Felix Alscher
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Felix Alscher has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Cornelia Breitkopf
Chair of Thermodynamics, Technische Universität Dresden, 01069 Dresden, Germany
2 shared publications - Fabian Nadolny
Institut für Energietechnik, Technische Universität Dresden, 01069 Dresden, Germany
2 shared publications Wladimir Reschetilowski
Institut für Energietechnik, Technische Universität Dresden, 01069 Dresden, Germany
2 shared publications- Angelika Brückner
Leibniz-Institut für Katalyse e.V., Rostock, Germany
1 shared publication Cornelia Breitkopf
Institut für Energietechnik, Technische Universität Dresden, 01069 Dresden, Germany
1 shared publicationEkaterina Borovinskaya
Institut für Energietechnik, Technische Universität Dresden, 01069 Dresden, Germany
1 shared publication
Latest Publications
- 15 June 2021
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 11 (14) , 4732-4740
Oligomerization of n -butenes over Ni/SiO 2 –Al 2 O 3 : influence of support modification by steam-treating
The acidic properties of a selected SiO 2 –Al 2 O 3 support material have been modified by steam-treating to study the influence on the formation of active nickel sites for butene oligomerization.
- 15 June 2021
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 11 (14) , 4732-4740
Oligomerization of n -butenes over Ni/SiO 2 –Al 2 O 3 : influence of support modification by steam-treating
The acidic properties of a selected SiO 2 –Al 2 O 3 support material have been modified by steam-treating to study the influence on the formation of active nickel sites for butene oligomerization.
- Open Access
Systematic Analysis of Materials for Coated Adsorbers for Application in Adsorption Heat Pumps or Refrigeration Systems
Water vapor sorption in salt hydrates is a promising method to realize seasonal solar heat storage. Several of these materials have already shown promising performance for this application. However, a significant bottle neck for applications is the low thermal conductivity. In this study, several fabrication methods of the fixation of salts and their hydrates on metals to overcome the problem are presented. The products are analyzed concerning the hydration states, the corrosion behavior, the chemical compatibility, and the mechanical stability.
Open AccessSystematic Analysis of Materials for Coated Adsorbers for Application in Adsorption Heat Pumps or Refrigeration Systems
Water vapor sorption in salt hydrates is a promising method to realize seasonal solar heat storage. Several of these materials have already shown promising performance for this application. However, a significant bottle neck for applications is the low thermal conductivity. In this study, several fabrication methods of the fixation of salts and their hydrates on metals to overcome the problem are presented. The products are analyzed concerning the hydration states, the corrosion behavior, the chemical compatibility, and the mechanical stability.
- Open Access
Studies on the Binary MgO/SiO2 Mixed Oxide Catalysts for the Conversion of Ethanol to 1,3-Butadiene
The demand for 1,3-butadiene, one of the most important raw materials in the rubber industry, is constantly increasing. The Lebedev process is a classical method of producing 1,3-butadiene from ethanol, which is to be optimized with regard to the mixed oxide catalysts used. In this work, the binary MgO/SiO2 solid system was tested with regard to its optimum chemical composition for the catalytic conversion of ethanol to 1,3-butadiene. Furthermore, novel mesoporous mixed oxides were prepared to investigate their textural, structural, and surface chemical properties as well as the catalytic activity. Nitrogen physisorption, scanning electron microscopy (SEM), and temperature-programmed ammonia desorption (NH3-TPD) measurements were carried out and evaluated. It was shown that the optimum yield of 1,3-butadiene is achieved by using MgO/SiO2 mixed oxide catalysts with 85–95 mol% MgO and not, as suggested by Lebedev, with 75 mol% MgO. The NH3-TPD measurements revealed that the maximum acid-site density is achieved with an equimolar up to magnesium-rich composition. During the synthesis of binary MgO/SiO2 solid systems based on mesoporous MgO, a thermally stable and ordered structure was formed in the autoclave, depending on the carbonate used and on the duration of the treatment.
Open AccessStudies on the Binary MgO/SiO2 Mixed Oxide Catalysts for the Conversion of Ethanol to 1,3-Butadiene
The demand for 1,3-butadiene, one of the most important raw materials in the rubber industry, is constantly increasing. The Lebedev process is a classical method of producing 1,3-butadiene from ethanol, which is to be optimized with regard to the mixed oxide catalysts used. In this work, the binary MgO/SiO2 solid system was tested with regard to its optimum chemical composition for the catalytic conversion of ethanol to 1,3-butadiene. Furthermore, novel mesoporous mixed oxides were prepared to investigate their textural, structural, and surface chemical properties as well as the catalytic activity. Nitrogen physisorption, scanning electron microscopy (SEM), and temperature-programmed ammonia desorption (NH3-TPD) measurements were carried out and evaluated. It was shown that the optimum yield of 1,3-butadiene is achieved by using MgO/SiO2 mixed oxide catalysts with 85–95 mol% MgO and not, as suggested by Lebedev, with 75 mol% MgO. The NH3-TPD measurements revealed that the maximum acid-site density is achieved with an equimolar up to magnesium-rich composition. During the synthesis of binary MgO/SiO2 solid systems based on mesoporous MgO, a thermally stable and ordered structure was formed in the autoclave, depending on the carbonate used and on the duration of the treatment.
- Open Access
Synthesis, Modification, and Characterization of CuO/ZnO/ZrO2 Mixed Metal Oxide Catalysts for CO2/H2 Conversion
CuO/ZnO/ZrO2 catalyst systems were synthesized in different ways and comprehensively characterized in order to study synthesis-to-property relations. A series of catalyst samples was prepared by coprecipitation, one-pot synthesis, and wet impregnation. The coprecipitation of multicomponent precipitates is usually a preliminary stage for preparation of mixed oxide catalysts. Cetyltrimethylammonium bromide (CTAB) was used in the surfactant-supported coprecipitation to improve the structural or textural characteristics of the catalytic samples. In the one-pot synthesis, all necessary components are simultaneously converted by evaporation from solutions into solids. During the wet impregnation, zirconium hydroxide is loaded with metal salts. After thermal treatment, all samples formed pure metal oxide forms, which was confirmed by XRD. The specific surface area of the investigated samples and their porous texture were determined by nitrogen adsorption. The reducibility of metal oxides and the kind of CuO phase was characterized by temperature-programmed reduction (TPR), and the surface acid properties by temperature-programmed ammonia desorption (TPAD). The CuO/ZnO/ZrO2 sample with the highest amount of strong acid sites is characterized by the formation of large CuO particles combined with the worst reducibility so that potentially catalytic active Cu/CuO pairs can be formed. One catalyst system was further characterized by in situ diffuse reflection Fourier transform infrared spectroscopy (DRIFTS) to identify surface intermediate species, which may occur during the conversion of CO2/H2 to methanol.
Open AccessSynthesis, Modification, and Characterization of CuO/ZnO/ZrO2 Mixed Metal Oxide Catalysts for CO2/H2 Conversion
CuO/ZnO/ZrO2 catalyst systems were synthesized in different ways and comprehensively characterized in order to study synthesis-to-property relations. A series of catalyst samples was prepared by coprecipitation, one-pot synthesis, and wet impregnation. The coprecipitation of multicomponent precipitates is usually a preliminary stage for preparation of mixed oxide catalysts. Cetyltrimethylammonium bromide (CTAB) was used in the surfactant-supported coprecipitation to improve the structural or textural characteristics of the catalytic samples. In the one-pot synthesis, all necessary components are simultaneously converted by evaporation from solutions into solids. During the wet impregnation, zirconium hydroxide is loaded with metal salts. After thermal treatment, all samples formed pure metal oxide forms, which was confirmed by XRD. The specific surface area of the investigated samples and their porous texture were determined by nitrogen adsorption. The reducibility of metal oxides and the kind of CuO phase was characterized by temperature-programmed reduction (TPR), and the surface acid properties by temperature-programmed ammonia desorption (TPAD). The CuO/ZnO/ZrO2 sample with the highest amount of strong acid sites is characterized by the formation of large CuO particles combined with the worst reducibility so that potentially catalytic active Cu/CuO pairs can be formed. One catalyst system was further characterized by in situ diffuse reflection Fourier transform infrared spectroscopy (DRIFTS) to identify surface intermediate species, which may occur during the conversion of CO2/H2 to methanol.
- 9 April 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 9 (10) , 2456-2468
Determination of the prevailing n-butenes dimerization mechanism over nickel containing Al-MCM-41/ZSM-5 mixed-phase catalysts
Nickel modified mixed-phase catalysts containing both mesoporous Al-MCM-41 and microporous ZSM-5 phases were synthesized via a one-pot synthesis. By varying the composition of the catalysts, optimum values regarding Si/Al ratio and nickel content for a highly selective dimerization of n-butenes were identified. An interaction of nickel sites with vicinal aluminum or acid sites can be assumed, since a correlation between Ni/(Al + Ni) ratio, catalytic activity and selectivity was found. Novel approaches to evaluate the contribution of the cationic or coordinative reaction mechanism to the overall reaction course are proposed.
- 9 April 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 9 (10) , 2456-2468
Determination of the prevailing n-butenes dimerization mechanism over nickel containing Al-MCM-41/ZSM-5 mixed-phase catalysts
Nickel modified mixed-phase catalysts containing both mesoporous Al-MCM-41 and microporous ZSM-5 phases were synthesized via a one-pot synthesis. By varying the composition of the catalysts, optimum values regarding Si/Al ratio and nickel content for a highly selective dimerization of n-butenes were identified. An interaction of nickel sites with vicinal aluminum or acid sites can be assumed, since a correlation between Ni/(Al + Ni) ratio, catalytic activity and selectivity was found. Novel approaches to evaluate the contribution of the cationic or coordinative reaction mechanism to the overall reaction course are proposed.