Mun Sei Oh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mun Sei Oh has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Anil Kumar Patel
Institute of Aquatic Science and Technology, College of Hydrosphere, National Kaohsiung University of Science and Technology, Kaohsiung City, Taiwan
1 shared publication - Jongjun Lee
Korea District Heating Corp., Gyeonggi-do 17099, Korea
1 shared publication - Jongjun Lee
Frontier Research and Training Institute, Korea Dristrict Heating Corp., Gwanggi-Do, Korea
1 shared publication - Joong Yong Yi
Yujin Energy Consulting Co., Gyeonggi-do 14047, Korea
1 shared publication - Kyung Min Kim
Korea District Heating Corp., Gyeonggi-do 17099, Korea
1 shared publication - Min Eui Hong
Department of Chemical and Biological Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Korea
1 shared publication
Latest Publications
- Open Access
Microalgal-Based Carbon Sequestration by Converting LNG-Fired Waste CO2 into Red Gold Astaxanthin: The Potential Applicability
The combinatorial approach of anthropogenic activities and CO2 sequestration is becoming a global research trend to alleviate the average global temperature. Although microalgae have been widely used to capture CO2 from industrial flue gas, the application of bioproducts was limited to bioenergy due to the controversy over the quality and safety of the products in the food and feed industry. Herein, the waste CO2 emitted from large point sources was directly captured using astaxanthin-hyperproducing microalgae Haematococcus pluvialis. Astaxanthin production was successfully carried out using the hypochlorous acid water-based axenic culture process under highly contamination-prone outdoor conditions. Consequently, after 36 days of autotrophic induction, the productivity of biomass and astaxanthin of H. pluvialis (the mutant) reached 0.127 g L−1 day−1 and 5.47 mg L−1 day−1 under high summer temperatures, respectively, which was 38% and 48% higher than that of wild type cell. After grinding the wet astaxanthin-enriched biomass, the extract was successfully approved by compliance validation testing from Korea Food and Drug Administration. The assorted feed improved an immune system of the poultry without causing any side effects. The flue gas-based bioproducts could certainly be used for health functional food for animals in the future.
Open AccessMicroalgal-Based Carbon Sequestration by Converting LNG-Fired Waste CO2 into Red Gold Astaxanthin: The Potential Applicability
The combinatorial approach of anthropogenic activities and CO2 sequestration is becoming a global research trend to alleviate the average global temperature. Although microalgae have been widely used to capture CO2 from industrial flue gas, the application of bioproducts was limited to bioenergy due to the controversy over the quality and safety of the products in the food and feed industry. Herein, the waste CO2 emitted from large point sources was directly captured using astaxanthin-hyperproducing microalgae Haematococcus pluvialis. Astaxanthin production was successfully carried out using the hypochlorous acid water-based axenic culture process under highly contamination-prone outdoor conditions. Consequently, after 36 days of autotrophic induction, the productivity of biomass and astaxanthin of H. pluvialis (the mutant) reached 0.127 g L−1 day−1 and 5.47 mg L−1 day−1 under high summer temperatures, respectively, which was 38% and 48% higher than that of wild type cell. After grinding the wet astaxanthin-enriched biomass, the extract was successfully approved by compliance validation testing from Korea Food and Drug Administration. The assorted feed improved an immune system of the poultry without causing any side effects. The flue gas-based bioproducts could certainly be used for health functional food for animals in the future.
- Open Access
Exergy Analysis for Utilizing Latent Energy of Thermal Energy Storage System in District Heating
The thermal energy storage (TES) system stores the district heating (DH) water when the heating load is low. Since a TES system stores heat at atmospheric pressure, the DH water temperature of 115 °C has to be lowered to less than 100 °C. Therefore, the temperature drop of the DH water results in thermal loss during storage. In addition, the DH water must have high pressure to supply heat to DH users a long distance from the CHP plant. If heat is to be stored in the TES system, a pressure drop in the throttling valve occurs. These exergy losses, which occur in the thermal storage process of the general TES system, can be analyzed by exergy analysis to identify the location, cause and the amount of loss. This study evaluated the efficiency improvement of a TES system through exergy calculation in the heat storage process. The method involves power generation technology using the organic Rankine cycle (ORC) and a hydraulic turbine. As a result, the 930 kW capacity ORC and the 270 kW capacity hydraulic turbine were considered suitable for a heat storage system that stores 3000 m3/h. In this case, each power generation facility was 50% of the thermal storage capacity, which was attributed to the variation of actual heat storage from the annual operating pattern analysis. Therefore, it was possible to produce 1200 kW of power by recovering the exergy losses. The payback period of the ORC and the hydraulic turbine will be 3.5 and 7.13 years, respectively.
Open AccessExergy Analysis for Utilizing Latent Energy of Thermal Energy Storage System in District Heating
The thermal energy storage (TES) system stores the district heating (DH) water when the heating load is low. Since a TES system stores heat at atmospheric pressure, the DH water temperature of 115 °C has to be lowered to less than 100 °C. Therefore, the temperature drop of the DH water results in thermal loss during storage. In addition, the DH water must have high pressure to supply heat to DH users a long distance from the CHP plant. If heat is to be stored in the TES system, a pressure drop in the throttling valve occurs. These exergy losses, which occur in the thermal storage process of the general TES system, can be analyzed by exergy analysis to identify the location, cause and the amount of loss. This study evaluated the efficiency improvement of a TES system through exergy calculation in the heat storage process. The method involves power generation technology using the organic Rankine cycle (ORC) and a hydraulic turbine. As a result, the 930 kW capacity ORC and the 270 kW capacity hydraulic turbine were considered suitable for a heat storage system that stores 3000 m3/h. In this case, each power generation facility was 50% of the thermal storage capacity, which was attributed to the variation of actual heat storage from the annual operating pattern analysis. Therefore, it was possible to produce 1200 kW of power by recovering the exergy losses. The payback period of the ORC and the hydraulic turbine will be 3.5 and 7.13 years, respectively.