Xiaoping Dong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Xiaoping Dong has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Liying Yang
6 shared publicationsDuolong Jin
5 shared publicationsJiankai Liu
3 shared publicationsQianran Pang
3 shared publicationsShenghai Xin
College of Quality and Technical Supervision of Hebei University, BaoDing, China
3 shared publicationsCuibiao Wang
2 shared publications
Latest Publications
- Open Access
- 1 May 2025
- Published by KEAI Publishing in Materials Reports: Energy
- Vol. 5 (2)
Comparative study on the electrochemical performance of β-manganese dioxide-3D graphene mixtures with (without) carbon nanotubes
- 1 May 2025
- Published by KEAI Publishing in Materials Reports: Energy
- Vol. 5 (2)
Open AccessComparative study on the electrochemical performance of β-manganese dioxide-3D graphene mixtures with (without) carbon nanotubes
- 3 August 2024
- Published by Springer Nature in Ionics
- Vol. 30 (10) , 6047-6059
pH modulation for high capacity and long cycle life of aqueous zinc-ion batteries with β-MnO2/3D graphene-carbon nanotube hybrids as cathode
- 3 August 2024
- Published by Springer Nature in Ionics
- Vol. 30 (10) , 6047-6059
pH modulation for high capacity and long cycle life of aqueous zinc-ion batteries with β-MnO2/3D graphene-carbon nanotube hybrids as cathode
- Open Access
- 1 May 2024
- Published by KEAI Publishing in Journal of Magnesium and Alloys
- Vol. 12 (5) , 2010-2023
Comparative study on the hydrogen storage performance of as-milled MgRENi rapid quenched alloy catalyzed by metal sulfides
- 1 May 2024
- Published by KEAI Publishing in Journal of Magnesium and Alloys
- Vol. 12 (5) , 2010-2023
Open AccessComparative study on the hydrogen storage performance of as-milled MgRENi rapid quenched alloy catalyzed by metal sulfides
- 20 April 2024
- Published by Springer Nature in Ionics
- Vol. 30 (6) , 3329-3338
Effect of MnSO4 concentration on the electrochemical performance of β-MnO2/3D graphene-carbon nanotube hybrids cathode for aqueous zinc-ion batteries
- 20 April 2024
- Published by Springer Nature in Ionics
- Vol. 30 (6) , 3329-3338
Effect of MnSO4 concentration on the electrochemical performance of β-MnO2/3D graphene-carbon nanotube hybrids cathode for aqueous zinc-ion batteries
- 15 September 2023
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 968
β-MnO2/three-dimensional graphene-carbon nanotube hybrids as cathode for aqueous zinc-ion battery
- 15 September 2023
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 968
β-MnO2/three-dimensional graphene-carbon nanotube hybrids as cathode for aqueous zinc-ion battery
- 12 September 2023
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- Vol. 31 (12) , 1-14
Three-dimensional graphene cross-linked carbon nanotube doping as cathode for aqueous zinc ion batteries
- 12 September 2023
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- Vol. 31 (12) , 1-14
Three-dimensional graphene cross-linked carbon nanotube doping as cathode for aqueous zinc ion batteries
- 5 May 2021
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 27 (2) , 140-147
Crystallization Process, Structure and Hydrogen Absorption and Desorption Properties of MgxNi10 (x = 20.5-26.5) Alloys with Hypereutectic Composition
We have analyzed crystallization process of the MgxNi10 (x = 20.5 – 26.5) alloys using phase diagram of Mg-Ni system. Their structure, atomic arrangement and crystal defects were tested by XRD, SEM and HRTEM, respectively. Hydrogenation and dehydrogenation behaviors were measured by pressure-composition-isotherm measurement. The results show that the crystallization processes of the MgxNi10 (x = 20.5 and 22.5) alloys are unlike those of the MgxNi10 (x = 24.5 and 26.5) alloys, but their room temperature microstructure all contain Mg2Ni and eutectic structure of Mg2Ni + α-Mg. The alloys are composed of Mg2Ni phase and α-Mg phase. The addition of Mg is beneficial to the formation of eutectic structure. The alloys have all good activation property. At a lower temperature, such as 200 and 250 °C, the hydrogen absorption rate and hydrogen saturation ratio are significantly lower than those of the alloy at the higher temperatures, such as 300 and 350 °C. At 350 °C, the hydrogen absorption capacity of the alloy increase and the hydrogen release efficiency of the alloy decreases with the increase of Mg content. The time of 90% of the amount of saturated hydrogen absorption and desorption of the alloys is not more than 10 and 2 minutes, respectively. The hydrogen desorption rate of the Mg22.5Ni10 alloy in the four investigated alloys is relatively large and up to 7.170 wt.%.min-1.
- 5 May 2021
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 27 (2) , 140-147
Crystallization Process, Structure and Hydrogen Absorption and Desorption Properties of MgxNi10 (x = 20.5-26.5) Alloys with Hypereutectic Composition
We have analyzed crystallization process of the MgxNi10 (x = 20.5 – 26.5) alloys using phase diagram of Mg-Ni system. Their structure, atomic arrangement and crystal defects were tested by XRD, SEM and HRTEM, respectively. Hydrogenation and dehydrogenation behaviors were measured by pressure-composition-isotherm measurement. The results show that the crystallization processes of the MgxNi10 (x = 20.5 and 22.5) alloys are unlike those of the MgxNi10 (x = 24.5 and 26.5) alloys, but their room temperature microstructure all contain Mg2Ni and eutectic structure of Mg2Ni + α-Mg. The alloys are composed of Mg2Ni phase and α-Mg phase. The addition of Mg is beneficial to the formation of eutectic structure. The alloys have all good activation property. At a lower temperature, such as 200 and 250 °C, the hydrogen absorption rate and hydrogen saturation ratio are significantly lower than those of the alloy at the higher temperatures, such as 300 and 350 °C. At 350 °C, the hydrogen absorption capacity of the alloy increase and the hydrogen release efficiency of the alloy decreases with the increase of Mg content. The time of 90% of the amount of saturated hydrogen absorption and desorption of the alloys is not more than 10 and 2 minutes, respectively. The hydrogen desorption rate of the Mg22.5Ni10 alloy in the four investigated alloys is relatively large and up to 7.170 wt.%.min-1.
- 1 August 2019
- Published by Elsevier in Applied Surface Science
- Vol. 484, 1198-1207
Improved hydrogen storage dynamics of as-milled Mg22(LaY)2Ni10 alloy catalyzed by MoS2
- 1 August 2019
- Published by Elsevier in Applied Surface Science
- Vol. 484, 1198-1207
Improved hydrogen storage dynamics of as-milled Mg22(LaY)2Ni10 alloy catalyzed by MoS2
- 24 February 2007
- Published by Elsevier in Materials Characterization
- Vol. 59 (4) , 390-396
Effects of substituting Mg with Zr on the electrochemical characteristics of Mg2Ni-type electrode alloys prepared by mechanical alloying
- 24 February 2007
- Published by Elsevier in Materials Characterization
- Vol. 59 (4) , 390-396
Effects of substituting Mg with Zr on the electrochemical characteristics of Mg2Ni-type electrode alloys prepared by mechanical alloying
- 5 September 2006
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 32 (5) , 594-599
Effect of boron additive on electrochemical cycling life of La–Mg–Ni alloys prepared by casting and rapid quenching
- 5 September 2006
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 32 (5) , 594-599
Effect of boron additive on electrochemical cycling life of La–Mg–Ni alloys prepared by casting and rapid quenching