In-Sun Jung
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
In-Sun Jung has a total of 189 co-authors. Here are the top co-authors by number of shared publications:
- Hyuk Jae Kwon
Air Science Platform, Samsung Advanced Institute of Technology (SAIT), Samsung Electronics Co., LTD, 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16678, Republic of Korea.
4 shared publications - Hyun Chul Lee
Air Science Research Center (ASRC) Samsung Advanced Institute of Technology (SAIT) Samsung Electronics Co., Ltd. 130 Samsung‐ro, Yeongtong‐gu Suwon‐si Gyeonggi‐do 16678 Republic of Korea
4 shared publications - Dongmin Im
Samsung Advanced Institute of Technology (SAIT), Samsung Electronics Co., Ltd, Suwon, Korea
3 shared publications Woo Sung Jeon
Samsung Advanced Institute of Technology, Samsung Electronics Co., Ltd., Yeongtong-gu, Suwon-si, Gyeonggi-do 16678, Republic of Korea
3 shared publicationsChul-Joon Heo
Organic Material Laboratory, Materials Research Center, Samsung Advanced Institute of Technology (SAIT), Samsung Electronics Co., Limited, 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16678, South Korea
2 shared publicationsDong Joon Lee
2 shared publications
Latest Publications
- Open Access
- 10 December 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (3) , 4360-4370
Harnessing Intramolecular Chalcogen–Chalcogen Bonding in Merocyanines for Utilization in High-Efficiency Photon-to-Current Conversion Optoelectronics
A novel series of donor (D)-π-acceptor (A) merocyanine molecules harnessed with intramolecular chalcogen bonding (ChaB) is designed, synthesized, and characterized. ChaB comprises periodic chalcogen atoms, S, Se, and Te, and a neighboring oxygen atom of a carbonyl moiety. Compared to the D-π-A merocyanine dye with nontraditional intramolecular hydrogen bonding, the novel molecules with an intramolecular ChaB exhibit remarkably smaller absorption spectral widths and higher absorption coefficients attributed to their cyanine-like characteristics approaching the resonance parameter (c2) ∼0.5; furthermore, they exhibit better thermal stabilities and electrical charge-carrier transport properties in films. These novel D-π-A merocyanines harnessed with intramolecular ChaB networks are successfully utilized in high-performance color-selective organic photon-to-current conversion optoelectronic devices with excellent thermal stabilities. This study reports that the unique intramolecular ChaB plays an essential role in locking the molecular conformation of merocyanine molecules and enhancing the optical, thermal, and optoelectronic properties of high-performance and high-efficiency organic photon-to-current conversion devices.
- 10 December 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (3) , 4360-4370
Open AccessHarnessing Intramolecular Chalcogen–Chalcogen Bonding in Merocyanines for Utilization in High-Efficiency Photon-to-Current Conversion Optoelectronics
A novel series of donor (D)-π-acceptor (A) merocyanine molecules harnessed with intramolecular chalcogen bonding (ChaB) is designed, synthesized, and characterized. ChaB comprises periodic chalcogen atoms, S, Se, and Te, and a neighboring oxygen atom of a carbonyl moiety. Compared to the D-π-A merocyanine dye with nontraditional intramolecular hydrogen bonding, the novel molecules with an intramolecular ChaB exhibit remarkably smaller absorption spectral widths and higher absorption coefficients attributed to their cyanine-like characteristics approaching the resonance parameter (c2) ∼0.5; furthermore, they exhibit better thermal stabilities and electrical charge-carrier transport properties in films. These novel D-π-A merocyanines harnessed with intramolecular ChaB networks are successfully utilized in high-performance color-selective organic photon-to-current conversion optoelectronic devices with excellent thermal stabilities. This study reports that the unique intramolecular ChaB plays an essential role in locking the molecular conformation of merocyanine molecules and enhancing the optical, thermal, and optoelectronic properties of high-performance and high-efficiency organic photon-to-current conversion devices.
- 9 September 2019
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 116 (39) , 19288-19293
A safe and sustainable bacterial cellulose nanofiber separator for lithium rechargeable batteries
Significance: This report describes an opportunity for the bacterial cellulose nanofiber (BCNF) membrane, which has recently been attracting much attention due to its sustainability and high thermal stability, as a “single-layer,” good alternative membrane to the existing chemical-derived one in batteries, and thus allows us to find possible solutions to the environmental and safety issues. We achieved highest BCNF yield ever reported so far and fabricated a cylindrical lithium ion battery (LIB) by roll-to-roll process to realize remarkable cycle stability with 80% capacity retention even after 1,000 cycles, which is comparable to those of commercialized batteries. Finally, we introduced a Lewis base to improve thermal safety of the battery to a level comparable to that of a commercial ceramic-coated separator.
- 9 September 2019
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 116 (39) , 19288-19293
A safe and sustainable bacterial cellulose nanofiber separator for lithium rechargeable batteries
Significance: This report describes an opportunity for the bacterial cellulose nanofiber (BCNF) membrane, which has recently been attracting much attention due to its sustainability and high thermal stability, as a “single-layer,” good alternative membrane to the existing chemical-derived one in batteries, and thus allows us to find possible solutions to the environmental and safety issues. We achieved highest BCNF yield ever reported so far and fabricated a cylindrical lithium ion battery (LIB) by roll-to-roll process to realize remarkable cycle stability with 80% capacity retention even after 1,000 cycles, which is comparable to those of commercialized batteries. Finally, we introduced a Lewis base to improve thermal safety of the battery to a level comparable to that of a commercial ceramic-coated separator.
- 22 August 2019
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (18) , 25410-25419
Green-light-selective organic photodiodes for full-color imaging
In this work, organic photodiodes (OPDs) based on two newly synthesized p-type dipolar small molecules are reported for application to green-light-selective OPDs. In order to reduce the blue-color absorption induced by the use of C60 as the n-type material in a bulk heterojunction (BHJ), the electron donor:electron acceptor composition ratio is tuned in the BHJ. With this light manipulation approach, the blue-wavelength external quantum efficiency (EQE) is minimized to 18% after reducing the C60 concentration in the center part of the BHJ. The two p-type molecules get a cyanine-like character with intense and sharp absorption in the green color by adjusting the strength of their donating and accepting parts and by choosing a selenophene unit as a π-linker. When combined to C60, the green-wavelength EQE reaches 70% in a complete device composed of two transparent electrodes. Finally, the optical simulation shows the good color-balance performance of hybrid full-color image sensor without an additional filter by using the developed green OPD as the top-layer in stacked device architecture.
- 22 August 2019
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (18) , 25410-25419
Green-light-selective organic photodiodes for full-color imaging
In this work, organic photodiodes (OPDs) based on two newly synthesized p-type dipolar small molecules are reported for application to green-light-selective OPDs. In order to reduce the blue-color absorption induced by the use of C60 as the n-type material in a bulk heterojunction (BHJ), the electron donor:electron acceptor composition ratio is tuned in the BHJ. With this light manipulation approach, the blue-wavelength external quantum efficiency (EQE) is minimized to 18% after reducing the C60 concentration in the center part of the BHJ. The two p-type molecules get a cyanine-like character with intense and sharp absorption in the green color by adjusting the strength of their donating and accepting parts and by choosing a selenophene unit as a π-linker. When combined to C60, the green-wavelength EQE reaches 70% in a complete device composed of two transparent electrodes. Finally, the optical simulation shows the good color-balance performance of hybrid full-color image sensor without an additional filter by using the developed green OPD as the top-layer in stacked device architecture.
- 9 April 2019
- Published by Wiley in ChemSusChem
- Vol. 12 (12) , 2810-2818
Mg‐Ion Inversion in MgO@MgO−Al2O3 Oxides: The Origin of Basic Sites
Although MgO−Al2O3 is well known as having a spinel structure, the inversion of which occurs by exchange of the trivalent (Al3+) and divalent (Mg2+) cations, little analytical study of the degree of inversion has been carried out. This study concerns a simple methodology to identify the inversion by solid‐state NMR spectroscopy, whereby its correlation with the CO2 capture capacity of MgO‐rich MgO@MgO−Al2O3 spinel structures is verified. Through 27Al and 25Mg NMR spectroscopy, temperature‐programmed CO2 desorption, and thermogravimetric analysis, higher inversion is found to occur at low Mg/Al ratios and the inversion is found to decrease as the Mg/Al ratio increases. Moreover, the degree of inversion correlates with CO2 sorption, which is associated with the medium‐strength basic sites induced by formation of the unsaturated O2− species. These results will open new pathways to exploit defects in complex oxides beyond spinels and their derivatives for desired applications. This demonstration of MgO−Al2O3 for CO2 sorption can contribute to the design of future CO2 sorbents.
- 9 April 2019
- Published by Wiley in ChemSusChem
- Vol. 12 (12) , 2810-2818
Mg‐Ion Inversion in MgO@MgO−Al2O3 Oxides: The Origin of Basic Sites
Although MgO−Al2O3 is well known as having a spinel structure, the inversion of which occurs by exchange of the trivalent (Al3+) and divalent (Mg2+) cations, little analytical study of the degree of inversion has been carried out. This study concerns a simple methodology to identify the inversion by solid‐state NMR spectroscopy, whereby its correlation with the CO2 capture capacity of MgO‐rich MgO@MgO−Al2O3 spinel structures is verified. Through 27Al and 25Mg NMR spectroscopy, temperature‐programmed CO2 desorption, and thermogravimetric analysis, higher inversion is found to occur at low Mg/Al ratios and the inversion is found to decrease as the Mg/Al ratio increases. Moreover, the degree of inversion correlates with CO2 sorption, which is associated with the medium‐strength basic sites induced by formation of the unsaturated O2− species. These results will open new pathways to exploit defects in complex oxides beyond spinels and their derivatives for desired applications. This demonstration of MgO−Al2O3 for CO2 sorption can contribute to the design of future CO2 sorbents.
- 23 March 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (17) , 10397-10404
Rapid oxygen diffusive lithium–oxygen batteries using a restacking-inhibited, free-standing graphene cathode film
A graphene-based porous electrode for a lithium–oxygen (Li–O2) battery is investigated for use in next generation energy storage systems. The porosity of the cathode electrode in Li–O2 batteries is a key factor in increasing their oxygen diffusion rate and electrochemical activity, and enables a longer cycle life. In addition, the adsorption behavior of the electrolyte is an important factor for the charging process and diffusion of oxygen. We report the fabrication of a restacking-inhibited film cathode using corrugated and highly porous reduced graphene flakes that have an outstanding capacity and cycle life. We have demonstrated a robust porous cathode film for the next generation Li–O2 batteries, which provides (1) rich voids and spaces for oxygen-related reactions, (2) easy accessibility to the electrolyte and rapid oxygen diffusion. This study can be applied for the design of new solution-processed graphene and the development of Li–O2 battery cathodes.
- 23 March 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (17) , 10397-10404
Rapid oxygen diffusive lithium–oxygen batteries using a restacking-inhibited, free-standing graphene cathode film
A graphene-based porous electrode for a lithium–oxygen (Li–O2) battery is investigated for use in next generation energy storage systems. The porosity of the cathode electrode in Li–O2 batteries is a key factor in increasing their oxygen diffusion rate and electrochemical activity, and enables a longer cycle life. In addition, the adsorption behavior of the electrolyte is an important factor for the charging process and diffusion of oxygen. We report the fabrication of a restacking-inhibited film cathode using corrugated and highly porous reduced graphene flakes that have an outstanding capacity and cycle life. We have demonstrated a robust porous cathode film for the next generation Li–O2 batteries, which provides (1) rich voids and spaces for oxygen-related reactions, (2) easy accessibility to the electrolyte and rapid oxygen diffusion. This study can be applied for the design of new solution-processed graphene and the development of Li–O2 battery cathodes.
- 1 February 2019
- Published by Elsevier in Nano Energy
- Vol. 56, 875-883
Spontaneous pseudo-topological silicon quantization for redesigned Si-based Li-ion batteries
- 1 February 2019
- Published by Elsevier in Nano Energy
- Vol. 56, 875-883
Spontaneous pseudo-topological silicon quantization for redesigned Si-based Li-ion batteries
- 9 March 2018
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 30 (7) , 2236-2244
Synthesis and Electrochemical Properties of I4̅-Type Li1+2xZn1–xPS4 Solid Electrolyte
- 9 March 2018
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 30 (7) , 2236-2244
Synthesis and Electrochemical Properties of I4̅-Type Li1+2xZn1–xPS4 Solid Electrolyte
- Open Access
- 2 February 2018
- Published by Springer Nature in Nature Communications
- Vol. 9 (1) , 1-17
Evolving affinity between Coulombic reversibility and hysteretic phase transformations in nano-structured silicon-based lithium-ion batteries
Nano-structured silicon is an attractive alternative anode material to conventional graphite in lithium-ion batteries. However, the anode designs with higher silicon concentrations remain to be commercialized despite recent remarkable progress. One of the most critical issues is the fundamental understanding of the lithium–silicon Coulombic efficiency. Particularly, this is the key to resolve subtle yet accumulatively significant alterations of Coulombic efficiency by various paths of lithium–silicon processes over cycles. Here, we provide quantitative and qualitative insight into how the irreversible behaviors are altered by the processes under amorphous volume changes and hysteretic amorphous–crystalline phase transformations. Repeated latter transformations over cycles, typically featured as a degradation factor, can govern the reversibility behaviors, improving the irreversibility and eventually minimizing cumulative irreversible lithium consumption. This is clearly different from repeated amorphous volume changes with different lithiation depths. The mechanism behind the correlations is elucidated by electrochemical and structural probing.
- 2 February 2018
- Published by Springer Nature in Nature Communications
- Vol. 9 (1) , 1-17
Open AccessEvolving affinity between Coulombic reversibility and hysteretic phase transformations in nano-structured silicon-based lithium-ion batteries
Nano-structured silicon is an attractive alternative anode material to conventional graphite in lithium-ion batteries. However, the anode designs with higher silicon concentrations remain to be commercialized despite recent remarkable progress. One of the most critical issues is the fundamental understanding of the lithium–silicon Coulombic efficiency. Particularly, this is the key to resolve subtle yet accumulatively significant alterations of Coulombic efficiency by various paths of lithium–silicon processes over cycles. Here, we provide quantitative and qualitative insight into how the irreversible behaviors are altered by the processes under amorphous volume changes and hysteretic amorphous–crystalline phase transformations. Repeated latter transformations over cycles, typically featured as a degradation factor, can govern the reversibility behaviors, improving the irreversibility and eventually minimizing cumulative irreversible lithium consumption. This is clearly different from repeated amorphous volume changes with different lithiation depths. The mechanism behind the correlations is elucidated by electrochemical and structural probing.
- 1 October 2017
- Published by Elsevier in Journal of Power Sources
- Vol. 364, 280-287
Effects of oxygen partial pressure on Li-air battery performance
- 1 October 2017
- Published by Elsevier in Journal of Power Sources
- Vol. 364, 280-287
Effects of oxygen partial pressure on Li-air battery performance
- 10 March 2017
- Published by Wiley in ChemSusChem
- Vol. 10 (8) , 1701-1709
Predictive Guide for Collective CO2 Adsorption Properties of Mg−Al Mixed Oxides
Although solid adsorption processes offer attractive benefits, such as reduced energy demands and penalties compared with liquid absorption processes, there are still pressing needs for solid adsorbents with high adsorption capacities, thermal efficiencies, and energy‐intensive regeneration in gas‐treatment processes. The CO2 adsorption capacities of layered double oxides (LDOs), which are attractive solid adsorbents, have an asymmetric volcano‐type correlation with their relative crystallinities. Furthermore, new collective adsorption properties (adsorption capacity, adsorptive energy and charge‐transfer amount based on the adsorbent weight) are proposed based on density functional theory (DFT) calculations and measured surface areas. The correlation of these collective properties with their crystallinities is in good agreement with the experimentally measured CO2 adsorptive capacity trend, providing a predictive guide for the development of solid adsorbents for gas‐adsorption processes.
- 10 March 2017
- Published by Wiley in ChemSusChem
- Vol. 10 (8) , 1701-1709
Predictive Guide for Collective CO2 Adsorption Properties of Mg−Al Mixed Oxides
Although solid adsorption processes offer attractive benefits, such as reduced energy demands and penalties compared with liquid absorption processes, there are still pressing needs for solid adsorbents with high adsorption capacities, thermal efficiencies, and energy‐intensive regeneration in gas‐treatment processes. The CO2 adsorption capacities of layered double oxides (LDOs), which are attractive solid adsorbents, have an asymmetric volcano‐type correlation with their relative crystallinities. Furthermore, new collective adsorption properties (adsorption capacity, adsorptive energy and charge‐transfer amount based on the adsorbent weight) are proposed based on density functional theory (DFT) calculations and measured surface areas. The correlation of these collective properties with their crystallinities is in good agreement with the experimentally measured CO2 adsorptive capacity trend, providing a predictive guide for the development of solid adsorbents for gas‐adsorption processes.