Yu Fan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yu Fan has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Yang Wang
Oil & Gas Technology Research Institute, Southwest Oil & Gas Field Company, PetroChina, Chengdu 610017, China
3 shared publications - Jiexiao Ye
Engineering Research Institute of PetroChina Southwest Oil and Gas Field Company, Chengdu 610017, China
2 shared publications - Song Li
Engineering Research Institute of PetroChina Southwest Oil and Gas Field Company, Chengdu 610017, China
2 shared publications - Zefei Lv
Engineering Technology Research Institute of PetroChina Southwest Oil and Gasfield
2 shared publications - Bo Zeng
Shale Gas Research Institute, PetroChina Southwest Oil & Gasfield Company, Chengdu 610051, China
1 shared publication - Changqing Ye
PetroChina Southwest Oil & Gas Field Company Engineering Technology Research Institute Chengdu, Sichuan 610017 , China
1 shared publication
Latest Publications
- Open Access
Comparison of Mathematical and Intelligent Prediction Models of Directional Wellbore Collapse
Given the great burial depth, ancient depositional age, and multi-phase tectonic evolution of deep formations, drilling operations are highly susceptible to wellbore instability. The design and deployment of directional wells further exacerbate this risk, underscoring the need for quantitative risk assessments for directional drilling operations. Based on linear poroelasticity theory, a mechanical model for directional wellbore stability is established to enable wellbore stability evaluation and trajectory optimization design. Furthermore, an intelligent prediction method for collapse pressure is proposed using the XGBoost algorithm. The results indicate that the prediction accuracy of collapse pressure reaches 93%. Under strike-slip in situ stress regimes, wellbore stability is most critical for vertical wells, whereas horizontal and directional wells exhibit lower collapse pressure. The optimal wellbore trajectory is determined to be a horizontal well with an azimuth approximately 36° deviated from the maximum horizontal principal stress direction. The intelligent prediction results show a 98% goodness-of-fit with theoretical calculations, reducing the calculation time from hours to seconds. This study provides a novel approach for wellbore stability analysis and offers a practical tool for the rapid risk assessment of wellbore collapse during directional drilling operations.
Open AccessComparison of Mathematical and Intelligent Prediction Models of Directional Wellbore Collapse
Given the great burial depth, ancient depositional age, and multi-phase tectonic evolution of deep formations, drilling operations are highly susceptible to wellbore instability. The design and deployment of directional wells further exacerbate this risk, underscoring the need for quantitative risk assessments for directional drilling operations. Based on linear poroelasticity theory, a mechanical model for directional wellbore stability is established to enable wellbore stability evaluation and trajectory optimization design. Furthermore, an intelligent prediction method for collapse pressure is proposed using the XGBoost algorithm. The results indicate that the prediction accuracy of collapse pressure reaches 93%. Under strike-slip in situ stress regimes, wellbore stability is most critical for vertical wells, whereas horizontal and directional wells exhibit lower collapse pressure. The optimal wellbore trajectory is determined to be a horizontal well with an azimuth approximately 36° deviated from the maximum horizontal principal stress direction. The intelligent prediction results show a 98% goodness-of-fit with theoretical calculations, reducing the calculation time from hours to seconds. This study provides a novel approach for wellbore stability analysis and offers a practical tool for the rapid risk assessment of wellbore collapse during directional drilling operations.
- Open Access
The Law of Acid Pressure Fracture Propagation in Maokou Formation Carbonate Reservoir in Central Sichuan
The Dolomite reservoir of the Maokou Formation is rich in gas resources in the central Sichuan Basin. Acid fracturing is an important technical means to improve reservoir permeability and productivity. The interaction mode of the dolomite and limestone acid system will affect the effect of reservoir reconstruction. In order to clarify the influence of complex structure on fracture morphology, we explore the fracturing effect of different acid systems. Physical simulation experiments of true triaxial acid fracturing were carried out with two acid systems and downhole full-diameter cores. The experimental results show: (1) After the carbonate rock is subjected to acid fracturing using a “self-generated acid + gel acid” system, the fracture pressure drops significantly by up to 60%. The morphology of the acid-eroded fractures becomes more complex, with an increase in geometric complexity of about 28% compared to a single acid solution system. It is prone to form three-dimensional “spoon” shaped fractures, and the surface of the acid-eroded fractures shows light yellow acid erosion marks. Analysis of the acid erosion marks indicates that the erosion depth on the fracture surface reaches 0.8–1.2 mm, which is deeper than the 0.2 mm erosion depth achieved with a single system. (2) Acid solution is difficult to penetrate randomly distributed calcite veins with a low porosity and permeability structure. When the fracture meets the calcite vein, the penetration rate of acid solution drops sharply to 15–20% of the initial value, resulting in a reduction of about 62% of the acid erosion area in the limestone section behind. And the acid erosion traces in the limestone behind the calcite vein are significantly reduced. The acid erosion cracks are easy to open on the weak surface between dolomite and limestone, causing the fracture to turn. (3) The results of field engineering and experiment are consistent, and injecting authigenic acid first in the process of reservoir reconstruction is helpful to remove pollution. The recovery rate of near-well permeability is more than 85% with pre-generated acid. Reinjection of gelled acid can effectively communicate the natural weak surface and increase the complexity of cracks. The average daily oil production of the completed well was increased from 7.8 m3 to 22.5 m3, and the increase factor reached 2.88.
Open AccessThe Law of Acid Pressure Fracture Propagation in Maokou Formation Carbonate Reservoir in Central Sichuan
The Dolomite reservoir of the Maokou Formation is rich in gas resources in the central Sichuan Basin. Acid fracturing is an important technical means to improve reservoir permeability and productivity. The interaction mode of the dolomite and limestone acid system will affect the effect of reservoir reconstruction. In order to clarify the influence of complex structure on fracture morphology, we explore the fracturing effect of different acid systems. Physical simulation experiments of true triaxial acid fracturing were carried out with two acid systems and downhole full-diameter cores. The experimental results show: (1) After the carbonate rock is subjected to acid fracturing using a “self-generated acid + gel acid” system, the fracture pressure drops significantly by up to 60%. The morphology of the acid-eroded fractures becomes more complex, with an increase in geometric complexity of about 28% compared to a single acid solution system. It is prone to form three-dimensional “spoon” shaped fractures, and the surface of the acid-eroded fractures shows light yellow acid erosion marks. Analysis of the acid erosion marks indicates that the erosion depth on the fracture surface reaches 0.8–1.2 mm, which is deeper than the 0.2 mm erosion depth achieved with a single system. (2) Acid solution is difficult to penetrate randomly distributed calcite veins with a low porosity and permeability structure. When the fracture meets the calcite vein, the penetration rate of acid solution drops sharply to 15–20% of the initial value, resulting in a reduction of about 62% of the acid erosion area in the limestone section behind. And the acid erosion traces in the limestone behind the calcite vein are significantly reduced. The acid erosion cracks are easy to open on the weak surface between dolomite and limestone, causing the fracture to turn. (3) The results of field engineering and experiment are consistent, and injecting authigenic acid first in the process of reservoir reconstruction is helpful to remove pollution. The recovery rate of near-well permeability is more than 85% with pre-generated acid. Reinjection of gelled acid can effectively communicate the natural weak surface and increase the complexity of cracks. The average daily oil production of the completed well was increased from 7.8 m3 to 22.5 m3, and the increase factor reached 2.88.
- Open Access
Intermittent Optimization of Shale Gas Wells Based on Reservoir–Wellbore Coupling
Shale gas, as an important component of unconventional energy, holds enormous potential value in the energy sector. However, due to the complex geological characteristics and fluid flow mechanisms of shale gas reservoirs, its exploitation faces numerous challenges. This study focuses on the optimization of intermittent production methods for shale gas wells in the Changning block. In this study, a dynamic coordination model of formation recharge and wellhead output was established using real-time pressure monitoring and historical production records as key inputs. Based on this, the dimensionless production efficiency index was optimized by finely regulating the switching timing of the wellhead, thus significantly enhancing the cumulative oil production of the well. The conclusions indicate that the optimization methods proposed in this study can effectively guide the production operations of shale gas wells in the Changning block, thereby enhancing production yield and stability. This research contributes practical value to the field by offering theoretical support and practical guidance for shale gas exploitation, addressing technical challenges in the process.
Open AccessIntermittent Optimization of Shale Gas Wells Based on Reservoir–Wellbore Coupling
Shale gas, as an important component of unconventional energy, holds enormous potential value in the energy sector. However, due to the complex geological characteristics and fluid flow mechanisms of shale gas reservoirs, its exploitation faces numerous challenges. This study focuses on the optimization of intermittent production methods for shale gas wells in the Changning block. In this study, a dynamic coordination model of formation recharge and wellhead output was established using real-time pressure monitoring and historical production records as key inputs. Based on this, the dimensionless production efficiency index was optimized by finely regulating the switching timing of the wellhead, thus significantly enhancing the cumulative oil production of the well. The conclusions indicate that the optimization methods proposed in this study can effectively guide the production operations of shale gas wells in the Changning block, thereby enhancing production yield and stability. This research contributes practical value to the field by offering theoretical support and practical guidance for shale gas exploitation, addressing technical challenges in the process.
- Open Access
Simulation and Control Strategies for Longitudinal Propagation of Acid Fracture in a Low-Permeability Reservoir Containing Bottom Water
The reservoir in the Anyue gas field, located in the Sichuan basin of China, belongs to the second member of the Dengying formation and has distinctive geological features. It is characterized by strong heterogeneity, low porosity, low permeability, and locally developed natural fractures. The reservoir space consists primarily of corrosion holes, natural fractures, and similar voids. Moreover, the lower reservoir exhibits high water saturation and a homogeneous bottom-water interface. Since it is a carbonate-based hydrocarbon reservoir with low porosity and permeability, deep acid fracturing has proven to be an efficient method for enhancing individual well production. However, the reconstruction of the second member of the Dengying formation reservoir poses significant challenges. The reservoir contains high-angle natural fractures, small vertical stress differences, and is located in close proximity to the gas–water interface. As a result, it becomes difficult to control the height of the acid break. Improper acid break treatment may easily result in water production affecting gas well production. To explore ways to control the longitudinal extension of acid fractures, 3D numerical models focusing on the initiation and expansion of acid fractures have been developed. This model takes into account geological and engineering factors such as stress differences, acid fracture displacements and scales, and their effects on the longitudinal extension of acid fractures. It was revealed that the pressure difference is the main controlling factor for the acid fracture height, followed by the reservoir thickness, the interlayer thickness, and the viscosity of the working fluid. Technical countermeasures for controlled fracture and high-acid fracturing tailored to different reservoir characteristics have been proposed, and design parameters for controlled fracture and high-acid fracturing can be optimized. By effectively controlling the vertical extension of the acid fracture, it is possible to maximize production from a single well while avoiding interference from the lower water layer. This study provides theoretical guidance for the application of deep-acid-fracturing techniques in low-permeability bottom-water gas reservoirs.
Open AccessSimulation and Control Strategies for Longitudinal Propagation of Acid Fracture in a Low-Permeability Reservoir Containing Bottom Water
The reservoir in the Anyue gas field, located in the Sichuan basin of China, belongs to the second member of the Dengying formation and has distinctive geological features. It is characterized by strong heterogeneity, low porosity, low permeability, and locally developed natural fractures. The reservoir space consists primarily of corrosion holes, natural fractures, and similar voids. Moreover, the lower reservoir exhibits high water saturation and a homogeneous bottom-water interface. Since it is a carbonate-based hydrocarbon reservoir with low porosity and permeability, deep acid fracturing has proven to be an efficient method for enhancing individual well production. However, the reconstruction of the second member of the Dengying formation reservoir poses significant challenges. The reservoir contains high-angle natural fractures, small vertical stress differences, and is located in close proximity to the gas–water interface. As a result, it becomes difficult to control the height of the acid break. Improper acid break treatment may easily result in water production affecting gas well production. To explore ways to control the longitudinal extension of acid fractures, 3D numerical models focusing on the initiation and expansion of acid fractures have been developed. This model takes into account geological and engineering factors such as stress differences, acid fracture displacements and scales, and their effects on the longitudinal extension of acid fractures. It was revealed that the pressure difference is the main controlling factor for the acid fracture height, followed by the reservoir thickness, the interlayer thickness, and the viscosity of the working fluid. Technical countermeasures for controlled fracture and high-acid fracturing tailored to different reservoir characteristics have been proposed, and design parameters for controlled fracture and high-acid fracturing can be optimized. By effectively controlling the vertical extension of the acid fracture, it is possible to maximize production from a single well while avoiding interference from the lower water layer. This study provides theoretical guidance for the application of deep-acid-fracturing techniques in low-permeability bottom-water gas reservoirs.
- Open Access
A New Fracturing Method to Improve Stimulation Effect of Marl Tight Oil Reservoir in Sichuan Basin
China’s argillaceous limestone reservoir has a lot of oil and gas resources, and hydraulic fracturing of the argillaceous limestone reservoir faces many difficulties. The first problem is that the heterogeneity of the argillaceous limestone reservoir is strong, and it is difficult to optimize fracturing parameters. The second problem is that there are a lot of natural fractures in the argillaceous limestone reservoir, which leads to a lot of fracturing fluid loss. The third problem is that the closure pressure of the argillaceous limestone reservoir is high, and the conductivity of fractures decreases rapidly under high closure pressure. The last problem is that the fracture shape of the argillaceous limestone reservoir is complex, and the law of proppant migration is unclear. The main research methods in this paper include reservoir numerical simulation, fluid-loss-reducer performance evaluation, flow conductivity tests and proppant migration visualization. To solve the above problems, this paper establishes the fracturing productivity prediction model of complex lithology reservoirs and defines the optimal hydraulic fracturing parameters of the argillous limestone reservoir in the Sichuan Basin. The 70/140 mesh ceramide was selected as the fluid loss additive after an evaluation of the sealing properties of different mesh ceramides. At the same time, the hydraulic fracture conductivity test is carried out in this paper, and it is confirmed that the fracture conductivity of 70/140 mesh and 40/70 mesh composite particle-size ceramics mixed according to the mass ratio of 5:5 is the highest. When the closure pressure is 40 MPa, the conductivity of a mixture of 70/140 mesh ceramic and 40/70 mesh ceramic is 35.6% higher than that of a mixture of 70/140 mesh ceramic and 30/50 mesh ceramic. The proppant migration visualization device is used to evaluate the morphology of the sand dike formed by the ceramsite, and it is clear that the shape of the sand dike is the best when the mass ratio of 70/140 mesh ceramsite and 40/70 mesh ceramsite is 6:4. The research results achieved a good stimulation effect in the SC1 well. The daily oil production of the SC1 well is 20 t, and the monitoring results of the wide-area electromagnetic method show that the fracturing fracture length of the SC1 well is up to 129 m.
Open AccessA New Fracturing Method to Improve Stimulation Effect of Marl Tight Oil Reservoir in Sichuan Basin
China’s argillaceous limestone reservoir has a lot of oil and gas resources, and hydraulic fracturing of the argillaceous limestone reservoir faces many difficulties. The first problem is that the heterogeneity of the argillaceous limestone reservoir is strong, and it is difficult to optimize fracturing parameters. The second problem is that there are a lot of natural fractures in the argillaceous limestone reservoir, which leads to a lot of fracturing fluid loss. The third problem is that the closure pressure of the argillaceous limestone reservoir is high, and the conductivity of fractures decreases rapidly under high closure pressure. The last problem is that the fracture shape of the argillaceous limestone reservoir is complex, and the law of proppant migration is unclear. The main research methods in this paper include reservoir numerical simulation, fluid-loss-reducer performance evaluation, flow conductivity tests and proppant migration visualization. To solve the above problems, this paper establishes the fracturing productivity prediction model of complex lithology reservoirs and defines the optimal hydraulic fracturing parameters of the argillous limestone reservoir in the Sichuan Basin. The 70/140 mesh ceramide was selected as the fluid loss additive after an evaluation of the sealing properties of different mesh ceramides. At the same time, the hydraulic fracture conductivity test is carried out in this paper, and it is confirmed that the fracture conductivity of 70/140 mesh and 40/70 mesh composite particle-size ceramics mixed according to the mass ratio of 5:5 is the highest. When the closure pressure is 40 MPa, the conductivity of a mixture of 70/140 mesh ceramic and 40/70 mesh ceramic is 35.6% higher than that of a mixture of 70/140 mesh ceramic and 30/50 mesh ceramic. The proppant migration visualization device is used to evaluate the morphology of the sand dike formed by the ceramsite, and it is clear that the shape of the sand dike is the best when the mass ratio of 70/140 mesh ceramsite and 40/70 mesh ceramsite is 6:4. The research results achieved a good stimulation effect in the SC1 well. The daily oil production of the SC1 well is 20 t, and the monitoring results of the wide-area electromagnetic method show that the fracturing fracture length of the SC1 well is up to 129 m.
- Open Access
- 27 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (15) , 8699
An Improved AoT-DCGAN and T-CNN Hybrid Deep Learning Model for Intelligent Diagnosis of PTCs Quality under Small Sample Space
The intelligent diagnosis of premium threaded connections (PTCs) is vital for ensuring the robust and leak-proof performance of tubing under high-temperature, high-pressure, acidic gas conditions. However, achieving accurate diagnostic results necessitates a substantial number of PTCs curves under diverse make-up conditions, presenting considerable challenges in practical industrial detection. In this study, we introduce an end-to-end classification model, which combines an asynchronously optimized two-dimensional deep convolutional generative adversarial network (AoT-DCGAN) and a two-dimensional convolutional neural network (T-CNN), designed to enhance the classification performance under small sample size. Our proposed method first leverages AoT-DCGAN to identify the distribution patterns of the original samples and generate synthetic counterparts. Concurrently, we implement a novel weight optimization strategy, termed asynchronous optimization (AO), to alleviate the issue of gradient vanishing during the generator’s optimization phase. Following this, a novel T-CNN model is devised and trained on the enlarged dataset to automate the classification of PTCs curves. The performance evaluation of our method, based on recall, specificity, F1-score, precision values, and confusion matrices at varying data augmentation ratios, demonstrates that the model’s classification capabilities are enhanced as the dataset size escalates, peaking at a dataset size of 1200. Moreover, given the same training set, the T-CNN model outperforms traditional machine learning and deep learning models, achieving classification accuracies of up to 95.9%, 95.5%, and 96.7% for the AC, ATI, and NDT curves, respectively. Lastly, it was confirmed that applying asynchronous optimization in the DCGAN training process results in a more consistent decline in the loss function.
- 27 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (15) , 8699
Open AccessAn Improved AoT-DCGAN and T-CNN Hybrid Deep Learning Model for Intelligent Diagnosis of PTCs Quality under Small Sample Space
The intelligent diagnosis of premium threaded connections (PTCs) is vital for ensuring the robust and leak-proof performance of tubing under high-temperature, high-pressure, acidic gas conditions. However, achieving accurate diagnostic results necessitates a substantial number of PTCs curves under diverse make-up conditions, presenting considerable challenges in practical industrial detection. In this study, we introduce an end-to-end classification model, which combines an asynchronously optimized two-dimensional deep convolutional generative adversarial network (AoT-DCGAN) and a two-dimensional convolutional neural network (T-CNN), designed to enhance the classification performance under small sample size. Our proposed method first leverages AoT-DCGAN to identify the distribution patterns of the original samples and generate synthetic counterparts. Concurrently, we implement a novel weight optimization strategy, termed asynchronous optimization (AO), to alleviate the issue of gradient vanishing during the generator’s optimization phase. Following this, a novel T-CNN model is devised and trained on the enlarged dataset to automate the classification of PTCs curves. The performance evaluation of our method, based on recall, specificity, F1-score, precision values, and confusion matrices at varying data augmentation ratios, demonstrates that the model’s classification capabilities are enhanced as the dataset size escalates, peaking at a dataset size of 1200. Moreover, given the same training set, the T-CNN model outperforms traditional machine learning and deep learning models, achieving classification accuracies of up to 95.9%, 95.5%, and 96.7% for the AC, ATI, and NDT curves, respectively. Lastly, it was confirmed that applying asynchronous optimization in the DCGAN training process results in a more consistent decline in the loss function.
- Open Access
A New Compound Staged Gelling Acid Fracturing Method for Ultra-Deep Horizontal Wells
Carbonate gas reservoirs in Sichuan are deeply buried, high temperature and strong heterogeneity. Staged acid fracturing is an effective means to improve production. Staged acidizing fracturing of ultra-deep horizontal wells faces the following problems: 1. Strong reservoir heterogeneity leads to the difficulty of fine segmentation; 2. The horizontal well section is long and running too many packers increases the completion risk; 3. Under high temperatures, the reaction speed between acid and rock is rapid and the acid action distance is short; and 4. The fracture conductivity is low under high-closure stress. In view of the above problems, the optimal fracture spacing is determined through productivity simulation. The composite temporary plugging of fibers and particles can increase the plugging layer pressure to 17.9 MPa, which can meet the requirements of the staged acid fracturing of horizontal wells. Through the gelling acid finger characteristic simulation and conductivity test, it is clear that the crosslinked authigenic acid and gelling acid in the Sichuan carbonate gas reservoir are injected alternately in three stages. When the proportion of gelling acid injected into a single section is 75% and the acid strength is 1.6 m3/m, the length and conductivity of acid corrosion fracture are the best. A total of 12 staged acid fracturing horizontal wells have been completed in the Sichuan carbonate gas reservoir, and the production is 2.1 times that of ordinary acid fracturing horizontal wells.
Open AccessA New Compound Staged Gelling Acid Fracturing Method for Ultra-Deep Horizontal Wells
Carbonate gas reservoirs in Sichuan are deeply buried, high temperature and strong heterogeneity. Staged acid fracturing is an effective means to improve production. Staged acidizing fracturing of ultra-deep horizontal wells faces the following problems: 1. Strong reservoir heterogeneity leads to the difficulty of fine segmentation; 2. The horizontal well section is long and running too many packers increases the completion risk; 3. Under high temperatures, the reaction speed between acid and rock is rapid and the acid action distance is short; and 4. The fracture conductivity is low under high-closure stress. In view of the above problems, the optimal fracture spacing is determined through productivity simulation. The composite temporary plugging of fibers and particles can increase the plugging layer pressure to 17.9 MPa, which can meet the requirements of the staged acid fracturing of horizontal wells. Through the gelling acid finger characteristic simulation and conductivity test, it is clear that the crosslinked authigenic acid and gelling acid in the Sichuan carbonate gas reservoir are injected alternately in three stages. When the proportion of gelling acid injected into a single section is 75% and the acid strength is 1.6 m3/m, the length and conductivity of acid corrosion fracture are the best. A total of 12 staged acid fracturing horizontal wells have been completed in the Sichuan carbonate gas reservoir, and the production is 2.1 times that of ordinary acid fracturing horizontal wells.
- 10 February 2020
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 8 (2) , SG21-SG31
Permeability inversion using induced microseismicity: A case study for the Longmaxi shale gas reservoir
We have predicted the flow permeability and its spatial distribution for the Longmaxi shale gas reservoir using microseismicity induced during hydraulic-fracturing stimulation. In the time-of-occurrence versus distance-from-injector plot, we find that microseismic points exhibit a parabolic envelope, which we interpret as a triggering front. This reveals that fluid pressure diffusion is at least one of the underlying mechanisms of microseismicity generation. We derive the large-scale equivalent diffusivity from the triggering front plot and thereafter obtain a 3D diffusivity map of the heterogeneous reservoir by solving an eikonal-like equation suggested previously. During this process, we apply kriging interpolation to increase the density of sparsely distributed microseismic points. The resulting diffusivity ranges between 1.0 and 25.85 m2 s−1 with the peak probability attained at 1.8 m2 s−1, which is consistent with the estimate we obtain from the triggering front analysis. We transform the diffusivity map into a permeability map using three different theories of fluid pressure diffusion in porous media: the seismicity-based reservoir characterization method (SBRC) based on Biot’s theory of poroelasticity, the quasirigid medium approximation (QRMA), and the deformable medium approximation (DMA) based on the de la Cruz-Spanos theory. The permeability according to QRMA is slightly higher than that from SBRC, yet we observe no significant difference. However, these estimates are by one order of magnitude higher compared with the permeability estimate from DMA. Furthermore, the permeability from all three theories is much higher than that from previously reported core sample measurements. We interpret this as the difference between large-scale equivalent and matrix permeability and therefore lend weight to the hypothesis that there exist highly conducting fluid pathways, such as natural fractures.
- 10 February 2020
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 8 (2) , SG21-SG31
Permeability inversion using induced microseismicity: A case study for the Longmaxi shale gas reservoir
We have predicted the flow permeability and its spatial distribution for the Longmaxi shale gas reservoir using microseismicity induced during hydraulic-fracturing stimulation. In the time-of-occurrence versus distance-from-injector plot, we find that microseismic points exhibit a parabolic envelope, which we interpret as a triggering front. This reveals that fluid pressure diffusion is at least one of the underlying mechanisms of microseismicity generation. We derive the large-scale equivalent diffusivity from the triggering front plot and thereafter obtain a 3D diffusivity map of the heterogeneous reservoir by solving an eikonal-like equation suggested previously. During this process, we apply kriging interpolation to increase the density of sparsely distributed microseismic points. The resulting diffusivity ranges between 1.0 and 25.85 m2 s−1 with the peak probability attained at 1.8 m2 s−1, which is consistent with the estimate we obtain from the triggering front analysis. We transform the diffusivity map into a permeability map using three different theories of fluid pressure diffusion in porous media: the seismicity-based reservoir characterization method (SBRC) based on Biot’s theory of poroelasticity, the quasirigid medium approximation (QRMA), and the deformable medium approximation (DMA) based on the de la Cruz-Spanos theory. The permeability according to QRMA is slightly higher than that from SBRC, yet we observe no significant difference. However, these estimates are by one order of magnitude higher compared with the permeability estimate from DMA. Furthermore, the permeability from all three theories is much higher than that from previously reported core sample measurements. We interpret this as the difference between large-scale equivalent and matrix permeability and therefore lend weight to the hypothesis that there exist highly conducting fluid pathways, such as natural fractures.
- Open Access
Numerical Study of Simultaneous Multiple Fracture Propagation in Changning Shale Gas Field
Recently, the Changning shale gas field has been one of the most outstanding shale plays in China for unconventional gas exploitation. Based on the more practical experience of hydraulic fracturing, the economic gas production from this field can be optimized and gradually improved. However, further optimization of the fracture design requires a deeper understanding of the effects of engineering parameters on simultaneous multiple fracture propagation. It can increase the effective fracture number and the well performance. In this paper, based on the Changning field data, a complex fracture propagation model was established. A series of case studies were investigated to analyze the effects of engineering parameters on simultaneous multiple fracture propagation. The fracture spacing, perforating number, injection rate, fluid viscosity and number of fractures within one stage were considered. The simulation results show that smaller fracture spacing implies stronger stress shadow effects, which significantly reduces the perforating efficiency. The perforating number is a critical parameter that has a big impact on the cluster efficiency. In addition, one cluster with a smaller perforating number can more easily generate a uniform fracture geometry. A higher injection rate is better for promoting uniform fluid volume distribution, with each cluster growing more evenly. An increasing fluid viscosity increases the variation of fluid distribution between perforation clusters, resulting in the increasing gap between the interior fracture and outer fractures. An increasing number of fractures within the stage increases the stress shadow among fractures, resulting in a larger total fracture length and a smaller average fracture width. This work provides key guidelines for improving the effectiveness of hydraulic fracture treatments.
Open AccessNumerical Study of Simultaneous Multiple Fracture Propagation in Changning Shale Gas Field
Recently, the Changning shale gas field has been one of the most outstanding shale plays in China for unconventional gas exploitation. Based on the more practical experience of hydraulic fracturing, the economic gas production from this field can be optimized and gradually improved. However, further optimization of the fracture design requires a deeper understanding of the effects of engineering parameters on simultaneous multiple fracture propagation. It can increase the effective fracture number and the well performance. In this paper, based on the Changning field data, a complex fracture propagation model was established. A series of case studies were investigated to analyze the effects of engineering parameters on simultaneous multiple fracture propagation. The fracture spacing, perforating number, injection rate, fluid viscosity and number of fractures within one stage were considered. The simulation results show that smaller fracture spacing implies stronger stress shadow effects, which significantly reduces the perforating efficiency. The perforating number is a critical parameter that has a big impact on the cluster efficiency. In addition, one cluster with a smaller perforating number can more easily generate a uniform fracture geometry. A higher injection rate is better for promoting uniform fluid volume distribution, with each cluster growing more evenly. An increasing fluid viscosity increases the variation of fluid distribution between perforation clusters, resulting in the increasing gap between the interior fracture and outer fractures. An increasing number of fractures within the stage increases the stress shadow among fractures, resulting in a larger total fracture length and a smaller average fracture width. This work provides key guidelines for improving the effectiveness of hydraulic fracture treatments.