Hanlin Fu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hanlin Fu has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Nelson Tansu
Department of Electrical and Computer Engineering, Lehigh University, Bethlehem, PA, USA
5 shared publications - Justin C. Goodrich
Center for Photonics and Nanoelectronics, Department of Electrical and Computer Engineering, Lehigh University 1 , Bethlehem, Pennsylvania 18015, USA
4 shared publications Justin C. Goodrich
Center for Photonics and Nanoelectronics, Department of Electrical and Computer Engineering, Lehigh University , Bethlehem, Pennsylvania 18015, USA
2 shared publicationsOnoriode Ogidi-Ekoko
Center for Photonics and Nanoelectronics, Department of Electrical and Computer Engineering, Lehigh University , Bethlehem, Pennsylvania 18015, USA
2 shared publicationsWei Sun
II-VI Inc, Sherman, TX, USA
2 shared publications- Chee-Keong Tan
College of Integrated Circuit Science and Engineering, Nanjing University of Posts and Telecommunications 1 , Nanjing 210023
1 shared publication
Latest Publications
- 14 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 58 (2) , 1-6
Dilute-As InGaNAs/GaN Quantum Wells for High-Efficiency Red Emitters
The dilute-As InGaNAs-based quantum well (QW) active region and the corresponding large-overlap design is analyzed by using a self-consistent 6-band$k\cdot p$ method. Our study evaluates the optical transition energy, ground state electron-hole wavefunction overlap, and optical gain characteristics of a dilute-As InGaNAs QW consisting of a 3.3 nm thick In0.19Ga0.81N0.94As0.06 well and 10 nm thick GaN barriers. The calculation suggests that the In0.19Ga0.81N0.94As0.06 QW may result in a transition wavelength and optical gain comparable to a conventional 3.3 nm thick In0.35Ga0.65N QW, while preserving low In-content (~19%). In addition, a staggered dilute-As InGaNAs QW design with a modulated As-doping profile in the InGaNAs QW is presented, and the calculation results in a significantly enhanced wavefunction overlap and optical gain. This study reveals the excellent potential of the dilute-As InGaNAs semiconductor for application as a high efficiency active region material for future long wavelength emitters.- 14 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 58 (2) , 1-6
Dilute-As InGaNAs/GaN Quantum Wells for High-Efficiency Red Emitters
The dilute-As InGaNAs-based quantum well (QW) active region and the corresponding large-overlap design is analyzed by using a self-consistent 6-band$k\cdot p$ method. Our study evaluates the optical transition energy, ground state electron-hole wavefunction overlap, and optical gain characteristics of a dilute-As InGaNAs QW consisting of a 3.3 nm thick In0.19Ga0.81N0.94As0.06 well and 10 nm thick GaN barriers. The calculation suggests that the In0.19Ga0.81N0.94As0.06 QW may result in a transition wavelength and optical gain comparable to a conventional 3.3 nm thick In0.35Ga0.65N QW, while preserving low In-content (~19%). In addition, a staggered dilute-As InGaNAs QW design with a modulated As-doping profile in the InGaNAs QW is presented, and the calculation results in a significantly enhanced wavefunction overlap and optical gain. This study reveals the excellent potential of the dilute-As InGaNAs semiconductor for application as a high efficiency active region material for future long wavelength emitters.- 16 August 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 119 (7) , 072101
Power electronics figure-of-merit of ScAlN
A power figure-of-merit (FOM) of ∼62.6–87.3 GW/cm2 is predicted for ScAlN, which represents a value 5–7 times larger than that of GaN. The parameters for the lattice-matched Sc0.18Al0.82N FOM calculation are investigated by first-principles density functional theory (DFT) calculations with the local density approximation. An energy gap of 5.65 eV and an electron effective mass of 0.46m0 are obtained from the DFT band structure calculation of Sc0.1875Al0.8125N. The electron mobility of Sc0.18Al0.82N is simulated based on Boltzmann transport equations, which consider scatterings by ionized impurities, dislocations, alloy scattering, acoustic phonons, and optical phonons. The remarkable power FOM shows that lattice-matched Sc0.18Al0.82N possesses a large breakdown voltage and low specific on-resistance, which suggests the great potential for Sc0.18Al0.82N to be implemented in high-voltage power electronics for improved device performance.
- 16 August 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 119 (7) , 072101
Power electronics figure-of-merit of ScAlN
A power figure-of-merit (FOM) of ∼62.6–87.3 GW/cm2 is predicted for ScAlN, which represents a value 5–7 times larger than that of GaN. The parameters for the lattice-matched Sc0.18Al0.82N FOM calculation are investigated by first-principles density functional theory (DFT) calculations with the local density approximation. An energy gap of 5.65 eV and an electron effective mass of 0.46m0 are obtained from the DFT band structure calculation of Sc0.1875Al0.8125N. The electron mobility of Sc0.18Al0.82N is simulated based on Boltzmann transport equations, which consider scatterings by ionized impurities, dislocations, alloy scattering, acoustic phonons, and optical phonons. The remarkable power FOM shows that lattice-matched Sc0.18Al0.82N possesses a large breakdown voltage and low specific on-resistance, which suggests the great potential for Sc0.18Al0.82N to be implemented in high-voltage power electronics for improved device performance.
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11705, 117050F-12
Dilute-As InGaNAs quantum wells for red-emitting laser active regions
The material gain and threshold current density properties of dilute-As InGaNAs-based quantum wells (QWs) are analyzed via a self-consistent 6-band k·p formulism. Amber emission is achieved by the implementation of dilute-As InGaNAs with low In-content. Significant threshold current density reduction and enhanced material gain are obtained by the employment of an In0.19Ga0.81N0.97As0.03 (Eg ~ 2.1 eV) alloy into the active region for red-emitting lasers, compared to a conventional high In-content InGaN-based QW emitting at the same wavelength (λ~600 nm). Our study reveals the excellent potential of the dilute-As InGaNAs for implementation as the active region for red-emitting lasers.
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11705, 117050F-12
Dilute-As InGaNAs quantum wells for red-emitting laser active regions
The material gain and threshold current density properties of dilute-As InGaNAs-based quantum wells (QWs) are analyzed via a self-consistent 6-band k·p formulism. Amber emission is achieved by the implementation of dilute-As InGaNAs with low In-content. Significant threshold current density reduction and enhanced material gain are obtained by the employment of an In0.19Ga0.81N0.97As0.03 (Eg ~ 2.1 eV) alloy into the active region for red-emitting lasers, compared to a conventional high In-content InGaN-based QW emitting at the same wavelength (λ~600 nm). Our study reveals the excellent potential of the dilute-As InGaNAs for implementation as the active region for red-emitting lasers.
- 7 December 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (23) , 231105
Band alignment of ScAlN/GaN heterojunction
The natural band alignments of ScxAl1−xN/GaN heterojunctions, with Sc-contents ranging from 0% to 25%, are investigated by first-principles density functional theory with the local density approximation. Type-I ScxAl1−xN/GaN heterojunctions with large conduction band offsets (CBOs) and valence band offsets (VBOs) are found. The band alignment of nearly lattice-matched ScAlN (x = ∼18.75%) with respect to GaN (CBO = 1.74 eV, VBO = 0.34 eV) is also calculated for future implementation in GaN-based quantum wells and power devices. Our findings provide useful band parameters necessary for enabling the implementation of ScAlN alloys in GaN-based power and optoelectronic devices.
- 7 December 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (23) , 231105
Band alignment of ScAlN/GaN heterojunction
The natural band alignments of ScxAl1−xN/GaN heterojunctions, with Sc-contents ranging from 0% to 25%, are investigated by first-principles density functional theory with the local density approximation. Type-I ScxAl1−xN/GaN heterojunctions with large conduction band offsets (CBOs) and valence band offsets (VBOs) are found. The band alignment of nearly lattice-matched ScAlN (x = ∼18.75%) with respect to GaN (CBO = 1.74 eV, VBO = 0.34 eV) is also calculated for future implementation in GaN-based quantum wells and power devices. Our findings provide useful band parameters necessary for enabling the implementation of ScAlN alloys in GaN-based power and optoelectronic devices.
- Open Access
- 3 October 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 126 (13) , 133103
Type-II AlInN/ZnGeN2 quantum wells for ultraviolet laser diodes
We propose a type-II AlInN/ZnGeN2 quantum well (QW) structure serving as the active region for ultraviolet (UV) laser diodes. A remarkably low threshold current density can be achieved using the type-II AlInN/ZnGeN2 QW structure, providing a pathway for the realization of electrically-driven nitride-based semiconductor UV laser diodes. ZnGeN2 has both a very similar lattice constant and bandgap to GaN. Its large band offsets with GaN enable the potential of serving as a hole confinement layer to increase the electron-hole wavefunction overlap in the active region. In this study, we investigate the spontaneous emission and gain properties of type-II AlInN/ZnGeN2 QWs with different ZnGeN2 layer thicknesses. Our findings show that the use of ZnGeN2 layers in the active region provides a significant improvement in hole carrier confinement, which results in ∼5 times enhancement of the electron-hole wave function overlap. Such an enhancement provides the ability to achieve a significant increase (∼6 times) in the spontaneous emission rate and material gain, along with a remarkable reduction in threshold carrier density compared to the conventional AlGaN-based QW design, which is essential for practical UV laser diodes.
- 3 October 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 126 (13) , 133103
Open AccessType-II AlInN/ZnGeN2 quantum wells for ultraviolet laser diodes
We propose a type-II AlInN/ZnGeN2 quantum well (QW) structure serving as the active region for ultraviolet (UV) laser diodes. A remarkably low threshold current density can be achieved using the type-II AlInN/ZnGeN2 QW structure, providing a pathway for the realization of electrically-driven nitride-based semiconductor UV laser diodes. ZnGeN2 has both a very similar lattice constant and bandgap to GaN. Its large band offsets with GaN enable the potential of serving as a hole confinement layer to increase the electron-hole wavefunction overlap in the active region. In this study, we investigate the spontaneous emission and gain properties of type-II AlInN/ZnGeN2 QWs with different ZnGeN2 layer thicknesses. Our findings show that the use of ZnGeN2 layers in the active region provides a significant improvement in hole carrier confinement, which results in ∼5 times enhancement of the electron-hole wave function overlap. Such an enhancement provides the ability to achieve a significant increase (∼6 times) in the spontaneous emission rate and material gain, along with a remarkable reduction in threshold carrier density compared to the conventional AlGaN-based QW design, which is essential for practical UV laser diodes.
- Open Access
- 1 April 2019
- Published by AIP Publishing in AIP Advances
- Vol. 9 (4) , 045013
Gain characteristics of InGaN quantum wells with AlGaInN barriers
A reduction of the threshold current density of InGaN quantum well (QW) lasers is found from the usage of AlGaInN barriers. Large bandgap and strain-managing AlGaInN barriers surrounding the InGaN quantum wells’ (QWs) active regions are investigated via the 6-band self-consistent k·p formalism for their spontaneous emission, material gain, and threshold current density properties. In this study, quaternary AlGaInN alloys both lattice-matched and tensile-strained to GaN, with bandgaps ranging from 3.4 eV to 5.2 eV, are employed as thin barriers (∼1 nm) surrounding the InGaN active region. The AlGaInN barriers provide strong carrier confinement, which improves the electron and hole wavefunction overlap by ∼25%, while simultaneously reducing the strain relaxation in the active region. This study shows that InGaN QWs surrounded by AlGaInN barriers improve the material gain by ∼30%, reduce the threshold carrier density by ∼18%, and reduce the threshold current density by ∼40% over the conventional InGaN/GaN QW structure. Our results indicate that the AlGaInN barriers substantially enhance the radiative efficiency and reduce the power consumption for light emitting diodes (LEDs) and laser diodes (LDs), making them very attractive candidates for the design of low threshold optoelectronic devices.
- 1 April 2019
- Published by AIP Publishing in AIP Advances
- Vol. 9 (4) , 045013
Open AccessGain characteristics of InGaN quantum wells with AlGaInN barriers
A reduction of the threshold current density of InGaN quantum well (QW) lasers is found from the usage of AlGaInN barriers. Large bandgap and strain-managing AlGaInN barriers surrounding the InGaN quantum wells’ (QWs) active regions are investigated via the 6-band self-consistent k·p formalism for their spontaneous emission, material gain, and threshold current density properties. In this study, quaternary AlGaInN alloys both lattice-matched and tensile-strained to GaN, with bandgaps ranging from 3.4 eV to 5.2 eV, are employed as thin barriers (∼1 nm) surrounding the InGaN active region. The AlGaInN barriers provide strong carrier confinement, which improves the electron and hole wavefunction overlap by ∼25%, while simultaneously reducing the strain relaxation in the active region. This study shows that InGaN QWs surrounded by AlGaInN barriers improve the material gain by ∼30%, reduce the threshold carrier density by ∼18%, and reduce the threshold current density by ∼40% over the conventional InGaN/GaN QW structure. Our results indicate that the AlGaInN barriers substantially enhance the radiative efficiency and reduce the power consumption for light emitting diodes (LEDs) and laser diodes (LDs), making them very attractive candidates for the design of low threshold optoelectronic devices.