Jinwei Qi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jinwei Qi has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Kai Tian
Henan University of Science and Technology,College of Vehicle Transportation Engineering,Luoyang,China,471003
5 shared publications - Weihua Liu
School of Microelectronics, Xi'an Jiaotong University 1 , Xi'an 710049
4 shared publications Menghua Wang
School of Microelectronics, Xi’an Jiaotong University, Xi’an, China
3 shared publications- Teng Long
Department of Engineering, University of Cambridge, Cambridge, UK
3 shared publications - Xin Li
Xi’an Jiaotong University
3 shared publications - Xu Yang
Xi’an Jiaotong University
3 shared publications
Latest Publications
- 25 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (1) , 43-49
Towards the True Zero-Voltage-Switching Boundary
Aiming for high-efficiency and high power-density converters—where turn-on loss normally dominates overall losses—zero-voltage-switching (ZVS) techniques are the most popular approach to eliminate turn-on loss. Notably, inaccurate ZVS boundaries can misguide design, causing under- and/or over-engineering of the load current, resulting in a loss of ZVS and/or excessive conduction and turn-off losses, thereby preventing optimal performance. However, this article reports a discovery, through experimental measurement, that state-of-the-art models can produce significant errors ranging from 18% to 59%. In this article, the work presents an in-depth study of the true zero-voltage switching boundary (TZVSB). An analytical overview of existing prediction methods is provided first. To accurately identify the TZVSB, a groundbreaking model is proposed and experimentally validated, incorporating previously unaccounted impact factors—including other capacitances, such as snubber capacitances, parasitic capacitances of magnetics and PCBs, long dead-time effects, dissipated energies, and asymmetry between upper and lower switches. As a result, the proposed model achieves unprecedentedly low errors ranging from 0.09% to 3.6%. Furthermore, it establishes, for the first time, the fundamental equivalence between energy-based and charge-based analyses, thereby unifying the two mainstream analytical frameworks that have remained disconnected for decades and validating their theoretical foundations.
- 25 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (1) , 43-49
Towards the True Zero-Voltage-Switching Boundary
Aiming for high-efficiency and high power-density converters—where turn-on loss normally dominates overall losses—zero-voltage-switching (ZVS) techniques are the most popular approach to eliminate turn-on loss. Notably, inaccurate ZVS boundaries can misguide design, causing under- and/or over-engineering of the load current, resulting in a loss of ZVS and/or excessive conduction and turn-off losses, thereby preventing optimal performance. However, this article reports a discovery, through experimental measurement, that state-of-the-art models can produce significant errors ranging from 18% to 59%. In this article, the work presents an in-depth study of the true zero-voltage switching boundary (TZVSB). An analytical overview of existing prediction methods is provided first. To accurately identify the TZVSB, a groundbreaking model is proposed and experimentally validated, incorporating previously unaccounted impact factors—including other capacitances, such as snubber capacitances, parasitic capacitances of magnetics and PCBs, long dead-time effects, dissipated energies, and asymmetry between upper and lower switches. As a result, the proposed model achieves unprecedentedly low errors ranging from 0.09% to 3.6%. Furthermore, it establishes, for the first time, the fundamental equivalence between energy-based and charge-based analyses, thereby unifying the two mainstream analytical frameworks that have remained disconnected for decades and validating their theoretical foundations.
- 1 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (4) , 4187-4201
Comparative Study on High-Temperature Electrical Properties of 1.2 kV SiC MOSFET and JBS-Integrated MOSFET
For 4H-SiC mosfet s, the parasitic PiN body diode causes problems such as significant forward voltage drop of body diode and poor reverse recovery characteristics during high-temperature operation. A reasonable solution is a mosfet with an integrated Schottky barrier diode to deactivate the PiN body diode. Since SiC mosfet s can operate at extremely high temperatures, the characterization of electrical parameters at high temperatures and changing with the temperature are very important for high power applications and system reliability. However, there is a lack of comparison and analysis of the two devices on electrical properties at ultrahigh temperatures. In this article, a 1.2 kV conventional mosfet and a mosfet integrated with a junction barrier Schottky diode (JBSFET) were fabricated with a consistent process flow. In the temperature range from 300 to 575 K, analytical models of the temperature-dependent electrical parameters of these two devices were established and compared, which were successfully verified by the measurements. These models can provide guidance for ultrahigh temperature applications of JBSFETs. Temperature-related expressions can also be used for junction temperature monitoring of temperature-sensitive electrical parameters. Experimental results show that JBSFET has better third quadrant conduction characteristics and higher temperature stability below 450 K, but loses obvious performance advantages at 575 K. So, the recommended operating temperature range of JBSFET is from 300 to 450 K. Finally, the continuous operation performance of the body diodes in buck converters is analyzed. The higher efficiency of buck converter based on JBSFET's body diode indicates its great application potential in compact converters, especially in the recommended temperature range.
- 1 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (4) , 4187-4201
Comparative Study on High-Temperature Electrical Properties of 1.2 kV SiC MOSFET and JBS-Integrated MOSFET
For 4H-SiC mosfet s, the parasitic PiN body diode causes problems such as significant forward voltage drop of body diode and poor reverse recovery characteristics during high-temperature operation. A reasonable solution is a mosfet with an integrated Schottky barrier diode to deactivate the PiN body diode. Since SiC mosfet s can operate at extremely high temperatures, the characterization of electrical parameters at high temperatures and changing with the temperature are very important for high power applications and system reliability. However, there is a lack of comparison and analysis of the two devices on electrical properties at ultrahigh temperatures. In this article, a 1.2 kV conventional mosfet and a mosfet integrated with a junction barrier Schottky diode (JBSFET) were fabricated with a consistent process flow. In the temperature range from 300 to 575 K, analytical models of the temperature-dependent electrical parameters of these two devices were established and compared, which were successfully verified by the measurements. These models can provide guidance for ultrahigh temperature applications of JBSFETs. Temperature-related expressions can also be used for junction temperature monitoring of temperature-sensitive electrical parameters. Experimental results show that JBSFET has better third quadrant conduction characteristics and higher temperature stability below 450 K, but loses obvious performance advantages at 575 K. So, the recommended operating temperature range of JBSFET is from 300 to 450 K. Finally, the continuous operation performance of the body diodes in buck converters is analyzed. The higher efficiency of buck converter based on JBSFET's body diode indicates its great application potential in compact converters, especially in the recommended temperature range.
- 17 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (4) , 1841-1846
A Highly Efficient Annealing Process With Supercritical N2O at 120 °C for SiO2/4H–SiC Interface
A novel post-oxidation annealing (POA) process with supercritical N 2 O (SCN 2 O) fluid is reported to be highly effective in improving the interface properties of the SiO 2 /4H-silicon carbide (SiC) (0001) systems. After SCN 2 O POA, the interface state density reduces to 2.8 ×10 11 eV -1 cm -2 , which is about 3.5 times lower than that after a traditional high-temperature N 2 O POA process. Meanwhile, the highest oxide critical electric field shows an increase of 18.19% and the near-interfacial oxide traps is reduced by 69.90% compared with that after N 2 O POA process. The process temperature is as low as 120 °C. The significantly reduced processing temperature avoids additional defect generation while the supercritical state provides a stronger nitridation effect. SCN 2 O annealing is a promising candidate for POA process toward high-performance SiC power metal-oxide-semiconductor field effect transistors (MOSFETs).
- 17 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (4) , 1841-1846
A Highly Efficient Annealing Process With Supercritical N2O at 120 °C for SiO2/4H–SiC Interface
A novel post-oxidation annealing (POA) process with supercritical N 2 O (SCN 2 O) fluid is reported to be highly effective in improving the interface properties of the SiO 2 /4H-silicon carbide (SiC) (0001) systems. After SCN 2 O POA, the interface state density reduces to 2.8 ×10 11 eV -1 cm -2 , which is about 3.5 times lower than that after a traditional high-temperature N 2 O POA process. Meanwhile, the highest oxide critical electric field shows an increase of 18.19% and the near-interfacial oxide traps is reduced by 69.90% compared with that after N 2 O POA process. The process temperature is as low as 120 °C. The significantly reduced processing temperature avoids additional defect generation while the supercritical state provides a stronger nitridation effect. SCN 2 O annealing is a promising candidate for POA process toward high-performance SiC power metal-oxide-semiconductor field effect transistors (MOSFETs).
- 30 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (6) , 6954-6966
Comprehensive Assessment of Avalanche Operating Boundary of SiC Planar/Trench MOSFET in Cryogenic Applications
The avalanche ruggedness of power devices becomes a crucial issue to ensure the safe operation of the power conversion systems, particularly under the extreme temperature conditions. In this paper, the avalanche capability of SiC planar/trench MOSFETs is systematically evaluated and analyzed over the temperature range of 90 to 340 K. Importantly, the essential mechanisms and temperature dependence of avalanche failure under cryogenic conditions are further explored by combining many analysis methods such as TCAD simulations, the unclamped inductive switching characterizations, and the transient junction temperature prediction. The highest avalanche energy density of 171.24 mJ/mm2 at 90K indicates the great application potential of SiC planner MOSFET in cryogenic electronics. Moreover, the safe avalanche operation boundary (AOB) model is established over the cryogenic temperature range. The relevant analysis method and AOB model can be used to accurately evaluate and quantitatively predict the avalanche capability of SiC planar/trench MOSFETs for the cryogenic converter design.
- 30 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (6) , 6954-6966
Comprehensive Assessment of Avalanche Operating Boundary of SiC Planar/Trench MOSFET in Cryogenic Applications
The avalanche ruggedness of power devices becomes a crucial issue to ensure the safe operation of the power conversion systems, particularly under the extreme temperature conditions. In this paper, the avalanche capability of SiC planar/trench MOSFETs is systematically evaluated and analyzed over the temperature range of 90 to 340 K. Importantly, the essential mechanisms and temperature dependence of avalanche failure under cryogenic conditions are further explored by combining many analysis methods such as TCAD simulations, the unclamped inductive switching characterizations, and the transient junction temperature prediction. The highest avalanche energy density of 171.24 mJ/mm2 at 90K indicates the great application potential of SiC planner MOSFET in cryogenic electronics. Moreover, the safe avalanche operation boundary (AOB) model is established over the cryogenic temperature range. The relevant analysis method and AOB model can be used to accurately evaluate and quantitatively predict the avalanche capability of SiC planar/trench MOSFETs for the cryogenic converter design.
- 27 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (12) , 13384-13399
Comparative Temperature Dependent Evaluation and Analysis of 1.2-kV SiC Power Diodes for Extreme Temperature Applications
Considering potential applications related to superconductivity and aerospace (typically less than 100 K), in this article, the temperature dependence of silicon carbide (SiC) power diodes is systematically characterized and analyzed over a wide temperature range of 90-478 K, especially focusing on cryogenic temperature. First, the static performance degradation mechanism of SiC diodes is established in an ultrawide temperature range, including forward/reverse I-V characteristics and junction capacitance (C j ) characteristics. Second, the reverse recovery characteristics are achieved, including peak reverse recovery current (Irm), reverse recovery charge (Q rr ), and switching energy (Esw), clarifying a clearer internal relationship between reverse recovery and junction temperature. Meanwhile, the aforementioned critical parameters are further analyzed on an electrical scale with normal atmosphere temperature, including switching speed range of 62.3-2054.8 A/μs, load current range of 6-30 A, and dc voltage range of 400-1000 V. Third, based on newly proposed power loss analysis method, the continuous operation performance of SiC diodes is quantified and analyzed in actual cryogenic converters. The excellent temperature dependence indicates that SiC diodes have great superiority for extreme applications. Importantly, SiC mosfet's body diode shows the great potential to operate as a freewheeling diode in the compact converter, especially at cryogenic temperature.
- 27 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (12) , 13384-13399
Comparative Temperature Dependent Evaluation and Analysis of 1.2-kV SiC Power Diodes for Extreme Temperature Applications
Considering potential applications related to superconductivity and aerospace (typically less than 100 K), in this article, the temperature dependence of silicon carbide (SiC) power diodes is systematically characterized and analyzed over a wide temperature range of 90-478 K, especially focusing on cryogenic temperature. First, the static performance degradation mechanism of SiC diodes is established in an ultrawide temperature range, including forward/reverse I-V characteristics and junction capacitance (C j ) characteristics. Second, the reverse recovery characteristics are achieved, including peak reverse recovery current (Irm), reverse recovery charge (Q rr ), and switching energy (Esw), clarifying a clearer internal relationship between reverse recovery and junction temperature. Meanwhile, the aforementioned critical parameters are further analyzed on an electrical scale with normal atmosphere temperature, including switching speed range of 62.3-2054.8 A/μs, load current range of 6-30 A, and dc voltage range of 400-1000 V. Third, based on newly proposed power loss analysis method, the continuous operation performance of SiC diodes is quantified and analyzed in actual cryogenic converters. The excellent temperature dependence indicates that SiC diodes have great superiority for extreme applications. Importantly, SiC mosfet's body diode shows the great potential to operate as a freewheeling diode in the compact converter, especially at cryogenic temperature.
- 20 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (8) , 7742-7748
Mixed Analog–Digital (MAD) Converters for High Power Density DC–DC Conversions
Conventional switched-mode power supplies have intrinsic instantaneous power pulsation at the switching frequency thus require bulky filters. To improve the power density, this paper proposes a concept named the mixed analog-digital (MAD) which can be applied as dc-dc converters. By inserting an analog voltage component between the load and source, the output voltage naturally has much smaller fluctuation thereby much smaller passive filter is required. Simulations and experiments validate that the proposed MAD concept can be applied as dc-dc converters to significantly increase the power density.
- 20 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (8) , 7742-7748
Mixed Analog–Digital (MAD) Converters for High Power Density DC–DC Conversions
Conventional switched-mode power supplies have intrinsic instantaneous power pulsation at the switching frequency thus require bulky filters. To improve the power density, this paper proposes a concept named the mixed analog-digital (MAD) which can be applied as dc-dc converters. By inserting an analog voltage component between the load and source, the output voltage naturally has much smaller fluctuation thereby much smaller passive filter is required. Simulations and experiments validate that the proposed MAD concept can be applied as dc-dc converters to significantly increase the power density.
- 6 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (10) , 4279-4286
Comprehensive Characterization of the 4H-SiC Planar and Trench Gate MOSFETs From Cryogenic to High Temperature
- 6 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (10) , 4279-4286
Comprehensive Characterization of the 4H-SiC Planar and Trench Gate MOSFETs From Cryogenic to High Temperature
- 3 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (5) , 2307-2313
An Improved 4H-SiC Trench-Gate MOSFET With Low ON-Resistance and Switching Loss
In this paper, an improved 4H-SiC U-shaped trench-gate metal-oxide-semiconductor field-effect transistors (UMOSFETs) structure with low on-resistance (Ron) and switching energy loss is proposed. The novel structure features an added n-type region, which reduces on-resistance of the device significantly while maintaining the breakdown voltage (VBR). In addition, the gate of the improved structure is designed as a p-n junction to reduce the switching energy loss. Simulations by Sentaurus TCAD are carried out to reveal the working mechanism of this improved structure. For the static performance, the on-resistance and the figure of merit (FOM = VBR²/Ron) of the optimized structure are improved by 40% and 44%, respectively, as compared to a conventional trench MOSFET without the added n-type region and modified gate. For the dynamic performance, the turn-on time (Ton) and turn-off time (Toff) of the proposed structure are both shorter than that of the conventional structure, bringing a 43% and 30% reduction in turn-on energy loss and total switching energy loss (ESW).
- 3 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (5) , 2307-2313
An Improved 4H-SiC Trench-Gate MOSFET With Low ON-Resistance and Switching Loss
In this paper, an improved 4H-SiC U-shaped trench-gate metal-oxide-semiconductor field-effect transistors (UMOSFETs) structure with low on-resistance (Ron) and switching energy loss is proposed. The novel structure features an added n-type region, which reduces on-resistance of the device significantly while maintaining the breakdown voltage (VBR). In addition, the gate of the improved structure is designed as a p-n junction to reduce the switching energy loss. Simulations by Sentaurus TCAD are carried out to reveal the working mechanism of this improved structure. For the static performance, the on-resistance and the figure of merit (FOM = VBR²/Ron) of the optimized structure are improved by 40% and 44%, respectively, as compared to a conventional trench MOSFET without the added n-type region and modified gate. For the dynamic performance, the turn-on time (Ton) and turn-off time (Toff) of the proposed structure are both shorter than that of the conventional structure, bringing a 43% and 30% reduction in turn-on energy loss and total switching energy loss (ESW).
- 4 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (9) , 9105-9117
Temperature Dependence of Dynamic Performance Characterization of 1.2-kV SiC Power mosfets Compared With Si IGBTs for Wide Temperature Applications
Due to the superior material properties, SiC MOSFET is a promising candidate switching device for high power density and high efficiency power conversion system. The robustness of switching device under extreme temperature condition becomes a crucial factor to ensure power conversion system safely and continuously operating. In this paper, the temperature dependence of dynamic performance of 1.2 kV 4H-SiC power MOSFETs is systematically characterized over such wide temperature range of 90K to 493K and compared with 1.2kV Si IGBT by a layout optimized double pulse tester (DPT). The degradation of dynamic on-resistance related interface traps is analyzed specially and the energy loss caused by degradation is quantified at cryogenic temperatures. Besides, to validate the performance of SiC MOSFET under safely and continuously operating conditions for cryogenic temperature application, a hard switched non-isolated DC-DC buck converter is designed and tested to estimate temperature dependence of conversion efficiency under temperature range of 90K to 290K. Moreover, the further characterizations are conducted with gate resistance range of 2° to 20°, load current range of 3-30A and converter output current of 5-22.5A under different switching frequency (up to 150kHz) to validate high power and high frequency application potential of SiC MOSFET.
- 4 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (9) , 9105-9117
Temperature Dependence of Dynamic Performance Characterization of 1.2-kV SiC Power mosfets Compared With Si IGBTs for Wide Temperature Applications
Due to the superior material properties, SiC MOSFET is a promising candidate switching device for high power density and high efficiency power conversion system. The robustness of switching device under extreme temperature condition becomes a crucial factor to ensure power conversion system safely and continuously operating. In this paper, the temperature dependence of dynamic performance of 1.2 kV 4H-SiC power MOSFETs is systematically characterized over such wide temperature range of 90K to 493K and compared with 1.2kV Si IGBT by a layout optimized double pulse tester (DPT). The degradation of dynamic on-resistance related interface traps is analyzed specially and the energy loss caused by degradation is quantified at cryogenic temperatures. Besides, to validate the performance of SiC MOSFET under safely and continuously operating conditions for cryogenic temperature application, a hard switched non-isolated DC-DC buck converter is designed and tested to estimate temperature dependence of conversion efficiency under temperature range of 90K to 290K. Moreover, the further characterizations are conducted with gate resistance range of 2° to 20°, load current range of 3-30A and converter output current of 5-22.5A under different switching frequency (up to 150kHz) to validate high power and high frequency application potential of SiC MOSFET.