Qinghua Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Qinghua Yu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Yongliang Li
Birmingham Centre for Energy Storage, School of Chemical Engineering, University of Birmingham, Birmingham, UK
2 shared publications - Bin Huang
Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan 430070, China
1 shared publication Danmei Xie
Wuhan University, 430072 Wuhan, People’s Republic of China
1 shared publicationDong Zhang
Jiangsu Key Laboratory of Process Enhancement and New Energy Equipment Technology, School of Mechanical and Power Engineering, Nanjing Tech University, No. 30 Pu Zhu South Road, Nanjing 211816, People’s Republic of China
1 shared publication- Geng Qiao
Global Energy Interconnection Research Institute Europe GmbH, Kantstraße 162, Berlin 10623, Germany
1 shared publication - Hao Peng
Terahertz Technology and Wireless Communication Research Center, the Yangtze Delta Region Institute (Huzhou) University of Electronic Science and Technology of China Huzhou China
1 shared publication
Latest Publications
- Open Access
Numerical Analysis of Melting Process in a Rectangular Enclosure with Different Fin Locations
Latent thermal energy storage is regarded as an effective strategy to utilize solar energy and recover automotive waste heat. Based upon an enthalpy-porosity method, the influence characteristics and mechanism of fin location on phase change material melting behavior in vertical rectangular enclosures were explored numerically. The results show that as fin location increases, the melting time decreases before attaining the minimum at the fin location of 0.20 after which it increases and finally surpasses the no fin case, because (1) the influence range of fins for conduction is limited by the bottom surface when putting fins next to this surface, (2) the liquid flow resistance increases with moving fins up, and (3) mounting fins near the top surface accelerates melting at the upper part, facilitating thermal stratification formation and weakening natural convection. Nu is higher than the no fin case, i.e., Nu enhancement factor is a positive value, in the melting process for a lower fin location, while for other fin locations, a transition to a negative value takes place. The higher the fin location is, the earlier the transition that arises. Finally, a strategy of increasing the maximum liquid flow velocity is proposed to reinforce melting for cases with considerable natural convection.
Open AccessNumerical Analysis of Melting Process in a Rectangular Enclosure with Different Fin Locations
Latent thermal energy storage is regarded as an effective strategy to utilize solar energy and recover automotive waste heat. Based upon an enthalpy-porosity method, the influence characteristics and mechanism of fin location on phase change material melting behavior in vertical rectangular enclosures were explored numerically. The results show that as fin location increases, the melting time decreases before attaining the minimum at the fin location of 0.20 after which it increases and finally surpasses the no fin case, because (1) the influence range of fins for conduction is limited by the bottom surface when putting fins next to this surface, (2) the liquid flow resistance increases with moving fins up, and (3) mounting fins near the top surface accelerates melting at the upper part, facilitating thermal stratification formation and weakening natural convection. Nu is higher than the no fin case, i.e., Nu enhancement factor is a positive value, in the melting process for a lower fin location, while for other fin locations, a transition to a negative value takes place. The higher the fin location is, the earlier the transition that arises. Finally, a strategy of increasing the maximum liquid flow velocity is proposed to reinforce melting for cases with considerable natural convection.
- 1 July 2019
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Thermophysics and Heat Transfer
- Vol. 33 (3) , 856-864
Impingement Cooling Performance Analysis and Improvement of Synthetic Jets for Electronic Devices
With the development of miniaturization, high power density, and a high degree of integration of electronic devices, heat dissipation has become a major factor constraining its development. As an active flow control technology, synthetic jets can significantly enhance heat transfer and cooling ability. In this paper, an unsteady numerical model of heat transfer is established to explore the impingement cooling performance of synthetic jets. The effect of nozzle-to-surface distance on the cooling performance is analyzed. The results show that the cooling ability of synthetic jets first increases and then decreases with an increasing nozzle-to-surface distance. At small nozzle-to-surface distances, there is a significant recirculation phenomenon of hot air, leading to a notable deterioration of heat transfer and cooling performance. To solve this issue at small nozzle-to-surface distances, a hybrid synthetic jet based on a fluid diode is designed. The further simulation results show that the proposed hybrid...
- 1 July 2019
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Thermophysics and Heat Transfer
- Vol. 33 (3) , 856-864
Impingement Cooling Performance Analysis and Improvement of Synthetic Jets for Electronic Devices
With the development of miniaturization, high power density, and a high degree of integration of electronic devices, heat dissipation has become a major factor constraining its development. As an active flow control technology, synthetic jets can significantly enhance heat transfer and cooling ability. In this paper, an unsteady numerical model of heat transfer is established to explore the impingement cooling performance of synthetic jets. The effect of nozzle-to-surface distance on the cooling performance is analyzed. The results show that the cooling ability of synthetic jets first increases and then decreases with an increasing nozzle-to-surface distance. At small nozzle-to-surface distances, there is a significant recirculation phenomenon of hot air, leading to a notable deterioration of heat transfer and cooling performance. To solve this issue at small nozzle-to-surface distances, a hybrid synthetic jet based on a fluid diode is designed. The further simulation results show that the proposed hybrid...
- 14 May 2019
- Published by Wiley in Journal of Thermal Science and Engineering Applications
- Vol. 11 (6) , 1-23
Effects of an Air Curtain on the Temperature Distribution in Refrigerated Vehicles Under a Hot Climate Condition
Refrigerated vehicle plays an essential role in the cold-chain applications. It directly affects the quality and shelf life of specialized perishable goods. However, the cold energy dissipation caused by natural convection through an open door during partial unloading breaks the isothermal cold environment and notably elevates the air temperature inside the refrigerated container. This temperature rise is harmful to the remaining food. In this study, an air curtain was introduced near the container doorway to attempt to reduce the cold energy dissipation caused by partial unloading. A numerical model was established to explore the effects of the key parameters of the air curtain such as the airflow rate, nozzle width, and jet angle on the air flow and temperature evolution inside the refrigerated container after the door is opened. The numerical results show that the key parameters need to be tailored to form a stable and effective air curtain for preventing the internal cold energy loss or external hot air invasion. An effective and stable air curtain was formed to make the inner air temperature increase only by about 3 °C from the initial temperature of 5 °C after the door was opened, when the jet velocity was set to 2 m/s, the nozzle width was set as 7.5 cm, and the jet angle was set between 0 deg and 15 deg. This work can offer significant guidance for the introduction of an effective air curtain in a refrigerated vehicle to avoid the failure of cold-chain transportation.
- 14 May 2019
- Published by Wiley in Journal of Thermal Science and Engineering Applications
- Vol. 11 (6) , 1-23
Effects of an Air Curtain on the Temperature Distribution in Refrigerated Vehicles Under a Hot Climate Condition
Refrigerated vehicle plays an essential role in the cold-chain applications. It directly affects the quality and shelf life of specialized perishable goods. However, the cold energy dissipation caused by natural convection through an open door during partial unloading breaks the isothermal cold environment and notably elevates the air temperature inside the refrigerated container. This temperature rise is harmful to the remaining food. In this study, an air curtain was introduced near the container doorway to attempt to reduce the cold energy dissipation caused by partial unloading. A numerical model was established to explore the effects of the key parameters of the air curtain such as the airflow rate, nozzle width, and jet angle on the air flow and temperature evolution inside the refrigerated container after the door is opened. The numerical results show that the key parameters need to be tailored to form a stable and effective air curtain for preventing the internal cold energy loss or external hot air invasion. An effective and stable air curtain was formed to make the inner air temperature increase only by about 3 °C from the initial temperature of 5 °C after the door was opened, when the jet velocity was set to 2 m/s, the nozzle width was set as 7.5 cm, and the jet angle was set between 0 deg and 15 deg. This work can offer significant guidance for the introduction of an effective air curtain in a refrigerated vehicle to avoid the failure of cold-chain transportation.
- 30 May 2018
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 32 (7) , 7262-7293
n-Alkanes Phase Change Materials and Their Microencapsulation for Thermal Energy Storage: A Critical Review
- 30 May 2018
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 32 (7) , 7262-7293
n-Alkanes Phase Change Materials and Their Microencapsulation for Thermal Energy Storage: A Critical Review