Boris Vladimirovich Sobol
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Boris Vladimirovich Sobol has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Arcady Nicolaevich Soloviev
Don State Technical University
8 shared publications - Pavel Vladimirovich Vasiliev
Don State Technical University
5 shared publications - Aleksandr Krasnoshchyokov
Don State Technical University
4 shared publications - Elena Victorovna Rashidova
Don State Technical University, Rostov-on-Don, Russian Federation
4 shared publications A. N. Solov’EV
Don State Technical University
3 shared publicationsB.I. Smetanin
3 shared publications
Latest Publications
- 22 June 2026
- Published by FSFEI HE Don State Technical University in Modern Trends in Construction, Urban and Territorial Planning
- Vol. 5 (2)
A Combined Finite Element Analysis and Artificial Neural Network Approach for Diagnostics of Building Cross-Sections Weakened with Stress Concentrators
Introduction . The study is dedicated to developing a new method for identifying defects in building structures with stress concentrators. The method is based on the integration of shadow ultrasonic testing with deep learning algorithms, which would enable accurate diagnosis with reliably identifying the geometric characteristics of defects. Materials and Methods . A finite element model of an area with an angular point and damping layers made of metal with a flexible coating was used. An ultrasonic actuator and receiver were placed on the opposite edges. Numerical experiments with changes in the geometry and materials of the area and defect parameters were conducted on a distributed computing system. The resulting signals were converted into spectrograms which were used in order to train a convolutional neural network that establishes a connection between the spectrogram and the defect parameters. Results . An extensive dataset of spectrograms has been formed. The trained neural network has displayed the ability to accurately identify the key defect parameters based on a spectrogram such as size, position, and orientation. Verification of the method has shown that it outperforms the traditional methods of ultrasonic signal analysis in terms of its accuracy and speed. Discussion and Conclusion . The hybrid approach for non-destructive testing in complex geometric conditions has been proven to be effective. The major advantage is automated and intelligent data analysis reducing a degree of subjectivity. The practical significance is the creation of a prototype adaptive diagnostic system. Prospects are related to further training on experimental data and integration into portable systems for monitoring structures.
- 22 June 2026
- Published by FSFEI HE Don State Technical University in Modern Trends in Construction, Urban and Territorial Planning
- Vol. 5 (2)
A Combined Finite Element Analysis and Artificial Neural Network Approach for Diagnostics of Building Cross-Sections Weakened with Stress Concentrators
Introduction . The study is dedicated to developing a new method for identifying defects in building structures with stress concentrators. The method is based on the integration of shadow ultrasonic testing with deep learning algorithms, which would enable accurate diagnosis with reliably identifying the geometric characteristics of defects. Materials and Methods . A finite element model of an area with an angular point and damping layers made of metal with a flexible coating was used. An ultrasonic actuator and receiver were placed on the opposite edges. Numerical experiments with changes in the geometry and materials of the area and defect parameters were conducted on a distributed computing system. The resulting signals were converted into spectrograms which were used in order to train a convolutional neural network that establishes a connection between the spectrogram and the defect parameters. Results . An extensive dataset of spectrograms has been formed. The trained neural network has displayed the ability to accurately identify the key defect parameters based on a spectrogram such as size, position, and orientation. Verification of the method has shown that it outperforms the traditional methods of ultrasonic signal analysis in terms of its accuracy and speed. Discussion and Conclusion . The hybrid approach for non-destructive testing in complex geometric conditions has been proven to be effective. The major advantage is automated and intelligent data analysis reducing a degree of subjectivity. The practical significance is the creation of a prototype adaptive diagnostic system. Prospects are related to further training on experimental data and integration into portable systems for monitoring structures.
- Open Access
- 15 December 2025
- Published by PNRPU Publishing House in PNRPU Mechanics Bulletin
- No. 2,p. 100-110
Equilibrium State of a Straight-Line Internal Crack Near the Corner Point of an Elastic Region Reinforced along the Contour
The problem of plane deformation of an elastic isotropic wedge-shaped region weakened by an internal defect in the form of a crack is considered. The boundaries of the investigated region are supported by a thin flexible coating. The boundary conditions determining the influence of the coating are modeled by special relations based on the asymptotic analysis of the problem solution for the strip. The adequacy of the mathematical model of the coating is verified by a series of numerical experiments in the authors' previous studies. The problem solution was carried out by the method of integral transformations. The Mellin transformation allowed reducing the problem to a system of ordinary differential equations of the second order. Its general solution is constructed. To determine the unknown coefficients in the found general solution, a system of linear algebraic equations is obtained. The conjugation condition on the crack location line allowed us to obtain a singular integral equation with a Cauchy kernel, which is characteristic of the problems of stress concentration at the crack ends in the plane formulation. Its numerical solution was carried out, providing the possibility of calculating the values of the normal stress intensity factors at the crack ends. The concept of the indicator of the coating restraining effect is introduced, its behavior for coatings with different parameters is studied, the influence of physical and mechanical characteristics of the coating. We investigated its thickness and stiffness, as well as the crack size, its location relative to the corner point of the area, the angle of opening of the wedge-shaped area on the crack opening. The assessment of how the coatings influence the stress-strain state of sections of products weakened by stress concentration zones contributes to the development of new design approaches to the structural component of products, allowing us to enhance the strength and wear resistance of machine parts and elements of building structures.
- 15 December 2025
- Published by PNRPU Publishing House in PNRPU Mechanics Bulletin
- No. 2,p. 100-110
Open AccessEquilibrium State of a Straight-Line Internal Crack Near the Corner Point of an Elastic Region Reinforced along the Contour
The problem of plane deformation of an elastic isotropic wedge-shaped region weakened by an internal defect in the form of a crack is considered. The boundaries of the investigated region are supported by a thin flexible coating. The boundary conditions determining the influence of the coating are modeled by special relations based on the asymptotic analysis of the problem solution for the strip. The adequacy of the mathematical model of the coating is verified by a series of numerical experiments in the authors' previous studies. The problem solution was carried out by the method of integral transformations. The Mellin transformation allowed reducing the problem to a system of ordinary differential equations of the second order. Its general solution is constructed. To determine the unknown coefficients in the found general solution, a system of linear algebraic equations is obtained. The conjugation condition on the crack location line allowed us to obtain a singular integral equation with a Cauchy kernel, which is characteristic of the problems of stress concentration at the crack ends in the plane formulation. Its numerical solution was carried out, providing the possibility of calculating the values of the normal stress intensity factors at the crack ends. The concept of the indicator of the coating restraining effect is introduced, its behavior for coatings with different parameters is studied, the influence of physical and mechanical characteristics of the coating. We investigated its thickness and stiffness, as well as the crack size, its location relative to the corner point of the area, the angle of opening of the wedge-shaped area on the crack opening. The assessment of how the coatings influence the stress-strain state of sections of products weakened by stress concentration zones contributes to the development of new design approaches to the structural component of products, allowing us to enhance the strength and wear resistance of machine parts and elements of building structures.
- Open Access
- 15 December 2024
- Published by PNRPU Publishing House in PNRPU Mechanics Bulletin
- No. 4,p. 36-43
Contact Problems of an Inclusion in a Plane Elastic Wedge
Plane contact problems are considered for an isotropic homogeneous elastic wedge with a thin rigid inclusion of a finite length located on its bisector. The outer faces of the wedge are subject to rigid or sliding fixation. The problems are symmetric with respect to the bisector of the wedge. The inclusion is completely coupled with the elastic medium in the contact region. A tangential force is applied to the inclusion, under the action of which it is displaced along the bisector by a given value. Using the Mellin integral transform, the contact problems are reduced to integral equations with respect to tangential contact stresses, from which the integral equations of the corresponding problems for an elastic strip can be obtained by limiting passages. Special cases also include problems with one or two inclusions in an elastic plane. The main dimensionless geometric parameter is introduced, which characterizes the relative distance of the inclusion from the wedge apex. Three methods are used to solve the integral equations. The first method consists of obtaining a closed solution based on a special approximation of the kernel symbol. The second method, regular asymptotic, involves expansion of the solution in powers of a small parameter and is effective for inclusions relatively distant from the wedge apex. The third method, singular asymptotic, involves expansion of the solution into several parts and solution of the Wiener-Hopf integral equations. A degenerate solution and a superposition of boundary layer solutions are taken. This method works for inclusions located relatively close to the wedge apex. Using the three methods, a numerical analysis is performed for different types of boundary conditions, values of the wedge angle, Poisson's ratio, and the main dimensionless parameter.
- 15 December 2024
- Published by PNRPU Publishing House in PNRPU Mechanics Bulletin
- No. 4,p. 36-43
Open AccessContact Problems of an Inclusion in a Plane Elastic Wedge
Plane contact problems are considered for an isotropic homogeneous elastic wedge with a thin rigid inclusion of a finite length located on its bisector. The outer faces of the wedge are subject to rigid or sliding fixation. The problems are symmetric with respect to the bisector of the wedge. The inclusion is completely coupled with the elastic medium in the contact region. A tangential force is applied to the inclusion, under the action of which it is displaced along the bisector by a given value. Using the Mellin integral transform, the contact problems are reduced to integral equations with respect to tangential contact stresses, from which the integral equations of the corresponding problems for an elastic strip can be obtained by limiting passages. Special cases also include problems with one or two inclusions in an elastic plane. The main dimensionless geometric parameter is introduced, which characterizes the relative distance of the inclusion from the wedge apex. Three methods are used to solve the integral equations. The first method consists of obtaining a closed solution based on a special approximation of the kernel symbol. The second method, regular asymptotic, involves expansion of the solution in powers of a small parameter and is effective for inclusions relatively distant from the wedge apex. The third method, singular asymptotic, involves expansion of the solution into several parts and solution of the Wiener-Hopf integral equations. A degenerate solution and a superposition of boundary layer solutions are taken. This method works for inclusions located relatively close to the wedge apex. Using the three methods, a numerical analysis is performed for different types of boundary conditions, values of the wedge angle, Poisson's ratio, and the main dimensionless parameter.
- Open Access
- 27 December 2023
- Published by FSFEI HE Don State Technical University in Advanced Engineering Research (Rostov-on-Don)
- Vol. 23 (4) , 433-450
Modeling of Ultrasonic Flaw Detection Processes in the Task of Searching and Visualizing Internal Defects in Assemblies and Structures
Introduction. Inverse problems are a specific type of tasks where the consequences of phenomena are studied to identify their causes. They are widely used in scientific studies, specifically, those dealing with large amounts of experimental data. In the presented paper, inverse problems in mechanical engineering and structural diagnostics are considered. These areas require precise methods to identify internal defects in various materials, which can be critical to ensure the safety and efficiency of technical structures. Despite the many flaw detection methods available, there is a need for innovative developments that can provide higher accuracy and efficiency. This study integrates different scientific methods and technologies. It opens up new perspectives in nondestructive testing for the detection of internal defects in various materials and structures. Its objective is to develop and implement nondestructive testing methods based on a neural network device to improve the accuracy of defect identification, as well as to build a neural network model and evaluate its effectiveness for the refinement of ultrasonic visualization of internal defects in solid materials. In this regard, the task to be solved is to create a reliable tool for accurate visualization of sizes, shapes, location and orientation of internal defects in various materials.Materials and Methods. The technique of determining the geometric parameters of defects in materials through nondestructive testing is used. The approach combining modeling of ultrasonic wave propagation in acoustic medium and artificial neural network technologies is applied. This approach identifies nonlinear relationships between the geometry of defects and the amplitude-frequency and amplitude-time data obtained during signal analysis. Artificial neural networks are a model that can be trained on examples, which provides for an effective solution to problems that are difficult to express in traditional forms. The study uses the finite difference method in the time domain. It is applied to identify and visualize internal defects in materials using ultrasonic nondestructive testing and convolutional generative neural networks.Results. A convolutional neural network has been developed to visualize internal defects using ultrasonic nondestructive testing techniques. This neural network successfully determines the size of defects, their location, shape and orientation with high accuracy and reliability.Discussion and Conclusion. The authors highlight the key influence of defect size on the accuracy of ultrasonic imaging in various scenarios. The validation of the model for three different cases of defects with different mechanical parameters has shown that for successful visualization of defects, the wavelength of the ultrasonic pulse must be ten times smaller than the size of the defect. When analyzing the impact of defect size on the accuracy of the neural network, it is found that the visualization error increases for defects of smaller size. It has also been found that the relative speed of sound in materials has a greater effect on the accuracy of the method than the relative density of the material. Based on the results obtained by the authors, it can be argued that the developed methods and technical solutions are of great importance for future research in the field of flaw detection. They have significant potential for scientific and practical applications.
- 27 December 2023
- Published by FSFEI HE Don State Technical University in Advanced Engineering Research (Rostov-on-Don)
- Vol. 23 (4) , 433-450
Open AccessModeling of Ultrasonic Flaw Detection Processes in the Task of Searching and Visualizing Internal Defects in Assemblies and Structures
Introduction. Inverse problems are a specific type of tasks where the consequences of phenomena are studied to identify their causes. They are widely used in scientific studies, specifically, those dealing with large amounts of experimental data. In the presented paper, inverse problems in mechanical engineering and structural diagnostics are considered. These areas require precise methods to identify internal defects in various materials, which can be critical to ensure the safety and efficiency of technical structures. Despite the many flaw detection methods available, there is a need for innovative developments that can provide higher accuracy and efficiency. This study integrates different scientific methods and technologies. It opens up new perspectives in nondestructive testing for the detection of internal defects in various materials and structures. Its objective is to develop and implement nondestructive testing methods based on a neural network device to improve the accuracy of defect identification, as well as to build a neural network model and evaluate its effectiveness for the refinement of ultrasonic visualization of internal defects in solid materials. In this regard, the task to be solved is to create a reliable tool for accurate visualization of sizes, shapes, location and orientation of internal defects in various materials.Materials and Methods. The technique of determining the geometric parameters of defects in materials through nondestructive testing is used. The approach combining modeling of ultrasonic wave propagation in acoustic medium and artificial neural network technologies is applied. This approach identifies nonlinear relationships between the geometry of defects and the amplitude-frequency and amplitude-time data obtained during signal analysis. Artificial neural networks are a model that can be trained on examples, which provides for an effective solution to problems that are difficult to express in traditional forms. The study uses the finite difference method in the time domain. It is applied to identify and visualize internal defects in materials using ultrasonic nondestructive testing and convolutional generative neural networks.Results. A convolutional neural network has been developed to visualize internal defects using ultrasonic nondestructive testing techniques. This neural network successfully determines the size of defects, their location, shape and orientation with high accuracy and reliability.Discussion and Conclusion. The authors highlight the key influence of defect size on the accuracy of ultrasonic imaging in various scenarios. The validation of the model for three different cases of defects with different mechanical parameters has shown that for successful visualization of defects, the wavelength of the ultrasonic pulse must be ten times smaller than the size of the defect. When analyzing the impact of defect size on the accuracy of the neural network, it is found that the visualization error increases for defects of smaller size. It has also been found that the relative speed of sound in materials has a greater effect on the accuracy of the method than the relative density of the material. Based on the results obtained by the authors, it can be argued that the developed methods and technical solutions are of great importance for future research in the field of flaw detection. They have significant potential for scientific and practical applications.
- Open Access
- 15 December 2023
- Published by PNRPU Publishing House in PNRPU Mechanics Bulletin
- No. 1,p. 111-124
IDENTIFICATION OF DEFECTS IN A COATING WEDGE BASED ON ULTRASONIC NON-DESTRUCTIVE TESTING METHODS AND CONVOLUTIONAL NEURAL NETWORKS
The paper deals with the identification of a crack-like defect in a coated wedge based on ultrasonic nondestructive testing. The authors propose an approach of defect identification followed by determination of its geometrical parameters. The approach is based on a shadowed ultrasonic nondestructive testing method combined with deep machine learning technologies. A wedge-shaped area is inspected for the presence of an internal defect. On one edge of the wedge there is a source of ultrasonic vibrations, on the opposite edge there is a receiver. Passing through the coating and body of the wedge, part of the signal is reflected from inhomogeneities and defects that may be present in it. The signal reaching the opposite edge of the wedge is read by the receiver. The received data is processed by a neural network model, which predicts the presence or absence of an internal defect and, if present, determines geometric parameters such as size and position. A finite element model of ultrasonic wave propagation inside the wedge is constructed. Special damping layers are used, due to which the influence of parasitic signal reflections and its further propagation into the wedge body is significantly reduced. Based on the built model, the shadow method of ultrasonic scanning is implemented. This method implies that on one side of the wedge are installed excitation devices, and on the opposite side – receiving devices. Several numerical experiments for various combinations of geometric parameters of the wedge and the defect have been performed using a distributed computing system. Based on the obtained data, a neural network model was built and trained, capable of identifying the defect and determining its characteristics. The input of the model is spectrograms of the readout signal, and the output is values characterizing the defect.
- 15 December 2023
- Published by PNRPU Publishing House in PNRPU Mechanics Bulletin
- No. 1,p. 111-124
Open AccessIDENTIFICATION OF DEFECTS IN A COATING WEDGE BASED ON ULTRASONIC NON-DESTRUCTIVE TESTING METHODS AND CONVOLUTIONAL NEURAL NETWORKS
The paper deals with the identification of a crack-like defect in a coated wedge based on ultrasonic nondestructive testing. The authors propose an approach of defect identification followed by determination of its geometrical parameters. The approach is based on a shadowed ultrasonic nondestructive testing method combined with deep machine learning technologies. A wedge-shaped area is inspected for the presence of an internal defect. On one edge of the wedge there is a source of ultrasonic vibrations, on the opposite edge there is a receiver. Passing through the coating and body of the wedge, part of the signal is reflected from inhomogeneities and defects that may be present in it. The signal reaching the opposite edge of the wedge is read by the receiver. The received data is processed by a neural network model, which predicts the presence or absence of an internal defect and, if present, determines geometric parameters such as size and position. A finite element model of ultrasonic wave propagation inside the wedge is constructed. Special damping layers are used, due to which the influence of parasitic signal reflections and its further propagation into the wedge body is significantly reduced. Based on the built model, the shadow method of ultrasonic scanning is implemented. This method implies that on one side of the wedge are installed excitation devices, and on the opposite side – receiving devices. Several numerical experiments for various combinations of geometric parameters of the wedge and the defect have been performed using a distributed computing system. Based on the obtained data, a neural network model was built and trained, capable of identifying the defect and determining its characteristics. The input of the model is spectrograms of the readout signal, and the output is values characterizing the defect.
- 19 October 2023
- Published by Allerton Press in Mechanics of Solids
- Vol. 58 (5) , 1578-1586
Periodic Contact Problems for a Wedge with Friction Forces
Periodic contact problems for a three-dimensional elastic wedge (a dihedral angle, a half-space and a quarter of space are particular cases), taking into a
- 19 October 2023
- Published by Allerton Press in Mechanics of Solids
- Vol. 58 (5) , 1578-1586
Periodic Contact Problems for a Wedge with Friction Forces
Periodic contact problems for a three-dimensional elastic wedge (a dihedral angle, a half-space and a quarter of space are particular cases), taking into a
- 1 September 2023
- Published by The Russian Academy of Sciences in Известия Российской академии наук. Механика твердого тела
- No. 5,p. 170-179
Periodic Contact Problems for a Wedge with Friction Forces
Periodic contact problems for a three-dimensional elastic wedge (a dihedral angle, a half-space and a quarter of space are particular cases), taking into account the Coulomb friction forces in unknown contact areas are considered. One face of the wedge is rigidly fixed, and the other face interacts with an infinite rectilinear chain of identical rigid dies, the axis of the chain is parallel to the edge of the wedge. Friction forces perpendicular or parallel to the edge of the wedge are taken into account. Integral equations are derived in which the series generated by the Cerruti components of the contribution of friction forces are summed exactly. Problems are solved using the method of nonlinear integral equations, which makes it possible to simultaneously determine the contact area and contact pressures. The mechanical characteristics are calculated, the transition from a discrete to a continuous contact area of infinite length is studied.
- 1 September 2023
- Published by The Russian Academy of Sciences in Известия Российской академии наук. Механика твердого тела
- No. 5,p. 170-179
Periodic Contact Problems for a Wedge with Friction Forces
Periodic contact problems for a three-dimensional elastic wedge (a dihedral angle, a half-space and a quarter of space are particular cases), taking into account the Coulomb friction forces in unknown contact areas are considered. One face of the wedge is rigidly fixed, and the other face interacts with an infinite rectilinear chain of identical rigid dies, the axis of the chain is parallel to the edge of the wedge. Friction forces perpendicular or parallel to the edge of the wedge are taken into account. Integral equations are derived in which the series generated by the Cerruti components of the contribution of friction forces are summed exactly. Problems are solved using the method of nonlinear integral equations, which makes it possible to simultaneously determine the contact area and contact pressures. The mechanical characteristics are calculated, the transition from a discrete to a continuous contact area of infinite length is studied.
- Open Access
- 12 October 2022
- Published by FSFEI HE Don State Technical University in Advanced Engineering Research (Rostov-on-Don)
- Vol. 22 (3) , 214-223
Critical Loads of Uniformly Compressed Orthotropic Rectangular Plate on an Elastic Base
Introduction. The problem of critical loads of a compressed orthotropic rectangular plate on an elastic base was considered. The following orthotropy parameters were set for the plate: Poisson coefficients, Young's modules for the main directions, and the shear modulus of the plate material. The components of the compressive load were uniformly distributed along two opposite edges of the plate and acted parallel to the coordinate axes. The edges of the plate were loosely pinched or pivotally supported. Cases were also considered when two parallel edges of the plate were free from loads, and the other two were freely pinched or pivotally supported.Materials and Methods. The problem was studied on the basis of a system of nonlinear Kármán-type equilibrium equations. The critical values of the load parameter were determined from a linearized problem based on a trivial solution. At the same time, the variational method in combination with the finite difference method was used to solve the boundary eigenvalue problem.Results. The problem was reduced to solving a parametric linear boundary eigenvalue problem. In case of boundary conditions of a movable hinge support, exact formulas of eigenvalues and eigenfunctions were given. While in case of free edge pinching, a variational method was used in combination with a finite-difference method, and a computer program for solving the problem was built. It was established that one or two eigenfunctions expressing the deflection of the plate could correspond to the critical value of the compressive load parameter at which the stability of the compressed plate was lost. The results of numerical calculations of the critical values of the compressive load at different values of the orthotropy parameters were presented, and graphs of the corresponding equilibrium forms were constructed. For the case of a long orthotropic plate on an elastic base, it was established that the main term of the asymptotic expansion of the solution to the linear eigenvalue problem was determined from the problem of critical loads of a compressed beam on an elastic base with an elastic modulus that coincides with the elastic modulus of the plate in the longitudinal direction.Discussion and Conclusions. The problem of critical loads of an orthotropic plate compressed in two directions lying on an elastic base was investigated. As the compressive load component increased along one direction, the critical value of the load compressing the plate along the other direction decreased. If an orthotropic plate was compressed by a load along a direction that corresponded to a greater bending stiffness, then the critical value of the loss of stability was greater than the critical value of the compressive load acting along the direction of a lesser bending stiffness. The presence of an elastic foundation increased the bearing capacity of the compressed plate.
- 12 October 2022
- Published by FSFEI HE Don State Technical University in Advanced Engineering Research (Rostov-on-Don)
- Vol. 22 (3) , 214-223
Open AccessCritical Loads of Uniformly Compressed Orthotropic Rectangular Plate on an Elastic Base
Introduction. The problem of critical loads of a compressed orthotropic rectangular plate on an elastic base was considered. The following orthotropy parameters were set for the plate: Poisson coefficients, Young's modules for the main directions, and the shear modulus of the plate material. The components of the compressive load were uniformly distributed along two opposite edges of the plate and acted parallel to the coordinate axes. The edges of the plate were loosely pinched or pivotally supported. Cases were also considered when two parallel edges of the plate were free from loads, and the other two were freely pinched or pivotally supported.Materials and Methods. The problem was studied on the basis of a system of nonlinear Kármán-type equilibrium equations. The critical values of the load parameter were determined from a linearized problem based on a trivial solution. At the same time, the variational method in combination with the finite difference method was used to solve the boundary eigenvalue problem.Results. The problem was reduced to solving a parametric linear boundary eigenvalue problem. In case of boundary conditions of a movable hinge support, exact formulas of eigenvalues and eigenfunctions were given. While in case of free edge pinching, a variational method was used in combination with a finite-difference method, and a computer program for solving the problem was built. It was established that one or two eigenfunctions expressing the deflection of the plate could correspond to the critical value of the compressive load parameter at which the stability of the compressed plate was lost. The results of numerical calculations of the critical values of the compressive load at different values of the orthotropy parameters were presented, and graphs of the corresponding equilibrium forms were constructed. For the case of a long orthotropic plate on an elastic base, it was established that the main term of the asymptotic expansion of the solution to the linear eigenvalue problem was determined from the problem of critical loads of a compressed beam on an elastic base with an elastic modulus that coincides with the elastic modulus of the plate in the longitudinal direction.Discussion and Conclusions. The problem of critical loads of an orthotropic plate compressed in two directions lying on an elastic base was investigated. As the compressive load component increased along one direction, the critical value of the load compressing the plate along the other direction decreased. If an orthotropic plate was compressed by a load along a direction that corresponded to a greater bending stiffness, then the critical value of the loss of stability was greater than the critical value of the compressive load acting along the direction of a lesser bending stiffness. The presence of an elastic foundation increased the bearing capacity of the compressed plate.
- Open Access
- 24 November 2019
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 46 (3) , 59-166
FEATURES OF STRESSES AT THE APEX OF AN ELASTIC WEDGE, SUPPORTED BY A THIN FLEXIBLE COATING ON THE SIDES
ObjectivesTo study the problem of determining the degree of stress at the apex of a wedge-shaped area in cases where the sides (or one of them) are covered with a thin flexible coating.MethodIt is assumed that the coating is not stretchable. On the other side of the wedge-shaped area, the same coating is assumed to be present; it is either fixed, stress-free or in smooth contact with a rigid base. Mathematically, the problem is reduced to the task of determining the roots of characteristic transcendental equations arising from the existence of a nontrivial solution to the system of linear homogeneous equations.ResultsValues for the specific characteristics of the radial component of a stress tensor are determined for different combinations of boundary conditions and solution angles. In particular, the angles at which the singular behaviour of stresses occurs are determined. The case is considered when a special boundary condition is given on the edge surface, simulating the overlay. Characteristic equations are obtained to determine the index of the degree dependency of the asymptotic solution in its vicinity for four variants of boundary conditions. In two cases, transcendental equations are obtained, which are solved numerically.ConclusionCalculations of the first positive roots of the equations depending on the angle of the edge solution and Poisson's ratio are presented. The values of the angles, at which the singular behaviour of stresses occurs, are determined. In the case of a combination of boundary conditions (III – IV), the singular stress behaviour is observed for the angle ???? = ????/8, while in the case of (III – III) this value is equal to ????/4.
- 24 November 2019
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 46 (3) , 59-166
Open AccessFEATURES OF STRESSES AT THE APEX OF AN ELASTIC WEDGE, SUPPORTED BY A THIN FLEXIBLE COATING ON THE SIDES
ObjectivesTo study the problem of determining the degree of stress at the apex of a wedge-shaped area in cases where the sides (or one of them) are covered with a thin flexible coating.MethodIt is assumed that the coating is not stretchable. On the other side of the wedge-shaped area, the same coating is assumed to be present; it is either fixed, stress-free or in smooth contact with a rigid base. Mathematically, the problem is reduced to the task of determining the roots of characteristic transcendental equations arising from the existence of a nontrivial solution to the system of linear homogeneous equations.ResultsValues for the specific characteristics of the radial component of a stress tensor are determined for different combinations of boundary conditions and solution angles. In particular, the angles at which the singular behaviour of stresses occurs are determined. The case is considered when a special boundary condition is given on the edge surface, simulating the overlay. Characteristic equations are obtained to determine the index of the degree dependency of the asymptotic solution in its vicinity for four variants of boundary conditions. In two cases, transcendental equations are obtained, which are solved numerically.ConclusionCalculations of the first positive roots of the equations depending on the angle of the edge solution and Poisson's ratio are presented. The values of the angles, at which the singular behaviour of stresses occurs, are determined. In the case of a combination of boundary conditions (III – IV), the singular stress behaviour is observed for the angle ???? = ????/8, while in the case of (III – III) this value is equal to ????/4.
- Open Access
- 1 April 2019
- Published by FSFEI HE Don State Technical University in Advanced Engineering Research (Rostov-on-Don)
- Vol. 19 (1) , 63-73
Deep convolution neural network model in problem of crack segmentation on asphalt images
Introduction.Early defect illumination (cracks, chips, etc.) in the high traffic load sections enables to reduce the risk under emergency conditions. Various photographic and video monitoring techniques are used in the pavement managing system. Manual evaluation and analysis of the data obtained may take unacceptably long time. Thus, it is necessary to improve the conditional assessment schemes of the monitor objects through the autovision.Materials and Methods.The authors have proposed a model of a deep convolution neural network for identifying defects on the road pavement images. The model is implemented as an optimized version of the most popular, at this time, fully convolution neural networks (FCNN). The teaching selection design and a two-stage network learning process considering the specifics of the problem being solved are shown. Keras and TensorFlow frameworks were used for the software implementation of the proposed architecture.Research Results.The application of the proposed architecture is effective even under the conditions of a limited amount of the source data. Fine precision is observed. The model can be used in various segmentation tasks. According to the metrics, FCNN shows the following defect identification results: IoU - 0.3488, Dice - 0.7381.Discussion and Conclusions.The results can be used in the monitoring, modeling and forecasting process of the road pavement wear.
- 1 April 2019
- Published by FSFEI HE Don State Technical University in Advanced Engineering Research (Rostov-on-Don)
- Vol. 19 (1) , 63-73
Open AccessDeep convolution neural network model in problem of crack segmentation on asphalt images
Introduction.Early defect illumination (cracks, chips, etc.) in the high traffic load sections enables to reduce the risk under emergency conditions. Various photographic and video monitoring techniques are used in the pavement managing system. Manual evaluation and analysis of the data obtained may take unacceptably long time. Thus, it is necessary to improve the conditional assessment schemes of the monitor objects through the autovision.Materials and Methods.The authors have proposed a model of a deep convolution neural network for identifying defects on the road pavement images. The model is implemented as an optimized version of the most popular, at this time, fully convolution neural networks (FCNN). The teaching selection design and a two-stage network learning process considering the specifics of the problem being solved are shown. Keras and TensorFlow frameworks were used for the software implementation of the proposed architecture.Research Results.The application of the proposed architecture is effective even under the conditions of a limited amount of the source data. Fine precision is observed. The model can be used in various segmentation tasks. According to the metrics, FCNN shows the following defect identification results: IoU - 0.3488, Dice - 0.7381.Discussion and Conclusions.The results can be used in the monitoring, modeling and forecasting process of the road pavement wear.