Jerzy Debosz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jerzy Debosz has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Yushan Su
Environmental Monitoring and Reporting Branch, Ontario Ministry of the Environment, Conservation and Parks, Toronto, ON M9P 3V6, Canada
4 shared publications - Anthony Munoz
Ontario Ministry of the Environment, Conservation and Parks, Toronto, ON M9P 3V6, Canada
3 shared publications - Michael Noble
Environmental Monitoring and Reporting Branch, Ontario Ministry of the Environment, Conservation and Parks, Toronto, ON M9P 3V6, Canada
3 shared publications - Tianchu Zhang
Department of Civil and Environmental Engineering, University of Windsor, Windsor, ON N9B 3P4, Canada
3 shared publications - Xiaohong Xu
Department of Civil and Environmental Engineering, University of Windsor, Windsor, ON N9B 3P4, Canada
3 shared publications - Anthony Munoz
Environmental Monitoring and Reporting Branch, Ontario Ministry of the Environment, Conservation and Parks, Toronto, ON M9P 3V6, Canada
1 shared publication
Latest Publications
- Open Access
- 23 March 2026
- Published by MDPI AG in Atmosphere
- Vol. 17 (3) , 328
Concentrations and Health Risk Assessment of Ambient PM2.5-Bound Elements in Windsor, Ontario, Canada
Hourly concentrations of PM2.5-bound elements were continuously monitored in Windsor, Canada, from April 2021 to April 2023. Health risk assessment methods of the USEPA were utilized to quantify lifetime cumulative cancer risks (CRs) using six PM2.5-bound elements, and chronic non-cancer hazard quotients (HQs) using 11 elements, for each season, each source factor, and each hour of day. The two-year average PM2.5 mass concentration was 9.2 μg/m3, slightly exceeding Ontario’s Ambient Air Quality Criteria of 8.8 μg/m3. A discernible diurnal concentration pattern was noted for most elements, peaking during morning rush hours and tapering during the daytime, largely attributed to local human activities and changes in atmospheric mixing heights. Despite this, both the total lifetime cumulative CR (4.1 × 10−5) and non-cancer total HQ (0.82) from exposure to ambient elements remained below the corresponding USEPA-acceptable levels. The seasonal variation in CRs and HQs was minimal. However, the diurnal variation was strong, with higher risks during morning rush hours (6:00–8:00) when traffic volume peaks, and lower risks during the daytime (12:00–20:00) when atmospheric mixing height is enhanced. Metal processing emerged as the most significant contributor to the total CR (52%) and HQ (60%), followed by coal/heavy oil burning (19% and 16%, respectively), and vehicular exhaust (19% and 12%, respectively). The remaining two source factors accounted for 10% of CR and 12% of HQ. Cd (62%) was the largest contributor to CRs, followed by Cr(VI) (25%), Co (6%), As (5%), Ni (2%), and Pb (<0.1%). Similarly, Cd dominated HQs (73%), followed by Mn (11%), Ni (6.3%), with the remaining eight elements collectively contributing 9.7%. Although levels of CRs and HQs are low, efforts to mitigate ambient Cd emissions from metal processing sources will help reduce exposure and protect the environment and human health, given Cd is the primary contributor to the total CR and HQ during the study period.
- 23 March 2026
- Published by MDPI AG in Atmosphere
- Vol. 17 (3) , 328
Open AccessConcentrations and Health Risk Assessment of Ambient PM2.5-Bound Elements in Windsor, Ontario, Canada
Hourly concentrations of PM2.5-bound elements were continuously monitored in Windsor, Canada, from April 2021 to April 2023. Health risk assessment methods of the USEPA were utilized to quantify lifetime cumulative cancer risks (CRs) using six PM2.5-bound elements, and chronic non-cancer hazard quotients (HQs) using 11 elements, for each season, each source factor, and each hour of day. The two-year average PM2.5 mass concentration was 9.2 μg/m3, slightly exceeding Ontario’s Ambient Air Quality Criteria of 8.8 μg/m3. A discernible diurnal concentration pattern was noted for most elements, peaking during morning rush hours and tapering during the daytime, largely attributed to local human activities and changes in atmospheric mixing heights. Despite this, both the total lifetime cumulative CR (4.1 × 10−5) and non-cancer total HQ (0.82) from exposure to ambient elements remained below the corresponding USEPA-acceptable levels. The seasonal variation in CRs and HQs was minimal. However, the diurnal variation was strong, with higher risks during morning rush hours (6:00–8:00) when traffic volume peaks, and lower risks during the daytime (12:00–20:00) when atmospheric mixing height is enhanced. Metal processing emerged as the most significant contributor to the total CR (52%) and HQ (60%), followed by coal/heavy oil burning (19% and 16%, respectively), and vehicular exhaust (19% and 12%, respectively). The remaining two source factors accounted for 10% of CR and 12% of HQ. Cd (62%) was the largest contributor to CRs, followed by Cr(VI) (25%), Co (6%), As (5%), Ni (2%), and Pb (<0.1%). Similarly, Cd dominated HQs (73%), followed by Mn (11%), Ni (6.3%), with the remaining eight elements collectively contributing 9.7%. Although levels of CRs and HQs are low, efforts to mitigate ambient Cd emissions from metal processing sources will help reduce exposure and protect the environment and human health, given Cd is the primary contributor to the total CR and HQ during the study period.
- Open Access
- 10 August 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (8) , 1269
Sensitivity of Source Apportionment of Ambient PM2.5-Bound Elements to Input Concentration Data
This study investigated the sensitivity of the positive matrix factorization (PMF) model using concentrations of PM2.5-bound elements in Windsor, Ontario, Canada. Five scenarios were devised to assess impacts of input data on source identification, source contributions, and model performance. The study found that the model outcomes and performance were not sensitive to data below method detection limits (MDLs) being replaced with ½ MDLs, nor whether brown carbons (BrCs) data were excluded. By analyzing two episodic events individually, unique factors of fireworks and mineral dust were identified for each of the two episodes. Moreover, PMF model performance was improved greatly for event markers of the episodes and elements with less variability in concentration when compared with the base case scenario. Excluding the two episodes from the entire dataset had little impact on factor identification and source contributions but improved the model performance for three out of twelve elements unique to the two episodes. Overall, the PMF model outcomes and performance were sensitive to percentages of concentrations below MDLs and element concentrations with large variability due to high concentrations observed in episodes. Our findings are useful for dealing with data below MDLs and episodic events in conducting future PMF source apportionment of PM2.5-bound elements.
- 10 August 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (8) , 1269
Open AccessSensitivity of Source Apportionment of Ambient PM2.5-Bound Elements to Input Concentration Data
This study investigated the sensitivity of the positive matrix factorization (PMF) model using concentrations of PM2.5-bound elements in Windsor, Ontario, Canada. Five scenarios were devised to assess impacts of input data on source identification, source contributions, and model performance. The study found that the model outcomes and performance were not sensitive to data below method detection limits (MDLs) being replaced with ½ MDLs, nor whether brown carbons (BrCs) data were excluded. By analyzing two episodic events individually, unique factors of fireworks and mineral dust were identified for each of the two episodes. Moreover, PMF model performance was improved greatly for event markers of the episodes and elements with less variability in concentration when compared with the base case scenario. Excluding the two episodes from the entire dataset had little impact on factor identification and source contributions but improved the model performance for three out of twelve elements unique to the two episodes. Overall, the PMF model outcomes and performance were sensitive to percentages of concentrations below MDLs and element concentrations with large variability due to high concentrations observed in episodes. Our findings are useful for dealing with data below MDLs and episodic events in conducting future PMF source apportionment of PM2.5-bound elements.
- Open Access
- 14 February 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (2) , 374
Continuous Measurements and Source Apportionment of Ambient PM2.5-Bound Elements in Windsor, Canada
Ambient fine particulate matter (PM2.5) levels in Windsor, Ontario, Canada, are impacted by local emissions and regional/transboundary transport input and also attributable to secondary formation. PM2.5-bound elements were monitored hourly in Windsor from April to October 2021. Observed concentrations of the elements were generally comparable to historical measurements at urban sites in Ontario. A clear diurnal pattern was observed for most of the elements, i.e., high in the morning and low in the afternoon, mostly related to evolution of atmospheric mixing heights and local anthropogenic activities. Conversely, sulfur showed elevated levels in the afternoon, suggesting conversion of gaseous sulfur dioxide to particulate sulphate was enhanced by increased ambient temperatures. Five source factors were resolved using the US EPA positive matrix factorization model, including three traffic-related sources (i.e., vehicular exhaust, crustal dust, and vehicle tire and brake wear factors) and two industrial sources (i.e., coal/heavy oil burning and metal processing factors). Overall, the three traffic-related sources were mostly local and contributed to 47% of the total elemental concentrations, while the two industrial sources may originate from regional/transboundary sources and contributed to 53%. Measures to control both local traffic emissions and regional/transboundary industrial sources would help reduce levels of PM2.5-bound elements in Windsor.
- 14 February 2023
- Published by MDPI AG in Atmosphere
- Vol. 14 (2) , 374
Open AccessContinuous Measurements and Source Apportionment of Ambient PM2.5-Bound Elements in Windsor, Canada
Ambient fine particulate matter (PM2.5) levels in Windsor, Ontario, Canada, are impacted by local emissions and regional/transboundary transport input and also attributable to secondary formation. PM2.5-bound elements were monitored hourly in Windsor from April to October 2021. Observed concentrations of the elements were generally comparable to historical measurements at urban sites in Ontario. A clear diurnal pattern was observed for most of the elements, i.e., high in the morning and low in the afternoon, mostly related to evolution of atmospheric mixing heights and local anthropogenic activities. Conversely, sulfur showed elevated levels in the afternoon, suggesting conversion of gaseous sulfur dioxide to particulate sulphate was enhanced by increased ambient temperatures. Five source factors were resolved using the US EPA positive matrix factorization model, including three traffic-related sources (i.e., vehicular exhaust, crustal dust, and vehicle tire and brake wear factors) and two industrial sources (i.e., coal/heavy oil burning and metal processing factors). Overall, the three traffic-related sources were mostly local and contributed to 47% of the total elemental concentrations, while the two industrial sources may originate from regional/transboundary sources and contributed to 53%. Measures to control both local traffic emissions and regional/transboundary industrial sources would help reduce levels of PM2.5-bound elements in Windsor.
- Open Access
- 17 May 2018
- Published by MDPI AG in Atmosphere
- Vol. 9 (5) , 191
Multi-Year Continuous PM2.5 Measurements with the Federal Equivalent Method SHARP 5030 and Comparisons to Filter-Based and TEOM Measurements in Ontario, Canada
Continuous monitoring of fine particulate matter (PM2.5) is important to provide near-real-time air quality information for public health protection, especially when ambient levels are elevated. The Tapered Element Oscillating Microbalance (TEOM), operated at 30 °C with a sample equilibration system (SES), was used to measure PM2.5 hourly concentrations from 2002 to 2012 in Ontario, Canada. In January 2013, the Federal Equivalent Method (FEM) Synchronized Hybrid Ambient Real-time Particulate (SHARP) model 5030 monitors replaced the TEOM devices at all monitoring stations across the province to improve measurements in cold months. Continuous PM2.5 measurements from 2013 to 2016 showed good reliability of the SHARP 5030 with an average 98% valid hourly data reported to the public. Collocated measurements indicated that 24 h averages of the SHARP 5030 were comparable to those by the filter-based integrated samplers including the Federal Reference Method (FRM), and the FEM dichotomous (Dichot) and Speciation samplers. The slope and intercept of the linear regression between the SHARP 5030 and the FRM results generally met the acceptance limits for PM2.5 Class III FEM designation, and the ratio of FEM/FRM was 1.0 or 1.1. Twenty-four-hour averages of the SHARP 5030 also correlated well with the collocated 24 h Dichot and Speciation results. The difference percentages between SHARP 5030 and 24 h integrated results were found to be larger at low rather than at high PM2.5 levels, but not dependent on seasons. Absolute differences ranged from 0 to 16 µg/m3 and root mean square differences ranged from 2.0 to 2.3 µg/m3 when the SHARP 5030 was compared with the FRM, Dichot, and Speciation samplers. A simplified approach was further developed to correct historical TEOM data for cold months to continue long-term trend analyses based on collocated measurements at eight stations where PM2.5 emission sources varied.
- 17 May 2018
- Published by MDPI AG in Atmosphere
- Vol. 9 (5) , 191
Open AccessMulti-Year Continuous PM2.5 Measurements with the Federal Equivalent Method SHARP 5030 and Comparisons to Filter-Based and TEOM Measurements in Ontario, Canada
Continuous monitoring of fine particulate matter (PM2.5) is important to provide near-real-time air quality information for public health protection, especially when ambient levels are elevated. The Tapered Element Oscillating Microbalance (TEOM), operated at 30 °C with a sample equilibration system (SES), was used to measure PM2.5 hourly concentrations from 2002 to 2012 in Ontario, Canada. In January 2013, the Federal Equivalent Method (FEM) Synchronized Hybrid Ambient Real-time Particulate (SHARP) model 5030 monitors replaced the TEOM devices at all monitoring stations across the province to improve measurements in cold months. Continuous PM2.5 measurements from 2013 to 2016 showed good reliability of the SHARP 5030 with an average 98% valid hourly data reported to the public. Collocated measurements indicated that 24 h averages of the SHARP 5030 were comparable to those by the filter-based integrated samplers including the Federal Reference Method (FRM), and the FEM dichotomous (Dichot) and Speciation samplers. The slope and intercept of the linear regression between the SHARP 5030 and the FRM results generally met the acceptance limits for PM2.5 Class III FEM designation, and the ratio of FEM/FRM was 1.0 or 1.1. Twenty-four-hour averages of the SHARP 5030 also correlated well with the collocated 24 h Dichot and Speciation results. The difference percentages between SHARP 5030 and 24 h integrated results were found to be larger at low rather than at high PM2.5 levels, but not dependent on seasons. Absolute differences ranged from 0 to 16 µg/m3 and root mean square differences ranged from 2.0 to 2.3 µg/m3 when the SHARP 5030 was compared with the FRM, Dichot, and Speciation samplers. A simplified approach was further developed to correct historical TEOM data for cold months to continue long-term trend analyses based on collocated measurements at eight stations where PM2.5 emission sources varied.