Greice Maria Silva da Conceição
Greice Maria Silva da Conceição has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Marcelo Luiz Lima Brandão
Institute of Technology in Immunobiologicals, Oswaldo Cruz Foundation, Rio de Janeiro 21040-900, Brazil
5 shared publications - Ana Luíza Mattos-Guaraldi
Health Science Center, Institute of Microbiology Paulo de Góes, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil
2 shared publications - Eduardo José Lopes Torres
Laboratório de Helmintologia Romero Lascasas Porto, Departamento de Microbiologia, Imunologia e Parasitologia, Universidade do Estado do Rio de Janeiro, Rio de Janeiro, Brazil
2 shared publications - Eustáquio de Souza Baêta Júnior
Department of Mechanical Engineering, Postgraduate Program in Mechanical Engineering, FEN, University of the State of Rio de Janeiro, Rio de Janeiro, Brazil
2 shared publications - Fabio Aguiar-Alves
Department of Pharmaceutical Sciences, Lloyd L. Gregory School of Pharmacy, Palm Beach Atlantic University, West Palm Beach, USA
2 shared publications - Giorgio Silva-Santana
Health Science Center, Institute of Microbiology Paulo de Góes, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil
2 shared publications
Latest Publications
- Open Access
- 26 August 2026
- Published by Springer Nature in BMC Microbiology
Corynebacterium striatum modulates the population dynamics of wild-type and ΔagrA mutant Staphylococcus aureus in multi-species biofilms
- 26 August 2026
- Published by Springer Nature in BMC Microbiology
Open AccessCorynebacterium striatum modulates the population dynamics of wild-type and ΔagrA mutant Staphylococcus aureus in multi-species biofilms
- 30 July 2026
- Published by Taylor & Francis in Biofouling
- Vol. 42 (8) , 854-887
Corynebacterium striatum modulates the sessile lifestyle of wild-type and Δ srt A mutant Staphylococcus aureus in multi-species biofilms
Corynebacterium striatum and Staphylococcus aureus are Gram-positive bacteria that are part of the commensal microbiota of human skin and mucosal surfaces, widely recognized for their ability to co...
- 30 July 2026
- Published by Taylor & Francis in Biofouling
- Vol. 42 (8) , 854-887
Corynebacterium striatum modulates the sessile lifestyle of wild-type and Δ srt A mutant Staphylococcus aureus in multi-species biofilms
Corynebacterium striatum and Staphylococcus aureus are Gram-positive bacteria that are part of the commensal microbiota of human skin and mucosal surfaces, widely recognized for their ability to co...
- Open Access
Comparison of Statistical Process Control Models for Monitoring the Biological Burden of a Buffer Solution Used as Input to Produce an Attenuated Viral Vaccine
The pharmaceutical industry faces various production challenges. Bioburden control is essential, and appropriate strategies and procedures must be implemented at all stages of production to prevent microbial contamination and comply with regulatory standards. Quality tools can provide important information for data management in production processes. The objective of this study was to compare two types of statistical process control charts (Laney’s U-chart and Bell distribution) in monitoring the bioburden of a buffer solution used as an input to produce an attenuated viral vaccine. Bioburden data for the buffer solution were obtained over a two-year period. The results showed that the analyzed products met the regulatory specifications, as 99% of them presented ≤ 10 colony-forming units (CFU)/100 mL after filtration. Various microorganisms were identified in the buffer solution, including species from the genus Bacillus spp., Micrococcus spp., Kocuria spp., Staphylococcus spp., and Acinetobacter spp. The Bell distribution proved to be statistically more suitable for application in the management of bioburden data for the buffer solution since the limits were closer to the specified value and could more effectively assist in the investigation of process deviations in the production of an attenuated viral vaccine.
Open AccessComparison of Statistical Process Control Models for Monitoring the Biological Burden of a Buffer Solution Used as Input to Produce an Attenuated Viral Vaccine
The pharmaceutical industry faces various production challenges. Bioburden control is essential, and appropriate strategies and procedures must be implemented at all stages of production to prevent microbial contamination and comply with regulatory standards. Quality tools can provide important information for data management in production processes. The objective of this study was to compare two types of statistical process control charts (Laney’s U-chart and Bell distribution) in monitoring the bioburden of a buffer solution used as an input to produce an attenuated viral vaccine. Bioburden data for the buffer solution were obtained over a two-year period. The results showed that the analyzed products met the regulatory specifications, as 99% of them presented ≤ 10 colony-forming units (CFU)/100 mL after filtration. Various microorganisms were identified in the buffer solution, including species from the genus Bacillus spp., Micrococcus spp., Kocuria spp., Staphylococcus spp., and Acinetobacter spp. The Bell distribution proved to be statistically more suitable for application in the management of bioburden data for the buffer solution since the limits were closer to the specified value and could more effectively assist in the investigation of process deviations in the production of an attenuated viral vaccine.
- Open Access
Phenotypical and Molecular Characterization of Acinetobacter baumannii Isolated from Hospitalized Patients During the COVID-19 Pandemic in Brazil
The goal of the present study was to analyze Acinetobacter baumannii strains isolated from hospitalized patients in the period of the COVID-19 pandemic by phenotypic and molecular methods and evaluate their antimicrobial resistance patterns and biofilm production. Forty-seven strains were isolated in 2021–2022 from a hospital in Brazil, and were identified by VITEK®2, MALDI-TOF/MS (VITEK MS® and MALDI Biotyper®), and 16S rRNA sequencing. Fourier-transform infrared (FTIR) spectroscopy was applied for typing and antimicrobial susceptibility testing (AST). In addition, biofilm formation and disinfectant tolerance tests were used. All methods accurately identified all the A. baumannii strains. FTIR typing identified 23 different profiles and 11 clusters, as well as differentiated between the strains from patients with and without COVID-19. Most strains exhibited resistance to the drugs tested, 91.5% of the strains were classified as XDR, 6.4% of the strains were MDR and only 1 strain was classified as non-MDR. Over half of the strains (n = 27, 57.4%) produced biofilms on polystyrene. Sodium hypochlorite (1.0%/15 min) was the best option for effective disinfection. Overall, this study will lay the foundation for further research on effective cleaning protocols for the eradication of A. baumannii biofilms, as well as the use of FTIR for pathogen surveillance in healthcare settings.
Open AccessPhenotypical and Molecular Characterization of Acinetobacter baumannii Isolated from Hospitalized Patients During the COVID-19 Pandemic in Brazil
The goal of the present study was to analyze Acinetobacter baumannii strains isolated from hospitalized patients in the period of the COVID-19 pandemic by phenotypic and molecular methods and evaluate their antimicrobial resistance patterns and biofilm production. Forty-seven strains were isolated in 2021–2022 from a hospital in Brazil, and were identified by VITEK®2, MALDI-TOF/MS (VITEK MS® and MALDI Biotyper®), and 16S rRNA sequencing. Fourier-transform infrared (FTIR) spectroscopy was applied for typing and antimicrobial susceptibility testing (AST). In addition, biofilm formation and disinfectant tolerance tests were used. All methods accurately identified all the A. baumannii strains. FTIR typing identified 23 different profiles and 11 clusters, as well as differentiated between the strains from patients with and without COVID-19. Most strains exhibited resistance to the drugs tested, 91.5% of the strains were classified as XDR, 6.4% of the strains were MDR and only 1 strain was classified as non-MDR. Over half of the strains (n = 27, 57.4%) produced biofilms on polystyrene. Sodium hypochlorite (1.0%/15 min) was the best option for effective disinfection. Overall, this study will lay the foundation for further research on effective cleaning protocols for the eradication of A. baumannii biofilms, as well as the use of FTIR for pathogen surveillance in healthcare settings.
- 28 June 2024
- Published by Parenteral Drug Association, Inc. in PDA Journal of Pharmaceutical Science and Technology
- Vol. 79 (2) , 125-156
Quantitative and Qualitative Evaluation of Microorganism Profile Identified in Bioburden Analysis in a Biopharmaceutical Facility in Brazil: Criteria for Classification and Management of Results
Microbiological contamination may cause microbial proliferation and consequently additional problems for pharmaceutical companies through production stoppage, product contamination, investigations of process deviations, out-of-specification results and product disposal. This is one of the major concerns of the regulatory health agencies. Microbiological load (bioburden) may represent a potential risk for patients if the sterilization process is not effective and/or due to the production of toxins. Although bioburden can be eliminated by terminal sterilization or filtration processes, it is important to monitor the amount and determine the identity and characteristics of the microorganisms present prior to final processing. The application of microorganism identification systems is crucial for identifying the type of contamination, which can be extremely useful for investigating. The aim of this study was to evaluate the profiles of microorganisms identified in bioburden assays from solutions, culture medias, and products (SCP) from a pharmaceutical industry facility. From 2018-2020, a total of 1,078 samples from 857 different lots of SCP were analyzed and isolated microorganisms were identified. A prefiltering step was included after March 2020, in order to reduce the bioburden before sterilizing filtration. Criteria for the definition and management of microorganisms identified were evaluated after an integrative bibliographic review, and three groups were proposed (critical, objectionable, and nonobjectionable microorganisms). For the samples that did not include prefiltering (n=636), 227 (35.7%) presented microbial growth. For those that included prefiltering, before prefiltering (n=221), 60.6% presented microbial growth, and after prefiltering, this value was reduced to 4.1%, which can be attributed to a contamination during the sampling or a wrong filtering. From the samples that presented microbial growth, 678 microorganisms were identified as bacteria and 59 as molds and yeasts. A total of 120 microorganisms (56 and 27 Gram-positive and negative bacteria, respectively, 31 yeasts, and six filamentous molds) could not be identified, and the remaining microorganisms were classified as objectionable (n=507; 82.2%), nonobjectionable (n=103; 16.7%) and critical (n=7; 1.1%). Most of the bioburden species (>80.0%) were considered objectionable microorganisms. A process for classification and management of bioburden analysis results based on a literature review of pathogenic and physiological characteristics of the microorganisms was proposed.
- 28 June 2024
- Published by Parenteral Drug Association, Inc. in PDA Journal of Pharmaceutical Science and Technology
- Vol. 79 (2) , 125-156
Quantitative and Qualitative Evaluation of Microorganism Profile Identified in Bioburden Analysis in a Biopharmaceutical Facility in Brazil: Criteria for Classification and Management of Results
Microbiological contamination may cause microbial proliferation and consequently additional problems for pharmaceutical companies through production stoppage, product contamination, investigations of process deviations, out-of-specification results and product disposal. This is one of the major concerns of the regulatory health agencies. Microbiological load (bioburden) may represent a potential risk for patients if the sterilization process is not effective and/or due to the production of toxins. Although bioburden can be eliminated by terminal sterilization or filtration processes, it is important to monitor the amount and determine the identity and characteristics of the microorganisms present prior to final processing. The application of microorganism identification systems is crucial for identifying the type of contamination, which can be extremely useful for investigating. The aim of this study was to evaluate the profiles of microorganisms identified in bioburden assays from solutions, culture medias, and products (SCP) from a pharmaceutical industry facility. From 2018-2020, a total of 1,078 samples from 857 different lots of SCP were analyzed and isolated microorganisms were identified. A prefiltering step was included after March 2020, in order to reduce the bioburden before sterilizing filtration. Criteria for the definition and management of microorganisms identified were evaluated after an integrative bibliographic review, and three groups were proposed (critical, objectionable, and nonobjectionable microorganisms). For the samples that did not include prefiltering (n=636), 227 (35.7%) presented microbial growth. For those that included prefiltering, before prefiltering (n=221), 60.6% presented microbial growth, and after prefiltering, this value was reduced to 4.1%, which can be attributed to a contamination during the sampling or a wrong filtering. From the samples that presented microbial growth, 678 microorganisms were identified as bacteria and 59 as molds and yeasts. A total of 120 microorganisms (56 and 27 Gram-positive and negative bacteria, respectively, 31 yeasts, and six filamentous molds) could not be identified, and the remaining microorganisms were classified as objectionable (n=507; 82.2%), nonobjectionable (n=103; 16.7%) and critical (n=7; 1.1%). Most of the bioburden species (>80.0%) were considered objectionable microorganisms. A process for classification and management of bioburden analysis results based on a literature review of pathogenic and physiological characteristics of the microorganisms was proposed.
- Open Access
- 22 April 2024
- Published by MDPI AG in Tropical Medicine and Infectious Disease
- Vol. 9 (4) , 91
Comparative Study of Colorimetric In Situ Hybridization and Quantitative Real-Time Polymerase Chain Reaction for Diagnosis of Infection by Leishmania infantum in Dogs in Formalin-Fixed and Paraffin-Embedded Skin
The zoonotic visceral leishmaniasis is caused by the protozoan Leishmania infantum and dogs are reservoirs for this parasite. For the diagnosis of Leishmania at the species level in dogs in formalin-fixed, paraffin-embedded skin (FFPES) samples, colorimetric in situ hybridization (CISH) and quantitative real-time polymerase chain reaction (qPCR) are options, but their sensitivities are not well established. Therefore, the aim of this study was to determine the sensitivity of these two techniques in FFPES for the diagnosis of the L. infantum infection in dogs using culture as the reference standard. The FFPES of 48 dogs with cutaneous infection by L. infantum confirmed by culture and by multilocus enzyme electrophoresis were examined by CISH and qPCR using specific probes for L. infantum. The sensitivities of qPCR, CISH and their combination were, respectively, 77.0%, 58.0% and 83.3%. The sensitivities of qPCR in dogs with and without clinical signs were, respectively, 74.2% and 82.4%. The sensitivities of CISH in dogs with and without clinical signs were, respectively, 61.3% and 52.9%. The CISH and qPCR showed satisfactory sensitivities for the diagnosis of L. infantum in the FFPES of dogs, even in dogs without clinical signs, and their combination increases the sensitivity for this diagnosis.
- 22 April 2024
- Published by MDPI AG in Tropical Medicine and Infectious Disease
- Vol. 9 (4) , 91
Open AccessComparative Study of Colorimetric In Situ Hybridization and Quantitative Real-Time Polymerase Chain Reaction for Diagnosis of Infection by Leishmania infantum in Dogs in Formalin-Fixed and Paraffin-Embedded Skin
The zoonotic visceral leishmaniasis is caused by the protozoan Leishmania infantum and dogs are reservoirs for this parasite. For the diagnosis of Leishmania at the species level in dogs in formalin-fixed, paraffin-embedded skin (FFPES) samples, colorimetric in situ hybridization (CISH) and quantitative real-time polymerase chain reaction (qPCR) are options, but their sensitivities are not well established. Therefore, the aim of this study was to determine the sensitivity of these two techniques in FFPES for the diagnosis of the L. infantum infection in dogs using culture as the reference standard. The FFPES of 48 dogs with cutaneous infection by L. infantum confirmed by culture and by multilocus enzyme electrophoresis were examined by CISH and qPCR using specific probes for L. infantum. The sensitivities of qPCR, CISH and their combination were, respectively, 77.0%, 58.0% and 83.3%. The sensitivities of qPCR in dogs with and without clinical signs were, respectively, 74.2% and 82.4%. The sensitivities of CISH in dogs with and without clinical signs were, respectively, 61.3% and 52.9%. The CISH and qPCR showed satisfactory sensitivities for the diagnosis of L. infantum in the FFPES of dogs, even in dogs without clinical signs, and their combination increases the sensitivity for this diagnosis.
- Open Access
- 8 October 2020
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 130 (5) , 1758-1769
Cytotoxicity profile of Cronobacter species isolated from food and clinical specimens in Brazil
Aims The objective of this study was to evaluate the cytotoxic activity of Cronobacter strains isolated from foods (n=50) and clinical samples (n=6) in Brazil and genotype selected strains (n=18) using multi‐locus sequence typing (MLST). Methods and Results The cytotoxic activity of C. sakazakii (n=29), C. dublinensis (n=13), C. malonaticus (n=6), C. turicensis (n=6), and C. muytjensii (n=2) was screened using Vero, RK13, Hep2c, NCTC clone 929, and BHK‐21 cell lines. Selected Cronobacter strains were assigned to C. sakazakii ST 21, C. turicensis ST 252, C. sakazakii ST 647, and 3 newly assigned STs; C. turicensis STs 738‐740. The maximum death caused by non‐heat treated filtrates was 20.4, 86.2, 47.0, and 84.0%, in Vero, RK13, Hep2c, and NCTC clone 929 cells, respectively. These were caused by C. sakazakii strains C291 and C292 (ST 494) which had been isolated during neonatal Cronobacter meningitis infection, and C110 (ST 395) isolated from flaxseed flour. Thermal treatment (100°C/20 min) significantly reduced the cytotoxicity activity in NCTC clone 929 and Vero cells (p ≤ 2 x 10‐6), but not in RK13 (p = 0.12) and Hep2c (p = 0.85), indicating the cytotoxin(s) were probably proteinaceous. Electron microscopy revealed that cytotoxic compounds from C. sakazakii induced several cell death characteristics, including loss of cell‐cell contact, microvilli reduction and cellular lysis. Autophagic vacuoles and mitochondrial damage were the most common ultrastructural features observed. Conclusions It was concluded that Cronobacter strains, especially C. sakazakii, can produce heat‐labile cytotoxic compounds in cell filtrates. Significance and Impact of Study This study providing insights into the pathogenesis of the Cronobacter genus. Cytotoxins were identified in excreted filtrates of C. sakazakii strains isolated from food and clinical specimens. The presence of Cronobacter strains that can produce cytotoxins in foods can be a potential threat to human health and highlight the need for high levels of hygiene.
- 8 October 2020
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 130 (5) , 1758-1769
Open AccessCytotoxicity profile of Cronobacter species isolated from food and clinical specimens in Brazil
Aims The objective of this study was to evaluate the cytotoxic activity of Cronobacter strains isolated from foods (n=50) and clinical samples (n=6) in Brazil and genotype selected strains (n=18) using multi‐locus sequence typing (MLST). Methods and Results The cytotoxic activity of C. sakazakii (n=29), C. dublinensis (n=13), C. malonaticus (n=6), C. turicensis (n=6), and C. muytjensii (n=2) was screened using Vero, RK13, Hep2c, NCTC clone 929, and BHK‐21 cell lines. Selected Cronobacter strains were assigned to C. sakazakii ST 21, C. turicensis ST 252, C. sakazakii ST 647, and 3 newly assigned STs; C. turicensis STs 738‐740. The maximum death caused by non‐heat treated filtrates was 20.4, 86.2, 47.0, and 84.0%, in Vero, RK13, Hep2c, and NCTC clone 929 cells, respectively. These were caused by C. sakazakii strains C291 and C292 (ST 494) which had been isolated during neonatal Cronobacter meningitis infection, and C110 (ST 395) isolated from flaxseed flour. Thermal treatment (100°C/20 min) significantly reduced the cytotoxicity activity in NCTC clone 929 and Vero cells (p ≤ 2 x 10‐6), but not in RK13 (p = 0.12) and Hep2c (p = 0.85), indicating the cytotoxin(s) were probably proteinaceous. Electron microscopy revealed that cytotoxic compounds from C. sakazakii induced several cell death characteristics, including loss of cell‐cell contact, microvilli reduction and cellular lysis. Autophagic vacuoles and mitochondrial damage were the most common ultrastructural features observed. Conclusions It was concluded that Cronobacter strains, especially C. sakazakii, can produce heat‐labile cytotoxic compounds in cell filtrates. Significance and Impact of Study This study providing insights into the pathogenesis of the Cronobacter genus. Cytotoxins were identified in excreted filtrates of C. sakazakii strains isolated from food and clinical specimens. The presence of Cronobacter strains that can produce cytotoxins in foods can be a potential threat to human health and highlight the need for high levels of hygiene.
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Cadernos de Saude Publica
- Vol. 35 (4) , e00110618
Body construction and health itineraries: a survey among travestis and trans people in Rio de Janeiro, Brazil
The article examines health itineraries followed by Brazilian travestis, trans men and trans women in the affirmation of their gender, based on the survey Trans Uerj: Health and Citizenship of Trans People in Brazil. The survey’s main objectives were to gauge the trans/travesti population’s diversity and sociodemographic profile; and to map the various ways they access their rights as citizens, especially to healthcare services and body modification technologies. Interviewers, mainly trans people and travestis, applied 391 questionnaires in the city of Rio de Janeiro and its metropolitan region to interviewees of different social classes, schooling levels and gender identity configurations, contacted through the interviewers’ social networks. For defining respondents’ gender identities the survey used an original method based on self-definitions, which were then aggregated into 6 categories for data analysis purposes. This article discusses the multiple strategies used by this trans population in gender affirmation processes to gain access to regulated and/or unregulated use of hormones and surgical procedures.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Cadernos de Saude Publica
- Vol. 35 (4) , e00110618
Open AccessBody construction and health itineraries: a survey among travestis and trans people in Rio de Janeiro, Brazil
The article examines health itineraries followed by Brazilian travestis, trans men and trans women in the affirmation of their gender, based on the survey Trans Uerj: Health and Citizenship of Trans People in Brazil. The survey’s main objectives were to gauge the trans/travesti population’s diversity and sociodemographic profile; and to map the various ways they access their rights as citizens, especially to healthcare services and body modification technologies. Interviewers, mainly trans people and travestis, applied 391 questionnaires in the city of Rio de Janeiro and its metropolitan region to interviewees of different social classes, schooling levels and gender identity configurations, contacted through the interviewers’ social networks. For defining respondents’ gender identities the survey used an original method based on self-definitions, which were then aggregated into 6 categories for data analysis purposes. This article discusses the multiple strategies used by this trans population in gender affirmation processes to gain access to regulated and/or unregulated use of hormones and surgical procedures.