Hongchang Deng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hongchang Deng has a total of 121 co-authors. Here are the top co-authors by number of shared publications:
- Libo Yuan
Guilin University of Electronic Technology
38 shared publications - Ming Chen
Guilin University of Electronic Technology
22 shared publications - Shijie Deng
School of Optoelectronic Engineering, Guilin University of Electronic Technology, Guilin, China
19 shared publications - Houquan Liu
Guilin University of Electronic Technology
18 shared publications - Chuanxin Teng
Guangxi Key Laboratory of Optoelectronic Information Processing, Guilin University of Electronic Technology, Guilin, China
15 shared publications - Hongyan Yang
Guilin University of Electronic Technology
15 shared publications
Latest Publications
- Open Access
- 25 September 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (39)
Self-organized optofluidic locking enables stable single-frequency lasing in dynamic liquid media
Liquid-state lasers are promising wavelength-agile, reconfigurable coherent light sources, but fluid gain media introduce Brownian motion, thermal transport, and refractive-index fluctuations that destabilize single-frequency emission. Here, we demonstrate that nonequilibrium fluid fluctuations can instead be harnessed to stabilize lasing through optofluidic locking. In anisotropic colloidal nanoplatelets (CNPs), a weak auxiliary continuous-wave optical field induces collective particle migration, reorientation, and accumulation via coupled optical forces and convective flow. The resulting self-organized gain landscape suppresses cavity fluctuations, improves output stability by nearly three orders of magnitude, and reduces the lasing threshold by over 75%. Integrated with high-gain CdSe/CdSeS/CdZnS core/graded-crown/graded-shell nanoplatelets and a Littman-like external cavity, this mechanism enables stable single-frequency lasing with a side-mode suppression ratio above 31 dB, a 0.051 nm linewidth, and 170-nm single-mode tunability across engineered CNP gain media. We further demonstrate applications in WS 2 photoluminescence pumping and wavelength-tunable topological vertical-cavity lasing.
- 25 September 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (39)
Open AccessSelf-organized optofluidic locking enables stable single-frequency lasing in dynamic liquid media
Liquid-state lasers are promising wavelength-agile, reconfigurable coherent light sources, but fluid gain media introduce Brownian motion, thermal transport, and refractive-index fluctuations that destabilize single-frequency emission. Here, we demonstrate that nonequilibrium fluid fluctuations can instead be harnessed to stabilize lasing through optofluidic locking. In anisotropic colloidal nanoplatelets (CNPs), a weak auxiliary continuous-wave optical field induces collective particle migration, reorientation, and accumulation via coupled optical forces and convective flow. The resulting self-organized gain landscape suppresses cavity fluctuations, improves output stability by nearly three orders of magnitude, and reduces the lasing threshold by over 75%. Integrated with high-gain CdSe/CdSeS/CdZnS core/graded-crown/graded-shell nanoplatelets and a Littman-like external cavity, this mechanism enables stable single-frequency lasing with a side-mode suppression ratio above 31 dB, a 0.051 nm linewidth, and 170-nm single-mode tunability across engineered CNP gain media. We further demonstrate applications in WS 2 photoluminescence pumping and wavelength-tunable topological vertical-cavity lasing.
- 26 February 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 64 (8) , 1783-1790
Surface plasmon resonance sensor based on a dual-hole optical fiber for temperature and refractive index detection
This paper presents a surface plasmon resonance (SPR) sensor based on a dual-hole optical fiber, designed for the simultaneous measurement of refractive index (RI) and temperature. The sensor is fabricated by side-polishing the dual-hole fiber and coating gold and silver films in the left and right holes, respectively. Additionally, the right hole is filled with polydimethylsiloxane to enable dual-parameter detection. We analyzed the sensor’s performance using the finite element analysis software COMSOL, and the results indicate a peak sensitivity reaching 3000 nm/RIU across an RI interval of 1.34–1.38, along with a temperature sensitivity measured at −4.5nm/∘C within a range spanning from 0°C to 40°C. The proposed dual-hole fiber SPR sensor features a simple structure and demonstrates high sensitivity and effective dual-parameter sensing capabilities. This provides an efficient solution for the simultaneous monitoring of temperature and RI, making it suitable for in situ measurements in applications such as chemical reagent preparation.
- 26 February 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 64 (8) , 1783-1790
Surface plasmon resonance sensor based on a dual-hole optical fiber for temperature and refractive index detection
This paper presents a surface plasmon resonance (SPR) sensor based on a dual-hole optical fiber, designed for the simultaneous measurement of refractive index (RI) and temperature. The sensor is fabricated by side-polishing the dual-hole fiber and coating gold and silver films in the left and right holes, respectively. Additionally, the right hole is filled with polydimethylsiloxane to enable dual-parameter detection. We analyzed the sensor’s performance using the finite element analysis software COMSOL, and the results indicate a peak sensitivity reaching 3000 nm/RIU across an RI interval of 1.34–1.38, along with a temperature sensitivity measured at −4.5nm/∘C within a range spanning from 0°C to 40°C. The proposed dual-hole fiber SPR sensor features a simple structure and demonstrates high sensitivity and effective dual-parameter sensing capabilities. This provides an efficient solution for the simultaneous monitoring of temperature and RI, making it suitable for in situ measurements in applications such as chemical reagent preparation.
- Open Access
- 2 September 2024
- Published by Springer Nature in Microsystems & Nanoengineering
- Vol. 10 (1) , 1-9
Thermo-optical tweezers based on photothermal waveguides
Field-controlled micromanipulation represents a pivotal technique for handling microparticles, yet conventional methods often risk physical damage to targets. Here, we discovered a completely new mechanism for true noncontact manipulation through photothermal effects, called thermal-optical tweezers. We employ a laser self-assembly photothermal waveguide (PTW) for dynamic microparticle manipulation. This waveguide demonstrates superior photothermal conversion and precision control, generating a nonisothermal temperature field. The interaction of thermal convection and thermophoresis within this field creates a microfluidic potential well, enabling noncontact and nondestructive particle manipulation. By varying the path of PTWs in lithography and manipulating laser loading modes, diverse manipulation strategies, such as Z-shaped migration, periodic oscillation, and directional transport, are achievable. Our innovative noninvasive micromanipulation technology minimizes not only physical damage to target objects but also enables precise and diverse manipulation of micro entities, opening up new avenues for the photothermal control of cells and biomolecules.
- 2 September 2024
- Published by Springer Nature in Microsystems & Nanoengineering
- Vol. 10 (1) , 1-9
Open AccessThermo-optical tweezers based on photothermal waveguides
Field-controlled micromanipulation represents a pivotal technique for handling microparticles, yet conventional methods often risk physical damage to targets. Here, we discovered a completely new mechanism for true noncontact manipulation through photothermal effects, called thermal-optical tweezers. We employ a laser self-assembly photothermal waveguide (PTW) for dynamic microparticle manipulation. This waveguide demonstrates superior photothermal conversion and precision control, generating a nonisothermal temperature field. The interaction of thermal convection and thermophoresis within this field creates a microfluidic potential well, enabling noncontact and nondestructive particle manipulation. By varying the path of PTWs in lithography and manipulating laser loading modes, diverse manipulation strategies, such as Z-shaped migration, periodic oscillation, and directional transport, are achievable. Our innovative noninvasive micromanipulation technology minimizes not only physical damage to target objects but also enables precise and diverse manipulation of micro entities, opening up new avenues for the photothermal control of cells and biomolecules.
- 17 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (19) , 7021-7027
A Vector Accelerometer Based on Optical Fiber Cantilever With Hybrid Gratings
We proposed a high sensitivity vector accelerometer. The sensor is a cantilever structure composed of long-period fiber grating (LPFG) and fiber Bragg grating (FBG) in cascade. Its unique structure makes the wavelength drift of the LPFG caused by micro-vibration converted into the reflected light intensity of the FBG, and it is not affected by temperature changes. It has extended single-frequency response spanning from 10 to 5000 Hz, as well as flexible detection of vibration signals. The experimental results show that the output signal of the sensor changes linearly with the vibration acceleration in a certain range of 0.6-10.5 g, its working sensitivity is 1.57 mV/g and the lower limit of measurement can reach 0.03 mg. The direction of acceleration is identified by inducing an asymmetric LPFG structure, the directional test more than 10 dB. Benefiting from small size and high sensitivity, the sensor may have the potential to realize acceleration detection in a harsh environment.
- 17 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (19) , 7021-7027
A Vector Accelerometer Based on Optical Fiber Cantilever With Hybrid Gratings
We proposed a high sensitivity vector accelerometer. The sensor is a cantilever structure composed of long-period fiber grating (LPFG) and fiber Bragg grating (FBG) in cascade. Its unique structure makes the wavelength drift of the LPFG caused by micro-vibration converted into the reflected light intensity of the FBG, and it is not affected by temperature changes. It has extended single-frequency response spanning from 10 to 5000 Hz, as well as flexible detection of vibration signals. The experimental results show that the output signal of the sensor changes linearly with the vibration acceleration in a certain range of 0.6-10.5 g, its working sensitivity is 1.57 mV/g and the lower limit of measurement can reach 0.03 mg. The direction of acceleration is identified by inducing an asymmetric LPFG structure, the directional test more than 10 dB. Benefiting from small size and high sensitivity, the sensor may have the potential to realize acceleration detection in a harsh environment.
- 23 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (7) , 10144-10155
Vector Magnetic Field Sensing Characteristics of the Magnetofluid-Encapsulated Polarization-Maintaining Fiber Single-End Offset Fusion Spliced Hollow-Core Fiber Structure
This paper proposes and demonstrates an optical fiber vector magnetic field sensor based on magnetofluid-encapsulated polarization-maintaining fiber (PMF) single-end offset fusion spliced hollow-core fiber (HCF) structure. Thanks to the unique fast and slow axes structure of the PMF, when the two axes are offset fused with HCF respectively, the sensor exhibits different responses to the magnetic field variation surrounding the fiber sensing structure. Experimental results reveal that at a dislocation offset of 6 μm along the slow axis of the PMF with the HCF, a maximum magnetic field intensity sensitivity of -813 pm/mT and direction sensitivity of 245 pm/° within the range of 39-55 mT are obtained. Moreover, temperature-induced cross-sensitivity is effectively suppressed with dislocation offset of the slow-axis of the PMF fused with the HCF. The proposed magnetic field sensor has several advantages, such as low-cost, easy manufacturing, immune to electromagnet interference, all-optical fiber structure and convenient to fiber-optic multiplexing.
- 23 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (7) , 10144-10155
Vector Magnetic Field Sensing Characteristics of the Magnetofluid-Encapsulated Polarization-Maintaining Fiber Single-End Offset Fusion Spliced Hollow-Core Fiber Structure
This paper proposes and demonstrates an optical fiber vector magnetic field sensor based on magnetofluid-encapsulated polarization-maintaining fiber (PMF) single-end offset fusion spliced hollow-core fiber (HCF) structure. Thanks to the unique fast and slow axes structure of the PMF, when the two axes are offset fused with HCF respectively, the sensor exhibits different responses to the magnetic field variation surrounding the fiber sensing structure. Experimental results reveal that at a dislocation offset of 6 μm along the slow axis of the PMF with the HCF, a maximum magnetic field intensity sensitivity of -813 pm/mT and direction sensitivity of 245 pm/° within the range of 39-55 mT are obtained. Moreover, temperature-induced cross-sensitivity is effectively suppressed with dislocation offset of the slow-axis of the PMF fused with the HCF. The proposed magnetic field sensor has several advantages, such as low-cost, easy manufacturing, immune to electromagnet interference, all-optical fiber structure and convenient to fiber-optic multiplexing.
- 16 January 2024
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 15 (2) , 793-801
Cascaded plastic optical fiber based SPR sensor for simultaneous measurement of refractive index and temperature
A cascaded side-polish plastic optical fiber (POF) and FONTEX optical fiber based surface plasmon resonance (SPR) sensor is proposed for simultaneous measurement of refractive index (RI) and temperature. The side-polish POF and FONTEX optical fiber are connected by using the UV glue in a Teflon plastic tube. The SPR phenomenon can be excited at both of the side-polish region and the FONTEX fiber cladding. The polydimethylsiloxane (PDMS) is coated on the side-polish POF to get a temperature sensing channel. Due to the low RI sensitivity of the FONTEX optical fiber, the cascaded fiber sensor can obtain a broader RI measurement range with a low crosstalk. An RI sensitivity of 700 nm/RIU in the RI measurement range of 1.335-1.39 and a temperature sensitivity of −1.02 nm/°C measured in deionized water with a range of 20-60 °C are obtained. In addition, the cascaded POF based SPR sensor has potential application prospects in the field of biochemical sensing.
- 16 January 2024
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 15 (2) , 793-801
Cascaded plastic optical fiber based SPR sensor for simultaneous measurement of refractive index and temperature
A cascaded side-polish plastic optical fiber (POF) and FONTEX optical fiber based surface plasmon resonance (SPR) sensor is proposed for simultaneous measurement of refractive index (RI) and temperature. The side-polish POF and FONTEX optical fiber are connected by using the UV glue in a Teflon plastic tube. The SPR phenomenon can be excited at both of the side-polish region and the FONTEX fiber cladding. The polydimethylsiloxane (PDMS) is coated on the side-polish POF to get a temperature sensing channel. Due to the low RI sensitivity of the FONTEX optical fiber, the cascaded fiber sensor can obtain a broader RI measurement range with a low crosstalk. An RI sensitivity of 700 nm/RIU in the RI measurement range of 1.335-1.39 and a temperature sensitivity of −1.02 nm/°C measured in deionized water with a range of 20-60 °C are obtained. In addition, the cascaded POF based SPR sensor has potential application prospects in the field of biochemical sensing.
- Open Access
- 12 December 2023
- Published by Springer Nature in Research Square
Thermo-optical tweezers based on photothermal waveguides
Field-controlled micro-manipulation represents a pivotal technique in handling microparticles, yet conventional methods often risk physical damage to the targets. Here, we have discovered a completely new mechanism for truly non-contact manipulation through photothermal effect, called thermal-optical tweezers. we employing a laser-engraved photothermal waveguide for dynamic microparticle manipulation. This waveguide demonstrates superior photothermal conversion and precision control, generating a non-isothermal temperature field. The interaction of thermal convection and thermophoresis within this field creates a microfluidic potential well, enabling non-contact and non-destructive particle manipulation. By varying the path of photothermal waveguides in lithography and the manipulating laser loading modes, diverse manipulation strategies, such as Z-shaped migration, periodic oscillation, and directional transport, are achievable. Our innovative non-invasive micro-manipulation technology not only minimizes physical damage to target objects but also enables precise and diverse manipulation of micro-entities, opening up new avenues in photothermal control of cells and biomolecules.
- 12 December 2023
- Published by Springer Nature in Research Square
Open AccessThermo-optical tweezers based on photothermal waveguides
Field-controlled micro-manipulation represents a pivotal technique in handling microparticles, yet conventional methods often risk physical damage to the targets. Here, we have discovered a completely new mechanism for truly non-contact manipulation through photothermal effect, called thermal-optical tweezers. we employing a laser-engraved photothermal waveguide for dynamic microparticle manipulation. This waveguide demonstrates superior photothermal conversion and precision control, generating a non-isothermal temperature field. The interaction of thermal convection and thermophoresis within this field creates a microfluidic potential well, enabling non-contact and non-destructive particle manipulation. By varying the path of photothermal waveguides in lithography and the manipulating laser loading modes, diverse manipulation strategies, such as Z-shaped migration, periodic oscillation, and directional transport, are achievable. Our innovative non-invasive micro-manipulation technology not only minimizes physical damage to target objects but also enables precise and diverse manipulation of micro-entities, opening up new avenues in photothermal control of cells and biomolecules.
- 20 November 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (23) , 6156-6159
Optical fiber-integrated achromatic metalens based on catenary metasurfaces
A challenge in all-fiber-integrated metasurface devices is to efficiently control dispersion in the limited fiber end area to build metasurfaces, therefore, the design of metasurfaces with a special structure becomes crucial to meet the demands of dispersion control. A unique phase response of circularly polarized light in catenary metasurfaces can offer new opportunities for polarization-sensitive arbitrary chromatic dispersion control. Herein, we proposed an optical achromatic metalens based on equal width catenary metasurfaces integrated on the large-mode optical fiber (LMF) end. To reduce phase distortions, the LMF is designed to generate quasi-plane waves (QPW), and then QPW converts from catenary metasurfaces to realize achromatic focusing. A notable feature of this device is its axial focal length shift as low as 0.09% across the working wavelength range from 1.33 µm to 1.55 µm, commonly used in optical fiber communication, demonstrating its excellent dispersion control capability. Furthermore, the device exhibits exceptional capabilities to break through the diffraction limit of the output field. This research has potential applications in the fields of achromatic devices, chromatic aberration correction, fiber lasers, and optical communication and modulation.
- 20 November 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (23) , 6156-6159
Optical fiber-integrated achromatic metalens based on catenary metasurfaces
A challenge in all-fiber-integrated metasurface devices is to efficiently control dispersion in the limited fiber end area to build metasurfaces, therefore, the design of metasurfaces with a special structure becomes crucial to meet the demands of dispersion control. A unique phase response of circularly polarized light in catenary metasurfaces can offer new opportunities for polarization-sensitive arbitrary chromatic dispersion control. Herein, we proposed an optical achromatic metalens based on equal width catenary metasurfaces integrated on the large-mode optical fiber (LMF) end. To reduce phase distortions, the LMF is designed to generate quasi-plane waves (QPW), and then QPW converts from catenary metasurfaces to realize achromatic focusing. A notable feature of this device is its axial focal length shift as low as 0.09% across the working wavelength range from 1.33 µm to 1.55 µm, commonly used in optical fiber communication, demonstrating its excellent dispersion control capability. Furthermore, the device exhibits exceptional capabilities to break through the diffraction limit of the output field. This research has potential applications in the fields of achromatic devices, chromatic aberration correction, fiber lasers, and optical communication and modulation.
- 13 September 2023
- Published by Optica Publishing Group in Applied Optics
- Vol. 62 (27) , 7199-7204
SPP excitation and coupling mechanism based on micro/nano fibers
A hot trend in the development of optoelectronic devices is how to use the principle of surface plasmon resonance to enhance the performance of integrated photonics devices and achieve miniaturization. This paper proposes an accompanying waveguide coupling structure of micro/nano fibers, which consists of two parallel-placed micro/nano fibers (MNFs) coated with a silver film in the waist region and infused with a refractive index matching oil. In the overlapping region, there exists a segment of surface plasmon polaritons (SPPs) coupling area. The excitation and coupling characteristics of SPPs are studied through numerical simulation. Optimal coupling enhancement configuration is obtained by studying variables such as spacing distance, coupling length, and metal film thickness. A comparison is made with the SPP intensity of a single MNF, showing a 220% increase in electric field intensity, demonstrating its excellent coupling effect. By using this coupling structure, exploration of SPPs excitation and coupling mechanisms is enhanced, and structures resembling interferometric devices can be designed, providing new insights for high-performance miniaturized devices.
- 13 September 2023
- Published by Optica Publishing Group in Applied Optics
- Vol. 62 (27) , 7199-7204
SPP excitation and coupling mechanism based on micro/nano fibers
A hot trend in the development of optoelectronic devices is how to use the principle of surface plasmon resonance to enhance the performance of integrated photonics devices and achieve miniaturization. This paper proposes an accompanying waveguide coupling structure of micro/nano fibers, which consists of two parallel-placed micro/nano fibers (MNFs) coated with a silver film in the waist region and infused with a refractive index matching oil. In the overlapping region, there exists a segment of surface plasmon polaritons (SPPs) coupling area. The excitation and coupling characteristics of SPPs are studied through numerical simulation. Optimal coupling enhancement configuration is obtained by studying variables such as spacing distance, coupling length, and metal film thickness. A comparison is made with the SPP intensity of a single MNF, showing a 220% increase in electric field intensity, demonstrating its excellent coupling effect. By using this coupling structure, exploration of SPPs excitation and coupling mechanisms is enhanced, and structures resembling interferometric devices can be designed, providing new insights for high-performance miniaturized devices.
- 8 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (18) , 21301-21307
An MMF–HCF Reflective SPR Sensor for Simultaneous Measurement of Temperature and Relative Humidity
In this paper, a reflective surface plasmon resonance (SPR) sensor based on multimode fiber (MMF)-hollow core fiber (HCF) structure is proposed for simultaneous measurement of temperature and humidity. Along the HCF, two different films, i.e., polyvinyl alcohol (PVA) film and polydimethylsiloxane (PDMS) film are coated on the outer surface to generate two SPR resonances at different wavelengths and achieve the simultaneous measurement function. In order to get a better sensing performance, the length ratio of PVA film and PDMS film, and the PVA coating times are optimized. The experimental results show that the humidity sensitivity of the sensor is 0.6351 nm/% RH in the relative humidity (RH) range of 48-84% RH, and the temperature sensitivity of the sensor is 1.791 nm/°C in the temperature measurement range of 25-80 °C. The sensor has great potential applications in monitoring the environment temperature and humidity changes.
- 8 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (18) , 21301-21307
An MMF–HCF Reflective SPR Sensor for Simultaneous Measurement of Temperature and Relative Humidity
In this paper, a reflective surface plasmon resonance (SPR) sensor based on multimode fiber (MMF)-hollow core fiber (HCF) structure is proposed for simultaneous measurement of temperature and humidity. Along the HCF, two different films, i.e., polyvinyl alcohol (PVA) film and polydimethylsiloxane (PDMS) film are coated on the outer surface to generate two SPR resonances at different wavelengths and achieve the simultaneous measurement function. In order to get a better sensing performance, the length ratio of PVA film and PDMS film, and the PVA coating times are optimized. The experimental results show that the humidity sensitivity of the sensor is 0.6351 nm/% RH in the relative humidity (RH) range of 48-84% RH, and the temperature sensitivity of the sensor is 1.791 nm/°C in the temperature measurement range of 25-80 °C. The sensor has great potential applications in monitoring the environment temperature and humidity changes.