CSChandani Singh

Chandani Singh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chandani Singh has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Unlocking long-term stability in metal-based gas diffusion electrodes for CO 2 electroreduction

    by Chandani Singh, Jason Song, Ranjith Prasannachandran, Asier Grijalvo, Jing Shen, Zhiyuan Chen, Jan Vaes, Yuvraj Y. Birdja, Deepak Pant

    Electrochemical CO 2 reduction (ECR) to formate/formic acid (FA) represents one of the most viable pathways for converting CO 2 into value-added chemicals, particularly under industrially relevant conditions.


  • Palladium Nanocluster Modification of Mesoporous Copper Oxide Shifts Its Selectivity to C 2+ Products in CO 2 Electrochemical Reduction

    by Thi Hong Trang Nguyen, Jing Shen, Chandani Singh, Dimitra Papamichail, Vana Chinnappa Chinnabathini, Alessia Bardazzi, Deepak Pant, Didier Grandjean, Ewald Janssens

    Novel electrodes composed of mesoporous copper oxide inverse opals ( m Cu x O), surface‐modified with controlled amounts of well‐defined Pd nanoclusters, have been evaluated for their selective electroreduction of CO 2 to C 2+ products. While m Cu x O synthesized via colloidal templating produces mostly C 1 products, the introduction of one or two atomic monolayer equivalents of Pd nanoclusters via cluster beam deposition induces a pronounced selectivity shift toward ethylene and ethanol. Following Pd deposition, the C 2+ faradaic efficiency of Pd‐modified m Cu x O increases nearly sixfold compared to bare m Cu x O at a current density of 100 mA cm −2 . A combination of ex situ X‐ray diffraction, X‐ray Photoelectron Spectroscopy, Extended X‐ray absorption fine structure, High‐energy‐resolution fluorescence‐detected X‐ray absorption near edge structure, and in situ Raman spectroscopy reveals that at these low Pd loadings, the nanoclusters promote the complete reduction at −0.7 V RHE (versus the reversible hydrogen electrode) of m Cu x O into small Cu metal crystallites that are likely important for the significant C 2+ selectivity enhancement. In situ Raman indicates that once the m Cu x O is reduced, a small amount of Pd nanoclusters promotes the increase in surface‐bound *CO and *CH x specieson. In contrast, higher Pd nanocluster loadings only yield a partial reduction of m Cu x O, even at −1.0 V RHE , accompanied by a decrease in C 2+ selectivity.


  • Open Access

    Scaling up electrochemical CO 2 reduction to formate through comparative reactor analysis

    by Paniz Izadi, Swapnil Varhade, Carl Schneider, Philip Haus, Chandani Singh, Avni Guruji, Deepak Pant, Falk Harnisch

    Electrochemical CO 2 reduction to formate using Sn and Bi catalysts was stepwise scaled up and evaluated, enabling the identification of optimal configurations and performance metrics for potential industrial deployment.


  • Open Access

    Electrochemical CO2 Reduction: Commercial Innovations and Prospects

    by Swapnil Varhade, Avni Guruji, Chandani Singh, Giancarlo Cicero, Max García‐Melchor, Joost Helsen, Deepak Pant

    Sustainability is an imperative requirement in this era, with electrocatalytic power into fuels technologies emerging as a significant route toward sustainable chemistry. One of the focus areas within the chemical industry is capture of carbon dioxide (CO2) and its electrochemical reduction (eCO2RR) into economically viable commodities through the utilization of renewable sources. Despite some specific eCO2RR technologies being poised for market introduction, the development of a comprehensive technology for eCO2RR remains a challenge. While certain technologies targeting specific eCO2RR products are on the verge of deployment, substantial efforts are still necessary to transition and establish presence in the market over conventional technologies. This review highlights recent technological advancements, fundamental studies, and the persisting challenges from an industrial perspective. We take a deep dive into the research methodologies, strategies, challenges, and advancements in the development of applications for eCO2RR. Specifically, three eCO2RR products – CO, HCOOH, and C2H4 – as promising candidates for implementation are elaborated based on techno‐economic considerations. Additionally, the review discusses the industrial blueprint for these products, aiming to streamline their path toward commercialization. The intent is to present the status of eCO2RR, offering insights into its potential transformation from a mere laboratory curiosity to a feasible technology for industrial chemical synthesis.


  • Open Access

    Assessing the Electrochemical CO2 Reduction Reaction Performance Requires More Than Reporting Coulombic Efficiency

    by Paniz Izadi, Jia Song, Chandani Singh, Deepak Pant, Falk Harnisch

    Reporting coulombic efficiency () is the common way to assess the performance of electrochemical carbon dioxide (CO2) reduction reaction (eCO2RR) in literature, whereas its carbon conversion efficiency () is frequently neglected. Herein, the importance of reporting both efficiencies when evaluating the eCO2RR is discussed, using Sn‐based gas diffusion electrodes (GDEs) as model electrodes. It is shown that can vary remarkably at a constant with minor operational changes. Over 120 min experiments with operational conditions being representative of numerous previous studies, the is increased from ≈20% to 41% (being only 9% below the theoretical maximum). This was achieved by simply adjusting the inlet CO2 flow rate from ≈35 to 16 mL min−1, while was identical at both CO2 flow rates (≈85%, 7%, and 4% for production of formate/formic acid, CO, and H2, respectively at both conditions). Thus, it is advocated that reporting of both efficiencies, for electrons and carbon, is required for meaningfully assessing the performance of an eCO2RR system.


  • Devising a Polyoxometalate-Based Functional Material as an Efficient Electrocatalyst for the Hydrogen Evolution Reaction

    by Chandani Singh, Atanu Haldar, Olivia Basu, Samar K. Das

    Hydrogen is the solution to all the problems associated with the energy crisis. Generating hydrogen from water splitting is one of the greener approaches, but it requires an efficient catalyst that is economical for the bulk production of hydrogen. The transition metal-aqua coordination complexes, which are otherwise inactive/unstable for electrochemical hydrogen evolution reaction (HER) activity, can efficiently be utilized for the same by attaching these metal-aqua species on a stable support. With a similar approach, we have synthesized and structurally characterized a two-dimensional polyoxometalate (POM)-copper complex hybrid that supports a copper(II)-aqua-bypyridine complex with a molecular formula of the overall system, [{CuII(2,2′-bpy)(H2O)2}][{CoIIWVI12O40}{CuII(2,2′-bpy)(H2O)}{CuII(2,2′-bpy)}]·2H2O (1). The bis(aqua)-mono(bipyridine) Cu(II)-complex fragment {CuII(2,2′-bpy)(H2O)2}2+, attached to the two-dimensional POM-Cu-complex support, acts as an active catalytic center that catalyzes the electrochemical HER. The electrochemical studies done for this work enabled us to understand the role of compound 1 as an electrocatalyst for the HER in near-neutral medium (pH 4.8), under buffered conditions (acetate buffer). Through detailed electrochemical experiments including controlled ones, we understand that compound 1 follows a proton-coupled electron transfer (PCET) pathway with one proton and one electron involvement in the HER. The overpotential required to achieve a current density of 1 mA/cm2 is found to be 520 mV with a Faradaic efficiency of 81%.


  • Efficient photocatalytic synthesis of l-glutamate using a self-assembled carbon nitride/sulfur/porphyrin catalyst

    by Surabhi Chaubey, Chandani Singh, Pooja Singh, Abhishek Kumar, P. P. Pande, Jin-Ook Baeg, D. K. Dwivedi, Rajesh K. Yadav


  • Designing UiO-66-Based Superprotonic Conductor with the Highest Metal–Organic Framework Based Proton Conductivity

    by Subhabrata Mukhopadhyay, Joyashish Debgupta, Chandani Singh, Rudraditya Sarkar, Olivia Basu, Samar Kumar Das

    MOF based proton conductors have received immense importance recently. The present study endeavors to design two post-synthetically modified UiO-66 based MOFs and study the effects of their structural differences on their proton conductivity. UiO-66-NH2 is modified by reaction with sultones to prepare two homologous compounds i.e., PSM 1 and PSM 2, which have SO3H groups in comparable extent (Zr:S ≈ 2: 1) in both. But the pendant alkyl chain holding the –SO3H group is of different length. PSM 2 has longer alkyl chain attachment than that of PSM 1. This difference in length of side arm results in huge difference in proton conducting behavior of the two compounds. PSM 1 is observed to have highest MOF based proton conductivity (1.64 × 10-1 Scm-1) at 80 °C, which is comparable to commercially available Nafion while PSM 2 shows significantly lower conductivity ((4.6 × 10-3 Scm-1). Again, the activation energy for proton conductivity is one of the lowest among all MOF based proton conductors in case of PSM 1 while, PSM 2 requires larger activation energy (almost three times).This profound effect of variation of chain length of side arm by 1 carbon atom in case of PSM 1 and PSM 2 was rather surprising and never documented before. This effect of length of side arm can be very useful to understand proton conduction mechanism of MOF based compounds and also to design better proton conductors. Besides, PSM 1 showed proton conductivity as high as 1.64 × 10-1 Scm-1 at 80 °C temperature, which is the highest reported value till date among all MOF based systems. The lability of the ‒SO3H proton of the post synthetically modified UiO-66 MOFs has theoretically been determined by molecular electrostatic potential (MEP) analysis and theoretical pKa calculation of models of functional sites along with relevant NBO analyses.


  • Polyoxometalate-Supported Bis(2,2′-bipyridine)mono(aqua)nickel(II) Coordination Complex: an Efficient Electrocatalyst for Water Oxidation

    by Chandani Singh, Subhabrata Mukhopadhyay, Samar K. Das

    A polyoxometalate (POM)-supported nickel(II) coordination complex, [NiII(2,2′-bpy)3]3[{NiII(2,2′-bpy)2(H2O)}{HCoIIWVI12O40}]2·3H2O (1; 2,2′-bpy = 2,2′-bipyridine), has been synthesized and structurally characterized. We could obtain a relatively better resolved structure from dried crystals of 1, NiII(2,2′-bpy)3]3[{NiII(2,2′-bpy)2(H2O)}{HCoIIWVI12O40}]2·H2O (D1). Because the title compound has been characterized with a {NiII(2,2′-bpy)2(H2O)}2+ fragment coordinated to the surface of the Keggin anion ([H(CoIIW12O40]5–) via a terminal oxo group of tungsten and the [NiII(2,2′-bpy)3]2+ coordination complex cation sitting as the lattice component in the concerned crystals, the electronic spectroscopy of compound 1 has been described by comparing its electronic spectral features with those of [NiII(2,2′-bpy)2(H2O)Cl]Cl, [NiII(2,2′-bpy)3]Cl2, and K6[CoIIW12O40]·6H2O. Most importantly, compound 1 can function as a heterogeneous and robust electrochemical water oxidation catalyst (WOC). To gain insights into the water oxidation (WO) protocol and to interpret the nature of the active catalyst, diverse electrochemical experiments have been conducted. The mode of action of the WOC during the electrochemical process is accounted for by confirmation that there was no formation/participation of metal oxide during various controlled experiments. It is found that the title compound acts as a true catalyst that has NiII (coordinated to POM surface) acting as the active catalytic center. It is also found to follow a proton-coupled electron-transfer pathway (two electrons and one proton) for WO catalysis with a high turnover frequency of 18.49 (mol of O2)(mol of NiII)−1 s–1.