MBMaxime Babics

Maxime Babics

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Maxime Babics has a total of 236 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Degradation of photovoltaic modules at medium voltage with different types of encapsulants

    by Marc Keller, Pascal Rain, Maxime Babics, Daniel Monchal, Jérémie Aimé

  • Open Access

    Integrated Perovskite/Silicon Tandems for Unassisted Water Splitting and CO2-to-Liquid Fuel Conversion

    by Bilawal Khan, M. Bilal Faheem, Md. Samim Hassan, Maxime Babics, Karthik Peramaiah, Chengda Ge, Hongyin Xia, Jiang Liu, Madan Saud, Yuk-Tong Cheng, et al.

    Integrated photoelectrochemical systems offer a promising pathway to produce value-added fuels from sunlight and abundant reagents. However, practical implementation remains challenging due to insufficient operating photovoltage, charge-carrier losses at the electrode–catalyst interface, and high catalytic overpotentials. Here, we fabricate a perovskite/silicon photoanode that combines a wide-bandgap metal-halide perovskite top junction with a double-textured crystalline silicon bottom junction to increase operating photovoltage. To minimize charge-transfer losses and promote catalyst adhesion, we integrate a photoanode with a graphite layer and further functionalize it with a low-overpotential Co-doped IrRu catalyst. The integrated photoanode achieves an open-circuit voltage of 1.86 V and a current density of 19 mA cm−2 at +1.23 VRHE. During unassisted two-electrode water splitting, the system achieves a solar-to-hydrogen efficiency of 16.06% and operates for 157 h. Extending to CO2-to-formate conversion, the two-electrode device reaches an applied-bias photon-to-current efficiency of 10.08% over 60 h. Our study highlights the potential of integrated photoelectrochemical systems for efficient solar-to-fuel conversion.


  • Open Access

    Long-term field degradation of crystalline-silicon PV modules: insights from fifteen years of monitoring and forensic analysis

    by J.A. Tsanakas, Maxime Babics, Frédéric Mezzasalma, Alexandre Mignonac, Hervé Colin, Lionel Sicot, Philippe Marechal, Guillaume Capron, Jean-Patrice Rakotoniaina, Jérémie Aimé

    This study presents a 15-yr real-field performance and degradation analysis of photovoltaic modules in a Mediterranean climate. Three technologies—polycrystalline silicon (p-Si), monocrystalline silicon, and amorphous silicon—were monitored, with a detailed forensic focus on the most severely degraded p-Si systems. The p-Si modules exhibited an average degradation rate of 2.56%/year, significantly exceeding the manufacturer's warranty. Laboratory flash tests confirmed power losses of −33% to −70% over fifteen years. A multi-method diagnostic approach, integrating electroluminescence, ultraviolet fluorescence, lock-in thermography, and material forensics, identified two primary synergistic degradation pathways. The first involves optical losses from encapsulant yellowing, reducing current uniformly. The second, and more critical, is a severe increase in series resistance caused by interconnect corrosion and delamination, which drastically reduces the fill factor. Microcracks, while widespread, were a secondary factor. The study unequivocally links the degradation to moisture, oxygen, and light exposure, as evidenced by localized protection under a metal-backed nameplate. These findings underscore the critical discrepancy between accelerated testing and field aging, highlighting the necessity of long-term monitoring for accurate lifetime predictions and the development of more durable module materials and designs.

  • Performance and Reliability of PV Modules Made With Novel Co‐Extruded Encapsulant Containing UV Downshifting Compound

    by Maxime Babics, Vincent Barth, Yannick Roujol, Timea Béjat, Marion Sérasset, Amandine Boulanger, Axel Descormes, Jérémie Aime, Damien Boyer, Gabriele Bianca, et al.

    Encapsulants are critical in ensuring long photovoltaic (PV) module lifetimes. Recent innovations in encapsulant formulation are modifying the encapsulant landscape with the promises of techno‐economic advantages: cell technology‐specific materials, the use of multilayer encapsulants, and the use of UV downshifting films (UV‐DS). In this work, we present one of the first complete material and module‐level performance and reliability testing of one of the latest generations of commercial coextruded EVA/POE/EVA (EPE) encapsulant containing an organic downshifting luminescent chromophore. We demonstrate that the encapsulant maintains excellent optical, mechanical, and adhesion properties at the initial time and after aging. We investigate the diffusion of the additives occurring between the solar cells upon thermal treatment, revealing a potential competition between luminescent and UV‐cut additives. Silicon heterojunction (SHJ) mini‐modules pass three times the IEC61215–1:2021 damp heat and thermal cycling sequences with minimal performance losses of 1.3% and 2.0%, respectively. Commercial‐sized modules fabricated with UV‐DS encapsulant show a power gain of 1.75% over the conventional UV‐cut‐based modules. We demonstrate a high spectrum dependence of these results based on the light source used for the measurement. Finally, outdoor monitoring confirms the energy gain and highlights its dependence on the UV content of the on‐site solar spectrum, with a 2.2% energy production gain in the summer that drops to less than 1% in the winter due to lower UVA irradiances.


  • Open Access

    Understanding UV‐Induced Degradation Mechanisms in SHJ Solar Cells and Their Reversibility: The Role of Hydrogen and Doping

    by Hugo Lajoie, Frédéric Jay, Maxime Babics, Tristan Gageot, Romain Couderc, Névine Rochat, Hélène Coudert‐Alteirac, Sandrine Therias

    Silicon heterojunction solar cells are among the leading PV technologies for high‐efficiency modules, but their sensitivity to UV radiation raises durability concerns for outdoor deployment. In this study, we investigate the UV‐induced degradation of silicon heterojunction cell precursors by isolating the impact of subcell layers under controlled UVA and UVB irradiations. Our results identify the front hydrogenated amorphous silicon (i/n)a‐Si:H layers as key degradation sites, exhibiting significant losses in minority carrier lifetime and iV oc ( mV). Fourier‐transform infrared (FTIR) spectroscopy indicated a selective degradation of high stretching mode Si–H n bonding configurations, creating defects at the c‐Si/a‐Si:H interface and releasing free hydrogen. These mobile and reactive hydrogen species intensely degrade both passivation mechanisms (chemical and field‐effect) by electrically inhibiting dopants via P–H complex formation. Light soaking treatments combining thermal and light activation enable significant passivation and conductivity recovery through hydrogen redistribution, though reversibility diminishes at high UVA doses, indicating a photon‐dose‐dependent degradation threshold. These findings provide mechanistic insights into UVID pathways and highlight the importance of hydrogen management and UV attenuation strategies for long‐term SHJ module reliability.


  • Elucidating the photodegradation pathways of polymer donors for organic solar cells with seven months of outdoor operational stability

    by Han Xu, Jianhua Han, Maxime Babics, Luis Huerta Hernandez, Diego Rosas Villalva, Matteo Sanviti, Jules Bertrandie, Yongcao Zhang, Ye Liu, Hu Chen, et al.


  • Open Access

    Author Correction: Sublimed C60 for efficient and repeatable perovskite-based solar cells

    by Ahmed A. Said, Erkan Aydin, Esma Ugur, Zhaojian Xu, Caner Deger, Badri Vishal, Aleš Vlk, Pia Dally, Bumin K. Yildirim, Randi Azmi, et al.


  • Open Access

    Author Correction: Vertically oriented low-dimensional perovskites for high-efficiency wide band gap perovskite solar cells

    by Andrea Zanetta, Valentina Larini, Francesco Toniolo, Badri Vishal, Karim A Elmestekawy, Jiaxing Du, Alice Scardina, Fabiola Faini, Giovanni Pica, Valentina Pirota, et al.


  • Open Access

    Vertically oriented low-dimensional perovskites for high-efficiency wide band gap perovskite solar cells

    by Andrea Zanetta, Valentina Larini, Francesco Toniolo, Badri Vishal, Karim A. Elmestekawy, Jiaxing Du, Alice Scardina, Fabiola Faini, Giovanni Pica, Valentina Pirota, et al.

    Controlling crystal growth alignment in low-dimensional perovskites (LDPs) for solar cells has been a persistent challenge, especially for low-n LDPs (n < 3, n is the number of octahedral sheets) with wide band gaps (>1.7 eV) impeding charge flow. Here we overcome such transport limits by inducing vertical crystal growth through the addition of chlorine to the precursor solution. In contrast to 3D halide perovskites (APbX3), we find that Cl substitutes I in the equatorial position of the unit cell, inducing a vertical strain in the perovskite octahedra, and is critical for initiating vertical growth. Atomistic modelling demonstrates the thermodynamic stability and miscibility of Cl/I structures indicating the preferential arrangement for Cl-incorporation at I-sites. Vertical alignment persists at the solar cell level, giving rise to a record 9.4% power conversion efficiency with a 1.4 V open circuit voltage, the highest reported for a 2 eV wide band gap device. This study demonstrates an atomic-level understanding of crystal tunability in low-n LDPs and unlocks new device possibilities for smart solar facades and indoor energy generation.


  • Mitigating Buried-Interface Energy Losses through Multifunctional Ligands in n–i–p Perovskite/Silicon Tandem Solar Cells

    by Shanshan Zhang, Jiantao Wang, Nikhil Kalasariya, Pia Dally, Caner Deger, Ilhan Yavuz, Arsalan Razzaq, Badri Vishal, Adi Prasetio, Drajad Satrio Utomo, et al.