Wei Xi
Research Subjects
Wei Xi has a total of 125 co-authors. Here are the top co-authors by number of shared publications:
- Jun Luo
ShenSi Lab, Shenzhen Institute for Advanced Study, University of Electronic Science and Technology of China, Longhua District, Shenzhen 518110, China
9 shared publications - Wenjuan Yuan
School of Materials Science and Engineering
9 shared publications Mengke Ge
Center for Electron Microscopy and Tianjin Key Lab of Advanced Functional Porous Materials Institute for New Energy Materials & Low‐Carbon Technologies School of Materials Science and Engineering Tianjin University of Technology Tianjin 300384 China
6 shared publications- Kai Wang
Lanzhou University
5 shared publications Yongli Shen
Center for Electron Microscopy, Tianjin Key Laboratory of Advanced Functional Porous Materials, Institute for New Energy Materials and Low-Carbon Technologies, School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384, China
5 shared publications- Jia He
School of Chemistry and Chemical Engineering, Tianjin University of Technology, Tianjin 300384, China
4 shared publications
Latest Publications
- 3 June 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (23)
One-step synthesis of self-assembled directed single-atom-thick gold film on semiconductor
Two-dimensional metal thin films have received extensive research attention owing to their distinctive physical and chemical properties. The direct synthesis of highly anisotropic monatomic metal layers is challenging owing to the symmetric non-oriented bonds of metals. In this study, we present a one-step synthesis method for preparing single-atom-thick gold films via high-temperature heating. During substrate synthesis, the surface-hanging bonds anchor the gold atoms individually, resulting in self-assembled loaded monolayer gold films. Density function theory calculations show that gold atoms prefer to anchor along the chain direction, resulting in monolayer films with good homogeneity and stability. The electronic structure of these films is completely different from that of bulk gold. This property may endow the films with potential for applications in magnetism, optics, and catalysis.
- 3 June 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (23)
One-step synthesis of self-assembled directed single-atom-thick gold film on semiconductor
Two-dimensional metal thin films have received extensive research attention owing to their distinctive physical and chemical properties. The direct synthesis of highly anisotropic monatomic metal layers is challenging owing to the symmetric non-oriented bonds of metals. In this study, we present a one-step synthesis method for preparing single-atom-thick gold films via high-temperature heating. During substrate synthesis, the surface-hanging bonds anchor the gold atoms individually, resulting in self-assembled loaded monolayer gold films. Density function theory calculations show that gold atoms prefer to anchor along the chain direction, resulting in monolayer films with good homogeneity and stability. The electronic structure of these films is completely different from that of bulk gold. This property may endow the films with potential for applications in magnetism, optics, and catalysis.
- Open Access
- 26 July 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (33) , 22710-22716
Surface-strain-enhanced oxygen dissociation on gold catalysts
The excellent low-temperature oxidation performance and stability of nanogold catalysts have attracted significant interest. However, the main active source of the low-temperature oxidation of gold remains to be determined. In situ electron microscopy and mass spectrometry results show that nitrogen is oxidized, and the catalyst surface undergoes reconstruction during the process. Strain analysis of the catalyst surface and first-principles calculations show that the tensile strain of the catalyst surface affects the oxidation performance of gold catalysts by enhancing the adsorption ability and dissociation of O2. The newly formed active oxygen atoms on the gold surface act as active sites in the nitrogen oxidation reaction, significantly enhancing the oxidation ability of gold catalysts. This study provides evidence for the dissociation mechanism of oxygen on the gold surface and new design concepts for improving the oxidation activity of gold catalysts and nitrogen activation.
- 26 July 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (33) , 22710-22716
Open AccessSurface-strain-enhanced oxygen dissociation on gold catalysts
The excellent low-temperature oxidation performance and stability of nanogold catalysts have attracted significant interest. However, the main active source of the low-temperature oxidation of gold remains to be determined. In situ electron microscopy and mass spectrometry results show that nitrogen is oxidized, and the catalyst surface undergoes reconstruction during the process. Strain analysis of the catalyst surface and first-principles calculations show that the tensile strain of the catalyst surface affects the oxidation performance of gold catalysts by enhancing the adsorption ability and dissociation of O2. The newly formed active oxygen atoms on the gold surface act as active sites in the nitrogen oxidation reaction, significantly enhancing the oxidation ability of gold catalysts. This study provides evidence for the dissociation mechanism of oxygen on the gold surface and new design concepts for improving the oxidation activity of gold catalysts and nitrogen activation.
- 29 September 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (43) , 18218-18225
Coalescence and shape oscillation of Au nanoparticles in CO2hydrogenation to methanol
During CO2hydrogenation, Au NPs sized ≤5 nm coalesced rapidly, and the coalesced Au NPs oscillated in shape.
- 29 September 2021
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (43) , 18218-18225
Coalescence and shape oscillation of Au nanoparticles in CO2hydrogenation to methanol
During CO2hydrogenation, Au NPs sized ≤5 nm coalesced rapidly, and the coalesced Au NPs oscillated in shape.
- 7 December 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (23) , 233102
Monolayer goldene intercalated in graphene layers
Non-independent metalenes cannot maintain structural stability, but they are expected to possess extraordinary properties that provide excellent prospects for applications in physics, chemistry, and materials science. In this study, a simple physical method is used to prepare a metalene sandwiched between graphene layers. High-resolution transmission electron microscopy observation reveals Au (111) single-layer goldene intercalated with graphene monolayers. Density functional theory calculations indicate that the Au atoms in goldene are stabilized through weak interactions between graphene and Au atoms. The discovery of this structure consisting of single layers of goldene sandwiched between graphene layers suggests ideas for the preparation of such layered materials and opens up the possibilities for their wider application in physics and materials science.
- 7 December 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (23) , 233102
Monolayer goldene intercalated in graphene layers
Non-independent metalenes cannot maintain structural stability, but they are expected to possess extraordinary properties that provide excellent prospects for applications in physics, chemistry, and materials science. In this study, a simple physical method is used to prepare a metalene sandwiched between graphene layers. High-resolution transmission electron microscopy observation reveals Au (111) single-layer goldene intercalated with graphene monolayers. Density functional theory calculations indicate that the Au atoms in goldene are stabilized through weak interactions between graphene and Au atoms. The discovery of this structure consisting of single layers of goldene sandwiched between graphene layers suggests ideas for the preparation of such layered materials and opens up the possibilities for their wider application in physics and materials science.
- 6 October 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 7 (23)
Visualization of Shallow‐Groove Expansion of Au(111) Facet under Methane Pyrolysis
Metallic catalyst facets are considered pivotal in determining the activity and selectivity of heterogeneous catalysis. However, the characterization of the dynamic evolution of metallic catalyst facets remains unsatisfactory, and the identification of evolved facets relies upon phenomenological criteria. Here, to understand the functional mechanism of catalyst facet formation, the dynamic evolution of the Au(111) facet is investigated by in situ transmission electron microscopy during methane pyrolysis. A shallow groove of a few atoms in depth is formed and expanded on the Au(111) facet. Density functional theory results show that the adsorption of carbon weakens the AuAu bonds, facilitating Au atom removal from the surface. Finally, a new flat Au(111) facet is formed. Thus, the facets undergo dynamic evolution during the actual pyrolytic reaction. This research may promote understanding of the catalytic mechanism and guide the design of the next generation of highly efficient catalysts.
- 6 October 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 7 (23)
Visualization of Shallow‐Groove Expansion of Au(111) Facet under Methane Pyrolysis
Metallic catalyst facets are considered pivotal in determining the activity and selectivity of heterogeneous catalysis. However, the characterization of the dynamic evolution of metallic catalyst facets remains unsatisfactory, and the identification of evolved facets relies upon phenomenological criteria. Here, to understand the functional mechanism of catalyst facet formation, the dynamic evolution of the Au(111) facet is investigated by in situ transmission electron microscopy during methane pyrolysis. A shallow groove of a few atoms in depth is formed and expanded on the Au(111) facet. Density functional theory results show that the adsorption of carbon weakens the AuAu bonds, facilitating Au atom removal from the surface. Finally, a new flat Au(111) facet is formed. Thus, the facets undergo dynamic evolution during the actual pyrolytic reaction. This research may promote understanding of the catalytic mechanism and guide the design of the next generation of highly efficient catalysts.
- 10 June 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (27) , 14831-14837
Anomalous detwinning in constrained Cu nanoparticles
In this work, the detwinning process in a 9 nm graphene-constrained Cu nanoparticle was investigated at 1009 °C via in situ high-resolution transmission electron microscopy. Instead of the expected reverse glide of the twinning dislocations, two new twins were formed; the four twin zones rotated synergistically before vanishing. Furthermore, the twin boundary migration energy and the system energy were increased continuously with detwinning. The increased resistance to twin boundary migration in constrained nanoparticles enriches our understanding of the twinning mechanism and may facilitate the design of high-strength and high-ductility nanomaterials.
- 10 June 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (27) , 14831-14837
Anomalous detwinning in constrained Cu nanoparticles
In this work, the detwinning process in a 9 nm graphene-constrained Cu nanoparticle was investigated at 1009 °C via in situ high-resolution transmission electron microscopy. Instead of the expected reverse glide of the twinning dislocations, two new twins were formed; the four twin zones rotated synergistically before vanishing. Furthermore, the twin boundary migration energy and the system energy were increased continuously with detwinning. The increased resistance to twin boundary migration in constrained nanoparticles enriches our understanding of the twinning mechanism and may facilitate the design of high-strength and high-ductility nanomaterials.
- 24 March 2020
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 4 (6) , 2875-2883
Performance enhanced high-nickel lithium metal batteries through stable cathode and anode electrolyte interfaces
The interface stability between the cathode and anode with the electrolyte is the key to the performances of lithium metal batteries (LMBs). An FEC optimized LiTFSI-LiBOB dual salt (Dual-salt + FEC) electrolyte is employed to systematically investigate its effects on LMBs. The high nickel Li‖NCM full LMBs using the Dual-salt + FEC electrolyte present significantly enhanced long-term cycling stability with 83.8% capacity retention after 500 cycles, which is much higher than 65.4% for the LiPF6-based electrolyte. The improvement mechanism has been studied using aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) imaging combined with X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The HAADF-STEM results firstly provide direct evidence at the atomic scale that the corrosion and transition metal dissolution for the high nickel NCM cathode cycled in the Dual-salt + FEC electrolyte could be effectively suppressed. Moreover, the HRTEM and XPS results further disclose that a stable CEI on the cathode and a thinner, smoother and strong adhesion of the SEI on the Li metal anode in the high nickel Li‖NCM cell could be achieved using the Dual-salt + FEC electrolyte. This holistic analysis of the cathode and anode electrolyte interfaces will significantly advance the LMB design principles through manipulation of the electrolyte chemistry.
- 24 March 2020
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 4 (6) , 2875-2883
Performance enhanced high-nickel lithium metal batteries through stable cathode and anode electrolyte interfaces
The interface stability between the cathode and anode with the electrolyte is the key to the performances of lithium metal batteries (LMBs). An FEC optimized LiTFSI-LiBOB dual salt (Dual-salt + FEC) electrolyte is employed to systematically investigate its effects on LMBs. The high nickel Li‖NCM full LMBs using the Dual-salt + FEC electrolyte present significantly enhanced long-term cycling stability with 83.8% capacity retention after 500 cycles, which is much higher than 65.4% for the LiPF6-based electrolyte. The improvement mechanism has been studied using aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) imaging combined with X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The HAADF-STEM results firstly provide direct evidence at the atomic scale that the corrosion and transition metal dissolution for the high nickel NCM cathode cycled in the Dual-salt + FEC electrolyte could be effectively suppressed. Moreover, the HRTEM and XPS results further disclose that a stable CEI on the cathode and a thinner, smoother and strong adhesion of the SEI on the Li metal anode in the high nickel Li‖NCM cell could be achieved using the Dual-salt + FEC electrolyte. This holistic analysis of the cathode and anode electrolyte interfaces will significantly advance the LMB design principles through manipulation of the electrolyte chemistry.
- 17 February 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 7 (7)
Intermediate Structures of Nucleation and Growth during Solidification of CuO Constrained by Graphene
Important solid‐state information regarding solidification remains unknown, such as the intermediate structure before nucleation and precipitation pathways for each component in multicomponent materials during crystal growth. Herein, a unique intermediate structure with unequal lattice structure (the main performance is the curved lattice fringes and the unequal interplanar spacing) is observed in situ at the atomic level before CuO nucleation. The results of experiments and molecular dynamics simulations indicate that the formation of this intermediate may be due to the irregular agglomeration of Cu and O atoms. During growth, Cu–Cu layers repeatedly form at the solid–liquid interface as an intermediate state, then oxidizes, and finally forms a perfect CuO crystal. These results help to reveal the mystery of nucleation nanomaterials, especially the multicomponent materials, and elucidate microscopic crystal growth mechanisms during multicomponent materials solidification.
- 17 February 2020
- Published by Wiley in Advanced Materials Interfaces
- Vol. 7 (7)
Intermediate Structures of Nucleation and Growth during Solidification of CuO Constrained by Graphene
Important solid‐state information regarding solidification remains unknown, such as the intermediate structure before nucleation and precipitation pathways for each component in multicomponent materials during crystal growth. Herein, a unique intermediate structure with unequal lattice structure (the main performance is the curved lattice fringes and the unequal interplanar spacing) is observed in situ at the atomic level before CuO nucleation. The results of experiments and molecular dynamics simulations indicate that the formation of this intermediate may be due to the irregular agglomeration of Cu and O atoms. During growth, Cu–Cu layers repeatedly form at the solid–liquid interface as an intermediate state, then oxidizes, and finally forms a perfect CuO crystal. These results help to reveal the mystery of nucleation nanomaterials, especially the multicomponent materials, and elucidate microscopic crystal growth mechanisms during multicomponent materials solidification.
- Open Access
- 9 December 2019
- Published by Wiley in Angewandte Chemie
- Vol. 131 (51)
Frontispiz: A Supported Nickel Catalyst Stabilized by a Surface Digging Effect for Efficient Methane Oxidation
- 9 December 2019
- Published by Wiley in Angewandte Chemie
- Vol. 131 (51)
Open AccessFrontispiz: A Supported Nickel Catalyst Stabilized by a Surface Digging Effect for Efficient Methane Oxidation
- 17 May 2019
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (21) , 10198-10202
Atomic-scale selectivity of hydrogen for storage sites in Pd nanoparticles at atmospheric pressure
During H2diffusion, H atoms mainly occupy the centers of tetrahedral cages in Pd unit cells; until eventually, in the equilibrium state, they occupy the octahedral cage centers.
- 17 May 2019
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (21) , 10198-10202
Atomic-scale selectivity of hydrogen for storage sites in Pd nanoparticles at atmospheric pressure
During H2diffusion, H atoms mainly occupy the centers of tetrahedral cages in Pd unit cells; until eventually, in the equilibrium state, they occupy the octahedral cage centers.