DWDavid Weisberg

David Weisberg

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


David Weisberg has a total of 256 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative study of nitrogen and neon seeding impacts on divertor detachment and core confinement in DIII-D high- β p plasmas with ITER-similar shape

    by D.G. Wu, L.Y. Meng, L. Wang, A.M. Garofalo, X.Z. Gong, H.Q. Wang, S. Ding, X. Jian, X.H. Wu, J. Huang, et al.

    Divertor detachment experiments with nitrogen ( N 2 ) and neon (Ne) seeding have been performed in DIII-D high- β p scenario at q 95 ∼ 6 , and the impacts of impurity seeding on divertor detachment and plasma confinement have been studied. Experimental results demonstrate that both N 2 and Ne seeding could effectively reduce the electron temperature at the divertor target ( T et ). The reduction in particle flux ( j sat ) is significantly more pronounced with N 2 seeding, indicating a superior capability of N 2 to facilitate deep particle detachment compared to Ne under these conditions. SOLPS-ITER simulations corroborate these findings, as the parallel momentum balance analysis reveals that N 2 particles are predominantly retained in the divertor region, facilitating strong radiative dissipation near the target with minimal core penetration. In contrast, Ne particles could penetrate upstream, ionize inside the separatrix and lead to higher core radiation. Consequently, the stronger power and momentum loss in the scrape-off layer (SOL) with N 2 seeding is the key to achieve lower T et and j sat compared to Ne seeding. Furthermore, statistical results suggest that the plasma confinement is maintained with both impurities, as the formation of large-radius internal transport barrier (ITB) compensates for pedestal degradation. Notably, the ITB formed with Ne seeding case is substantially stronger than that with N 2 seeding. TGYRO simulations indicate that for Ne seeding case, toroidal rotation shear and the E × B shear play minor roles in ITB formation. Instead, the dominant stabilizing mechanism is identified as the redistribution of the current density and the reduction of magnetic shear at large radius, which is strongly promoted by Ne seeding but only weakly influenced by N 2 seeding. These results provide a comprehensive perspective on the impact of N 2 and Ne seeding on detachment and plasma confinement sustainment in DIII-D high- β p operations, offering valuable insights into optimizing the core-edge integration in future fusion reactors.

  • Neutron Irradiation Experiments to Support Fusion Blanket Development

    by Chase N. Taylor, Pattrick Calderoni, Xiao-Ying Yu, David X. Fischer, Thomas F. Fuerst, David Weisberg

  • Top Cited Papers
    Open Access

    Exploring the fusion power plant design space: comparative analysis of positive and negative triangularity tokamaks through optimization

    by T. Slendebroek, A.O. Nelson, O.M. Meneghini, G. Dose, A.G. Ghiozzi, J. Harvey, B.C. Lyons, J. McClenaghan, T.F. Neiser, D.B. Weisberg, et al.

    The optimal configuration choice between positive triangularity (PT) and negative triangularity (NT) tokamaks for fusion power plants hinges on navigating different operational constraints rather than achieving specific plasma performance metrics. This study presents a systematic comparison using constrained multi-objective optimization with the integrated FUsion Synthesis Engine (FUSE) framework. Over 200 000 integrated design evaluations were performed exploring the trade-offs between capital cost minimization and operational reliability (maximizing q 95 ) while satisfying engineering constraints including 250 ± 50 MW net electric power, tritium breeding ratio > 1.1, power exhaust limits and an hour flattop time. Both configurations achieve similar cost-performance Pareto fronts through contrasting design philosophies. PT, while demonstrating resilience to pedestal degradation (compensating for up to 40% reduction), are constrained to larger machines ( R 0 > 6.5 m) by the narrow operational window between L–H threshold requirements and the research-established power exhaust limit ( P sol / R < 15 MW m −1 ). This forces optimization through comparatively reduced magnetic field (∼8 T). NT configurations exploit their freedom from these constraints to access compact, high-field designs ( R 0 ∼ 5.5 m, B 0 > 12 T), creating natural synergy with advancing HTS technology. Sensitivity analyses reveal that PT’s economic viability depends critically on uncertainties in L–H threshold scaling and power handling limits. Notably, a 50% variation in either could eliminate viable designs or enable access to the compact design space. These results suggest configuration selection should be risk-informed: PT offers the lowest-cost path when operational constraints can be confidently predicted, while NT is robust to large variations in constraints and physics uncertainties.


  • Open Access

    Metrics and extrapolation of resonant magnetic perturbation thresholds for ELM suppression

    by Nikolas Logan, SangKyeun Kim, SeongMoo Yang, Jong-Kyu Park, Qiming Hu, Nils Leuthold, Carlos Paz-Soldan, Shuai Gu, David B Weisberg, Hui-Hui Wang, et al.

    This large database study of resonant magnetic perturbation (RMP) edge localized mode (ELM) suppression thresholds in the AUG, DIII-D, EAST, and KSTAR tokamaks details the key strengths and weaknesses of RMP metrics. The RMP ELM suppression database used for this work contains plasma information at the time of transition from ELMing to ELM suppressed states where a clear experimental threshold is identified. The experimental threshold distributions are compared for five metrics: (1) the island overlap width, (2) pedestal top Chirikov overlap, (3) peeling edge displacement, (4) pedestal top resonant drive, and (5) edge dominant mode overlap. The distributions, the regularity of the dependence on RMP coil currents, and the sensitivities of a given metric to equilibrium reconstruction details are compared. The overlap metric proves to be a good compromise between including the appropriate plasma response physics and maintaining a numerical robustness. This quantity does not exhibit clear power-law scalings for projection, but machine learning can assist in predicting thresholds within the existing parameter ranges and providing uncertainty quantification of those predictions. Two new first-principles models, one utilizing a threshold from the non-linear Modified Rutherford equation evaluated at the pedestal top and one utilizing the SLAYER code to calculate the linear tearing threshold from torque balance, offer possible paths to extrapolation beyond the existing database parameter space.


  • Open Access

    Turbulence suppression at extreme plasma densities on DIII-D and EAST

    by S. Ding, A. M. Garofalo, H. Q. Wang, W. Choi, X. Z. Gong, J. P. Qian, J. Huang, D. Hatch, M. T. Kotschenreuther, S. Mahajan, et al.

    Recent high-poloidal-beta (high-βP) experiments on DIII-D and EAST have made coordinated breakthroughs for high confinement quality at high density near the Greenwald limit. Density gradient amplification of turbulence suppression at high βP can explain both of these achievements. Experiments on DIII-D have achieved Greenwald fraction (fGr = line-averaged density/Greenwald density) above 1 simultaneously with normalized energy confinement (H98y2) around 1.5, as required in fusion reactor designs but never before verified in tokamak experiments with the divertor configuration. A synergy between increased H98y2 and fGr is observed with strong gas puffing, due to the build-up of an internal transport barrier at large radius in the temperature and density channels. Transport simulations reveal that the favorable trend of reduced turbulent energy transport at higher density is only expected when increasing the density gradient at high local safety factor and high β, thus at high βP to ensure strong α-stabilization. These conditions are crucial to many conceptual designs for steady-state reactors. New experiments on EAST have nearly doubled the ion temperature at fGr ∼ 0.9, consistent with predict-first modeling results based on the same physics revealed from the DIII-D analysis. All previous EAST long-pulse H-modes have Ti ≪ Te near plasma axis. Transport modeling indicates that the profiles are limited by ion-temperature-gradient modes at mid-radius. The modeling also suggested potential solutions, including reducing magnetic shear, enhancing density gradients, and higher impurity concentration. Following this guidance, EAST experiments directly show a strong enhancement of Ti achieved with a combination of a second plasma current ramp-up, a density gradient increase, and a Zeff perturbation by a short pulse (100 ms) of impurity injection, as predicted by the earlier modeling.


  • Open Access

    Plasma performance and operational space with an RMP-ELM suppressed edge

    by Carlos Paz-Soldan, Shuai Gu, Nils Leuthold, Priyansh Lunia, Pengcheng Xie, Minwoo Kim, SangKyeun Kim, Nikolas Logan, Jong-Kyu Park, Wolfgang Suttrop, et al.

    The operational space and global performance of plasmas with edge-localized modes (ELMs) suppressed by resonant magnetic perturbations (RMPs) are surveyed by comparing AUG, DIII-D, EAST, and KSTAR stationary operating points. RMP-ELM suppression is achieved over a range of plasma currents, toroidal fields, and RMP toroidal mode numbers. Consistent operational windows in edge safety factor are found across devices, while windows in plasma shaping parameters are distinct. Accessed pedestal parameters reveal a quantitatively similar pedestal-top density limit for RMP-ELM suppression in all devices of just over 3 × 10 19 m−3. This is surprising given the wide variance of many engineering parameters and edge collisionalities, and poses a challenge to extrapolation of the regime. Wide ranges in input power, confinement time, and stored energy are observed, with the achieved triple product found to scale like the product of current, field, and radius. Observed energy confinement scaling with engineering parameters for RMP-ELM suppressed plasmas are presented and compared with expectations from established H and L-mode scalings, including treatment of uncertainty analysis. Different scaling exponents for individual engineering parameters are found as compared to the established scalings. However, extrapolation to next-step tokamaks ITER and SPARC find overall consistency within uncertainties with the established scalings, finding no obvious performance penalty when extrapolating from the assembled multi-device RMP-ELM suppressed database. Overall this work identifies common physics for RMP-ELM suppression and highlights the need to pursue this no-ELM regime at higher magnetic field and different plasma physical size.


  • Open Access

    Compatibility of divertor detachment and ELM suppression in DIII-D high- β p plasmas with ITER-similar shape

    by D.G. Wu, L. Wang, H.Q. Wang, A.M. Garofalo, X.Z. Gong, S. Ding, Y.F. Wang, H. Lan, N. Yan, J. McClenaghan, et al.

    Integration of transient and steady-state divertor heat fluxes control with a high-performance core is necessary for future fusion reactors. In recent DIII-D high- β p experiments, divertor detachment and simultaneous edge localized mode (ELM) suppression are demonstrated while the plasma confinement quality is maintained high in ITER-similar shape. By optimizing the neon injection in high- β p scenario with ITER-similar shape, deep detachment and ELM suppression are achieved with a high-performance core ( β N ∼ 2.8, β p ∼ 2.3) at q 95 ∼ 7.5. Partial divertor detachment and suppression of large ELMs are achieved at q 95 ∼ 6. The stability analyses suggest that with low neon injection, the density pedestal becomes higher and steeper and the T i profile also increases, therefore the increased edge pressure and higher current density destabilize the Peeling-Ballooning mode (PBM), which would lead to a large ELM collapse. With strong neon gas puffing, the significantly reduced pedestal pressure and current density, due to the degraded T e pedestal, lead to the stabilization of PBM and ELMs are suppressed. For both cases, the coupling between the large radius internal transport barrier (ITB) and edge pedestal is the key reason for maintaining high global performance. The formation of large radius ITB compensates for pedestal degradation. Such results could provide an attractive scenario to well control the transient and steady-state heat flux onto the divertor plates while maintaining good plasma performance, which is an important step toward the steady-state operation of future fusion reactors.


  • Open Access

    GATM: A 3-D FE Fusion Magnet Model and Application to DIII-D and Next-Generation Devices

    by James A. Leuer, D. Weisberg, R. MacDonald, I. Favela, Paul Beharrell, D. Appelt, R. Buttery, C. Crowe, N. Eidietis, B. Grierson, et al.

    The General Atomics Tokamak Model (GATM) is a recently developed finite element (FE) environment for assessing the performance of tokamak magnet-plasma systems. Its generic environment is designed to assess magnet performance parameters for existing tokamaks, such as Doublet-III-D (DIII-D) and next-generation tokamak. GATM’s environment consists of a number of models, including a Comsol 3-D FE model and routines connecting this model to other GA tools. GATM consists of a 2-D axisymmetric module characterizing Poloidal Fields (PFs) system magnetic properties, including an equilibrium fitting code (EFIT) plasma representation. The 2-D module contains a central solenoid (CS) structural model for stress and deflection assessment. Toroidal field (TF) coils are characterized by a 3-D magnetics module for TF calculations and simulation of TF nonaxisymmetric ripple. PF and TF magnetics models provide input to a 3-D TF structural module, which simulates both in-plane and out-of-plane stress. A 3-D TF center post module uses input from the other three modules to evaluate the performance of a superconducting coil including details of the case, winding-pack, and superconducting cable. Model geometry, (Plasma, TF, CS, PF, and structures) is fully parametrized and allows for rapid assessment of arbitrary tokamak configurations. The GATM model is under development and is intended to interface with other general atomics models including: GA System Code (GASC), dynamic tokamak system model (TokSys), recently developed FUsion Synthesis Engine (FUSE), and DIII-D database, including EFIT. Models and current states generated in the GATM environment are output to engineering relevant codes ANSYS and SolidWorks. The article provides an overview of the present GATM environment and its application to DIII-D’s TF coil and an advanced tokamak (AT) Fusion Pilot Plant (FPP).


  • Open Access

    Design of passive and structural conductors for tokamaks using thin-wall eddy current modeling

    by A.F. Battey, C. Hansen, D. Garnier, D. Weisberg, C. Paz-Soldan, R. Sweeney, R.A. Tinguely, A.J. Creely

    A new three-dimensional electromagnetic modeling tool (ThinCurr) has been developed using the existing PSI-Tet finite-element code in support of conducting structure design work for both the SPARC and DIII-D tokamaks. Within this framework a 3D conducting structure model was created for both the SPARC and DIII-D tokamaks in the thin-wall limit. This model includes accurate details of the vacuum vessel and other conducting structural elements with realistic material resistivities. This model was leveraged to support the design of a passive runaway electron mitigation coil (REMC), studying the effect of various design parameters, including coil resistivity, current quench duration, and plasma vertical position, on the effectiveness of the coil. The REMC is a non-axisymmetric coil designed to passively drive large non-axisymmetric fields during the plasma disruption thereby destroying flux surfaces and deconfining RE seed populations. These studies indicate that current designs should apply substantial 3D fields at the plasma surface during future plasma current disruptions as well as highlight the importance of having the REMC conductors away from the machine midplane in order to ensure they are robust to off-normal disruption scenarios.


  • Open Access

    Flexible, integrated modeling of tokamak stability, transport, equilibrium, and pedestal physics

    by B. C. Lyons, J. McClenaghan, T. Slendebroek, O. Meneghini, T. F. Neiser, S. P. Smith, D. B. Weisberg, E. A. Belli, J. Candy, J. M. Hanson, et al.

    The STEP (Stability, Transport, Equilibrium, and Pedestal) integrated-modeling tool has been developed in OMFIT to predict stable, tokamak equilibria self-consistently with core-transport and pedestal calculations. STEP couples theory-based codes to integrate a variety of physics, including magnetohydrodynamic stability, transport, equilibrium, pedestal formation, and current-drive, heating, and fueling. The input/output of each code is interfaced with a centralized ITER-Integrated Modelling & Analysis Suite data structure, allowing codes to be run in any order and enabling open-loop, feedback, and optimization workflows. This paradigm simplifies the integration of new codes, making STEP highly extensible. STEP has been verified against a published benchmark of six different integrated models. Core-pedestal calculations with STEP have been successfully validated against individual DIII-D H-mode discharges and across more than 500 discharges of the H98,y2 database, with a mean error in confinement time from experiment less than 19%. STEP has also reproduced results in less conventional DIII-D scenarios, including negative-central-shear and negative-triangularity plasmas. Predictive STEP modeling has been used to assess performance in several tokamak reactors. Simulations of a high-field, large-aspect-ratio reactor show significantly lower fusion power than predicted by a zero-dimensional study, demonstrating the limitations of scaling-law extrapolations. STEP predictions have found promising scenarios for an EXhaust and Confinement Integration Tokamak Experiment, including a high-pressure, 80%-bootstrap-fraction plasma. ITER modeling with STEP has shown that pellet fueling enhances fusion gain in both the baseline and advanced-inductive scenarios. Finally, STEP predictions for the SPARC baseline scenario are in good agreement with published results from the physics basis.