MHMatthew J. Hurlock

Matthew J. Hurlock

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Matthew J. Hurlock has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Directed Assembly of Nonplanar TPE-Based Esters via C–H···O═C Hydrogen Bonds at the Solution/Solid Interface

    by Matthew J. Hurlock, Shammi Rana, Kristen N. Johnson, K. W. Hipps, Qiang Zhang, Ursula Mazur

    Nonconventional hydrogen bonds are attractive molecular interactions that can generate self-assembled, dynamic, yet robust, multifunctional hydrogen-bonded organic 2D and 3D frameworks (HOFs). To effectively create and manipulate such HOF structures requires detailed knowledge of their molecular geometrical ordering properties. Here, we employ scanning tunneling microscopy (STM) and X-ray crystallography to probe the differential control of C-H···O═C hydrogen bonding in the ordering of nonplanar tetraphenylethene (TPE)-based methyl ester derivatives at the solution/solid interface and in the solid state. The esters include the core structures of tetraphenylethene (Me4TPE), tetraphenylethene biphenyl (Me2TPDC), and tetraphenylethene tetrakis-phenyl (Me4ETTC), both meta- and para-substituted. At the solution/HOPG (highly ordered pyrolytic graphite) interface, the esters form surprisingly robust monolayer assemblies stabilized by a combination of multiple intermolecular C-H···O═C hydrogen bonds, π-π interactions, and molecule-substrate interactions. The proposed dominant C-H···O═C bonds involve cyclic motifs that show cooperative recognition together with bifurcated or three-centered hydrogen bonding geometries. Mostly similar conformations of C-H···O═C bonds exist in the solid state. Both molecular geometry and energetic parameters are found to complement each other in determining the extent and type of hydrogen bonding present in the tetraphenylethene-based methyl ester organizations at the solution/solid interface and in the solid state.


  • Elucidation of Metal Identity Effects on Noble Gas Separations in Zeolitic Imidazolate Frameworks

    by Matthew J. Hurlock, Min-Bum Kim, Sun Hae Ra Shin, Praveen K. Thallapally

    Pressure-responsive, or breathing, metal-organic frameworks (MOFs) that exhibit step-shaped gas adsorption isotherm behavior are highly promising materials for gas capture and separations. Utilizing porous materials to separate the noble gases Xe and Kr has been recognized as an energy-saving and cost-effective alternative to the traditional separation method of cryogenic distillation. Herein, a series of isoreticular flexible benzimidazolate-based (bim) zeolitic imidazolate frameworks (ZIFs) of the form M(bim)2 (M = Zn (ZIF-7), Co (ZIF-9), and Cd (CdIF-13)) were examined to elucidate the effects of metal identity on the pressure-responsive-phase changes during Xe and Kr gas adsorption. Phase transition pressure threshold positions, prestep gas uptakes, and step uptake capacities were compared across multiple temperatures. The well studied Zn analog ZIF-7 was used as the baseline material for comparison and determination of metal substitution effects. Compared to ZIF-7, metal substitution to form ZIF-9 and CdIF-13 resulted in substantially improved Xe adsorption performance. Notably, metal identity dramatically influenced prestep adsorption and threshold adsorption pressure, decreasing the prestep adsorption and increasing the threshold pressure needed to induce the phase transition. Remarkably, CdIF-13 showed negligible prestep adsorption of Xe and a Xe capacity of more than 4 mmol/g at 1 bar and 193 K. Comparison of the estimated usable capacities resulted in a ranking of CdIF-13 > ZIF-9 > ZIF-7. Lastly, the Xe adsorption capacity and Xe/Kr selectivity are compared to other promising MOFs for noble gas capture.


  • Low Power, High Sensitivity Gas Sensors for Detecting Propellant Aging

    by Matthew J. Hurlock, Stephen J. Percival, Leo J. Small, Tina M. Nenoff, Mara E. Schindelholz

    Chemically robust, selective, low‐power sensors could aid in the monitoring of nitro‐based propellant compounds. The metal–organic framework (MOF) M‐MOF‐74 (M = Ni, Mg, Ni x Mg 1‐x ) offers exceptional sensitivity and selectivity toward trace amounts of NO 2 , a primary degradation product of nitro‐group‐containing molecules, such as propellants. MOF‐74‐based impedance sensors have been developed to detect nitro group off‐gassing due to propellant aging. Herein, additional studies were conducted to test the limits of sensor performance and investigate the long‐term stability of these sensors when exposed to elevated NO 2 concentrations indicative of propellant aging. Tested sensor materials consisted of either monometallic or mixed metal M‐MOF‐74 (M = Ni, Mg, Ni x Mg 1‐x ) films fabricated through drop‐cast or solvothermal synthesis. Repeated exposure studies were performed over a 24‐week period, with exposures to 5 ppm NO 2 in nitrogen occurring every 4 weeks at two different temperatures, with a reactivation step in between the change in temperature. The sensor performance was evaluated by analysis of the changing sensor impedance before and after repeated exposures. Both the MOF's metal center and fabrication method contributed to the sensor deactivation rate. Structural and chemical analysis of the MOF‐sensors indicated that the analyte, NO 2 , led to sensor degradation through a proposed mechanism involving NO 2 insertion and metal nitrite complexation. Understanding the abilities and limitations of these types of MOF‐based sensors under aggressive NO 2 conditions will further the development of devices specifically tailored for the relevant service environment conditions.


  • Exceptional NH 3 Detection by Cu(cyhdc) MOF Sensor Due to H 2 O Coadsorption

    by Leo J. Small, Stephen J. Percival, Matthew J. Hurlock, David X. Rademacher, Michael E. Ureña, Melissa L. Meyerson, Mara E. Schindelholz, Tina M. Nenoff

    Metal-organic framework (MOF)-based electrical impedance sensors are a growing class of sensors that show utility in the detection of environmentally toxic gases. Detection of trace NH3 has been particularly difficult to design due to the low electrical response of NH3. However, this has been circumvented by judiciously selecting a MOF that has enhanced electrical response to NH3 due to coadsorption with predominant atmospheric gases such as water. Herein, an MOF Cu(cyhdc) based sensor has been successfully demonstrated for the enhanced detection of environmentally toxic NH3 gas. The sensor shows a change in impedance when it is exposed to 5 ppm of NH3. At 20 °C, >30% relative humidity (RH) is necessary to elicit a change, with the response increasing with RH and reaching 3170× at 92% RH, producing the largest published response to NH3 for a MOF direct electrical sensor. In the absence of water, no change is observed toward 5 ppm of NH3 over 20-50 °C. This electrical response is largely driven by huge decreases in the imaginary component of the impedance, attributed to increased capacitance at the surface of the MOF crystallites upon NH3 and H2O coadsorption. Complementary structural and microstructural characterization proves that the Cu(cyhdc) crystalline structure and morphology remain intact under trace NH3 and/or H2O adsorption. Despite extremely low NH3, loadings seen in TGA, XPS, and FT-IR confirm NH3 and H2O adsorption, and changes to the metal-carboxylate IR peak positions are observed upon NH3 adsorption. Concentrated primarily at the outer surfaces of the MOF crystallites, this NH3 and H2O coadsorption effectively increases the surface capacitance across the Cu(cyhdc) powder and enables direct electrical detection of trace NH3. Together, these results demonstrate how coadsorption of specific molecules (H2O) can be used to enable the electrical detection of trace toxic gases that would otherwise not have produced a MOF sensor response.


  • Mechanisms Governing Noble Gas Adsorption in a Copper-Based Metal–Organic Framework

    by Keerthana Krishnan, Matthew J. Hurlock, Sun Hae Ra Shin, Mark K. Murphy, Praveen K. Thallapally

    Metal-organic frameworks (MOFs) are promising sorbents for the capture and separation of noble gases from off-gases at nuclear reprocessing sites and nuclear waste repositories. However, little is known about the degradation mechanism of MOFs under ionizing radiation. Herein, CuBTC was exposed to high doses of 60Co gamma irradiation, between 1 and 5 MGy, and characterized, to elucidate the impact of radiation. Postirradiation, the N2 gas adsorption of CuBTC decreased, but unexpectedly, gas uptake and surface area at the moderate dose of 3 MGy were lower than at a dose of 5 MGy. Xenon (Xe) gas uptake also decreased upon irradiation, but the adsorption loss was proportional to the irradiation dose received. In contrast, the krypton (Kr) uptake increased until 5 MGy indicating that pore constriction had occurred. Comparison of the reflection intensities of the (200) and (220) aligned with observed surface area trends postirradiation. Fourier transform infrared spectroscopy was used to probe the local structure of the framework, and the noncoordinated linker bonding moieties increased then decreased. This suggested that gamma irradiation caused coordination defects that blocked the pores of the MOF, aligning with the gas adsorption and X-ray analyses. Combined, these findings indicate that though the bulk framework remains stable up to 5 MGy, the pore properties of the MOF are acutely sensitive to irradiation. Altogether, this work illustrates a methodology to comprehend the porosity changes of an MOF upon exposure to high-dose ionizing radiation.

  • Impact of SO2 on NiFe Nanoparticle Exsolution and Dissolution from LaFe0.9Ni0.1O3 Perovskite Oxides

    by Musa Najimu, Matthew J. Hurlock, Sahanaz Parvin, Courtney Brea, Neelesh Kumar, Yoon Jin Cho, Yiqing Wu, Guoxiang Hu, Zili Wu, Eranda Nikolla, et al.


  • Control of Permanent Porosity in Type 3 Porous Liquids via Solvent Clustering

    by Dennis Robinson Brown, Matthew J. Hurlock, Tina M. Nenoff, Jessica M. Rimsza

    Porous liquids (PLs) are an exciting new class of materials for carbon capture due to their high gas adsorption capacity and ease of industrial implementation. They are composed of sorbent particles suspended in a nonadsorbed solvent, forming a liquid with permanent porosity. While PLs have a vast number of potential compositions based on the number of solvents and sorbent materials available, most of the research has been focused on the selection of the sorbent rather than the solvent. Therefore, PL design criteria on the supramolecular structures of the solvent are explored to create a fundamental understanding of how the solvent enables PL formation for rapid discovery of new PL compositions. Atomistic molecular dynamics simulation of eight solvents with a range of molecular sizes, shapes, and intramolecular bonding was performed, identifying that the shape and size of molecular clusters formed in the solvent are the driving predictor of PL formation rather than the size of the individual solvent molecule. The results demonstrate a significant departure from common approaches to PL formation based on the steric exclusion of solvent molecules from the sorbent via the size of the pore aperture. A modeling and experimental validation study further supports these findings. Through this computational material design study, a previously unexplored mechanism in PL formation, solvent-solvent clustering, is identified as a critical factor for the accelerated discovery of liquid phase carbon capture materials.


  • Exceptional Electrical Detection of Trace NO2 via Mixed Metal MOF-on-MOF Film-Based Sensors

    by Matthew J. Hurlock, Matthew S. Christian, Leo J. Small, Stephen J. Percival, David X. Rademacher, Mara E. Schindelholz, Tina M. Nenoff

    The tunability of metal-organic frameworks (MOFs) makes them exceptional materials for the development of highly selective, low-power sensors for toxic gas detection. Herein, we demonstrate enhanced detection of NO2 gas by a MOF-based electrical impedance sensor made using a unique mixed metal MOF-on-MOF synthesis. A combined experimental and computational study was performed using the exemplar NixMg1-x-MOF-74 to understand the fundamental structure-property relationships behind metal mixing and MOF film synthesis methods on sensor performance. Density functional theory results indicated that the presence of Ni in Mg-MOF-74 increased framework stability and increased the electron density of states at lower energies near the HOMO, as well as enhanced the NO2-Mg adsorption interaction. Impedance data of the NixMg1-x-MOF-74 films with larger Ni contents showed greater impedance change after exposure to 1 ppm of NO2 gas. Furthermore, when synthesized through either a drop-cast or direct solvothermal film growth approach, the monometallic Ni-based sensors had the best performance. However, the mixed metal NixMg1-x-MOF-74 sensors synthesized through a MOF-on-MOF approach resulted in the highest impedance change, outperforming all monometallic Ni-based sensors. In particular, the mixed metal Ni-on-Mg-MOF-74 film was the best-performing sensor with an impedance change of 309 upon trace NO2 exposure. Change in impedance response after NO2 exposure was improved by 52% compared to the best monometallic Ni-on-Ni-MOF-74 sensor. Structural analysis of the Ni-on-Mg film showed that the first Mg-MOF-74 layer acts as a structural template controlling the structural features of the final film after metal exchange with Ni. This led to improved film quality, evidenced by the greater crystallinity and larger MOF grain sizes, and resulted in enhanced sensor performance which was not achievable through other metal mixing methods. Altogether, this study identifies structure-property relationships and synthetic templating methods that inform MOF-based sensor design, allowing for improved detection of toxic compounds.


  • Exploring the Complex Chemistry and Degradation of Ascorbic Acid in Aqueous Nanoparticle Synthesis

    by Debashree Roy, Hannah M. Johnson, Matthew J. Hurlock, Kingshuk Roy, Qiang Zhang, Liane M. Moreau

    Ascorbic acid (AA) is the most widely used reductant for noble metal nanoparticle (NP) synthesis. Despite the synthetic relevance, its aqueous chemistry remains misunderstood, due in part to various assumptions about its reduction pathway which are insufficiently supported by experimental evidence. This study aims to provide an understanding of the complex chemistry associated with AA under aqueous conditions. We demonstrate that (i) AA undergoes appreciable degradation in alkaline solution on a timescale relevant to NP synthesis, (ii) contrary to popular belief, AA does not degrade into dehydroascorbic acid (DHA), nor is DHA the oxidized product of AA under noble metal NP synthetic conditions, (iii) DHA, which readily degrades under alkaline conditions, can also effectively reduce metal salt precursors to metal NPs, (iv) neither ascorbate nor dehydroascorbate act as surface capping agents post‐synthetically on the NPs (v) AA degradation time greatly affects the morphology and polydispersity of the resultant NP. Results from our mechanistic investigation enabled us to utilize purposefully‐aged reductants to achieve control over shape yield and monodispersity in the seed‐mediated synthesis of Au nanorods. Our findings have important implications for achieving monodispersed products in the many metal NP synthesis reactions that make use of AA as a reducing agent.


  • Open Access

    Exploring the Complex Chemistry and Degradation of Ascorbic Acid in Aqueous Nanoparticle Synthesis

    by Debashree Roy, Hannah M. Johnson, Matthew J. Hurlock, Kingshuk Roy, Qiang Zhang, Liane M. Moreau

    Ascorbic acid (AA) is the most widely used reductant for noble metal nanoparticle (NP) synthesis. Despite the synthetic relevance, its aqueous chemistry remains misunderstood, due in part to various assumptions about its reduction pathway which are insufficiently supported by experimental evidence. This study aims to provide an understanding of the complex chemistry associated with AA under aqueous conditions. We demonstrate that (i) AA undergoes appreciable degradation in alkaline solution on a timescale relevant to NP synthesis, (ii) contrary to popular belief, AA does not degrade into dehydroascorbic acid (DHA), nor is DHA the oxidized product of AA under noble metal NP synthetic conditions, (iii) DHA, which readily degrades under alkaline conditions, can also effectively reduce metal salt precursors to metal NPs, (iv) neither ascorbate nor dehydroascorbate act as surface capping agents post‐synthetically on the NPs (v) AA degradation time greatly affects the morphology and polydispersity of the resultant NP. Results from our mechanistic investigation enabled us to utilize purposefully‐aged reductants to achieve control over shape yield and monodispersity in the seed‐mediated synthesis of Au nanorods. Our findings have important implications for achieving monodispersed products in the many metal NP synthesis reactions that make use of AA as a reducing agent.