Timothy S. Weeks
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Timothy S. Weeks has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Chester John Van Tyne
Colorado School of Mines
1 shared publication - John G. Speer
Metallurgical and Materials Engineering, Colorado School of Mines, Golden, USA
1 shared publication - Singon Kang
Department of Materials Science and Engineering Dong-A University 37 Nakdong-Daero 550 Saha-gu 49315 Busan Republic of Korea
1 shared publication
Latest Publications
- Open Access
Effect of Pipe Flattening in API X65 Linepipe Steels Having Bainite vs. Ferrite/Pearlite Microstructures
The influence of microstructure on pipe flattening response was assessed using two different commercially produced U-ing, O-ing, and expansion (UOE) pipes from API X65 steels having either a bainitic microstructure (steel B) or a ferrite/pearlite microstructure (steel FP). A four-point bending apparatus and distinctive procedure were used to minimize strain localization during flattening. The flattened specimens were sectioned at different positions through the thickness, and tensile tested in both the longitudinal (LD) and transverse directions (TD) to assess the through-thickness variation in properties. Yield strength (YS) distributions in the LD show V-shaped profiles through thickness in both steels, whereas the YS in the TD nearest the outside diameter (OD) surface is reduced. These variations in YS are due to the Bauschinger effect associated with the compressive flattening pre-strain. The uniform elongation (UE) of steel FP is almost independent of specimen position through the thickness, but for steel B there is a substantial reduction of the UE at both the inside and outside diameter positions and this reduction is greater in the LD. This work confirms that flattened pipe mechanical properties exhibit an important dependence on their microstructure type and it is postulated that the flattening procedure also influences the mechanical properties.
Open AccessEffect of Pipe Flattening in API X65 Linepipe Steels Having Bainite vs. Ferrite/Pearlite Microstructures
The influence of microstructure on pipe flattening response was assessed using two different commercially produced U-ing, O-ing, and expansion (UOE) pipes from API X65 steels having either a bainitic microstructure (steel B) or a ferrite/pearlite microstructure (steel FP). A four-point bending apparatus and distinctive procedure were used to minimize strain localization during flattening. The flattened specimens were sectioned at different positions through the thickness, and tensile tested in both the longitudinal (LD) and transverse directions (TD) to assess the through-thickness variation in properties. Yield strength (YS) distributions in the LD show V-shaped profiles through thickness in both steels, whereas the YS in the TD nearest the outside diameter (OD) surface is reduced. These variations in YS are due to the Bauschinger effect associated with the compressive flattening pre-strain. The uniform elongation (UE) of steel FP is almost independent of specimen position through the thickness, but for steel B there is a substantial reduction of the UE at both the inside and outside diameter positions and this reduction is greater in the LD. This work confirms that flattened pipe mechanical properties exhibit an important dependence on their microstructure type and it is postulated that the flattening procedure also influences the mechanical properties.