MBMaría Concepción Barrera

María Concepción Barrera

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


María Concepción Barrera has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Increasing SBA-15 Amphoteric Properties by Direct Zr Addition During Synthesis

    by Romeo Hernández, José Escobar, José G. Pacheco, José G. Torres, David S. García, Zenaida Guerra, Paz del Ángel, María C. Barrera, Durvel de la Cruz

    Strategies followed to improve SBA-15 surface (essentially inert) included modifications by adding acidic or basic (or both) species during or after silica synthesis. Amphoteric properties are especially important, as some reactions (alcohol dehydration, for instance) require both types of sites to efficiently take place. In this work, single Zr (nominal 3, 5, and 10 wt%, as ZrOCl2•8H2O) direct addition during SBA-15 synthesis was used to impart amphoteric characteristics (as determined by NH3 and CO2 TPD) to mesostructured SiO2 matrices. Additional materials characterization included textural (N2 physisorption) and structural (XRD, FTIR, and UV–Vis spectroscopies, and HRTEM as well) studies. Actual solids composition was also determined (EDS). The degree of Zr incorporation into mesoporous silica was enhanced with nominal content in binary formulations, although not necessarily integrated into SBA-15 walls forming Zr-O-Si linkages. It seemed that single ZrO2 domains (framework and extra-framework) could provide suitable amphoteric properties by significantly increasing the number and strength of both acid and basic sites (especially formulations containing nominal 5 wt% Zr), as to those over mesostructured silica matrices. Also, potentially deleterious strong acid sites were avoided. The binary oxides present great potential to be applied in reactions requiring vicinal acid–base pairs (alcohol dehydration, for instance).


  • Open Access

    Increasing SBA-15 Amphoteric Properties by Direct Zr Addition During Synthesis

    by Romeo Hernández-Morales, José Escobar, José Guadalupe Pacheco-Sosa, José Gilberto Torres-Torres, David S. García-Zaleta, Zenaida Guerra-Que, Paz Del Angel Vicente, María C. Barrera, Durvel de la Cruz-Romero

    Strategies followed to improve SBA-15 surface (essentially inert) included modifications by adding acidic or basic (or both) species during or after silica synthesis. Amphoteric properties are especially important as some reactions (alcohols dehydrations, for instance) require of both type of sites to efficiently take place. In this work, single Zr (nominal 3, 5 and 10 wt%, as ZrOCl2•8H2O) direct addition during SBA-15 synthesis was used to impart amphoteric characteristics (as determined by NH3 and CO2 TPD) to mesostructured SiO2 matrices. Additional materials characterization included textural (N2 physisorption) and structural (XRD, FTIR and UV-vis spectroscopies, and HRTEM as well) studies. Actual solids composition was also determined (EDS). Degree of Zr incorporation to mesoporous silica was enhanced with nominal content in binary formulations, although not necessarily integrated in SBA-15 walls forming Zr-O-Si linkages. It seemed that single ZrO2 domains (framework and extra-framework) could provide suitable amphoteric properties by significantly increasing number and strength of both acid and basic sites (especially formulation containing nominal 5 wt% Zr), as to those over mesostructured silica matrices. Also, potentially deleterious strong acid sites were avoided. The binary oxides present great potential to be applied in reactions requiring vicinal acid-basic pairs (alcohols dehydration, for instance).

  • Open Access

    La-Modified SBA-15 Prepared by Direct Synthesis: Importance of Determining Actual Composition

    by Gloribel Morales Hernández, José Escobar, José G. Pacheco Sosa, Mario A. Guzmán Cruz, José G. Torres Torres, Paz del Ángel Vicente, María C. Barrera, Carlos E. Santolalla Vargas, Hermicenda Pérez Vidal

    Lanthanum (La) integration (at various nominal contents) in SBA-15 prepared under acidic medium was intended from corresponding direct nitrate addition during mesoporous silica formation. Materials were impregnated with Pt (1.5 wt%) and studied through several textural (N2 physisorption), structural (XRD, TG-DTG), and surface (FTIR, STEM-HAADF, SEM-EDS, NH3, and CO2 TPD) instrumental techniques. Pt-impregnated solids were tested in phenol hydrodeoxygenation (HDO, T = 250 °C, 3.2 MPa, batch reactor, n-decane as solvent). Catalytic activity (in pseudo-first-order kinetic constant, kHDO basis) was not directly related to Pt dispersion, which was not determined by nominal rare earth content. Determining the actual composition of modified SBA-15 materials is crucial in reaching sound conclusions regarding their physicochemical properties, especially when La modifier is directly added during mesoporous matrix formation, where efficient interaction among constituents could be difficult to get. Otherwise, results from some characterization techniques (N2 physisorption and FTIR, for instance) could be misleading and even contradictory. Indeed, extant modifier precursors, when under SBA-15 synthesis conditions, could affect the properties of prepared materials even though they were absent in obtained formulations. Performing simple compositional analysis could eliminate uncertainties regarding the role of various modifiers on characteristics of final catalysts. However, several groups have failed in doing so.


  • Open Access

    La-Modified SBA-15 Prepared by Direct Synthesis: Importance of Determining Actual Composition

    by Gloribel Morales-Hernández, José Escobar, José Pacheco-Sosa, Mario A. Guzmán-Cruz, José G. Torres-Torres, Paz Del Angel-Vicente, María C. Barrera, Carlos E. Santolalla-Vargas, Hermicenda Pérez-Vidal

    La integration (at various nominal contents) in SBA-15 prepared under acidic medium was intended from corresponding direct nitrate addition during mesoporous silica formation. Materials were impregnated with Pt (1.5 w%) and studied through several textural (N2 physisorption), structural (XRD, TG-DTG) and surface (FTIR, STEM-HAADF, SEM-EDS, NH3 and CO2 TPD) instrumental techniques. Pt-impregnated solids were tested in phenol hydrodeoxygenation (HDO, T=250 °C, 3.2 MPa, batch reactor, n-decane as solvent). Catalytic activity (in pseudo first order kinetic constant, kHDO basis) was related to Pt dispersion which was, however, not determined by nominal rare earth content. Determining actual composition of modified SBA-15 materials is crucial in reaching sound conclusions regarding their physicochemical properties, especially when La modifier is directly added during mesoporous matrices formation where efficient interaction among constituents could be difficult to get. Otherwise, results from some characterization techniques (N2 physisorption and FTIR, for instance) could be misleading and even contradictory. Indeed, extant modifier precursors when under SBA-15 synthesis conditions could affect the properties of prepared materials even though they were absent in obtained| formulations. Performing a simple compositional analysis could eliminate uncertainties regarding the role of various modifiers on characteristics of final catalysts. However, several groups have failed in doing so.


  • Open Access

    Photocatalytic Degradation of Methylene Blue by Magnetic Opal/Fe3O4 Colloidal Crystals under Visible Light Irradiation

    by Abraham Jorge Carmona-Carmona, Enrique Sánchez Mora, Jesús Ivan Peña Flores, César Márquez-Beltrán, María Dolores Castañeda-Antonio, Marlén Alexis González-Reyna, María Concepción Barrera, Khashayar Misaghian, Jesús Eduardo Lugo, Miller Toledo-Solano

    In this study, opal–magnetite photocatalysts based on SiO2 artificial opal crystals infiltrated with different concentrations of Fe3O4 nanoparticles (NPs) were synthesized using a combination of lateral infiltration and co-assembly methods. By adjusting the concentration of Fe3O4 NPs in the SiO2 opal crystal, the energy band gap (Eg) was tuned to enable efficient degradation of methylene blue (MB) under visible light (410 nm and 575 nm). The photocatalytic process involved two stages: MB adsorption on the surface due to charge differences in the composite film and subsequent degradation through oxidative radicals on the catalyst’s surface. The developed material exhibited potential for applications in water remediation.


  • Open Access

    Dibenzothiophene Hydrodesulfurization over P-CoMo on Sol-Gel Alumina Modified by La Addition. Effect of Rare-Earth Content

    by José Escobar, María C. Barrera, Jaime S. Valente, Dora A. Solís-Casados, Víctor Santes, José E. Terrazas, Benoit A.R. Fouconnier

    Alumina-lanthana (La at 1, 3, or 5 wt%) supports were prepared by sol-gel from Al alkoxide sol where La(NO3)3 was added. Annealed (550 °C) xerogels were characterized by N2 physisorption, thermal analysis (TG-DTA), X-ray diffraction (XRD), scanning electron microscopy- energy dispersive spectroscopy (SEM-EDS), CO2-adsorption studied in IR region, Raman and ultraviolet-vis (UV-vis) spectroscopies. The texture of amorphous binary matrices of high La dispersion was adequate to applications in catalysts for middle distillates hydrodesulfurization (HDS). Generally, the amount and strength of surface basic sites increased with La content in solids. Mo (at 2.8 at. nm−2) and Co (at Co/(Co+Mo) = 0.3) were deposited over carriers by one-pot simultaneous impregnation in the presence of PO43− (P2O5/(NiO+MoO3) = 0.2 mass ratio). Calcined (400 °C) Co-Mo-P impregnated precursors had decreased basicity as to that of corresponding carriers, suggesting strong La-deposited species interaction. As La content in carriers increased Mo=O Raman stretching vibrations shifted to lower wave-numbers (949 to 935 cm−1) suggesting octahedral molybdates coordination change to tetrahedral. Although La at the lowest concentration (1 wt%) enhanced dibenzothiophene, HDS (~38% higher as to the Al2O3-supported formulation) desulfurization was significantly diminished at augmented content. Presence of hardly sulfidable tetrahedral Mo originated during impregnation at basic conditions in pores of La-modified carriers seemed to dictate observed behavior. Rare earth content in formulations enhanced selectivity to biphenyl.


  • Effect of Chitosan Addition on NiMo/Al2O3 Catalysts for Dibenzothiophene Hydrodesulfurization

    by Guillermina Ríos-Caloch, Víctor Santes, José Escobar, Maiby Valle-Orta, María C. Barrera, Melissa Hernández-Barrera

    A series of supported NiMo catalysts were prepared by impregnating ammonium heptamolybdate and nickel nitrate (at 12 and 3 wt% of Mo and Ni, respectively) over chitosan (Chi) modified Al2O3 carrier. Alumina substrate was first impregnated with the organic additive (in acidic aqueous HNO3 solution, given the insolubility of chitosan at neutral pH) at concentrations corresponding to Chi/Ni mol ratios of 0.5, 1 and 2. Lower Mo dispersion in materials prepared over Chi-modified alumina was observed by Raman spectroscopy. Also, in those samples formation of hardly reducible aluminum molybdates (due to acidic conditions used during chitosan deposition) was evidenced by thermal analysis. Sulfided (under H2S/H2 flow, at 400 °C) catalysts were tested in dibenzothiophene hydrodesulfurization (HDS, at 72.4 kg/cm2, 320 °C, batch reactor, n-hexadecane as solvent) where no improved activity (in pseudo first order kinetic constant basis) was registered for chitosan-modified samples. However, increased selectivity to the product from direct desulfurization route (biphenyl) suggested enhanced promotion of MoS2 phase (by Ni) in catalysts prepared with organic additive. CO adsorption at -173 °C (followed by infrared spectroscopy) showed lower concentration of NiMoS active sites over catalysts prepared over chitosan-impregnated alumina carrier pointing out to the existence of highly efficient sites, in spite of their lower surface concentration. The present investigation opens the possibility of using chitosan, a sub-product from seafood industry, as efficient HDS catalyst additive.