Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Edgar Clyde Repato Lopez has a total of 150 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Computational optimization of diesel particulate filter geometry: coupled effects of cell density and filter diameter on filtration efficiency and back pressure

    by Charles Dwayne G. Tandoc, Henri Luwyz F. Glodo, Gian Gerard O. Mayuyo, Justine Paul B. Ongue, Zandara Faith S. Cabiso, Andrey R. Castillo, Von Gerel L. Vergara, Edgar Clyde R. Lopez

  • Open Access

    Efficient Removal of Methyl Orange from Water Using Chitosan/Polyvinyl Alcohol/MIL-101(Fe) Composite Beads

    by Edgar Clyde R. Lopez

    Synthetic dyes, particularly azo dyes, are widely used in textile and paper industries, contributing to over 700,000 tons of global dye production annually. Up to 10% of these dyes are discharged into wastewater, posing environmental and health risks due to their toxicity, persistence, and low biodegradability. Among the treatment methods, adsorption is favored for its cost-effectiveness, simplicity, and wide applicability. However, conventional adsorbents such as activated carbon and silica gel have limitations, including non-selectivity, poor regeneration, and high cost. Metal-organic frameworks (MOFs), especially MIL-101(Fe), offer a promising alternative due to their high surface area, tunable porosity, and stability in water. In this study, MIL-101(Fe) was successfully synthesized and immobilized in chitosan (CS) and polyvinyl alcohol (PVA) matrices to form composite beads aimed at enhancing the removal of methyl orange (MO) from water. The beads were synthesized via ionic gelation and crosslinked with glutaraldehyde. FTIR and SEM analyses confirmed the successful incorporation of MIL-101(Fe) and the formation of a porous, rough-surfaced morphology favorable for dye adsorption. Batch adsorption experiments demonstrated the effective removal of MO, with adsorption equilibrium best described by the Jovanovich isotherm model, suggesting monolayer adsorption on a homogeneous surface. The maximum adsorption capacity was 28.29 mg/g, outperforming many conventional CS-based adsorbents. Post-adsorption analyses showed significant changes in surface morphology and functional group intensities, indicative of strong dye interaction. These findings highlight the potential of CS/PVA/MIL-101(Fe) composite beads as efficient, recyclable adsorbents for dye-contaminated wastewater treatment and open opportunities for further optimization in environmental remediation applications.

  • Open Access

    Rational composition tuning of NH₂-UiO-66(Ce)/g-C₃N₄/MoS₂ ternary photocatalysts for enhanced visible-light degradation of tetracycline in water

    by Kevin Christian Q. Bacay, Johnzelle G. De Villa, Hannah Sofia B. Magnaye, Edgar Clyde R. Lopez

  • Open Access

    Rice husk hydrochar/paraffin composite as a phase change material for a solar-driven water desalination system

    by Moses Galen D. Dizon, Don Andrei S. Cabanda, Rainiel Jasper N. Dela Rosa, Cyrus D. Bullecer, Dan Airon E. Sobreviga, Edward Henrick H. Aguda, Edgar Clyde R. Lopez

  • Chitosan/Sodium Alginate/Guar Gum Composite Hydrogel as an Adsorbent for the Removal of Chloramphenicol in Water

    by Maria Angelica A. Marasigan, Adrianne L. Torres, Janella Mari C. Vicencio, John Victor P. Mateo, Edgar Clyde R. Lopez

    Pharmaceutical contaminants such as chloramphenicol persist in aquatic environments because they are incompletely removed by conventional wastewater treatment. This study developed a Ca 2 + ‐crosslinked chitosan/sodium alginate/guar gum (CS/SA/GG) composite hydrogel as a sustainable adsorbent for chloramphenicol removal from water. The hydrogel was synthesized through ionic crosslinking and intermolecular hydrogen bonding and characterized by SEM, EDS, FTIR, and pHPZC analyses, confirming a homogeneous network containing abundant –OH, –NH 2 , and –COO − functional groups. A face‐centered central composite design coupled with response surface methodology was used to optimize hydrogel composition and operating conditions. Guar gum was the most influential compositional factor ( p = 1.3048 × 10 − 4 ), while initial chloramphenicol concentration and adsorbent loading were the dominant operating variables. The optimized hydrogel composition (1.00 wt.% chitosan, 0.61 wt.% sodium alginate, and 1.28 wt.% guar gum) achieved an adsorption capacity of 91.14 mg g − 1 , closely matching the predicted value of 90.97 mg g − 1 , whereas the maximum adsorption capacity under optimized conditions reached 112.46 mg g − 1 . Adsorption followed the pseudo‐second‐order kinetic model ( R 2 = 0.9954–0.9999) and was spontaneous and predominantly governed by physisorption. The CS/SA/GG hydrogel provides an effective and tunable adsorbent for antibiotic‐contaminated water through synergistic polymer interactions and accessible adsorption‐active sites.

  • Open Access

    PAN/PVP/CD-MOF composite beads as an adsorbent for the removal of perfluorooctanoic acid in water

    by Anthony B. Alipio, Marian Eira M. Juan, Krishane N. Supnet, Edgar Clyde R. Lopez


  • Optimized Synthesis of Graphene Oxide-Based Hydrogel Composite Beads for Efficient Methyl Orange Removal from Aqueous Solutions

    by Edgar Clyde R. Lopez

    Synthetic dyes such as methyl orange (MO) are persistent water pollutants that pose serious environmental and health hazards due to their toxicity and resistance to biodegradation. Developing efficient, sustainable, and reusable adsorbents for dye removal remains a major challenge in wastewater treatment. This study presents the design and optimization of chitosan/polyethyleneimine/graphene oxide (CS/PEI/GO) hydrogel nanocomposite beads synthesized through controlled cross-linking with glutaraldehyde (GLA) for enhanced adsorption of MO from aqueous solutions. A Box–Behnken experimental design coupled with response surface methodology (RSM) was employed to evaluate the effects of PEI, GO, and GLA concentrations on adsorption capacity. Statistical analysis confirmed the high significance of the cubic model (F = 38.34, p = 0.0001) with a non-significant lack of fit, validating its strong predictive reliability. PEI concentration had the most pronounced effect, providing protonated amine sites for electrostatic interaction with the anionic dye, while GO increased surface area and provided oxygen-containing groups that enhanced hydrogen bonding and π–π interactions. GLA served as a cross-linker to stabilize the hydrogel structure without deactivating active sites. The optimized composition (2.0% PEI, 900 ppm GO, and 2.5% GLA) achieved a predicted adsorption capacity of 23.16 ± 1.05 mg/g, which closely matched the experimentally obtained value of 23.31 ± 1.19 mg/g, with only 2.2% deviation. These findings confirm that the CS/PEI/GO hydrogel nanocomposite provides a balanced integration of structural stability, functional site availability, and high adsorption efficiency, demonstrating its potential as a scalable, eco-friendly material for advanced dye removal and sustainable wastewater treatment.

  • Open Access

    How to Get Away With Instability: Understanding Degradation Mechanisms in Unstable Metal–Organic Frameworks

    by Edgar Clyde R. Lopez

    Metal–organic frameworks (MOFs) represent a versatile class of crystalline porous materials utilized in gas storage, catalysis, and separations. While their modularity allows for exceptional tunability, practical implementation is frequently hindered by structural instability. Many frameworks undergo degradation when exposed to moisture, heat, mechanical stress, or reactive chemicals. This review provides a comprehensive analysis of the degradation mechanisms governing MOF instability, exploring primary pathways including chemical, thermal, mechanical, and photochemical degradation. The influence of environmental factors such as humidity, solvent polarity, pH, and operational cycling is detailed alongside strategies to counteract these vulnerabilities. Specifically, we discuss stabilization techniques involving post‐synthetic modification, the formation of robust composite and hybrid materials, and the critical role of controlled synthesis parameters. A central thesis emerges: instability is not merely a flaw to be eradicated but a complementary aspect of MOF behavior that can be controlled and harnessed. We highlight opportunities for designed instability, where controlled defect engineering and dynamic framework responses are engineered into materials. This perspective shifts the focus from static permanence to dynamic resilience, enabling the design of adaptive, self‐regulating frameworks for advanced applications.


  • Cyclodextrin Covalent-Organic Frameworks: Bridging Host–Guest Chemistry and Porous Materials for Diverse Applications

    by Edgar Clyde R. Lopez

    Cyclodextrin Covalent-Organic Frameworks (CD-COFs) represent a distinctive class of porous crystalline materials that combines the structural order and tunable porosity of covalent-organic frameworks with the host–guest recognition and chiral selectivity of cyclodextrins. This review presents an analysis of recent progress in CD-COF research with emphasis on applications already demonstrated in the literature. CD-COFs show strong performance as highly selective stationary phases for chromatographic separations, enabling resolution of positional isomers and chiral enantiomers through inclusion complexation within ordered cavities supported by a high-surface-area framework. Framework architecture also enables rapid and selective adsorption of micropollutants, perfluorinated compounds, and other persistent contaminants, pointing to use in sustainable water treatment. Studies further report roles in energy and environmental technologies that include solid-state lithium-ion conduction, carbon capture, functional membranes for antibacterial activity, and enantioselective separation. Knowledge gaps persist in scalable and environmentally friendly synthesis, broader coverage of underexplored application spaces, and the translation of host–guest design rules into predictive structure–property relationships. Continued progress positions CD-COFs as a versatile platform for next-generation functional materials that address challenges in separation science, energy storage, and environmental remediation.


  • Polymeric Composite Beads for Pollutant Removal in Water

    by Edgar Clyde R. Lopez

    Water pollution arising from industrial effluents, particularly textile dyes and heavy metals, remains a persistent challenge for environmental protection and public health. Many conventional treatment technologies exhibit limited selectivity, high operational cost, or generate secondary waste streams, prompting sustained interest in alternative materials and treatment concepts. This review focuses on polymeric composite beads as a versatile platform for wastewater treatment, emphasizing synthesis routes, functionalization strategies, and pollutant removal mechanisms. By combining polymer matrices with inorganic fillers, carbonaceous phases, or bio‐derived additives, composite beads achieve enhanced adsorption through electrostatic attraction, chelation, ion exchange, and surface complexation, while maintaining structural integrity and reuse potential. Advances in material design have enabled improved adsorption capacity, selectivity, and regeneration behavior through controlled crosslinking, surface modification, and hierarchical architectures. Several challenges remain insufficiently resolved. Long‐term chemical and mechanical stability under variable pH, ionic strength, and multi‐contaminant conditions, regeneration‐induced degradation, additive leaching, and scale‐up from batch testing to flow‐based systems continue to hinder deployment. This review critically evaluates reported performance data by accounting for experimental conditions and system configuration, distinguishing proof‐of‐concept studies from application‐oriented investigations. Practical benchmarks for deployment readiness are proposed, prioritizing durability, safety, and lifecycle performance.