recently, a large number of distributed photovoltaic (PV) power generations have been connected to the power grid, which resulted in an increased fluctuation of the net load. Therefore, load forecasting has become more difficult. Considering the characteristics of the net load, an ultrashort-term forecasting model based on phase space reconstruction and deep neural network (DNN) is proposed, which can be divided into two steps. First, the phase space reconstruction of the net load time series data is performed using the C-C method. Second, the reconstructed data is fitted by the DNN to obtain the predicted value of the net load. The performance of this model is verified using real data. The accuracy is high in forecasting the net load under high PV penetration rate and different weather conditions.
- 9 April 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (7) , 1487
Open AccessAn Ultrashort-Term Net Load Forecasting Model Based on Phase Space Reconstruction and Deep Neural Network
Recently, a large number of distributed photovoltaic (PV) power generations have been connected to the power grid, which resulted in an increased fluctuation of the net load. Therefore, load forecasting has become more difficult. Considering the characteristics of the net load, an ultrashort-term forecasting model based on phase space reconstruction and deep neural network (DNN) is proposed, which can be divided into two steps. First, the phase space reconstruction of the net load time series data is performed using the C-C method. Second, the reconstructed data is fitted by the DNN to obtain the predicted value of the net load. The performance of this model is verified using real data. The accuracy is high in forecasting the net load under high PV penetration rate and different weather conditions.
- Open Access
Identification Method for Voltage Sags Based on K-means-Singular Value Decomposition and Least Squares Support Vector Machine
Voltage sag is one of the most serious problems in power quality. The occurrence of voltage sag will lead to a huge loss in the social economy and have a serious effect on people’s daily life. The identification of sag types is the basis for solving the problem and ensuring the safe grid operation. Therefore, with the measured data uploaded by the sag monitoring system, this paper proposes a sag type identification algorithm based on K-means-Singular Value Decomposition (K-SVD) and Least Squares Support Vector Machine (LS-SVM). Firstly; each phase of the sag sample RMS data is sparsely coded by the K-SVD algorithm and the sparse coding information of each phase data is used as the feature matrix of the sag sample. Then the LS-SVM classifier is used to identify the sag type. This method not only works without any dependence on the sag data feature extraction by artificial ways, but can also judge the short-circuit fault phase, providing more effective information for the repair of grid faults. Finally, based on a comparison with existing methods, the accuracy advantages of the proposed algorithm with be presented.
Open AccessIdentification Method for Voltage Sags Based on K-means-Singular Value Decomposition and Least Squares Support Vector Machine
Voltage sag is one of the most serious problems in power quality. The occurrence of voltage sag will lead to a huge loss in the social economy and have a serious effect on people’s daily life. The identification of sag types is the basis for solving the problem and ensuring the safe grid operation. Therefore, with the measured data uploaded by the sag monitoring system, this paper proposes a sag type identification algorithm based on K-means-Singular Value Decomposition (K-SVD) and Least Squares Support Vector Machine (LS-SVM). Firstly; each phase of the sag sample RMS data is sparsely coded by the K-SVD algorithm and the sparse coding information of each phase data is used as the feature matrix of the sag sample. Then the LS-SVM classifier is used to identify the sag type. This method not only works without any dependence on the sag data feature extraction by artificial ways, but can also judge the short-circuit fault phase, providing more effective information for the repair of grid faults. Finally, based on a comparison with existing methods, the accuracy advantages of the proposed algorithm with be presented.
- Open Access
Online Recognition Method for Voltage Sags Based on a Deep Belief Network
Voltage sag is a serious power quality phenomenon that threatens industrial manufacturing and residential electricity. A large-scale monitoring system has been established and continually improved to detect and record voltage sag events. However, the inefficient process of data sampling cannot provide valuable information early enough for governance of the system. Therefore, a novel online recognition method for voltage sags is proposed. The main contributions of this paper include: 1) The causes and waveform characters of voltage sags were analyzed; 2) according to the characters of different sag waveforms, 10 voltage sag characteristic parameters were proposed and proven to be effective; 3) a deep belief network (DBN) model was built using these parameters to complete automatic recognition of the sag event types. Experiments were conducted using voltage sag data from one month recorded by the 10 kV monitoring points in Suqian, Jiangsu Province, China. The results showed good performance of the proposed method: Recognition accuracy was 96.92%. The test results from the proposed method were compared to the results from support vector machine (SVM) recognition methods. The proposed method was shown to outperform SVM.
Open AccessOnline Recognition Method for Voltage Sags Based on a Deep Belief Network
Voltage sag is a serious power quality phenomenon that threatens industrial manufacturing and residential electricity. A large-scale monitoring system has been established and continually improved to detect and record voltage sag events. However, the inefficient process of data sampling cannot provide valuable information early enough for governance of the system. Therefore, a novel online recognition method for voltage sags is proposed. The main contributions of this paper include: 1) The causes and waveform characters of voltage sags were analyzed; 2) according to the characters of different sag waveforms, 10 voltage sag characteristic parameters were proposed and proven to be effective; 3) a deep belief network (DBN) model was built using these parameters to complete automatic recognition of the sag event types. Experiments were conducted using voltage sag data from one month recorded by the 10 kV monitoring points in Suqian, Jiangsu Province, China. The results showed good performance of the proposed method: Recognition accuracy was 96.92%. The test results from the proposed method were compared to the results from support vector machine (SVM) recognition methods. The proposed method was shown to outperform SVM.
- Open Access
- 15 March 2018
- Published by MDPI AG in Sustainability
- Vol. 10 (3) , 820
A Hybrid Online Forecasting Model for Ultrashort-Term Photovoltaic Power Generation
A hybrid photovoltaic (PV) forecasting model is proposed for the ultrashort-term prediction of PV output. The model contains two parts: offline modeling and online forecasting. The offline module uses historical monitoring data to establish a weather type classification model and PV output regression submodels. The online module uses real-time monitoring data for weather type identification on target days and the forecasting of irradiation intensity and temperature time series. The appropriate regression submodel can be selected based on the subsequent results, and the ultrashort-term real-time forecasting of PV output can be performed over a short time scale. The model incorporates power generation and historical meteorological data from the PV station and is suitable for practical engineering applications. In addition to the irradiation intensity and temperature, other factors related to photovoltaic output are evaluated; however, they are excluded from the model for simplicity and efficiency. The performance of the model is verified by practical modeling analysis.
- 15 March 2018
- Published by MDPI AG in Sustainability
- Vol. 10 (3) , 820
Open AccessA Hybrid Online Forecasting Model for Ultrashort-Term Photovoltaic Power Generation
A hybrid photovoltaic (PV) forecasting model is proposed for the ultrashort-term prediction of PV output. The model contains two parts: offline modeling and online forecasting. The offline module uses historical monitoring data to establish a weather type classification model and PV output regression submodels. The online module uses real-time monitoring data for weather type identification on target days and the forecasting of irradiation intensity and temperature time series. The appropriate regression submodel can be selected based on the subsequent results, and the ultrashort-term real-time forecasting of PV output can be performed over a short time scale. The model incorporates power generation and historical meteorological data from the PV station and is suitable for practical engineering applications. In addition to the irradiation intensity and temperature, other factors related to photovoltaic output are evaluated; however, they are excluded from the model for simplicity and efficiency. The performance of the model is verified by practical modeling analysis.