Mohammad Amin Ghannadi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mohammad Amin Ghannadi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Moein Izadi
Department of Geological and Environmental Sciences, Western Michigan University, Kalamazoo, MI, USA
3 shared publications- Moein Izadi
Department of Geological and Environmental Sciences, Western Michigan University, Kalamazoo, MI 49008, USA
3 shared publications Mohammad SaadatSeresht
School of Surveying and Geospatial Engineering College of Engineering University of Tehran North Karegar Tehran Iran
2 shared publications- Mohammad Saadatseresht
School of Surveying and Geospatial Engineering, College of Engineering, University of Tehran, Tehran, Iran
2 shared publications Saeedeh Alebooye
School of Surveying and Geospatial Engineering, College of Engineering, University of Tehran, North Karegar, Tehran, Iran
2 shared publications- Saeedeh Alebooye
University of Tehran, School of Surveying and Geospatial Engineering, College of Engineering, Tehran, Iran
2 shared publications
Latest Publications
- 14 October 2024
- Published by Springer Nature in Journal of the Indian Society of Remote Sensing
- Vol. 53 (3) , 911-922
UAV-Borne Thermal Images Registration Using Optimal Gradient Filter
- 14 October 2024
- Published by Springer Nature in Journal of the Indian Society of Remote Sensing
- Vol. 53 (3) , 911-922
UAV-Borne Thermal Images Registration Using Optimal Gradient Filter
- Open Access
- 14 January 2023
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-4/W1-202, 707-714
EXPLANATORY ANALYSES OF WORK TRIP GENERATION USING MIXED GEOGRAPHICALLY WEIGHTED REGRESSION (MGWR)
In transportation planning, forecasts have commonly followed the sequential four-step model in which, trip generation (production and attraction) plays a critical role. Among the methods applied to model trip generation, regression with Gaussian distribution of errors are recognized as the most prevailing techniques to describe the relationships between production/attraction and explanatory variables by estimating the global, fixed coefficients. Considering that, trip generation is almost impressed by spatial factors which vary over the study area; the main objective of this research is to apply Mixed Geographically Weighted Regression (MGWR) on 253 traffic analysis zones (TAZs) in Mashhad, Iran, by applying travel demand data and relating factors in 2018 to investigate the spatial non-stationarity which are not revealed when global specifications are applied. The influence of certain explanatory variables on response variables may be global, whereas others are local, accordingly, MGWR performs better compared with geographically weighted regression. The results of Moran’s I as spatial autocorrelation index performing on residuals of global, mixed models proved the reliability of the proposed model over the traditional one. The spatial model indicated an improvement in model performance using goodness-of-fit criteria with the coefficient of determination varying from 0.84–0.95 compared with 0.76 and 0.6 in the conventional model. The results of such analysis can provide descriptive and predictive tools at the planning-level for decision-makers.
- 14 January 2023
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-4/W1-202, 707-714
Open AccessEXPLANATORY ANALYSES OF WORK TRIP GENERATION USING MIXED GEOGRAPHICALLY WEIGHTED REGRESSION (MGWR)
In transportation planning, forecasts have commonly followed the sequential four-step model in which, trip generation (production and attraction) plays a critical role. Among the methods applied to model trip generation, regression with Gaussian distribution of errors are recognized as the most prevailing techniques to describe the relationships between production/attraction and explanatory variables by estimating the global, fixed coefficients. Considering that, trip generation is almost impressed by spatial factors which vary over the study area; the main objective of this research is to apply Mixed Geographically Weighted Regression (MGWR) on 253 traffic analysis zones (TAZs) in Mashhad, Iran, by applying travel demand data and relating factors in 2018 to investigate the spatial non-stationarity which are not revealed when global specifications are applied. The influence of certain explanatory variables on response variables may be global, whereas others are local, accordingly, MGWR performs better compared with geographically weighted regression. The results of Moran’s I as spatial autocorrelation index performing on residuals of global, mixed models proved the reliability of the proposed model over the traditional one. The spatial model indicated an improvement in model performance using goodness-of-fit criteria with the coefficient of determination varying from 0.84–0.95 compared with 0.76 and 0.6 in the conventional model. The results of such analysis can provide descriptive and predictive tools at the planning-level for decision-makers.
- Open Access
- 13 January 2023
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-4/W1-202, 209-214
VERTICAL ACCURACY ASSESSMENT OF COPERNICUS DEM (CASE STUDY: TEHRAN AND JAM CITIES)
Digital Elevation Models (DEMs) are widely utilized in a variety of fields, including, hydrology, geomorphology, and geoscience. The dataset is now openly and freely available to the public, with access permissions for data at 30- and 90-meter resolution having been expanded. The Copernicus DEM is a Digital Surface Model (DSM) that depicts the Earth's surface, which includes structures, infrastructure, and vegetation. This DEM is based on the WorldDEM DSM, which has been altered. The Copernicus DEM's vertical accuracy is assessed in this paper. The study area is in Iran, north of Tehran and west of Jam. The Copernicus DEM is compared to the Shuttle Radar Topography Mission (SRTM) in terms of vertical accuracy. The results of the experiments reveal that the Copernicus DEM is more accurate than the SRTM. In the Tehran and Jam examples, the root mean square error (RMSE) for Copernicus DEM (30 m) is 5.72 and 2.19 meters, respectively. Also, this value for SRTM is 6.10 and 3.95 respectively.
- 13 January 2023
- Published by Copernicus GmbH in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. X-4/W1-202, 209-214
Open AccessVERTICAL ACCURACY ASSESSMENT OF COPERNICUS DEM (CASE STUDY: TEHRAN AND JAM CITIES)
Digital Elevation Models (DEMs) are widely utilized in a variety of fields, including, hydrology, geomorphology, and geoscience. The dataset is now openly and freely available to the public, with access permissions for data at 30- and 90-meter resolution having been expanded. The Copernicus DEM is a Digital Surface Model (DSM) that depicts the Earth's surface, which includes structures, infrastructure, and vegetation. This DEM is based on the WorldDEM DSM, which has been altered. The Copernicus DEM's vertical accuracy is assessed in this paper. The study area is in Iran, north of Tehran and west of Jam. The Copernicus DEM is compared to the Shuttle Radar Topography Mission (SRTM) in terms of vertical accuracy. The results of the experiments reveal that the Copernicus DEM is more accurate than the SRTM. In the Tehran and Jam examples, the root mean square error (RMSE) for Copernicus DEM (30 m) is 5.72 and 2.19 meters, respectively. Also, this value for SRTM is 6.10 and 3.95 respectively.
- Open Access
- 22 June 2022
- Published by CMV Verlag in Environmental Sciences
- Vol. 20 (2) , 81-98
Air pollution monitoring using Sentinel-5 (Case study: big industrial cities of Iran)
سابقه و هدف: یکی از اساسی ترین مشکل های امروز دنیا، بحث آلودگی هوا و اثرهای آن بر سلامت انسان است. کشور در حال توسعه ایران هم از این امر جدا نمی باشد. وجود آلاینده هایی همچون دی اکسید نیتروژن، دی اکسید گوگرد، مونوکسید کربن و ذرات معلق (آئروسل ها) افزون بر تأثیرهای مخرب جدی بر سلامتی انسان، سبب آسیب به پوشش گیاهی و بروز تغییرات اقلیمی جهانی می شود، بنابراین لزوم پایش جامع آلاینده ها و به تبع آن اتخاذ تصمیم های صحیح مدیریتی جهت مقابله با این بحران ضروری به نظر می رسد. یکی از ابزارهای قدرتمند در پایش آلودگی هوا، روش های مبتنی بر سنجش از دور می باشد. سنتینل-5 1 آخرین پروژه سازمان فضایی اتحادیه اروپا (با همکاری کشور هلند) می باشد که با استفاده از سنجنده (2TROPOMI) تصاویری در باندهای طیفی متنوع اخذ می کند و ابزاری مناسب جهت پایش بسیاری از آلاینده های هوا محسوب میگردد.مواد و روش ها: در این مطالعه، پایشی جامع براساس مقادیر برخی از مهمترین آلاینده های هوا از جمله دی اکسید نیتروژن، دی اکسید گوگرد، مونوکسید کربن و ذرات معلق، با استفاده از تصویرهای ماهواره سنتینل-5 برای 20 شهر بزرگ و صنعتی ایران در سال 2019 و 2020 صورت گرفته است. در این پژوهش،...
- 22 June 2022
- Published by CMV Verlag in Environmental Sciences
- Vol. 20 (2) , 81-98
Open AccessAir pollution monitoring using Sentinel-5 (Case study: big industrial cities of Iran)
سابقه و هدف: یکی از اساسی ترین مشکل های امروز دنیا، بحث آلودگی هوا و اثرهای آن بر سلامت انسان است. کشور در حال توسعه ایران هم از این امر جدا نمی باشد. وجود آلاینده هایی همچون دی اکسید نیتروژن، دی اکسید گوگرد، مونوکسید کربن و ذرات معلق (آئروسل ها) افزون بر تأثیرهای مخرب جدی بر سلامتی انسان، سبب آسیب به پوشش گیاهی و بروز تغییرات اقلیمی جهانی می شود، بنابراین لزوم پایش جامع آلاینده ها و به تبع آن اتخاذ تصمیم های صحیح مدیریتی جهت مقابله با این بحران ضروری به نظر می رسد. یکی از ابزارهای قدرتمند در پایش آلودگی هوا، روش های مبتنی بر سنجش از دور می باشد. سنتینل-5 1 آخرین پروژه سازمان فضایی اتحادیه اروپا (با همکاری کشور هلند) می باشد که با استفاده از سنجنده (2TROPOMI) تصاویری در باندهای طیفی متنوع اخذ می کند و ابزاری مناسب جهت پایش بسیاری از آلاینده های هوا محسوب میگردد.مواد و روش ها: در این مطالعه، پایشی جامع براساس مقادیر برخی از مهمترین آلاینده های هوا از جمله دی اکسید نیتروژن، دی اکسید گوگرد، مونوکسید کربن و ذرات معلق، با استفاده از تصویرهای ماهواره سنتینل-5 برای 20 شهر بزرگ و صنعتی ایران در سال 2019 و 2020 صورت گرفته است. در این پژوهش،...
- Open Access
- 27 September 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (19) , 3863
A Remote Sensing and Machine Learning-Based Approach to Forecast the Onset of Harmful Algal Bloom
In the last few decades, harmful algal blooms (HABs, also known as “red tides”) have become one of the most detrimental natural phenomena in Florida’s coastal areas. Karenia brevis produces toxins that have harmful effects on humans, fisheries, and ecosystems. In this study, we developed and compared the efficiency of state-of-the-art machine learning models (e.g., XGBoost, Random Forest, and Support Vector Machine) in predicting the occurrence of HABs. In the proposed models the K. brevis abundance is used as the target, and 10 level-02 ocean color products extracted from daily archival MODIS satellite data are used as controlling factors. The adopted approach addresses two main shortcomings of earlier models: (1) the paucity of satellite data due to cloudy scenes and (2) the lag time between the period at which a variable reaches its highest correlation with the target and the time the bloom occurs. Eleven spatio-temporal models were generated, each from 3 consecutive day satellite datasets, with a forecasting span from 1 to 11 days. The 3-day models addressed the potential variations in lag time for some of the temporal variables. One or more of the generated 11 models could be used to predict HAB occurrences depending on availability of the cloud-free consecutive days. Findings indicate that XGBoost outperformed the other methods, and the forecasting models of 5–9 days achieved the best results. The most reliable model can forecast eight days ahead of time with balanced overall accuracy, Kappa coefficient, F-Score, and AUC of 96%, 0.93, 0.97, and 0.98 respectively. The euphotic depth, sea surface temperature, and chlorophyll-a are always among the most significant controlling factors. The proposed models could potentially be used to develop an “early warning system” for HABs in southwest Florida.
- 27 September 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (19) , 3863
Open AccessA Remote Sensing and Machine Learning-Based Approach to Forecast the Onset of Harmful Algal Bloom
In the last few decades, harmful algal blooms (HABs, also known as “red tides”) have become one of the most detrimental natural phenomena in Florida’s coastal areas. Karenia brevis produces toxins that have harmful effects on humans, fisheries, and ecosystems. In this study, we developed and compared the efficiency of state-of-the-art machine learning models (e.g., XGBoost, Random Forest, and Support Vector Machine) in predicting the occurrence of HABs. In the proposed models the K. brevis abundance is used as the target, and 10 level-02 ocean color products extracted from daily archival MODIS satellite data are used as controlling factors. The adopted approach addresses two main shortcomings of earlier models: (1) the paucity of satellite data due to cloudy scenes and (2) the lag time between the period at which a variable reaches its highest correlation with the target and the time the bloom occurs. Eleven spatio-temporal models were generated, each from 3 consecutive day satellite datasets, with a forecasting span from 1 to 11 days. The 3-day models addressed the potential variations in lag time for some of the temporal variables. One or more of the generated 11 models could be used to predict HAB occurrences depending on availability of the cloud-free consecutive days. Findings indicate that XGBoost outperformed the other methods, and the forecasting models of 5–9 days achieved the best results. The most reliable model can forecast eight days ahead of time with balanced overall accuracy, Kappa coefficient, F-Score, and AUC of 96%, 0.93, 0.97, and 0.98 respectively. The euphotic depth, sea surface temperature, and chlorophyll-a are always among the most significant controlling factors. The proposed models could potentially be used to develop an “early warning system” for HABs in southwest Florida.
- 8 September 2020
- Published by Taylor & Francis in Geocarto International
- Vol. 37 (8) , 2237-2251
A method for Sentinel-1 DEM outlier removal using 2-D Kalman filter
The generation of a very accurate and precise Digital Elevation Model (DEM) is one of the main objectives of remote sensing applications. Synthetic-Aperture Radar (SAR) interferometry is one of the most common methods for DEM generation. Moreover, one of the most recent Sentinel-1 missions is SAR imagery. Sometimes due to a variety of errors such as interferogram phase error, DEMs based on SAR interferometry contain outliers in the elevation of points. Thus, they need to be modified and updated. In this study, a 2-D Kalman filter-based method is applied to remove outliers from DEM generated from Sentinel-1 images. The proposed method is examined over an area in Iran and the results are compared to a high resolution and precision DEM. The results demonstrate that the efficiency of the proposed method in the outlier removal and Root Mean Square Error (RMSE) of the DEM is improved from 11%—17%.
- 8 September 2020
- Published by Taylor & Francis in Geocarto International
- Vol. 37 (8) , 2237-2251
A method for Sentinel-1 DEM outlier removal using 2-D Kalman filter
The generation of a very accurate and precise Digital Elevation Model (DEM) is one of the main objectives of remote sensing applications. Synthetic-Aperture Radar (SAR) interferometry is one of the most common methods for DEM generation. Moreover, one of the most recent Sentinel-1 missions is SAR imagery. Sometimes due to a variety of errors such as interferogram phase error, DEMs based on SAR interferometry contain outliers in the elevation of points. Thus, they need to be modified and updated. In this study, a 2-D Kalman filter-based method is applied to remove outliers from DEM generated from Sentinel-1 images. The proposed method is examined over an area in Iran and the results are compared to a high resolution and precision DEM. The results demonstrate that the efficiency of the proposed method in the outlier removal and Root Mean Square Error (RMSE) of the DEM is improved from 11%—17%.
- Open Access
- 23 June 2020
- Published by Institution of Engineering and Technology (IET) in IET Radar, Sonar & Navigation
- Vol. 14 (8) , 1229-1235
Optimal texture image reconstruction method for improvement of SAR image matching
Image matching is an important step that is taken in most synthetic aperture radar (SAR) images applications. In this study, a method is proposed for texture image reconstruction to improve SAR image matching. This method consists of three major steps. First, textural features are extracted. Second optimal texture images (OTIs) are created using extracted features. Texture optimisation is conducted using a cat swarm optimisation algorithm. The cost function is the number of correct matched points that are obtained from speeded‐up robust features (SURFs) image matching algorithm. Finally, corresponding points on stereo OTI pairs are matched. Experiments were conducted on spaceborne SAR image pairs consist of RADARSAT‐2, ALOS‐PALSAR, and Sentinel‐1. Results demonstrate that the proposed method has better results in terms of the number of matched points compared to the result of the original SURF and scale‐invariant feature transform methods as two common matching methods.
- 23 June 2020
- Published by Institution of Engineering and Technology (IET) in IET Radar, Sonar & Navigation
- Vol. 14 (8) , 1229-1235
Open AccessOptimal texture image reconstruction method for improvement of SAR image matching
Image matching is an important step that is taken in most synthetic aperture radar (SAR) images applications. In this study, a method is proposed for texture image reconstruction to improve SAR image matching. This method consists of three major steps. First, textural features are extracted. Second optimal texture images (OTIs) are created using extracted features. Texture optimisation is conducted using a cat swarm optimisation algorithm. The cost function is the number of correct matched points that are obtained from speeded‐up robust features (SURFs) image matching algorithm. Finally, corresponding points on stereo OTI pairs are matched. Experiments were conducted on spaceborne SAR image pairs consist of RADARSAT‐2, ALOS‐PALSAR, and Sentinel‐1. Results demonstrate that the proposed method has better results in terms of the number of matched points compared to the result of the original SURF and scale‐invariant feature transform methods as two common matching methods.
- 1 June 2020
- Vol. 4 (1) , 13-25
Effective approach for area-based spaceborne SAR images registration using GLCM textural Features
- 1 June 2020
- Vol. 4 (1) , 13-25
Effective approach for area-based spaceborne SAR images registration using GLCM textural Features
- 29 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 16 (4) , 568-572
A Modified Local Binary Pattern Descriptor for SAR Image Matching
Image matching is an important step which is taken in most applications of synthetic aperture radar (SAR) images. In this letter, a method is proposed for SAR image matching which introduces a modified local binary pattern (LBP) as a descriptor. Multitextural feature LBP (MTF-LBP) uses the gray-level cooccurrence matrix to increase image texture information. MTF-LBP creates bit plane for each point candidate for matching. Then, using hamming distance, true matches are determined. Experiments are conducted on four spaceborne SAR image pairs including Radarsat-2, TerraSAR-X, ALOS-PALSAR, and Sentinel-1. The proposed method is compared with five common LBP approaches. The results indicate that the proposed method has a better performance in terms of the number of true matches.
- 29 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 16 (4) , 568-572
A Modified Local Binary Pattern Descriptor for SAR Image Matching
Image matching is an important step which is taken in most applications of synthetic aperture radar (SAR) images. In this letter, a method is proposed for SAR image matching which introduces a modified local binary pattern (LBP) as a descriptor. Multitextural feature LBP (MTF-LBP) uses the gray-level cooccurrence matrix to increase image texture information. MTF-LBP creates bit plane for each point candidate for matching. Then, using hamming distance, true matches are determined. Experiments are conducted on four spaceborne SAR image pairs including Radarsat-2, TerraSAR-X, ALOS-PALSAR, and Sentinel-1. The proposed method is compared with five common LBP approaches. The results indicate that the proposed method has a better performance in terms of the number of true matches.
- Open Access
- 14 September 2018
- Published by Institution of Engineering and Technology (IET) in IET Radar, Sonar & Navigation
- Vol. 12 (11) , 1307-1312
Efficient method for outlier removal in SAR image matching based on epipolar geometry
A method is proposed for removing falsely matched points after sparse matching in synthetic aperture radar (SAR) images. This method uses epipolar geometry as well as random sample consensus (RANSAC) to automatically remove false matches (outliers) among all points. The method randomly selects at least four points among all matched points. Then, using a bilinear equation, a generic relation is established between the pixel coordinates of a reference point in the master image and the parameters of the corresponding epipolar line in the slave image. Therefore, it is possible to calculate the epipolar line for all points using the bilinear function and then evaluate the accuracy of the matched points. Moreover, the proposed method is compared with the method that uses the RANSAC with an affine function, which is a common method for removing outliers. Here, the output of the scale‐invariant feature transform algorithm is used to conduct the experiments. Furthermore, the SAR image pairs from southern Iran are utilised to evaluate the performance of the method. Experiments are conducted on TerraSAR‐X images, and the results demonstrate that the proposed method has high reliability for removing false matches.
- 14 September 2018
- Published by Institution of Engineering and Technology (IET) in IET Radar, Sonar & Navigation
- Vol. 12 (11) , 1307-1312
Open AccessEfficient method for outlier removal in SAR image matching based on epipolar geometry
A method is proposed for removing falsely matched points after sparse matching in synthetic aperture radar (SAR) images. This method uses epipolar geometry as well as random sample consensus (RANSAC) to automatically remove false matches (outliers) among all points. The method randomly selects at least four points among all matched points. Then, using a bilinear equation, a generic relation is established between the pixel coordinates of a reference point in the master image and the parameters of the corresponding epipolar line in the slave image. Therefore, it is possible to calculate the epipolar line for all points using the bilinear function and then evaluate the accuracy of the matched points. Moreover, the proposed method is compared with the method that uses the RANSAC with an affine function, which is a common method for removing outliers. Here, the output of the scale‐invariant feature transform algorithm is used to conduct the experiments. Furthermore, the SAR image pairs from southern Iran are utilised to evaluate the performance of the method. Experiments are conducted on TerraSAR‐X images, and the results demonstrate that the proposed method has high reliability for removing false matches.