Yang Wang

Claystone is actually a type of hard soil or soft rock. To reveal the engineering geological characteristics of the Xigeda formation claystone in Luding County (Western Sichuan, China), some experiments, including X-ray diffraction (XRD), scanning electron microscopy (SEM), and geotechnical tests, are performed. The testing results indicate that the Xigeda formation claystone primarily consists of silt, clay, and other fine-grained materials. It is characterized by interbedded yellow and gray thin layers with a horizontal lamination structure. The yellow and gray claystones are made of the same materials but differ in their proportions. Additionally, yellow claystone is characterized by a higher density, resulting in enhanced cementation among clay particles. The permeability coefficient of Xigeda formation claystones ranges from 3.62 × 10⁻⁴~7.34 × 10⁻⁴ cm/s. The cohesion of yellow and gray claystones decreases with increasing moisture content, and the decline is greater at higher moisture contents. However, the relationship between internal friction angle and moisture content is different. The mechanical properties of the Xigeda formation exhibit significant differences in sensitivity to changes in moisture content across various regions. Notably, the claystone within the study region experiences a particularly pronounced weakening of its mechanical properties when exposed to water.

Herein, a finite discrete element method was used to simulate the rockburst phenomenon of elliptical caverns with different axis ratios. Two situations were employed, namely when the disturbance direction is perpendicular and parallel to the ellipse. Based on the peak stress, maximum velocity, stress nephogram, and image fractal characteristics, the influence of axis ratio and direction of the disturbance on rockburst were analyzed. The results show that the samples with different axis ratios experienced the same process of quiet period, slab cracking period, and rockburst. The rockburst pit had V shape, and the failure modes of rockburst primarily included shear cracks, horizontal tension cracks, and vertical tension cracks. With the rise in axis ratio, the peak stress and maximum speed increased. Furthermore, the pressure area on the left and right sides of the sample cavern decreased when the disturbance direction was parallel to the short axis of the ellipse, while it increased for the sample with a disturbance direction perpendicular to the short axis. The fractal dimension value of the crack was gradually amplified with disturbance. The fractal dimension value of the sample whose disturbance direction was perpendicular to the minor axis of the ellipse was lower, and it was more difficult to damage.

Rockburst disaster is one of the prominent problems faced by deep underground engineering. In this study, rockburst in four elliptical holes with different axial ratios in sandstone under biaxial loading is studied as an analogue for underground roadways. Video and acoustic emission (AE) equipment is used to monitor the biaxial loading tests. Experimental results indicate that each of the elliptical holes goes through four stages: quiet period, small particle ejection, spalling, and rockburst. The duration of quiet and spalling periods increased with increasing axial ratio of ellipse. The duration of the ejection and rockburst periods remains unchanged. All the four elliptical holes have V-shaped pits after rockburst occurs. The fragments produced during rockburst are divided into coarse, medium, fine, and micro grains. The quantity of coarse and medium grains increases with increasing axial ratio. The mass ratio of coarse and medium grains increases and that of fine and micro grains decreases. The depth, angle, and area of the V-shaped pits decrease with increasing axis ratio. Tensile cracks play an important role in rockburst failure. Tensile cracks are the dominant crack types formed during rockburst and account for over 70% of all cracks in the samples. The number of tensile cracks increased and the number of shear cracks decreased. This paper has some reference value for practical engineering design and prevention of rockburst.