Peter Mascher
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Peter Mascher has a total of 475 co-authors. Here are the top co-authors by number of shared publications:
J. Wojcik
Department of Engineering Physics and Centre for Emerging Device Technologies, McMaster University, Hamilton, Ontario L8S 4L7, Canada
49 shared publicationsJacek Wojcik
Intlvac Thin Film 2 , 247 Armstrong Avenue, Halton Hills, Ontario L7G 4X6
18 shared publications- J. S. Preston
McMaster University 1 Department of Engineering Physics Hamilton, Ontario L8S 4L7, Canada
17 shared publications O. H. Y. Zalloum
Department of Engineering Physics and Centre for Emerging Device Technologies, McMaster University, 1280 Main St. W, Hamilton, Ontario L8S4L7, Canada
15 shared publicationsJ. Misiewicz
Department of Experimental Physics, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland
14 shared publications- Zahra Khatami
Department of Electrical and Computer Engineering, University of New Brunswick, Fredericton, NB E3B 5A3, Canada
14 shared publications
Latest Publications
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (23) , 1284
Luminescence Properties of Eu-Doped Silicon-Based Thin Films Fabricated by ECR-PECVD and Magnetron Sputtering
Silicon (Si) based optoelectronic components are becoming very important for the advanced silicon photonics industry. Such components are also highly desirable for biochemical sensor applications in medicine and environmental control. However, the indirect band gap of bulk Si has limited its light emission efficiency . Several methods have been developed to engineer Si into an efficient light emitter, and among them, doping Si with rare earth ions has earned significant interest due to their excellent luminescent and chemical stability. Europium (Eu) is one of the promising rare earths that exhibits two optically active states, Eu2+ and Eu3+, making it suitable for a wide range of color emission from the blue to the red spectral region. Thus, Eu-doping is very attractive in the fields of silicon photonics, along with solid state lighting, display, senor and photovoltaic applications.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (23) , 1284
Luminescence Properties of Eu-Doped Silicon-Based Thin Films Fabricated by ECR-PECVD and Magnetron Sputtering
Silicon (Si) based optoelectronic components are becoming very important for the advanced silicon photonics industry. Such components are also highly desirable for biochemical sensor applications in medicine and environmental control. However, the indirect band gap of bulk Si has limited its light emission efficiency . Several methods have been developed to engineer Si into an efficient light emitter, and among them, doping Si with rare earth ions has earned significant interest due to their excellent luminescent and chemical stability. Europium (Eu) is one of the promising rare earths that exhibits two optically active states, Eu2+ and Eu3+, making it suitable for a wide range of color emission from the blue to the red spectral region. Thus, Eu-doping is very attractive in the fields of silicon photonics, along with solid state lighting, display, senor and photovoltaic applications.
- Top Cited Papers
- 19 March 2026
- Published by Springer Nature in Nature Photonics
- Vol. 20 (6) , 637-643
Surface acoustic wave Brillouin photonics on a silicon nitride chip
- 19 March 2026
- Published by Springer Nature in Nature Photonics
- Vol. 20 (6) , 637-643
Top Cited PapersSurface acoustic wave Brillouin photonics on a silicon nitride chip
- Open Access
- 1 March 2026
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 15 (3) , 036002
Luminescence Properties of Eu-Doped Silicon (Oxy)carbonitride Thin Films Fabricated by ECR-PECVD and Magnetron Sputtering
Europium doped silicon (oxy)carbonitride (Si(O)CN) thin films were fabricated using an integrated electron cyclotron resonance plasma-enhanced chemical vapor deposition system combined with in situ magnetron sputtering. Post-deposition annealing was performed from 800 °C to 1200 °C to investigate europium activation within the Si(O)CN matrix. Room-temperature photoluminescence revealed visible bright red emission attributed to the intra 4 f transition of Eu 3+ ions, prominently observed in films annealed at 1100 °C and 1200 °C. A detailed compositional analysis was performed with a combination of Rutherford backscattering spectrometry and elastic recoil detection analysis showing nearly 7 at% of europium in the luminescent film. The presence of crystalline phases from the high temperature annealed samples was confirmed by X-ray diffraction analysis. These investigations were conducted to assess the feasibility of amorphous Si(O)CN as a thermally and chemically stable, silicon-compatible host for rare-Earth doping. Europium doped Si(O)CN can offer promising potential for visible light emission in next generation integrated photonic and optoelectronic devices.
- 1 March 2026
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 15 (3) , 036002
Open AccessLuminescence Properties of Eu-Doped Silicon (Oxy)carbonitride Thin Films Fabricated by ECR-PECVD and Magnetron Sputtering
Europium doped silicon (oxy)carbonitride (Si(O)CN) thin films were fabricated using an integrated electron cyclotron resonance plasma-enhanced chemical vapor deposition system combined with in situ magnetron sputtering. Post-deposition annealing was performed from 800 °C to 1200 °C to investigate europium activation within the Si(O)CN matrix. Room-temperature photoluminescence revealed visible bright red emission attributed to the intra 4 f transition of Eu 3+ ions, prominently observed in films annealed at 1100 °C and 1200 °C. A detailed compositional analysis was performed with a combination of Rutherford backscattering spectrometry and elastic recoil detection analysis showing nearly 7 at% of europium in the luminescent film. The presence of crystalline phases from the high temperature annealed samples was confirmed by X-ray diffraction analysis. These investigations were conducted to assess the feasibility of amorphous Si(O)CN as a thermally and chemically stable, silicon-compatible host for rare-Earth doping. Europium doped Si(O)CN can offer promising potential for visible light emission in next generation integrated photonic and optoelectronic devices.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (18) , 1232
Tunable Emission from Europium-Doped Silicon Oxynitride Thin Films
This work reports tunable emission of Eu 3+ and Eu 2+ from SiO x N y films fabricated by integrated electron cyclotron plasma enhanced chemical vapor deposition and magnetron sputtering. The photoluminescence (PL) spectra of intense red emission from Eu 3+ around 600 nm and blue broadband emission from 400 to 750 nm of Eu 2+ are observed under daylight conditions with the naked eye. The findings of this work are promising toward the realization of europium doped Si-based materials for photonics and lighting technologies. Silicon (Si) based optoelectronic components are becoming very important for the advanced silicon photonic industry 1 . These optoelectronics components are also highly desirable for biochemical sensor applications in medicine and environmental control 2 . 3,4 However, the indirect band gap of bulk Si has limited its light emission efficiency . Several methods have been developed to engineer Si into an efficient light emitter, and among them, doping Si with rare earth ions has earned significant interest due to their excellent luminescent and chemical stability. Europium (Eu) is one of the promising rare earths that exhibits two optically active states, Eu 2+ and Eu 3+ , making it suitable for a wide range of color emission from the blue to the red spectral region 5 . The emission lines of Eu 3+ correspond to the transitions from the excited 5 D 0 level to the 7 F J (J= 0 to 6) level of the 4f n configuration and generate sharp peaks in the red spectral range. On the other hand, the emission from Eu 2+ occursdue to the electronic transitions from the 4f 6 5d 1 level to the 4f 7 shell, and emission happens between 400 to 800 nm 6 . Thus, Eu is very attractive in the fields of silicon photonics, along with solid state lighting, display, senor and photovoltaic applications 7 . In this study, we have investigated the optical properties and compositions of Eu-doped Si oxynitride thin films prepared by integrated electron cyclotron resonance plasma enhanced chemical vapor deposition and magnetron sputtering (ECR–PECVD) on p-type Si substrates. Different samples were fabricated by varying nitrogen and oxygen flow to understand the effect of the surrounding matrix on the luminescence. Post-deposition annealing was performed at different temperatures ranging from 600 to 1200 O C. The dependencies of the PL properties on Eu concentrations and annealing temperatures were investigated in detail. It is found that films annealed at a temperature higher than 1000 O C produced bright red emission from Eu 3+ and bright blue emission from Eu 2+ , which can be seen under daylight conditions with the naked eye. Furthermore, the existence of Eu-containing phases is confirmed by high-resolution X-ray diffraction spectroscopy (XRD). The stoichiometry of the films is analyzed by Rutherford backscattering spectrometry (RBS) and elastic recoil detection analysis (ERDA). The optical constants and thickness of the films are analyzed by variable angle spectroscopic ellipsometry (VASE). This work highlights the tunable luminescence property of Eu doped SiO x N y thin films, making them promising candidates in light emission systems for optoelectronic platforms. Acknowledgements: This work is funded by NSERC Discovery Grant RGPIN-2019-06023 and ORF Grant ORF-RE 09-051. References Wang Z, Abbasi A, Dave U, et al., Laser Photon Rev . 2017;11(4). doi:10.1002/lpor.201700063 Germer S, Cherkouk C, Rebohle L, Helm M, Skorupa W., SPIE 8767, Integrated Photonics: Materials, Devices, and Applications II . 2013;8767:1-13. doi:10.1117/12.2017275 Tian Y, Chen B, Hua R, et al., J. Appl. Phys . 2011; 109 (5): 53511. doi:10.1063/1.3551584 Tian Y, Chen B, Hua R, et al., Cryst. Eng. Comm . 2012; 14 (5): 1760-1769. doi:10.1039/C1CE06232H Lin Z, Huang R, Wang H, et al., J. Alloys Compd . 2017; 694: 946-951. doi:10.1016/j.jallcom.2016.10.132 Azmi F, Gao Y, Khatami Z, Mascher P., J. Vac. Sci. Technol. A 2022; (043402). doi:10.1116/6.0001761 Bellocchi G, Franzò G, Iacona F, et al., Opt. Express . 2012; 20 (5): 5501-5507. doi:10.1364/OE.20.005501
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (18) , 1232
Tunable Emission from Europium-Doped Silicon Oxynitride Thin Films
This work reports tunable emission of Eu 3+ and Eu 2+ from SiO x N y films fabricated by integrated electron cyclotron plasma enhanced chemical vapor deposition and magnetron sputtering. The photoluminescence (PL) spectra of intense red emission from Eu 3+ around 600 nm and blue broadband emission from 400 to 750 nm of Eu 2+ are observed under daylight conditions with the naked eye. The findings of this work are promising toward the realization of europium doped Si-based materials for photonics and lighting technologies. Silicon (Si) based optoelectronic components are becoming very important for the advanced silicon photonic industry 1 . These optoelectronics components are also highly desirable for biochemical sensor applications in medicine and environmental control 2 . 3,4 However, the indirect band gap of bulk Si has limited its light emission efficiency . Several methods have been developed to engineer Si into an efficient light emitter, and among them, doping Si with rare earth ions has earned significant interest due to their excellent luminescent and chemical stability. Europium (Eu) is one of the promising rare earths that exhibits two optically active states, Eu 2+ and Eu 3+ , making it suitable for a wide range of color emission from the blue to the red spectral region 5 . The emission lines of Eu 3+ correspond to the transitions from the excited 5 D 0 level to the 7 F J (J= 0 to 6) level of the 4f n configuration and generate sharp peaks in the red spectral range. On the other hand, the emission from Eu 2+ occursdue to the electronic transitions from the 4f 6 5d 1 level to the 4f 7 shell, and emission happens between 400 to 800 nm 6 . Thus, Eu is very attractive in the fields of silicon photonics, along with solid state lighting, display, senor and photovoltaic applications 7 . In this study, we have investigated the optical properties and compositions of Eu-doped Si oxynitride thin films prepared by integrated electron cyclotron resonance plasma enhanced chemical vapor deposition and magnetron sputtering (ECR–PECVD) on p-type Si substrates. Different samples were fabricated by varying nitrogen and oxygen flow to understand the effect of the surrounding matrix on the luminescence. Post-deposition annealing was performed at different temperatures ranging from 600 to 1200 O C. The dependencies of the PL properties on Eu concentrations and annealing temperatures were investigated in detail. It is found that films annealed at a temperature higher than 1000 O C produced bright red emission from Eu 3+ and bright blue emission from Eu 2+ , which can be seen under daylight conditions with the naked eye. Furthermore, the existence of Eu-containing phases is confirmed by high-resolution X-ray diffraction spectroscopy (XRD). The stoichiometry of the films is analyzed by Rutherford backscattering spectrometry (RBS) and elastic recoil detection analysis (ERDA). The optical constants and thickness of the films are analyzed by variable angle spectroscopic ellipsometry (VASE). This work highlights the tunable luminescence property of Eu doped SiO x N y thin films, making them promising candidates in light emission systems for optoelectronic platforms. Acknowledgements: This work is funded by NSERC Discovery Grant RGPIN-2019-06023 and ORF Grant ORF-RE 09-051. References Wang Z, Abbasi A, Dave U, et al., Laser Photon Rev . 2017;11(4). doi:10.1002/lpor.201700063 Germer S, Cherkouk C, Rebohle L, Helm M, Skorupa W., SPIE 8767, Integrated Photonics: Materials, Devices, and Applications II . 2013;8767:1-13. doi:10.1117/12.2017275 Tian Y, Chen B, Hua R, et al., J. Appl. Phys . 2011; 109 (5): 53511. doi:10.1063/1.3551584 Tian Y, Chen B, Hua R, et al., Cryst. Eng. Comm . 2012; 14 (5): 1760-1769. doi:10.1039/C1CE06232H Lin Z, Huang R, Wang H, et al., J. Alloys Compd . 2017; 694: 946-951. doi:10.1016/j.jallcom.2016.10.132 Azmi F, Gao Y, Khatami Z, Mascher P., J. Vac. Sci. Technol. A 2022; (043402). doi:10.1116/6.0001761 Bellocchi G, Franzò G, Iacona F, et al., Opt. Express . 2012; 20 (5): 5501-5507. doi:10.1364/OE.20.005501
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (18) , 1220
Fabrication of Thickness Modulated Multilayer Thin Film Optical Filters for Color Rendering in Photovoltaics Using Ecr-PECVD and Magnetron Sputtering
Electric vehicles’ usage can reduce greenhouse gas emissions and their adverse health effects on humans. But we can only utilize the full environmental benefits of them when charging is done using renewable energy sources with zero or low carbon emissions. Researchers have suggested integrating low-cost, flexible, and thin-film copper indium gallium selenide solar cells directly onto all the upward-facing body parts of electric vehicles [1]. However, this integration comes with an aesthetic drawback. We are proposing replacing the anti-reflective coating present in standard solar cells with a notch filter (a narrow high-reflection region in the visible range along with high transmission for the rest of the solar spectrum) to give a distinct color rendering to solar-charged electric vehicles. Notch filters can be designed using a rugate filter structure consisting of continuously modulated refractive indices or using a repetitive two-material stack of alternating high (H) and low (L) refractive index materials with precise thickness, also known as the standard two-material technology (S2MT). Using OptiLayer and MATLAB, we designed our S2MT thickness modulated structures to obtain blue (400 nm), green (550 nm), and red (632 nm) colors with minimum number of layers. Layer numbers in each design range between 2 – 12 depending on the chosen material pair and the targeted color, thus achieving simplicity and effectiveness. We used gradual evolution method followed by thin layer removal to obtain our thickness modulated multilayer optical filter designs. We simulated our optical filter structures for various high and low refractive index material pairs, and a detailed analysis of our findings will be presented. In this analysis, we studied the effect of refractive index ratios (high refractive index to low refractive index) on the current response of the colorful solar cells and our merit function. This study helped us to understand the optimal material pair range suitable to our application. Our designs were fabricated using magnetron sputtering and electron cyclotron resonance plasma-enhanced chemical vapor deposition (ECR-PECVD) and validated through variable angle spectroscopic ellipsometry and reflectance spectroscopy, showing strong agreement with our simulations. We fabricated these optical filters with three different material pairs using ECR-PECVD (SiN-SiON, refractive index ratio of 1.38 [2]) and magnetron sputtering (Nb2O5-SiO2, with refractive index ratio of 1.71 [3] and Al2O3-SiO2, with a refractive index ratio of 1.21). With a minimal trade-off in the functionality and efficiency of solar cells, we were successfully able to transform standard solar cells into aesthetically pleasing components, broadening their appeal and potential applications in consumer products. A detailed comparison of our simulation and fabrication results will be presented. Figure 1: Observed color of the fabricated (a) blue, (b) green, and (c) red filter on silicon wafer using a solar simulator under 1 sun condition. [3] References: [1] M. H. Mobarak, R. N. Kleiman, and J. Bauman, “Solar-Charged Electric Vehicles: A Comprehensive Analysis of Grid, Driver, and Environmental Benefits,” IEEE Transactions on Transportation Electrification , vol. 7, no. 2, pp. 579–603, Jun. 2021, doi: 10.1109/TTE.2020.2996363. [2] P. Bhattacharyya, B. Ahammou, F. Azmi, R. Kleiman, and P. Mascher, “Design and fabrication of color-generating nitride based thin-film optical filters for photovoltaic applications,” Journal of Vacuum Science & Technology A , vol. 41, no. 3, May 2023, doi: 10.1116/6.0002357. [3] P. Bhattacharyya et al. , “Design method for generating multiple colors with thickness-modulated thin-film optical filters for silicon solar cells,” Journal of Vacuum Science & Technology A , vol. 43, no. 1, Jan. 2025, doi: 10.1116/6.0003977. Figure 1
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (18) , 1220
Fabrication of Thickness Modulated Multilayer Thin Film Optical Filters for Color Rendering in Photovoltaics Using Ecr-PECVD and Magnetron Sputtering
Electric vehicles’ usage can reduce greenhouse gas emissions and their adverse health effects on humans. But we can only utilize the full environmental benefits of them when charging is done using renewable energy sources with zero or low carbon emissions. Researchers have suggested integrating low-cost, flexible, and thin-film copper indium gallium selenide solar cells directly onto all the upward-facing body parts of electric vehicles [1]. However, this integration comes with an aesthetic drawback. We are proposing replacing the anti-reflective coating present in standard solar cells with a notch filter (a narrow high-reflection region in the visible range along with high transmission for the rest of the solar spectrum) to give a distinct color rendering to solar-charged electric vehicles. Notch filters can be designed using a rugate filter structure consisting of continuously modulated refractive indices or using a repetitive two-material stack of alternating high (H) and low (L) refractive index materials with precise thickness, also known as the standard two-material technology (S2MT). Using OptiLayer and MATLAB, we designed our S2MT thickness modulated structures to obtain blue (400 nm), green (550 nm), and red (632 nm) colors with minimum number of layers. Layer numbers in each design range between 2 – 12 depending on the chosen material pair and the targeted color, thus achieving simplicity and effectiveness. We used gradual evolution method followed by thin layer removal to obtain our thickness modulated multilayer optical filter designs. We simulated our optical filter structures for various high and low refractive index material pairs, and a detailed analysis of our findings will be presented. In this analysis, we studied the effect of refractive index ratios (high refractive index to low refractive index) on the current response of the colorful solar cells and our merit function. This study helped us to understand the optimal material pair range suitable to our application. Our designs were fabricated using magnetron sputtering and electron cyclotron resonance plasma-enhanced chemical vapor deposition (ECR-PECVD) and validated through variable angle spectroscopic ellipsometry and reflectance spectroscopy, showing strong agreement with our simulations. We fabricated these optical filters with three different material pairs using ECR-PECVD (SiN-SiON, refractive index ratio of 1.38 [2]) and magnetron sputtering (Nb2O5-SiO2, with refractive index ratio of 1.71 [3] and Al2O3-SiO2, with a refractive index ratio of 1.21). With a minimal trade-off in the functionality and efficiency of solar cells, we were successfully able to transform standard solar cells into aesthetically pleasing components, broadening their appeal and potential applications in consumer products. A detailed comparison of our simulation and fabrication results will be presented. Figure 1: Observed color of the fabricated (a) blue, (b) green, and (c) red filter on silicon wafer using a solar simulator under 1 sun condition. [3] References: [1] M. H. Mobarak, R. N. Kleiman, and J. Bauman, “Solar-Charged Electric Vehicles: A Comprehensive Analysis of Grid, Driver, and Environmental Benefits,” IEEE Transactions on Transportation Electrification , vol. 7, no. 2, pp. 579–603, Jun. 2021, doi: 10.1109/TTE.2020.2996363. [2] P. Bhattacharyya, B. Ahammou, F. Azmi, R. Kleiman, and P. Mascher, “Design and fabrication of color-generating nitride based thin-film optical filters for photovoltaic applications,” Journal of Vacuum Science & Technology A , vol. 41, no. 3, May 2023, doi: 10.1116/6.0002357. [3] P. Bhattacharyya et al. , “Design method for generating multiple colors with thickness-modulated thin-film optical filters for silicon solar cells,” Journal of Vacuum Science & Technology A , vol. 43, no. 1, Jan. 2025, doi: 10.1116/6.0003977. Figure 1
- Open Access
- 6 May 2025
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 40 (5) , 055010
Investigation of terbium-doped silicon oxide thin films: comparison of TEM images prepared by FIB and mechanical methods
This study characterizes the optical and structural properties of terbium-doped oxygen-rich silicon oxide (ORSO:Tb) thin films and investigates focused ion beam (FIB)-induced damage on transmission electron microscopy (TEM) lamellae prepared from these films. While there are significant advantages to the FIB technique, there is a potential that energetic ions used during the FIB process can damage the lamellae. A comparative analysis of TEM images obtained using FIB and conventional mechanical preparation methods was performed. The results indicate that TEM images of FIB-prepared lamellae exhibit higher resolution, allowing for a more detailed examination of nanocrystal structures and quantum dots. In contrast, the lack of sufficient clarity of the mechanically prepared TEM images reduces the number of nanocrystals visible in the field of view, resulting in a less effective and detailed study of the thinned films. We found no evidence of Ga implantation or mixing into the thinned film, and no observable FIB-induced damage such as recrystallization, or amorphization. Photoluminescence spectra exhibited red and blue shifts with increasing annealing temperature at blue and green emissions, respectively. X-ray diffraction patterns verify that the formation of crystalline nanostructures begins at 1100 °C, and at least at 1200 °C, two phases of Tb4Si3(SiO4)O10 and Tb2O3 in the sample are recognized.
- 6 May 2025
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 40 (5) , 055010
Open AccessInvestigation of terbium-doped silicon oxide thin films: comparison of TEM images prepared by FIB and mechanical methods
This study characterizes the optical and structural properties of terbium-doped oxygen-rich silicon oxide (ORSO:Tb) thin films and investigates focused ion beam (FIB)-induced damage on transmission electron microscopy (TEM) lamellae prepared from these films. While there are significant advantages to the FIB technique, there is a potential that energetic ions used during the FIB process can damage the lamellae. A comparative analysis of TEM images obtained using FIB and conventional mechanical preparation methods was performed. The results indicate that TEM images of FIB-prepared lamellae exhibit higher resolution, allowing for a more detailed examination of nanocrystal structures and quantum dots. In contrast, the lack of sufficient clarity of the mechanically prepared TEM images reduces the number of nanocrystals visible in the field of view, resulting in a less effective and detailed study of the thinned films. We found no evidence of Ga implantation or mixing into the thinned film, and no observable FIB-induced damage such as recrystallization, or amorphization. Photoluminescence spectra exhibited red and blue shifts with increasing annealing temperature at blue and green emissions, respectively. X-ray diffraction patterns verify that the formation of crystalline nanostructures begins at 1100 °C, and at least at 1200 °C, two phases of Tb4Si3(SiO4)O10 and Tb2O3 in the sample are recognized.
- Open Access
- 1 April 2025
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 14 (4) , 043003
Optical and Mechanical Properties of Europium-Doped Silicon Nitride Thin Films Deposited by ECR-PECVD with Magnetron Sputtering
Optical and mechanical properties of europium (Eu)-doped silicon nitride (SixNy) films were investigated as a function of the sputtering power applied to the Eu metal target and argon flow into the deposition chamber. Films were fabricated by an electron cyclotron resonance plasma-enhanced chemical vapor deposition (ECR-PECVD) system combined with magnetron sputtering for in situ rare-Earth doping. Results show that Eu-doped SixNy films fabricated with higher sputtering power exhibit intense red emission when annealed above 1000 °C, making the luminescence visible under daylight conditions. Variable-angle spectroscopic ellipsometry analysis shows that the refractive index and film thickness are strongly dependent on the sputtering power; however, argon (Ar) flow has minimal influence. High-resolution X-ray diffraction reveals that the crystalline phases in the films play a crucial role in efficient Eu emission. Additionally, the films show increased hardness, up to 18 GPa, and an elastic modulus of 160 GPa, ensuring their durability and performance as cladding layers in photonic devices. These mechanical properties are essential for maintaining structural integrity and preventing defects, which are critical for the reliability of optoelectronic devices. The combination of strong emissions and good mechanical properties make Eu-doped SixNy films suitable for optoelectronic and solar cell applications, where both efficient light emission and material stability are essential.
- 1 April 2025
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 14 (4) , 043003
Open AccessOptical and Mechanical Properties of Europium-Doped Silicon Nitride Thin Films Deposited by ECR-PECVD with Magnetron Sputtering
Optical and mechanical properties of europium (Eu)-doped silicon nitride (SixNy) films were investigated as a function of the sputtering power applied to the Eu metal target and argon flow into the deposition chamber. Films were fabricated by an electron cyclotron resonance plasma-enhanced chemical vapor deposition (ECR-PECVD) system combined with magnetron sputtering for in situ rare-Earth doping. Results show that Eu-doped SixNy films fabricated with higher sputtering power exhibit intense red emission when annealed above 1000 °C, making the luminescence visible under daylight conditions. Variable-angle spectroscopic ellipsometry analysis shows that the refractive index and film thickness are strongly dependent on the sputtering power; however, argon (Ar) flow has minimal influence. High-resolution X-ray diffraction reveals that the crystalline phases in the films play a crucial role in efficient Eu emission. Additionally, the films show increased hardness, up to 18 GPa, and an elastic modulus of 160 GPa, ensuring their durability and performance as cladding layers in photonic devices. These mechanical properties are essential for maintaining structural integrity and preventing defects, which are critical for the reliability of optoelectronic devices. The combination of strong emissions and good mechanical properties make Eu-doped SixNy films suitable for optoelectronic and solar cell applications, where both efficient light emission and material stability are essential.
- 5 December 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (1)
Design method for generating multiple colors with thickness-modulated thin-film optical filters for silicon solar cells
This study explores an innovative approach to enhance the esthetic appeal while having minimal impact on the functional performance of solar-charged electric vehicles. We propose replacing the standard antireflective coating on solar cells with a custom-designed notch filter. This optical filter ensures high transmission across the solar spectrum and creates a distinct color rendering effect in the visible range, thereby making the cells more visually appealing. We utilized niobium pentoxide and silicon dioxide for their excellent optical, mechanical, and corrosive properties to fabricate filters reflecting at specific wavelengths, producing vibrant blue, green, and red color renderings at 400, 550, and 632 nm, respectively. Theoretical relative photocurrent density losses of only ∼7%,∼10%, and ∼14% were observed for blue, green, and red colors, respectively, due to the presence of these filters when compared to a silicon solar cell with a standard antireflective coating. Using optilayer and matlab software, we precisely designed filters with just two to four layers, achieving simplicity and effectiveness. Gradual evolution optimization followed by thin layer removal optimization produced automated and consistent thickness-modulated multilayered optical filter designs over a wide range of user inputs. Our designs were fabricated using magnetron sputtering and validated through variable angle spectroscopic ellipsometry and reflectance spectroscopy, showing strong agreement with our simulations. With a minimal trade-off in the functionality and efficiency of solar cells, this method transforms standard solar cells into esthetically pleasing components, broadening their appeal and potential applications in consumer products.
- 5 December 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (1)
Design method for generating multiple colors with thickness-modulated thin-film optical filters for silicon solar cells
This study explores an innovative approach to enhance the esthetic appeal while having minimal impact on the functional performance of solar-charged electric vehicles. We propose replacing the standard antireflective coating on solar cells with a custom-designed notch filter. This optical filter ensures high transmission across the solar spectrum and creates a distinct color rendering effect in the visible range, thereby making the cells more visually appealing. We utilized niobium pentoxide and silicon dioxide for their excellent optical, mechanical, and corrosive properties to fabricate filters reflecting at specific wavelengths, producing vibrant blue, green, and red color renderings at 400, 550, and 632 nm, respectively. Theoretical relative photocurrent density losses of only ∼7%,∼10%, and ∼14% were observed for blue, green, and red colors, respectively, due to the presence of these filters when compared to a silicon solar cell with a standard antireflective coating. Using optilayer and matlab software, we precisely designed filters with just two to four layers, achieving simplicity and effectiveness. Gradual evolution optimization followed by thin layer removal optimization produced automated and consistent thickness-modulated multilayered optical filter designs over a wide range of user inputs. Our designs were fabricated using magnetron sputtering and validated through variable angle spectroscopic ellipsometry and reflectance spectroscopy, showing strong agreement with our simulations. With a minimal trade-off in the functionality and efficiency of solar cells, this method transforms standard solar cells into esthetically pleasing components, broadening their appeal and potential applications in consumer products.
- Open Access
- 20 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 16 (6) , 1-15
A Moderate Confinement O-, S-, C-, and L-Band Silicon Nitride Platform Enabled by a Rapid Prototyping Integrated Photonics Foundry Process
We describe a rapid prototyping process for silicon nitride photonic integrated circuits operating at wavelengths around 1.3 and 1.5 μm. Moderate confinement silicon nitride waveguides and other essential integrated photonic components, such as fiber-chip couplers, microring resonators, multimode interference-based 3-dB power splitters, and subwavelength grating metamaterial waveguides, were fabricated and characterized and are reported. The prototyping platform features a 400-nm-thick layer of silicon nitride grown via low-pressure chemical vapour deposition onto 4” silicon thermal oxide wafers and uses direct-write electron beam lithography to define single mode waveguide structures that exhibit losses of < 1.3 dB/cm across the O-band (1260–1360 nm), < 1.8 dB/cm across the S-band (1460–1530 nm), < 1.6 dB/cm across the C-band (1530–1565 nm), and < 0.7 dB/cm across the L-band (1565–1625 nm) for both transverse electric (TE) and transverse magnetic (TM) polarizations. The reported components were compiled into a process design kit to accompany the platform, which is commercially available through the NanoSOI Design Center operated by Applied Nanotools Inc. with five multi-project wafer runs per year that have fast turnaround times on the scale of weeks rather than months. This provides a route toward the rapid fabrication of silicon nitride chip-based passive and thermo-optic active photonic devices with critical resolution down to 120 nm, making it an attractive solution for entry-level designers, device innovators, and small companies looking to incorporate integrated silicon nitride circuits into early-stage applications of silicon photonics.
- 20 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 16 (6) , 1-15
Open AccessA Moderate Confinement O-, S-, C-, and L-Band Silicon Nitride Platform Enabled by a Rapid Prototyping Integrated Photonics Foundry Process
We describe a rapid prototyping process for silicon nitride photonic integrated circuits operating at wavelengths around 1.3 and 1.5 μm. Moderate confinement silicon nitride waveguides and other essential integrated photonic components, such as fiber-chip couplers, microring resonators, multimode interference-based 3-dB power splitters, and subwavelength grating metamaterial waveguides, were fabricated and characterized and are reported. The prototyping platform features a 400-nm-thick layer of silicon nitride grown via low-pressure chemical vapour deposition onto 4” silicon thermal oxide wafers and uses direct-write electron beam lithography to define single mode waveguide structures that exhibit losses of < 1.3 dB/cm across the O-band (1260–1360 nm), < 1.8 dB/cm across the S-band (1460–1530 nm), < 1.6 dB/cm across the C-band (1530–1565 nm), and < 0.7 dB/cm across the L-band (1565–1625 nm) for both transverse electric (TE) and transverse magnetic (TM) polarizations. The reported components were compiled into a process design kit to accompany the platform, which is commercially available through the NanoSOI Design Center operated by Applied Nanotools Inc. with five multi-project wafer runs per year that have fast turnaround times on the scale of weeks rather than months. This provides a route toward the rapid fabrication of silicon nitride chip-based passive and thermo-optic active photonic devices with critical resolution down to 120 nm, making it an attractive solution for entry-level designers, device innovators, and small companies looking to incorporate integrated silicon nitride circuits into early-stage applications of silicon photonics.