Shintaro Kobayashi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Shintaro Kobayashi has a total of 218 co-authors. Here are the top co-authors by number of shared publications:
- Shogo Kawaguchi
Japan Synchrotron Radiation Research Institute (JASRI), Hyogo, Japan
14 shared publications Kazuyoshi Yoshimura
Department of Chemistry, Graduate School of Science, Kyoto University, Kyoto, Japan
13 shared publicationsChishiro Michioka
Department of Chemistry, Graduate School of Science, Kyoto University, Kyoto 606-8502, Japan
12 shared publicationsHiroaki Ueda
Department of Chemistry, Graduate School of Science, Kyoto University, Kyoto 606-8502, Japan
10 shared publicationsHiroshi Sawa
Department of Applied Physics, Graduate School of Engineering, Nagoya University, Nagoya 464-8603, Japan
5 shared publicationsIzumi Umegaki
Muon Science Laboratory, Institute of Materials Structure Science, Tokai, Japan
5 shared publications
Latest Publications
- Open Access
- 31 August 2026
- Published by The Crystallographic Society of Japan in Nihon Kessho Gakkaishi
- Vol. 68 (3) , 138-139
Development of High Temperature Synchrotron Powder Diffraction Techniques using a Near-Infrared Focused Heating Furnace
- 31 August 2026
- Published by The Crystallographic Society of Japan in Nihon Kessho Gakkaishi
- Vol. 68 (3) , 138-139
Open AccessDevelopment of High Temperature Synchrotron Powder Diffraction Techniques using a Near-Infrared Focused Heating Furnace
- Open Access
- 22 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Time-Temperature-Transformation Diagrams to Navigate the Nucleation and Quenchability of Metastable α-Li₃PS4
α-Li₃PS₄ is a promising solid-state electrolyte with the highest ionic conductivity among its polymorphs. However, its formation presents a thermodynamic paradox: the α-phase is the equilibrium phase at high temperature and transforms to the stable γ-Li3PS4 polymorph when cooled to room temperature; however, α-Li3PS4 can be synthesized and quenched in a metastable state via rapid heating at relatively low temperatures. The origin of this synthesizability and anomalous stability has remained elusive. Here, we address this paradox by presenting an experimental and computational time-temperature-transformation (TTT) diagram, constructed from a temperature-size phase diagram and experimental high-time-resolution isothermal measurements. Our density functional theory calculations reveal that at the nanoscale, the α-phase is stabilized by its low surface energy, which drastically lowers its nucleation barrier across a wide temperature range. This size-dependent stabilization is directly visualized using in-situ sub-second synchrotron X-ray diffraction and electron microscopy, capturing the rapid nucleation of nano-sized α-Li3PS4 and its subsequent slow transformation. This work presents a generalizable framework that integrates thermodynamic and kinetic factors for understanding nucleation and phase transformation mechanisms, providing a rational strategy for the targeted synthesis of functional metastable materials.
- 22 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessTime-Temperature-Transformation Diagrams to Navigate the Nucleation and Quenchability of Metastable α-Li₃PS4
α-Li₃PS₄ is a promising solid-state electrolyte with the highest ionic conductivity among its polymorphs. However, its formation presents a thermodynamic paradox: the α-phase is the equilibrium phase at high temperature and transforms to the stable γ-Li3PS4 polymorph when cooled to room temperature; however, α-Li3PS4 can be synthesized and quenched in a metastable state via rapid heating at relatively low temperatures. The origin of this synthesizability and anomalous stability has remained elusive. Here, we address this paradox by presenting an experimental and computational time-temperature-transformation (TTT) diagram, constructed from a temperature-size phase diagram and experimental high-time-resolution isothermal measurements. Our density functional theory calculations reveal that at the nanoscale, the α-phase is stabilized by its low surface energy, which drastically lowers its nucleation barrier across a wide temperature range. This size-dependent stabilization is directly visualized using in-situ sub-second synchrotron X-ray diffraction and electron microscopy, capturing the rapid nucleation of nano-sized α-Li3PS4 and its subsequent slow transformation. This work presents a generalizable framework that integrates thermodynamic and kinetic factors for understanding nucleation and phase transformation mechanisms, providing a rational strategy for the targeted synthesis of functional metastable materials.
- Open Access
- 29 July 2026
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 59 (4) , 1359-1363
Gas-controlled capillary spinner for time-resolved powder X-ray diffraction under dynamic conditions
A gas-controlled capillary spinner was developed for time-resolved powder X-ray diffraction measurements of crystalline materials under controlled atmospheres. This system enables continuous sample rotation with simultaneous gas control by integrating a gas-tight capillary cell, a magnetic fluid rotary feedthrough and a fast-response diaphragm valve, allowing diffraction measurements to be performed in rapidly changing environments. The system performance was evaluated using a standard Si powder sample, revealing that high-speed rotation significantly improves the uniformity of the diffraction peak intensity, with relative fluctuations reduced to −1 even with millisecond-scale measurements. The applicability of the system was demonstrated by time-resolved diffraction measurements of a metal–organic framework during gas adsorption, in which structural changes were successfully tracked and quantitatively analyzed with a time resolution of 50 ms. These findings indicate that the developed system provides a reliable approach for in situ and operando diffraction studies under dynamic gas conditions.
- 29 July 2026
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 59 (4) , 1359-1363
Open AccessGas-controlled capillary spinner for time-resolved powder X-ray diffraction under dynamic conditions
A gas-controlled capillary spinner was developed for time-resolved powder X-ray diffraction measurements of crystalline materials under controlled atmospheres. This system enables continuous sample rotation with simultaneous gas control by integrating a gas-tight capillary cell, a magnetic fluid rotary feedthrough and a fast-response diaphragm valve, allowing diffraction measurements to be performed in rapidly changing environments. The system performance was evaluated using a standard Si powder sample, revealing that high-speed rotation significantly improves the uniformity of the diffraction peak intensity, with relative fluctuations reduced to −1 even with millisecond-scale measurements. The applicability of the system was demonstrated by time-resolved diffraction measurements of a metal–organic framework during gas adsorption, in which structural changes were successfully tracked and quantitatively analyzed with a time resolution of 50 ms. These findings indicate that the developed system provides a reliable approach for in situ and operando diffraction studies under dynamic gas conditions.
- Open Access
- 12 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Demonstration of a Gandolfi-type attachment for fast high-resolution synchrotron XRD of non-ideal specimens
Synchrotron powder X-ray diffraction (PXRD) offers significant advantages in the structural analysis of functional materials and enables the acquisition of high-quality data; however, accurate data collection remains challenging for samples consisting of coarse crystallites or molten samples. Specifically, obtaining reliable PXRD data from samples in their as-solidified or non-pulverized state remains challenging during melting–solidification and crystal grain growth processes, as well as for materials produced by these processes. To mitigate these limitations, a two-axis rotation Gandolfi-type attachment—comprising a 45°-tilted φ -axis and its rotational ω -axis—was developed and implemented on a high-resolution powder diffractometer at SPring-8, which is equipped with fast area detectors. This configuration improved the particle statistics by increasing the number of crystallites satisfying the Bragg condition through two-axis rotation, while also stabilizing the sample position, even for molten samples, owing to the tilted geometry. Specifically, the integration of a high-speed spinner and multiple two-dimensional photon-counting detectors allowed sub-second continuous imaging and frame-by-frame peak separation, facilitating the indexing of PXRD data for complex structures. The analytical capability was evaluated in three case studies, namely the pair distribution function analysis of molten Zn, in situ observations of LiCoO 2 electrode material synthesis in a molten flux, and high-resolution PXRD of mineral crystals within a short timeframe. The results confirmed that the Gandolfi-type attachment improved data quality and reproducibility, thereby enabling reliable measurements even for practical samples with limited availability of fine powders.
- 12 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessDemonstration of a Gandolfi-type attachment for fast high-resolution synchrotron XRD of non-ideal specimens
Synchrotron powder X-ray diffraction (PXRD) offers significant advantages in the structural analysis of functional materials and enables the acquisition of high-quality data; however, accurate data collection remains challenging for samples consisting of coarse crystallites or molten samples. Specifically, obtaining reliable PXRD data from samples in their as-solidified or non-pulverized state remains challenging during melting–solidification and crystal grain growth processes, as well as for materials produced by these processes. To mitigate these limitations, a two-axis rotation Gandolfi-type attachment—comprising a 45°-tilted φ -axis and its rotational ω -axis—was developed and implemented on a high-resolution powder diffractometer at SPring-8, which is equipped with fast area detectors. This configuration improved the particle statistics by increasing the number of crystallites satisfying the Bragg condition through two-axis rotation, while also stabilizing the sample position, even for molten samples, owing to the tilted geometry. Specifically, the integration of a high-speed spinner and multiple two-dimensional photon-counting detectors allowed sub-second continuous imaging and frame-by-frame peak separation, facilitating the indexing of PXRD data for complex structures. The analytical capability was evaluated in three case studies, namely the pair distribution function analysis of molten Zn, in situ observations of LiCoO 2 electrode material synthesis in a molten flux, and high-resolution PXRD of mineral crystals within a short timeframe. The results confirmed that the Gandolfi-type attachment improved data quality and reproducibility, thereby enabling reliable measurements even for practical samples with limited availability of fine powders.
- 1 January 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (1)
Compact high-pressure cell for in situ synchrotron powder x-ray diffraction featuring precise pressure and temperature control and a wide aperture for crystallographic studies under pressures of up to 400 MPa
High-pressure conditions in the megapascal range are critical in industrial material synthesis, food science, and biospheric Earth science. However, in situ measurements for analyzing material behavior under such conditions remains challenging because of the difficulty of precise pressure–temperature control and high-Q-range data acquisition. To overcome these limitations, we developed a compact high-pressure cell for synchrotron x-ray diffraction, enabling crystal structural analysis at pressures up to 400 MPa and temperatures up to 180°C. The cell provides a wide downstream aperture angle of 72°, substantially larger than those of conventional cells, and is optimized for wide-angle diffraction necessary for crystallographic studies. Using water as the pressure medium, the system allows fine pressure adjustments in 0.1 MPa increments via a manual pump, while a pressure transducer enables real-time monitoring without the need for pressure markers. Temperature is controlled with cartridge heaters and monitored by a thermocouple positioned near the sample. Validation experiments using compressibility, phase transitions, and freezing point determination helped confirm the high accuracy of the results, with the absolute errors in the pressure and temperature being below 10 MPa and 1.5°C, respectively. A Rietveld refinement of NaCl diffraction data at 400 MPa yielded low R-factors, confirming the reliability of the cell for crystal structural analysis. Powdered samples were sealed in polyimide tubes or tapes, facilitating rapid and disposable sample exchange while accommodating soluble, hygroscopic, deliquescent, or anaerobic materials. The cell can support hydrostatic and uniaxial compressions by selecting the sample packing method, offering versatility in a single apparatus.
- 1 January 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (1)
Compact high-pressure cell for in situ synchrotron powder x-ray diffraction featuring precise pressure and temperature control and a wide aperture for crystallographic studies under pressures of up to 400 MPa
High-pressure conditions in the megapascal range are critical in industrial material synthesis, food science, and biospheric Earth science. However, in situ measurements for analyzing material behavior under such conditions remains challenging because of the difficulty of precise pressure–temperature control and high-Q-range data acquisition. To overcome these limitations, we developed a compact high-pressure cell for synchrotron x-ray diffraction, enabling crystal structural analysis at pressures up to 400 MPa and temperatures up to 180°C. The cell provides a wide downstream aperture angle of 72°, substantially larger than those of conventional cells, and is optimized for wide-angle diffraction necessary for crystallographic studies. Using water as the pressure medium, the system allows fine pressure adjustments in 0.1 MPa increments via a manual pump, while a pressure transducer enables real-time monitoring without the need for pressure markers. Temperature is controlled with cartridge heaters and monitored by a thermocouple positioned near the sample. Validation experiments using compressibility, phase transitions, and freezing point determination helped confirm the high accuracy of the results, with the absolute errors in the pressure and temperature being below 10 MPa and 1.5°C, respectively. A Rietveld refinement of NaCl diffraction data at 400 MPa yielded low R-factors, confirming the reliability of the cell for crystal structural analysis. Powdered samples were sealed in polyimide tubes or tapes, facilitating rapid and disposable sample exchange while accommodating soluble, hygroscopic, deliquescent, or anaerobic materials. The cell can support hydrostatic and uniaxial compressions by selecting the sample packing method, offering versatility in a single apparatus.
- 1 December 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (22)
Clarifying fluoride-ion conduction of La0.9Ba0.1F2.9 solid electrolyte
Development of fluoride-ion conductors is currently one of the main bottlenecks in realizing fluoride-ion batteries, yet many details regarding the fluoride-ion conduction mechanism hitherto remain unknown. It is well-known that La0.9Ba0.1F2.9 (LBF) has succeeded in significantly improving the ionic conductivity by introducing vacancies into the fluoride-ion sites by substituting part of La in LaF3 (P3¯c1) with Ba. Herein, a conventional solid-state electrolyte LBF (not P3¯c1 as in LaF3 but P63/mmc) was synthesized by traditional solid-state synthesis. An introduction of fluoride vacancies significantly enhanced the fluoride-ion conductivity by approximately two orders of magnitude, compared to that of LaF3, to approximately 10−6 S cm−1 at room temperature. Rietveld analysis of the temperature-dependent synchrotron x-ray diffraction patterns revealed the fluorine site-splitting from F2 along the c axis into two fluorine sites: F2 and F3. The increase in metastable fluorine sites shortens the F–F distance in the crystal structure, which could play the crucial role of fluoride-ion conduction altogether with the fluoride-ion vacancies. This work presents a proposed fluoride-ion conduction mechanism and comprehensive structural analysis, which is expected to play a key role in the understanding of the high fluoride-ion conductivity of this material.
- 1 December 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (22)
Clarifying fluoride-ion conduction of La0.9Ba0.1F2.9 solid electrolyte
Development of fluoride-ion conductors is currently one of the main bottlenecks in realizing fluoride-ion batteries, yet many details regarding the fluoride-ion conduction mechanism hitherto remain unknown. It is well-known that La0.9Ba0.1F2.9 (LBF) has succeeded in significantly improving the ionic conductivity by introducing vacancies into the fluoride-ion sites by substituting part of La in LaF3 (P3¯c1) with Ba. Herein, a conventional solid-state electrolyte LBF (not P3¯c1 as in LaF3 but P63/mmc) was synthesized by traditional solid-state synthesis. An introduction of fluoride vacancies significantly enhanced the fluoride-ion conductivity by approximately two orders of magnitude, compared to that of LaF3, to approximately 10−6 S cm−1 at room temperature. Rietveld analysis of the temperature-dependent synchrotron x-ray diffraction patterns revealed the fluorine site-splitting from F2 along the c axis into two fluorine sites: F2 and F3. The increase in metastable fluorine sites shortens the F–F distance in the crystal structure, which could play the crucial role of fluoride-ion conduction altogether with the fluoride-ion vacancies. This work presents a proposed fluoride-ion conduction mechanism and comprehensive structural analysis, which is expected to play a key role in the understanding of the high fluoride-ion conductivity of this material.
- 26 September 2024
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 53 (39) , 16195-16201
ZnVO 3 : an ilmenite-type vanadium oxide hosting robust V–V dimers
A novel ilmenite-type compound, ZnVO 3 , has been synthesized under a high-pressure condition. This study highlights the presence of V–V dimers and Zn–Zn dimer-like displacements, as well as the remarkable thermal stability of the V–V bond in ZnVO 3 .
- 26 September 2024
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 53 (39) , 16195-16201
ZnVO 3 : an ilmenite-type vanadium oxide hosting robust V–V dimers
A novel ilmenite-type compound, ZnVO 3 , has been synthesized under a high-pressure condition. This study highlights the presence of V–V dimers and Zn–Zn dimer-like displacements, as well as the remarkable thermal stability of the V–V bond in ZnVO 3 .
- 28 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (37) , 25442-25448
Investigating synergistic cooperativity of metal-Brønsted acid site pair in MFI-type zeolites by synchrotron X-ray powder diffraction
Atomistic engineering of active sites with multiple functional motifs has gained significant attention in heterogeneous catalytic science due to their potential synergistic cooperativity. While these catalysts have demonstrated superior performance in various applications, a lack of systematic study hampers the understanding of intricate synergism. In this study, we present a comprehensive investigation into the synergistic cooperativity between a combination of metal sites (M = Fe3+ and Cu2+) and dominant Brønsted acid sites (BASs, X = B, Ga, and Al) in MFI-type zeolites with delicate control over their quantities and respective distribution. By employing two model catalytic reactions that simultaneously utilize the two active motifs in proximity, we examined the cooperativity required to modulate catalytic reactivity. Combined synchrotron X-ray powder diffraction and theoretical evidence revealed the synergism and the respective contribution of the active pairs of metal-BAS within molecular distances.
- 28 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (37) , 25442-25448
Investigating synergistic cooperativity of metal-Brønsted acid site pair in MFI-type zeolites by synchrotron X-ray powder diffraction
Atomistic engineering of active sites with multiple functional motifs has gained significant attention in heterogeneous catalytic science due to their potential synergistic cooperativity. While these catalysts have demonstrated superior performance in various applications, a lack of systematic study hampers the understanding of intricate synergism. In this study, we present a comprehensive investigation into the synergistic cooperativity between a combination of metal sites (M = Fe3+ and Cu2+) and dominant Brønsted acid sites (BASs, X = B, Ga, and Al) in MFI-type zeolites with delicate control over their quantities and respective distribution. By employing two model catalytic reactions that simultaneously utilize the two active motifs in proximity, we examined the cooperativity required to modulate catalytic reactivity. Combined synchrotron X-ray powder diffraction and theoretical evidence revealed the synergism and the respective contribution of the active pairs of metal-BAS within molecular distances.
- Open Access
- 8 August 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (8) , 084403
Cr-Cr distance and magnetism in the phase diagram of triangular lattice antiferromagnets: A systematic comparative study
In this study, we investigate the influence of Cr-Cr distances on the magnetic properties of triangular lattice antiferromagnets through the lens of the recently synthesized Cr compounds , , and . Our comprehensive analysis integrates existing magnetic structure data and new insights from muon spin rotation measurements, revealing a striking mutual influence between strongly correlated electrons and structural degrees of freedom in systems possessing very different magnetic properties despite having the same crystal symmetry. In particular, we delineate how Cr-Cr distances specifically dictate the magnetic behaviors of the triangular lattice antiferromagnets , , and . By crafting phase diagrams based on these distances, we establish a clear correlation between the structural parameters and the magnetic ground states of these materials together with a wide variety of trivalent Cr triangular lattice layered magnets. Our analysis uncovers a transition range for in-plane and out-of-plane Cr-Cr distances that demarcates distinct magnetic behaviors, highlighting the nuanced role of lattice geometry in the spin-lattice interaction and electron correlation dynamics.- 8 August 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (8) , 084403
Open AccessCr-Cr distance and magnetism in the phase diagram of triangular lattice antiferromagnets: A systematic comparative study
In this study, we investigate the influence of Cr-Cr distances on the magnetic properties of triangular lattice antiferromagnets through the lens of the recently synthesized Cr compounds , , and . Our comprehensive analysis integrates existing magnetic structure data and new insights from muon spin rotation measurements, revealing a striking mutual influence between strongly correlated electrons and structural degrees of freedom in systems possessing very different magnetic properties despite having the same crystal symmetry. In particular, we delineate how Cr-Cr distances specifically dictate the magnetic behaviors of the triangular lattice antiferromagnets , , and . By crafting phase diagrams based on these distances, we establish a clear correlation between the structural parameters and the magnetic ground states of these materials together with a wide variety of trivalent Cr triangular lattice layered magnets. Our analysis uncovers a transition range for in-plane and out-of-plane Cr-Cr distances that demarcates distinct magnetic behaviors, highlighting the nuanced role of lattice geometry in the spin-lattice interaction and electron correlation dynamics.