Jakub Lukasz Nowak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jakub Lukasz Nowak has a total of 549 co-authors. Here are the top co-authors by number of shared publications:
- Szymon Piotr Malinowski
Institute of Geophysics, Faculty of Physics, University of Warsaw, Warsaw, Poland
43 shared publications - Bjorn Stevens
Max Planck Institute for Meteorology, Hamburg, Germany
13 shared publications Holger Siebert
13 shared publicationsKai-Erik Szodry
11 shared publicationsMarie Lothon
Laboratoire d'Aérologie, University of Toulouse, CNRS, UPS, Toulouse, France
11 shared publications- Donald H. Lenschow
National Science Foundation National Center for Atmospheric Research, Boulder, CO, USA
10 shared publications
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Some implications of simulating the Earth System
The capability to simulate, rather than model the Earth System, implies the use of solvers applied to equations that generalize to other situations. For instance, km-scale storm resolving models solve the same equations as used in LES of the marine boundary layer at much higher resolution, the dynamics of a buoyant thermal, or the interaction of flow with topographic features. By limiting the use of models (parameterization) to the non-fluid component, e.g., photons or droplets, rather than a part of the flow that is artificially severed from the rest, e.g., convection, scale separation can be better enforced, and the ensuant models can be put on a better theoretical footing. This approach results in more physical models grounded in assumptions that are countably small, often separable, and more directly comparable to observations. That creates new opportunities to test the ability of the models to represent constituent processes within the Earth system, and a new basis for developing physical understanding. This leads to new scientific opportunities which we highlight by reviewing the diversity of configurations being applied, the problems they are solving, and the benefits being derived from their compatibility with advanced observations — including those from an emerging and a promised new generation of active satellite remote sensing.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessSome implications of simulating the Earth System
The capability to simulate, rather than model the Earth System, implies the use of solvers applied to equations that generalize to other situations. For instance, km-scale storm resolving models solve the same equations as used in LES of the marine boundary layer at much higher resolution, the dynamics of a buoyant thermal, or the interaction of flow with topographic features. By limiting the use of models (parameterization) to the non-fluid component, e.g., photons or droplets, rather than a part of the flow that is artificially severed from the rest, e.g., convection, scale separation can be better enforced, and the ensuant models can be put on a better theoretical footing. This approach results in more physical models grounded in assumptions that are countably small, often separable, and more directly comparable to observations. That creates new opportunities to test the ability of the models to represent constituent processes within the Earth system, and a new basis for developing physical understanding. This leads to new scientific opportunities which we highlight by reviewing the diversity of configurations being applied, the problems they are solving, and the benefits being derived from their compatibility with advanced observations — including those from an emerging and a promised new generation of active satellite remote sensing.
- Open Access
- 23 October 2025
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 18 (20) , 7735-7761
nextGEMS: entering the era of kilometer-scale Earth system modeling
The Next Generation of Earth Modeling Systems (nextGEMS) project aimed to produce multidecadal climate simulations, for the first time, with resolved kilometer-scale (km-scale) processes in the ocean, land, and atmosphere. In only 3 years, nextGEMS achieved this milestone with the two km-scale Earth system models, ICOsahedral Non-hydrostatic model (ICON) and Integrated Forecasting System coupled to the Finite-volumE Sea ice-Ocean Model (IFS-FESOM). nextGEMS was based on three cornerstones: (1) developing km-scale Earth system models with small errors in the energy and water balance, (2) performing km-scale climate simulations with a throughput greater than 1 simulated year per day, and (3) facilitating new workflows for an efficient analysis of the large simulations with common data structures and output variables. These cornerstones shaped the timeline of nextGEMS, divided into four cycles. Each cycle marked the release of a new configuration of ICON and IFS-FESOM, which were evaluated at hackathons. The hackathon participants included experts from climate science, software engineering, and high-performance computing as well as users from the energy and agricultural sectors. The continuous efforts over the four cycles allowed us to produce 30-year simulations with ICON and IFS-FESOM, spanning the period 2020–2049 under the SSP3-7.0 scenario. The throughput was about 500 simulated days per day on the Levante supercomputer of the German Climate Computing Center (DKRZ). The simulations employed a horizontal grid of about 5 km resolution in the ocean and 10 km resolution in the atmosphere and land. Aside from this technical achievement, the simulations allowed us to gain new insights into the realism of ICON and IFS-FESOM. Beyond its time frame, nextGEMS builds the foundation of the Climate Change Adaptation Digital Twin developed in the Destination Earth initiative and paves the way for future European research on climate change.
- 23 October 2025
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 18 (20) , 7735-7761
Open AccessnextGEMS: entering the era of kilometer-scale Earth system modeling
The Next Generation of Earth Modeling Systems (nextGEMS) project aimed to produce multidecadal climate simulations, for the first time, with resolved kilometer-scale (km-scale) processes in the ocean, land, and atmosphere. In only 3 years, nextGEMS achieved this milestone with the two km-scale Earth system models, ICOsahedral Non-hydrostatic model (ICON) and Integrated Forecasting System coupled to the Finite-volumE Sea ice-Ocean Model (IFS-FESOM). nextGEMS was based on three cornerstones: (1) developing km-scale Earth system models with small errors in the energy and water balance, (2) performing km-scale climate simulations with a throughput greater than 1 simulated year per day, and (3) facilitating new workflows for an efficient analysis of the large simulations with common data structures and output variables. These cornerstones shaped the timeline of nextGEMS, divided into four cycles. Each cycle marked the release of a new configuration of ICON and IFS-FESOM, which were evaluated at hackathons. The hackathon participants included experts from climate science, software engineering, and high-performance computing as well as users from the energy and agricultural sectors. The continuous efforts over the four cycles allowed us to produce 30-year simulations with ICON and IFS-FESOM, spanning the period 2020–2049 under the SSP3-7.0 scenario. The throughput was about 500 simulated days per day on the Levante supercomputer of the German Climate Computing Center (DKRZ). The simulations employed a horizontal grid of about 5 km resolution in the ocean and 10 km resolution in the atmosphere and land. Aside from this technical achievement, the simulations allowed us to gain new insights into the realism of ICON and IFS-FESOM. Beyond its time frame, nextGEMS builds the foundation of the Climate Change Adaptation Digital Twin developed in the Destination Earth initiative and paves the way for future European research on climate change.
- Open Access
- 20 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-39
Comment on egusphere-2025-509
The Next Generation of Earth Modeling Systems (nextGEMS) project aimed to produce multi-decadal climate simulations, for the first time, with resolved kilometer-scale (km-scale) processes in the ocean, land, and atmosphere. In only three years, nextGEMS achieved this milestone with the two km-scale Earth system models, ICOsahedral Non-hydrostatic model (ICON) and Integrated Forecasting System coupled to the Finite-volumE Sea ice-Ocean Model (IFS-FESOM). nextGEMS was based on three cornerstones: 1) developing km-scale Earth system models with small errors in the energy and water balance, 2) performing km-scale climate simulations with a throughput greater than one simulated year per day, and 3) facilitating new workflows for an efficient analysis of the large simulations with common data structures and output variables. These cornerstones shaped the timeline of nextGEMS, divided into four cycles. Each cycle marked the release of a new configuration of ICON and IFS-FESOM, which were evaluated at hackathons. The participants in hackathons included experts from climate science, software engineering, and high-performance computing, as well as users from the energy and agricultural sectors. The continuous efforts over the four cycles allowed us to produce 30-year simulations of ICON and IFS-FESOM, spanning the period 2020–2049 under the SSP3-7.0 scenario. The throughput was about 500 simulated days per day on the Levante supercomputer of the German Climate Computing Center (DKRZ). The simulations employed a horizontal grid of about 5 km resolution in the ocean and 10 km resolution in the atmosphere and land. Aside from this technical achievement, the simulations allowed us to gain new insights into the realism of ICON and IFS-FESOM. Beyond its timeframe, nextGEMS builds the foundation of the Climate Change Adaptation Digital Twin developed in the Destination Earth initiative and paves the way for future European research on climate change.
- 20 June 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-39
Open AccessComment on egusphere-2025-509
The Next Generation of Earth Modeling Systems (nextGEMS) project aimed to produce multi-decadal climate simulations, for the first time, with resolved kilometer-scale (km-scale) processes in the ocean, land, and atmosphere. In only three years, nextGEMS achieved this milestone with the two km-scale Earth system models, ICOsahedral Non-hydrostatic model (ICON) and Integrated Forecasting System coupled to the Finite-volumE Sea ice-Ocean Model (IFS-FESOM). nextGEMS was based on three cornerstones: 1) developing km-scale Earth system models with small errors in the energy and water balance, 2) performing km-scale climate simulations with a throughput greater than one simulated year per day, and 3) facilitating new workflows for an efficient analysis of the large simulations with common data structures and output variables. These cornerstones shaped the timeline of nextGEMS, divided into four cycles. Each cycle marked the release of a new configuration of ICON and IFS-FESOM, which were evaluated at hackathons. The participants in hackathons included experts from climate science, software engineering, and high-performance computing, as well as users from the energy and agricultural sectors. The continuous efforts over the four cycles allowed us to produce 30-year simulations of ICON and IFS-FESOM, spanning the period 2020–2049 under the SSP3-7.0 scenario. The throughput was about 500 simulated days per day on the Levante supercomputer of the German Climate Computing Center (DKRZ). The simulations employed a horizontal grid of about 5 km resolution in the ocean and 10 km resolution in the atmosphere and land. Aside from this technical achievement, the simulations allowed us to gain new insights into the realism of ICON and IFS-FESOM. Beyond its timeframe, nextGEMS builds the foundation of the Climate Change Adaptation Digital Twin developed in the Destination Earth initiative and paves the way for future European research on climate change.
- Open Access
- 14 May 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-39
Comment on egusphere-2025-509
The Next Generation of Earth Modeling Systems (nextGEMS) project aimed to produce multi-decadal climate simulations, for the first time, with resolved kilometer-scale (km-scale) processes in the ocean, land, and atmosphere. In only three years, nextGEMS achieved this milestone with the two km-scale Earth system models, ICOsahedral Non-hydrostatic model (ICON) and Integrated Forecasting System coupled to the Finite-volumE Sea ice-Ocean Model (IFS-FESOM). nextGEMS was based on three cornerstones: 1) developing km-scale Earth system models with small errors in the energy and water balance, 2) performing km-scale climate simulations with a throughput greater than one simulated year per day, and 3) facilitating new workflows for an efficient analysis of the large simulations with common data structures and output variables. These cornerstones shaped the timeline of nextGEMS, divided into four cycles. Each cycle marked the release of a new configuration of ICON and IFS-FESOM, which were evaluated at hackathons. The participants in hackathons included experts from climate science, software engineering, and high-performance computing, as well as users from the energy and agricultural sectors. The continuous efforts over the four cycles allowed us to produce 30-year simulations of ICON and IFS-FESOM, spanning the period 2020–2049 under the SSP3-7.0 scenario. The throughput was about 500 simulated days per day on the Levante supercomputer of the German Climate Computing Center (DKRZ). The simulations employed a horizontal grid of about 5 km resolution in the ocean and 10 km resolution in the atmosphere and land. Aside from this technical achievement, the simulations allowed us to gain new insights into the realism of ICON and IFS-FESOM. Beyond its timeframe, nextGEMS builds the foundation of the Climate Change Adaptation Digital Twin developed in the Destination Earth initiative and paves the way for future European research on climate change.
- 14 May 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-39
Open AccessComment on egusphere-2025-509
The Next Generation of Earth Modeling Systems (nextGEMS) project aimed to produce multi-decadal climate simulations, for the first time, with resolved kilometer-scale (km-scale) processes in the ocean, land, and atmosphere. In only three years, nextGEMS achieved this milestone with the two km-scale Earth system models, ICOsahedral Non-hydrostatic model (ICON) and Integrated Forecasting System coupled to the Finite-volumE Sea ice-Ocean Model (IFS-FESOM). nextGEMS was based on three cornerstones: 1) developing km-scale Earth system models with small errors in the energy and water balance, 2) performing km-scale climate simulations with a throughput greater than one simulated year per day, and 3) facilitating new workflows for an efficient analysis of the large simulations with common data structures and output variables. These cornerstones shaped the timeline of nextGEMS, divided into four cycles. Each cycle marked the release of a new configuration of ICON and IFS-FESOM, which were evaluated at hackathons. The participants in hackathons included experts from climate science, software engineering, and high-performance computing, as well as users from the energy and agricultural sectors. The continuous efforts over the four cycles allowed us to produce 30-year simulations of ICON and IFS-FESOM, spanning the period 2020–2049 under the SSP3-7.0 scenario. The throughput was about 500 simulated days per day on the Levante supercomputer of the German Climate Computing Center (DKRZ). The simulations employed a horizontal grid of about 5 km resolution in the ocean and 10 km resolution in the atmosphere and land. Aside from this technical achievement, the simulations allowed us to gain new insights into the realism of ICON and IFS-FESOM. Beyond its timeframe, nextGEMS builds the foundation of the Climate Change Adaptation Digital Twin developed in the Destination Earth initiative and paves the way for future European research on climate change.
- Open Access
- 24 March 2025
- Published by American Geophysical Union (AGU) in Journal of Advances in Modeling Earth Systems
- Vol. 17 (3)
A First Look at the Global Climatology of Low‐Level Clouds in Storm Resolving Models
The representation of subtropical stratocumulus and trade‐wind cumulus clouds by preliminary versions of Integrated Forecasting System (IFS) and ICON km‐scale global coupled climate models is explored. These models differ profoundly in their strategy to represent subgrid‐scale processes. The IFS employs complex parameterizations, including eddy‐diffusivity mass‐flux and convection schemes. ICON applies a minimal set of paramaterizations, including the Smagorinsky‐Lilly closure. Five‐year simulations are performed and evaluated for their representation of cloud albedo, its variability with environmental parameters and the vertical structure of the atmospheric boundary layer in eight regions: four corresponding to canonical Atlantic and Pacific stratocumulus and four in their downstream trades. For stratocumulus, both models capture the albedo's mean, annual cycle, and its relationship with the parameters relevant for low cloudiness, including lower tropospheric stability. They simulate an expected thermodynamic vertical structure of a stratocumulus‐topped boundary layer. ICON largely exhibits a lower cloud base and inversion height than IFS. We speculate the disagreement can be attributed to the contrasting treatment of subgrid mixing and cloud top entrainment. In the case of trade‐wind cumulus, both models well differentiate the cloud amount, the character of annual cycles and parameter correlations, and the vertical structure from the upstream stratocumulus. The annual cycles and parameter correlations reflect the dry and wet periods. Both models overestimate mean albedo and underestimate the strength of trade‐wind inversion. With an additional ICON run, we demonstrate the strong sensitivity of stratocumulus and the weaker response of trade‐wind cumulus to the treatment of subgrid mixing.
- 24 March 2025
- Published by American Geophysical Union (AGU) in Journal of Advances in Modeling Earth Systems
- Vol. 17 (3)
Open AccessA First Look at the Global Climatology of Low‐Level Clouds in Storm Resolving Models
The representation of subtropical stratocumulus and trade‐wind cumulus clouds by preliminary versions of Integrated Forecasting System (IFS) and ICON km‐scale global coupled climate models is explored. These models differ profoundly in their strategy to represent subgrid‐scale processes. The IFS employs complex parameterizations, including eddy‐diffusivity mass‐flux and convection schemes. ICON applies a minimal set of paramaterizations, including the Smagorinsky‐Lilly closure. Five‐year simulations are performed and evaluated for their representation of cloud albedo, its variability with environmental parameters and the vertical structure of the atmospheric boundary layer in eight regions: four corresponding to canonical Atlantic and Pacific stratocumulus and four in their downstream trades. For stratocumulus, both models capture the albedo's mean, annual cycle, and its relationship with the parameters relevant for low cloudiness, including lower tropospheric stability. They simulate an expected thermodynamic vertical structure of a stratocumulus‐topped boundary layer. ICON largely exhibits a lower cloud base and inversion height than IFS. We speculate the disagreement can be attributed to the contrasting treatment of subgrid mixing and cloud top entrainment. In the case of trade‐wind cumulus, both models well differentiate the cloud amount, the character of annual cycles and parameter correlations, and the vertical structure from the upstream stratocumulus. The annual cycles and parameter correlations reflect the dry and wet periods. Both models overestimate mean albedo and underestimate the strength of trade‐wind inversion. With an additional ICON run, we demonstrate the strong sensitivity of stratocumulus and the weaker response of trade‐wind cumulus to the treatment of subgrid mixing.
- Open Access
- 19 February 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-39
nextGEMS: entering the era of kilometer-scale Earth system modeling
The Next Generation of Earth Modeling Systems (nextGEMS) project aimed to produce multi-decadal climate simulations, for the first time, with resolved kilometer-scale (km-scale) processes in the ocean, land, and atmosphere. In only three years, nextGEMS achieved this milestone with the two km-scale Earth system models, ICOsahedral Non-hydrostatic model (ICON) and Integrated Forecasting System coupled to the Finite-volumE Sea ice-Ocean Model (IFS-FESOM). nextGEMS was based on three cornerstones: 1) developing km-scale Earth system models with small errors in the energy and water balance, 2) performing km-scale climate simulations with a throughput greater than one simulated year per day, and 3) facilitating new workflows for an efficient analysis of the large simulations with common data structures and output variables. These cornerstones shaped the timeline of nextGEMS, divided into four cycles. Each cycle marked the release of a new configuration of ICON and IFS-FESOM, which were evaluated at hackathons. The participants in hackathons included experts from climate science, software engineering, and high-performance computing, as well as users from the energy and agricultural sectors. The continuous efforts over the four cycles allowed us to produce 30-year simulations of ICON and IFS-FESOM, spanning the period 2020–2049 under the SSP3-7.0 scenario. The throughput was about 500 simulated days per day on the Levante supercomputer of the German Climate Computing Center (DKRZ). The simulations employed a horizontal grid of about 5 km resolution in the ocean and 10 km resolution in the atmosphere and land. Aside from this technical achievement, the simulations allowed us to gain new insights into the realism of ICON and IFS-FESOM. Beyond its timeframe, nextGEMS builds the foundation of the Climate Change Adaptation Digital Twin developed in the Destination Earth initiative and paves the way for future European research on climate change.
- 19 February 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-39
Open AccessnextGEMS: entering the era of kilometer-scale Earth system modeling
The Next Generation of Earth Modeling Systems (nextGEMS) project aimed to produce multi-decadal climate simulations, for the first time, with resolved kilometer-scale (km-scale) processes in the ocean, land, and atmosphere. In only three years, nextGEMS achieved this milestone with the two km-scale Earth system models, ICOsahedral Non-hydrostatic model (ICON) and Integrated Forecasting System coupled to the Finite-volumE Sea ice-Ocean Model (IFS-FESOM). nextGEMS was based on three cornerstones: 1) developing km-scale Earth system models with small errors in the energy and water balance, 2) performing km-scale climate simulations with a throughput greater than one simulated year per day, and 3) facilitating new workflows for an efficient analysis of the large simulations with common data structures and output variables. These cornerstones shaped the timeline of nextGEMS, divided into four cycles. Each cycle marked the release of a new configuration of ICON and IFS-FESOM, which were evaluated at hackathons. The participants in hackathons included experts from climate science, software engineering, and high-performance computing, as well as users from the energy and agricultural sectors. The continuous efforts over the four cycles allowed us to produce 30-year simulations of ICON and IFS-FESOM, spanning the period 2020–2049 under the SSP3-7.0 scenario. The throughput was about 500 simulated days per day on the Levante supercomputer of the German Climate Computing Center (DKRZ). The simulations employed a horizontal grid of about 5 km resolution in the ocean and 10 km resolution in the atmosphere and land. Aside from this technical achievement, the simulations allowed us to gain new insights into the realism of ICON and IFS-FESOM. Beyond its timeframe, nextGEMS builds the foundation of the Climate Change Adaptation Digital Twin developed in the Destination Earth initiative and paves the way for future European research on climate change.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Representation of marine low‐level clouds in global-coupled kilometer-scale simulations
Marine boundary layer clouds stand out because of their importance for Earth's planetary albedo and their central role in determining Earth's sensitivity to forcing. The new global-coupled simulations at kilometer-scale resolution in both the atmosphere and the ocean in the framework of the H2020 nextGEMS project offer new opportunities to study cloud processes and their environmental factors, as well as provide unprecedented realism and new opportunities for comparison to observations. We examine the representation of (sub)tropical stratocumulus and trade-wind cumulus clouds by the IFS and ICON models configured with kilometer-scale resolution and global domains. The simultaneous consideration of ICON and IFS allows us to compare two strategies. The former simplifies parameterizations to understand process interactions better, sacrificing degrees of freedom to tune the model. The latter considers more sophisticated parameterizations, which allow for better tuning. The results of this study show the value of both. The performance of the four-year simulations is assessed in terms of the top-of-atmosphere (TOA) albedo and the vertical structure of the atmospheric boundary layer in eight regions where low-clouds are climatologically found. The stratocumulus regions are located in the eastern subtropical ocean basins, and the trade-wind cumulus regions are located west and equatorward from the stratocumulus ones. As an observational reference for the TOA albedo, we used satellite data from the CERES-EBAF TOA dataset.Both models captured the mean horizontal distribution and seasonal cycle of TOA albedo and the typical vertical structure of the low atmosphere over the stratocumulus regions. Despite its relatively simplistic approach to sub-grid parameterizations, particularly turbulence mixing treated with the Smagorinsky scheme, ICON performed comparably well to IFS, which employs more sophisticated solutions, including eddy-diffusivity mass flux and convection schemes. Regarding trade-wind cumulus, both models overestimate the mean TOA albedo. To validate the simulated vertical structure of the atmospheric boundary layer in the northwestern Atlantic trade-wind regime, we used the radiosondes launched at the Barbados Cloud Observatory (BCO) during the EUREC4A field campaign. The ICON and IFS models represent the main characteristics of the vertical structure of wind speed, temperature, and moisture observed at the BCO. We also find some discrepancies between the model representation and the observations. The simulations represented a colder (1 K) vertical profile than the observations. The ICON represented a drier cloud layer between 1–2 km and a moister layer above it, which is attributed to too much vertical mixing across the top of the cloud layer and suggests some revision of the stability correction function. The IFS model represented this region better than ICON, which was expected because IFS uses a shallow convection scheme, which allows better control of this region. However, IFS represented slightly drier the lowest 500 m.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessRepresentation of marine low‐level clouds in global-coupled kilometer-scale simulations
Marine boundary layer clouds stand out because of their importance for Earth's planetary albedo and their central role in determining Earth's sensitivity to forcing. The new global-coupled simulations at kilometer-scale resolution in both the atmosphere and the ocean in the framework of the H2020 nextGEMS project offer new opportunities to study cloud processes and their environmental factors, as well as provide unprecedented realism and new opportunities for comparison to observations. We examine the representation of (sub)tropical stratocumulus and trade-wind cumulus clouds by the IFS and ICON models configured with kilometer-scale resolution and global domains. The simultaneous consideration of ICON and IFS allows us to compare two strategies. The former simplifies parameterizations to understand process interactions better, sacrificing degrees of freedom to tune the model. The latter considers more sophisticated parameterizations, which allow for better tuning. The results of this study show the value of both. The performance of the four-year simulations is assessed in terms of the top-of-atmosphere (TOA) albedo and the vertical structure of the atmospheric boundary layer in eight regions where low-clouds are climatologically found. The stratocumulus regions are located in the eastern subtropical ocean basins, and the trade-wind cumulus regions are located west and equatorward from the stratocumulus ones. As an observational reference for the TOA albedo, we used satellite data from the CERES-EBAF TOA dataset.Both models captured the mean horizontal distribution and seasonal cycle of TOA albedo and the typical vertical structure of the low atmosphere over the stratocumulus regions. Despite its relatively simplistic approach to sub-grid parameterizations, particularly turbulence mixing treated with the Smagorinsky scheme, ICON performed comparably well to IFS, which employs more sophisticated solutions, including eddy-diffusivity mass flux and convection schemes. Regarding trade-wind cumulus, both models overestimate the mean TOA albedo. To validate the simulated vertical structure of the atmospheric boundary layer in the northwestern Atlantic trade-wind regime, we used the radiosondes launched at the Barbados Cloud Observatory (BCO) during the EUREC4A field campaign. The ICON and IFS models represent the main characteristics of the vertical structure of wind speed, temperature, and moisture observed at the BCO. We also find some discrepancies between the model representation and the observations. The simulations represented a colder (1 K) vertical profile than the observations. The ICON represented a drier cloud layer between 1–2 km and a moister layer above it, which is attributed to too much vertical mixing across the top of the cloud layer and suggests some revision of the stability correction function. The IFS model represented this region better than ICON, which was expected because IFS uses a shallow convection scheme, which allows better control of this region. However, IFS represented slightly drier the lowest 500 m.
- Open Access
- 8 January 2025
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 18 (1) , 93-114
The ratio of transverse to longitudinal turbulent velocity statistics for aircraft measurements
The classical theory of homogeneous isotropic turbulence predicts that the ratio of transverse to longitudinal structure functions or power spectra is equal to in the inertial subrange. For the typical turbulence cascade in the inertial subrange, it also predicts a power law scaling with an exponent of and for the structure functions and the power spectra, respectively. The goal of this study is to document the statistics of those ratios and exponents derived from aircraft observations, quantify their departures from theoretical predictions, and point out the differences among the aircraft. We estimate the transverse-to-longitudinal ratios and the scaling exponents from in situ high-rate turbulence measurements collected by three research aircraft during four field experiments in two regimes of the marine atmospheric boundary layer: shallow trade-wind convection and subtropical stratocumulus. The bulk values representing the inertial subrange were derived by fitting power law formulae to the structure functions and to the power spectra computed separately for the three components of the turbulent wind velocity measured in horizontal flight segments. The composite scale-by-scale transverse-to-longitudinal ratios were derived by averaging over the segments at common non-dimensional scales. The variability in the results can be attributed to how the wind velocity components are measured on each aircraft. The differences related to environmental conditions, e.g. between characteristic levels and regimes of the boundary layer, are of secondary importance. Experiment-averaged transverse-to-longitudinal ratios are 23 %–45 % smaller than predicted by the theory. The deviations of average scaling exponents with respect to the theoretical values range from −34 % to +47 % for structure functions and from −24 % to +22 % for power spectra, depending on experiment and velocity component. The composite scale-by-scale transverse-to-longitudinal ratios decrease and increasingly depart from with decreasing scale, in contrast to previous experimental studies on local isotropy. The reason for the disagreement in transverse-to-longitudinal ratios between the observations and the theory remains uncertain.- 8 January 2025
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 18 (1) , 93-114
Open AccessThe ratio of transverse to longitudinal turbulent velocity statistics for aircraft measurements
The classical theory of homogeneous isotropic turbulence predicts that the ratio of transverse to longitudinal structure functions or power spectra is equal to in the inertial subrange. For the typical turbulence cascade in the inertial subrange, it also predicts a power law scaling with an exponent of and for the structure functions and the power spectra, respectively. The goal of this study is to document the statistics of those ratios and exponents derived from aircraft observations, quantify their departures from theoretical predictions, and point out the differences among the aircraft. We estimate the transverse-to-longitudinal ratios and the scaling exponents from in situ high-rate turbulence measurements collected by three research aircraft during four field experiments in two regimes of the marine atmospheric boundary layer: shallow trade-wind convection and subtropical stratocumulus. The bulk values representing the inertial subrange were derived by fitting power law formulae to the structure functions and to the power spectra computed separately for the three components of the turbulent wind velocity measured in horizontal flight segments. The composite scale-by-scale transverse-to-longitudinal ratios were derived by averaging over the segments at common non-dimensional scales. The variability in the results can be attributed to how the wind velocity components are measured on each aircraft. The differences related to environmental conditions, e.g. between characteristic levels and regimes of the boundary layer, are of secondary importance. Experiment-averaged transverse-to-longitudinal ratios are 23 %–45 % smaller than predicted by the theory. The deviations of average scaling exponents with respect to the theoretical values range from −34 % to +47 % for structure functions and from −24 % to +22 % for power spectra, depending on experiment and velocity component. The composite scale-by-scale transverse-to-longitudinal ratios decrease and increasingly depart from with decreasing scale, in contrast to previous experimental studies on local isotropy. The reason for the disagreement in transverse-to-longitudinal ratios between the observations and the theory remains uncertain. - Open Access
- 7 January 2025
- Published by Wiley in Quarterly Journal of the Royal Meteorological Society
- Vol. 151 (767)
Scale‐by‐scale budget of turbulence kinetic energy in the convective atmospheric boundary layer: Analysis of structure functions
We investigate the scale‐by‐scale budget of turbulence kinetic energy in convective atmospheric boundary layers using airborne measurements performed in the shallow trade‐wind regime over the ocean by the ATR 42 aircraft during the Elucidating the Role of Cloud–Circulation Coupling in Climate (EUREC4A) measurement campaign. The simple and repeatable flight pattern sampled four altitude levels: near‐surface, the middle and top of the subcloud layer, and the cloud base. This approach provides acceptable statistical convergence, including mixed velocity–temperature and third‐order velocity structure functions. The scale‐by‐scale budget obtained from the data is approximately closed up to length‐scales of about 200 m at all four levels. At the near‐surface and mid‐subcloud levels, the buoyancy forcing supplies energy to the largest scales and becomes negligible at smaller scales. As a result, Kolmogorov equilibrium is observed over a wide range of scales, from a few to about 100 m. On the other hand, at the top‐subcloud and cloud‐base levels, the budget at scales above 10 m is far from Kolmogorov equilibrium, with a significant contribution of buoyancy forcing and turbulent transport. The contribution to the buoyancy forcing related to humidity variations is substantial and strictly positive at all four levels, even at the cloud base, where it balances the negative contribution related to temperature only.
- 7 January 2025
- Published by Wiley in Quarterly Journal of the Royal Meteorological Society
- Vol. 151 (767)
Open AccessScale‐by‐scale budget of turbulence kinetic energy in the convective atmospheric boundary layer: Analysis of structure functions
We investigate the scale‐by‐scale budget of turbulence kinetic energy in convective atmospheric boundary layers using airborne measurements performed in the shallow trade‐wind regime over the ocean by the ATR 42 aircraft during the Elucidating the Role of Cloud–Circulation Coupling in Climate (EUREC4A) measurement campaign. The simple and repeatable flight pattern sampled four altitude levels: near‐surface, the middle and top of the subcloud layer, and the cloud base. This approach provides acceptable statistical convergence, including mixed velocity–temperature and third‐order velocity structure functions. The scale‐by‐scale budget obtained from the data is approximately closed up to length‐scales of about 200 m at all four levels. At the near‐surface and mid‐subcloud levels, the buoyancy forcing supplies energy to the largest scales and becomes negligible at smaller scales. As a result, Kolmogorov equilibrium is observed over a wide range of scales, from a few to about 100 m. On the other hand, at the top‐subcloud and cloud‐base levels, the budget at scales above 10 m is far from Kolmogorov equilibrium, with a significant contribution of buoyancy forcing and turbulent transport. The contribution to the buoyancy forcing related to humidity variations is substantial and strictly positive at all four levels, even at the cloud base, where it balances the negative contribution related to temperature only.
- Open Access
- 10 October 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-24
Reply on RC2
The classical theory of homogeneous isotropic turbulence predicts the ratio of transverse to longitudinal structure functions or power spectra equal to 4/3 in the inertial subrange. For the typical turbulence cascade in the inertial subrange, it also predicts a power law scaling with an exponent of +2/3 and −5/3 for the structure functions and the power spectra, respectively. We estimate those ratios and exponents from in-situ high-rate turbulence measurements collected by three research aircraft during four field experiments in two regimes of the marine atmospheric boundary layer: shallow trade-wind convection and subtropical stratocumulus. The results were derived by fitting power law formulas to the structure functions and power spectra computed separately for the three components of the turbulent wind velocity measured in horizontal flight segments. The variability in the results can be attributed to how the wind velocity components are measured on an individual aircraft. The differences related to environmental conditions, e.g. between characteristic levels and regimes of the boundary layer, are of secondary importance. Experiment-averaged transverse-to-longitudinal ratios are 23–46 % smaller than predicted by the theory. The deviations of average scaling exponents with respect to the theoretical values range from −35 to +47 % for structure functions and from −25 to +22 % for power spectra, depending on experiment and velocity component. The reason for the disagreement in transverse-to-longitudinal ratios between the observations and the theory remains uncertain.
- 10 October 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-24
Open AccessReply on RC2
The classical theory of homogeneous isotropic turbulence predicts the ratio of transverse to longitudinal structure functions or power spectra equal to 4/3 in the inertial subrange. For the typical turbulence cascade in the inertial subrange, it also predicts a power law scaling with an exponent of +2/3 and −5/3 for the structure functions and the power spectra, respectively. We estimate those ratios and exponents from in-situ high-rate turbulence measurements collected by three research aircraft during four field experiments in two regimes of the marine atmospheric boundary layer: shallow trade-wind convection and subtropical stratocumulus. The results were derived by fitting power law formulas to the structure functions and power spectra computed separately for the three components of the turbulent wind velocity measured in horizontal flight segments. The variability in the results can be attributed to how the wind velocity components are measured on an individual aircraft. The differences related to environmental conditions, e.g. between characteristic levels and regimes of the boundary layer, are of secondary importance. Experiment-averaged transverse-to-longitudinal ratios are 23–46 % smaller than predicted by the theory. The deviations of average scaling exponents with respect to the theoretical values range from −35 to +47 % for structure functions and from −25 to +22 % for power spectra, depending on experiment and velocity component. The reason for the disagreement in transverse-to-longitudinal ratios between the observations and the theory remains uncertain.