Kongkham Nomita Devi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Kongkham Nomita Devi has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
K. Jugeshwar Singh
9 shared publicationsH. Nandakumar Sarma
Manipur University
3 shared publicationsL. Anju Chanu
3 shared publicationsSh. Anju Devi
3 shared publicationsW. Joychandra Singh
Department of Physics, Manipur University, Canchipur, India
3 shared publicationsK Jugeshwar Singh
Indian Inst Sci, Talent Dev Ctr, Challakere 577536, Karnataka, India
2 shared publications
Latest Publications
- 9 January 2026
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 352
MOF-derived ZnO/CuO nanocomposite for efficient degradation of imidacloprid and its degradation pathway evaluation
- 9 January 2026
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 352
MOF-derived ZnO/CuO nanocomposite for efficient degradation of imidacloprid and its degradation pathway evaluation
- 30 December 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (1) , 0159a6
Role of doping level, electric field and temperature on the charge transport properties of electrochemically polymerized poly(3-butylthiophene) and poly(3-hexylthiophene) devices
In this article, the charge transport properties of electrochemically polymerized poly(3-butylthiophene) (P3BT) and poly(3-hexylthiophene) (P3HT) devices using a sandwiched metal/polymer/metal structure are explored. These devices are successfully fabricated at different doping levels using electrochemical polymerization and thermal evaporation techniques. Low temperature-dependent Current–Voltage (I-V) measurement reveals that space charge limited conduction (SCLC) mechanism with a field and temperature-dependent mobility in the form of the Poole–Frenkel model governs the transport mechanism. The zero-field dependent mobility exhibits a thermally activated behavior, with two activation processes observed- one at higher and another at lower temperatures. The activation energy increases with the decrease in doping level at higher temperature regions, indicating the significant role of doping level in the activation process. However, electric field plays a significant role in the transport mechanism at lower temperatures. Comparatively, P3HT devices exhibit lower conductivity and mobility values than P3BT devices. The mobility ratio μ 0,300 K μ 0,50 K for P3HT devices is considerably larger than that for P3BT devices. Additionally, the activation energy of P3HT devices is higher, providing evidence of a higher relative energetic disorder than P3BT devices.
- 30 December 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (1) , 0159a6
Role of doping level, electric field and temperature on the charge transport properties of electrochemically polymerized poly(3-butylthiophene) and poly(3-hexylthiophene) devices
In this article, the charge transport properties of electrochemically polymerized poly(3-butylthiophene) (P3BT) and poly(3-hexylthiophene) (P3HT) devices using a sandwiched metal/polymer/metal structure are explored. These devices are successfully fabricated at different doping levels using electrochemical polymerization and thermal evaporation techniques. Low temperature-dependent Current–Voltage (I-V) measurement reveals that space charge limited conduction (SCLC) mechanism with a field and temperature-dependent mobility in the form of the Poole–Frenkel model governs the transport mechanism. The zero-field dependent mobility exhibits a thermally activated behavior, with two activation processes observed- one at higher and another at lower temperatures. The activation energy increases with the decrease in doping level at higher temperature regions, indicating the significant role of doping level in the activation process. However, electric field plays a significant role in the transport mechanism at lower temperatures. Comparatively, P3HT devices exhibit lower conductivity and mobility values than P3BT devices. The mobility ratio μ 0,300 K μ 0,50 K for P3HT devices is considerably larger than that for P3BT devices. Additionally, the activation energy of P3HT devices is higher, providing evidence of a higher relative energetic disorder than P3BT devices.
- 15 October 2023
- Published by Wiley in Physica Status Solidi (a)
- Vol. 220 (21)
Dielectric Relaxation Behavior and Electrical Conduction Mechanism of PVA/ZnO Nanocomposites for Flexible Electronic Device Application
Transport properties of polyvinyl alcohol/ZnO nanocomposites (PVA/ZnO) of varying ZnO nanofiller are studied focussing on their potential application in electronic device application. The structural, morphological, and elemental composition studies of the prepared samples are done by X‐ray diffraction (XRD), scanning electron microscope (SEM), and energy‐dispersive X‐ray analysis (EDX). XRD confirms the formation of nanocomposites. SEM image shows the dispersion of ZnO nanoparticles on the surface of PVA matrix. EDX verifies that no external impurities are present in the nanocomposite samples. Frequency‐ and temperature‐dependent dielectric measurement of the samples reveals maximum dielectric constant at PVA/15 wt% ZnO nanocomposite. Dielectric loss results show a lossless behavior at higher frequencies (<0.2), indicating their suitability for high‐frequency applications. The AC conductivity studies reveal that electrical conduction mechanism in the nanocomposites is governed by the correlated barrier hopping mechanism. Activation energy of the samples reveals the presence of two thermally activated transport mechanism above and below 353 K. The imaginary part of electric modulus with frequency shows a single relaxation peak indicating the transition from long‐range to short‐range mobility with increasing frequency and temperature above 353 K. The contribution of grain and grain boundary in the electrical conduction process is confirmed from the Nyquist plot.
- 15 October 2023
- Published by Wiley in Physica Status Solidi (a)
- Vol. 220 (21)
Dielectric Relaxation Behavior and Electrical Conduction Mechanism of PVA/ZnO Nanocomposites for Flexible Electronic Device Application
Transport properties of polyvinyl alcohol/ZnO nanocomposites (PVA/ZnO) of varying ZnO nanofiller are studied focussing on their potential application in electronic device application. The structural, morphological, and elemental composition studies of the prepared samples are done by X‐ray diffraction (XRD), scanning electron microscope (SEM), and energy‐dispersive X‐ray analysis (EDX). XRD confirms the formation of nanocomposites. SEM image shows the dispersion of ZnO nanoparticles on the surface of PVA matrix. EDX verifies that no external impurities are present in the nanocomposite samples. Frequency‐ and temperature‐dependent dielectric measurement of the samples reveals maximum dielectric constant at PVA/15 wt% ZnO nanocomposite. Dielectric loss results show a lossless behavior at higher frequencies (<0.2), indicating their suitability for high‐frequency applications. The AC conductivity studies reveal that electrical conduction mechanism in the nanocomposites is governed by the correlated barrier hopping mechanism. Activation energy of the samples reveals the presence of two thermally activated transport mechanism above and below 353 K. The imaginary part of electric modulus with frequency shows a single relaxation peak indicating the transition from long‐range to short‐range mobility with increasing frequency and temperature above 353 K. The contribution of grain and grain boundary in the electrical conduction process is confirmed from the Nyquist plot.
- 17 August 2023
- Published by Springer Nature in Polymer Bulletin
- Vol. 81 (6) , 5069-5091
Investigation on the optical and transport properties of PVA/Ag incorporated ZnO nanocomposites for optoelectronic and electronic device application
- 17 August 2023
- Published by Springer Nature in Polymer Bulletin
- Vol. 81 (6) , 5069-5091
Investigation on the optical and transport properties of PVA/Ag incorporated ZnO nanocomposites for optoelectronic and electronic device application
- 26 April 2023
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 303
Intrinsic defect enhanced photocatalytic activity of Gd3+ doped ZnO nanoparticles
- 26 April 2023
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 303
Intrinsic defect enhanced photocatalytic activity of Gd3+ doped ZnO nanoparticles
- 28 November 2022
- Published by Springer Nature in Journal of Materials Research
- Vol. 38 (2) , 473-483
Operational parameters and major active species responsible for the photodegradation of malachite green dye by ZnO/ZnS core–shell nanocomposite photocatalyst
- 28 November 2022
- Published by Springer Nature in Journal of Materials Research
- Vol. 38 (2) , 473-483
Operational parameters and major active species responsible for the photodegradation of malachite green dye by ZnO/ZnS core–shell nanocomposite photocatalyst
- 9 March 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (7) , 8733-8745
Nickel doped zinc oxide with improved photocatalytic activity for Malachite Green Dye degradation and parameters affecting the degradation
- 9 March 2021
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 32 (7) , 8733-8745
Nickel doped zinc oxide with improved photocatalytic activity for Malachite Green Dye degradation and parameters affecting the degradation
- 9 February 2020
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 205 (1) , 38-51
A Comparative Study on the Photocatalytic Activity of Eucalyptus Leaf Assisted Green Synthesized ZnO and Chemically Synthesized ZnO towards the Degradation of Malachite Green Dye
The photocatalytic activities of ZnO nanoparticles, synthesized by two methods, towards the degradation of Malachite green (MG) dye were studied and compared. Green synthesized ZnO nanoparticle was observed to be more effective in photodegradation and the effect of operating parameters such as catalyst loading, initial dye concentration and pH was investigated. Optimum condition was observed at catalyst load 0.24 g/L, initial dye concentration 20 ppm and pH nine which degrades 90% of the dye under 1 h of irradiation. X-ray diffraction (XRD), Scanning Electron Microscope (SEM), Energy Dispersive X-ray spectroscopy (EDX), UV-Vis spectroscopy and Fourier Transform Infrared spectroscopy(FTIR) were employed as characterization techniques for the samples.
- 9 February 2020
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 205 (1) , 38-51
A Comparative Study on the Photocatalytic Activity of Eucalyptus Leaf Assisted Green Synthesized ZnO and Chemically Synthesized ZnO towards the Degradation of Malachite Green Dye
The photocatalytic activities of ZnO nanoparticles, synthesized by two methods, towards the degradation of Malachite green (MG) dye were studied and compared. Green synthesized ZnO nanoparticle was observed to be more effective in photodegradation and the effect of operating parameters such as catalyst loading, initial dye concentration and pH was investigated. Optimum condition was observed at catalyst load 0.24 g/L, initial dye concentration 20 ppm and pH nine which degrades 90% of the dye under 1 h of irradiation. X-ray diffraction (XRD), Scanning Electron Microscope (SEM), Energy Dispersive X-ray spectroscopy (EDX), UV-Vis spectroscopy and Fourier Transform Infrared spectroscopy(FTIR) were employed as characterization techniques for the samples.
- 2 January 2020
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 204 (1) , 90-99
Study on the Photocatalytic Activity of Metal Oxide Nanoparticles towards the Degradation of Some Organic Dyes
The present study involves the successful synthesis of zinc oxide and tin oxide nanoparticles by green and chemical co-precipitation methods respectively. The synthesized samples were characterized by X-ray diffraction (XRD) and UV-visible absorption techniques. XRD analysis confirms the formation of hexagonal wurtzite structure of ZnO and pure cassiterite rutile tetragonal phase of SnO2. UV-visible spectroscopic study confirms the absorption of UV light by samples. The photocatalytic activities of both samples on Methylene blue (MB) and Malachite green (MG) dyes were analyzed and their corresponding kinetic modelings were studied. It is observed that SnO2 shows better degradation activity compared to ZnO.
- 2 January 2020
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 204 (1) , 90-99
Study on the Photocatalytic Activity of Metal Oxide Nanoparticles towards the Degradation of Some Organic Dyes
The present study involves the successful synthesis of zinc oxide and tin oxide nanoparticles by green and chemical co-precipitation methods respectively. The synthesized samples were characterized by X-ray diffraction (XRD) and UV-visible absorption techniques. XRD analysis confirms the formation of hexagonal wurtzite structure of ZnO and pure cassiterite rutile tetragonal phase of SnO2. UV-visible spectroscopic study confirms the absorption of UV light by samples. The photocatalytic activities of both samples on Methylene blue (MB) and Malachite green (MG) dyes were analyzed and their corresponding kinetic modelings were studied. It is observed that SnO2 shows better degradation activity compared to ZnO.