Na Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Na Guo has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Tao Liu
College of Ocean Science and Engineering, Institute of Marine Materials Science and Engineering, Shanghai Maritime University, Shanghai, China
2 shared publications - Yaohua Dong
College of Ocean Science and Engineering, Shanghai Maritime University, Shanghai, 201306, China
2 shared publications - Jingrong Liu
College of Ocean Science and Engineering, Shanghai Maritime University, Shanghai 201306, China
1 shared publication Kai Li
College of Ocean Science and Engineering, Shanghai Maritime University, Shanghai, 201306, China
1 shared publicationL. H. Dong
College of Ocean Science and Engineering, Shanghai Maritime University, China
1 shared publicationT. Liu
College of Ocean Science and Engineering, Shanghai Maritime University, China
1 shared publication
Latest Publications
- Open Access
One-Step Removal of Calcium, Magnesium, and Nickel in Desalination by Alcaligenes aquatilis via Biomineralization
In desalination, a high level of calcium (Ca) and magnesium (Mg) ions in seawater can cause scale deposition on the reverse osmosis membranes and water treatment systems. This process can significantly affect the efficiency of desalination. In addition, heavy metals in seawater affect human health. Therefore, Alcaligenes aquatilis from seawater was used to remove Ca, Mg, and nickel (Ni) by microbial-induced carbonate precipitation (MICP). The purification system was then analyzed by ionic analysis and surface characterization. This study shows that the bacteria can utilize amino acids to produce carbonate and form precipitates with a high removal rate. MICP via A. aquatilis removed 91.8%, 68.5%, and 92.2% of the initial soluble Ca, Mg, and Ni, respectively. Furthermore, A. aquatilis can remove ammonium after the MICP process under oxygen-rich conditions. Therefore, we provide interesting insight into the use of Alcaligenes (in the absence of urea) to improve the seawater quality in the process of desalination.
Open AccessOne-Step Removal of Calcium, Magnesium, and Nickel in Desalination by Alcaligenes aquatilis via Biomineralization
In desalination, a high level of calcium (Ca) and magnesium (Mg) ions in seawater can cause scale deposition on the reverse osmosis membranes and water treatment systems. This process can significantly affect the efficiency of desalination. In addition, heavy metals in seawater affect human health. Therefore, Alcaligenes aquatilis from seawater was used to remove Ca, Mg, and nickel (Ni) by microbial-induced carbonate precipitation (MICP). The purification system was then analyzed by ionic analysis and surface characterization. This study shows that the bacteria can utilize amino acids to produce carbonate and form precipitates with a high removal rate. MICP via A. aquatilis removed 91.8%, 68.5%, and 92.2% of the initial soluble Ca, Mg, and Ni, respectively. Furthermore, A. aquatilis can remove ammonium after the MICP process under oxygen-rich conditions. Therefore, we provide interesting insight into the use of Alcaligenes (in the absence of urea) to improve the seawater quality in the process of desalination.
- Open Access
Promoting Barrier Performance and Cathodic Protection of Zinc-Rich Epoxy Primer via Single-Layer Graphene
The effect of single-layer graphene sheets (Gr) on the corrosion protection of zinc-rich epoxy primers (ZRPs) was investigated. Scanning electron microscopy (SEM) with an energy dispersive spectrometer (EDS) were used to characterize morphology and composition of the coatings after immersion for 25 days. The cross-sectional SEM images and X-ray photoelectron spectroscopy (XPS) confirmed that the addition of single-layer graphene facilitated assembling of zinc oxides on the interface between the coating and the steel. The open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) measurements revealed that both the cathodic protection and barrier performance of the ZRP were enhanced after addition of 0.6 wt. % Gr (Gr0.6-ZRP). In addition, the cathodic protection property of the Gr0.6-ZRP was characterized quantitatively by localized electrochemical impedance spectroscopy (LEIS) in the presence of an artificial scratch on the coating. The results demonstrate that moderate amounts of single-layer graphene can significantly improve corrosion resistance of ZRP, due to the barrier protection and cathodic protection effects.
Open AccessPromoting Barrier Performance and Cathodic Protection of Zinc-Rich Epoxy Primer via Single-Layer Graphene
The effect of single-layer graphene sheets (Gr) on the corrosion protection of zinc-rich epoxy primers (ZRPs) was investigated. Scanning electron microscopy (SEM) with an energy dispersive spectrometer (EDS) were used to characterize morphology and composition of the coatings after immersion for 25 days. The cross-sectional SEM images and X-ray photoelectron spectroscopy (XPS) confirmed that the addition of single-layer graphene facilitated assembling of zinc oxides on the interface between the coating and the steel. The open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) measurements revealed that both the cathodic protection and barrier performance of the ZRP were enhanced after addition of 0.6 wt. % Gr (Gr0.6-ZRP). In addition, the cathodic protection property of the Gr0.6-ZRP was characterized quantitatively by localized electrochemical impedance spectroscopy (LEIS) in the presence of an artificial scratch on the coating. The results demonstrate that moderate amounts of single-layer graphene can significantly improve corrosion resistance of ZRP, due to the barrier protection and cathodic protection effects.
- 10 June 2016
- Published by SAGE Publications in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
- Vol. 51 (6) , 455-462
Effect of extracellular polymeric substances isolated fromVibrio natriegenson corrosion of carbon steel in seawater
Extracellular polymeric substances (EPS) are isolated from marine Vibrio natriegens (V. natriegens) by a cation exchange resin method. The influences of EPS concentration and corrosion time on the corrosion of carbon steel in seawater are investigated. The results demonstrate that EPS are capable of forming a protective film on the surface of carbon steel in seawater, which retards the diffusion of dissolved oxygen and inhibits the reduction of oxygen on the cathode. In addition, the efficiency of corrosion inhibition increases with an increase in the amount of added EPS during the initial state (the first 3 days); however, excess EPS (exceeding 300 mg L−1) in seawater significantly accelerates the corrosion of carbon steel over the long term (10 days) due to the binding power of EPS with Fe ions.
- 10 June 2016
- Published by SAGE Publications in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
- Vol. 51 (6) , 455-462
Effect of extracellular polymeric substances isolated fromVibrio natriegenson corrosion of carbon steel in seawater
Extracellular polymeric substances (EPS) are isolated from marine Vibrio natriegens (V. natriegens) by a cation exchange resin method. The influences of EPS concentration and corrosion time on the corrosion of carbon steel in seawater are investigated. The results demonstrate that EPS are capable of forming a protective film on the surface of carbon steel in seawater, which retards the diffusion of dissolved oxygen and inhibits the reduction of oxygen on the cathode. In addition, the efficiency of corrosion inhibition increases with an increase in the amount of added EPS during the initial state (the first 3 days); however, excess EPS (exceeding 300 mg L−1) in seawater significantly accelerates the corrosion of carbon steel over the long term (10 days) due to the binding power of EPS with Fe ions.