YQYu Qiao

Yu Qiao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yu Qiao has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimization Method for Improving Efficiency of Thermal Field Reconstruction in Concrete Dam

    by Yunfei Xiang, Peng Lin, Haoyang Peng, Zichang Li, Yuanguang Liu, Yu Qiao, Zuobin Yang

    In an actual concrete dam construction, the efficiency of thermal field reconstruction directly affects the timeliness of temperature control measures. Therefore, using lightweight methods to obtain real-time, accurate thermal fields is crucial for concrete temperature control. To balance both accuracy and efficiency, this study proposes an optimization method for thermal field reconstruction in concrete dams. The method consists of three components: evaluating interpolation algorithms, optimizing the number of monitoring points, and analyzing their positions. Specifically, a distributed temperature sensing system is employed for concrete monitoring, with a “Z-shaped” optical fiber layout. Three interpolation algorithms—Kriging, Natural Neighbor, and Inverse Distance Weighting—are quantitatively evaluated, with Kriging showing the highest accuracy. Sensitivity analysis, combined with the control variable method, is used to assess the impact of the monitoring point number and position. Lightweight application procedures are then proposed, using reconstructed thermal field results to guide strategy formulation and parameter adjustment for the intelligent cooling control system. A case study demonstrates that this method ensures the effectiveness and timeliness of concrete temperature control measures. The proposed approach enables real-time updates of concrete temperature control measures in sync with the progress of the pouring process, providing a valuable reference for similar projects.


  • Open Access

    Method for Determining the Fracture Parameters of Fully Graded Dam Concrete

    by Xiaofeng Gao, Jiong Wu, Mengxia Zhou, Tao Xu, Chunfeng Liu, Yaosheng Tan, Ning Yang, Yu Qiao

    This paper describes a method for determining the initiation and unstable toughness of fully graded concrete of arbitrary specimen size. The method first predicts the initiation and peak loads of concrete specimens of any size, as well as crack length-to-height ratios based on the fracture test results of concrete specimens with limited sizes or crack length-to-height ratios. Then, combined with the fracture extreme theory, the fracture toughness of concrete with varying size or crack length-to-height ratios is determined. Finally, in order to verify the applicability of the method, it is used to calculate the fracture toughness of small aggregate concrete and fully graded concrete with different sizes or crack length-to-height ratios, and its prediction accuracy is evaluated through indices such as mean absolute percentage error, root mean square error and reliability index a15. The results show that the proposed method can meet the needs of practical engineering applications and can provide theoretical basis for the optimization of the fracture test method of fully graded concrete and the determination of fracture parameters in crack stability or propagation analysis.


  • Open Access

    Prediction Model of Concrete Initial Setting Time Based on Stepwise Regression Analysis

    by Wei-Jia Liu, Xu-Jing Niu, Ning Yang, Yao-Shen Tan, Yu Qiao, Chun-Feng Liu, Kun Wu, Qing-Bin Li, Yu Hu

    Mass concrete is usually poured in layers. To ensure the interlayer bonding quality of concrete, the lower layer should be kept in a plastic state before the upper layer is added. Ultimately, it will lead to the prediction of concrete setting time as a critical task in concrete pouring. In this experiment, the setting time of concrete in laboratory and field environments was investigated. The equivalent age of concrete at the initial setting was also analyzed based on the maturity theory. Meanwhile, factors affecting the setting time in the field environment were studied by means of multiple stepwise regression analysis. Besides, the interlayer splitting tensile strength of concrete subjected to different temperatures and wind speeds was determined. The results of laboratory tests show that both setting time and interlayer splitting tensile strength of concrete decrease significantly with the increase of air temperature and wind speed. In addition, the equivalent age of concrete at initial setting remains the same when subjected to different temperatures, while it decreases obviously with the increase of wind speed. In the field environment, the equivalent age of concrete at initial setting is greatly different, which is related to the variability of relative humidity and wind speed. The average air temperature and maximum wind speed are the main factors affecting the initial setting time of concrete. Furthermore, a prediction model is established based on the stepwise regression analysis results, which can predict the actual setting state in real-time, and hence controlling the interlayer bonding quality of dam concrete.


  • Open Access

    Fracture Properties of Concrete in Dry Environments with Different Curing Temperatures

    by Zhengxiang Mi, Qingbin Li, Yu Hu, Chunfeng Liu, Yu Qiao

    This paper investigated the fracture properties of concrete in dry environments with different curing temperatures (5, 20, 40, and 60 °C). For each curing condition, the key fracture parameters of concrete were tested using wedge splitting specimens at five different ages (3, 7, 14, 28, and 60 d). The results show that in dry environments, the effective fracture toughness and fracture energy of concrete exposed to elevated temperatures increased at a relatively high growth rate at an early age. Nevertheless, the growth speed of effective fracture toughness and fracture energy decreased more quickly at elevated temperatures in the later stages. As a result, the concrete cured at higher temperature exhibited lower ultimate values of fracture parameters, and vice-versa. Namely, a temperature crossover effect was found in the effective fracture toughness and fracture energy of concrete under dry environments. Considering the early growth rate and ultimate values of fracture parameters, the optimum temperature suitable for concrete fracture properties development under dry condition was around 40 °C.


  • Open Access

    Determination of Fracture Properties of Concrete Using Size and Boundary Effect Models

    by Xiaofeng Gao, Chunfeng Liu, Yaosheng Tan, Ning Yang, Yu Qiao, Yu Hu, Qingbin Li, Georg Koval, Cyrille Chazallon

    Tensile strength and fracture toughness are two essential material parameters for the study of concrete fracture. The experimental procedures to measure these two fracture parameters might be complicated due to their dependence on the specimen size or test method. Alternatively, based on the fracture test results only, size and boundary effect models can determine both parameters simultaneously. In this study, different versions of boundary effect models developed by Hu et al. were summarized, and a modified Hu-Guan’s boundary effect model with a more appropriate equivalent crack length definition is proposed. The proposed model can correctly combine the contributions of material strength and linear elastic fracture mechanics on the failure of concrete material with any maximum aggregate size. Another size and boundary model developed based on the local energy concept is also introduced, and its capability to predict the fracture parameters from the fracture test results of wedge-splitting and compact tension specimens is first validated. In addition, the classical Bažant’s Type 2 size effect law is transformed to its boundary effect shape with the same equivalent crack length as Koval-Gao’s size and boundary effect model. This improvement could extend the applicability of the model to infer the material parameters from the test results of different types of specimens, including the geometrically similar specimens with constant crack-length-to-height ratios and specimens with different initial crack-length-to-height ratios. The test results of different types of specimens are adopted to verify the applicability of different size and boundary effect models for the determination of fracture toughness and tensile strength of concrete material. The quality of the extrapolated fracture parameters of the different models are compared and discussed in detail, and the corresponding recommendations for predicting the fracture parameters for dam concrete are proposed.