Cuie Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Cuie Zheng has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Dajun Sun
8 shared publications- Dajun Sun
Harbin Engineering University
4 shared publications Yunfeng Han
Acoustic Science and Technology Laboratory, Harbin Engineering University, Harbin, China
3 shared publications- Chiyu Cheng
Harbin Engineering University
2 shared publications - Dajun Sun
National Key Laboratory of Underwater Acoustic Technology, Harbin Engineering University, Harbin 150001, China
2 shared publications - Heng Cai
Harbin Engineering University
2 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 51 (4) , 3796-3808
Robust Positioning Algorithm for Irregular Stereo Arrays With an Additional Bearing Constraint
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 51 (4) , 3796-3808
Robust Positioning Algorithm for Irregular Stereo Arrays With an Additional Bearing Constraint
- 4 June 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (26)
An acoustic positioning method for underwater vehicles in deep-sea LOS/NLOS mixed regions
In deep-sea navigation and observation missions, accurate navigation of underwater vehicles relies on deep-sea long baseline (LBL) acoustic positioning systems to provide reliable position calibration under line-of-sight (LOS) conditions. However, due to complex multipath propagation and array geometry, practical deep-sea operational environments commonly exhibit mixed observation conditions where LOS and non-line-of-sight (NLOS) acoustic paths coexist. The unobservable systematic ranging bias introduced by NLOS measurements significantly degrades the positioning calibration capability of LBL systems. To address this issue, a robust acoustic positioning method for deep-sea LOS/NLOS mixed environments is proposed. The method establishes an iterative reweighted least squares framework based on minimum solvable subsets (MSS) with a two-stage processing strategy. First, NLOS measurements are structurally identified and excluded through residual consistency tests among MSS solutions. Ray-tracing-based corrections are then applied to the measurements identified as LOS to reduce sound-speed-related ranging bias and construct differentiated residual characteristics. Subsequently, a robust weighting function is introduced to iteratively suppress the influence of remaining NLOS errors. Deep-sea experimental results demonstrate that within a LOS/NLOS mixed region at ranges of 19.28–20.62 km, the proposed method reduces the positioning error from the order of hundred of meters to 23.87 m, improving acoustic position calibration performance.
- 4 June 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (26)
An acoustic positioning method for underwater vehicles in deep-sea LOS/NLOS mixed regions
In deep-sea navigation and observation missions, accurate navigation of underwater vehicles relies on deep-sea long baseline (LBL) acoustic positioning systems to provide reliable position calibration under line-of-sight (LOS) conditions. However, due to complex multipath propagation and array geometry, practical deep-sea operational environments commonly exhibit mixed observation conditions where LOS and non-line-of-sight (NLOS) acoustic paths coexist. The unobservable systematic ranging bias introduced by NLOS measurements significantly degrades the positioning calibration capability of LBL systems. To address this issue, a robust acoustic positioning method for deep-sea LOS/NLOS mixed environments is proposed. The method establishes an iterative reweighted least squares framework based on minimum solvable subsets (MSS) with a two-stage processing strategy. First, NLOS measurements are structurally identified and excluded through residual consistency tests among MSS solutions. Ray-tracing-based corrections are then applied to the measurements identified as LOS to reduce sound-speed-related ranging bias and construct differentiated residual characteristics. Subsequently, a robust weighting function is introduced to iteratively suppress the influence of remaining NLOS errors. Deep-sea experimental results demonstrate that within a LOS/NLOS mixed region at ranges of 19.28–20.62 km, the proposed method reduces the positioning error from the order of hundred of meters to 23.87 m, improving acoustic position calibration performance.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-12
An Angular Misalignment Calibration Method for Underwater Platform Based on Dual Seabed Datums
The ultra-short baseline (USBL) system plays an important role in underwater vehicle positioning. The angular misalignment (AM) between the acoustic array and attitude sensor is the main source of error in the USBL system. Existing AM calibration methods are primarily designed for surface platform (SP) and rely on high-precision platform position information provided by satellite positioning devices. However, this requirement is especially strict for platforms performing covert underwater missions. To address this limitation, this paper proposes a novel AM calibration method for underwater platform (UP) based on dual seabed datums. The proposed method eliminates the need for platform position parameters by differentially positioning the dual seabed datums using the USBL system. Consequently, it can be conducted entirely underwater, ensuring the covert operation of the UP. To validate its performance, precision analysis, simulations, and field trials were conducted. The results demonstrate that the proposed method achieves calibration precision comparable to that of the existing method for SP, without relying on platform position information.
- 11 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-12
An Angular Misalignment Calibration Method for Underwater Platform Based on Dual Seabed Datums
The ultra-short baseline (USBL) system plays an important role in underwater vehicle positioning. The angular misalignment (AM) between the acoustic array and attitude sensor is the main source of error in the USBL system. Existing AM calibration methods are primarily designed for surface platform (SP) and rely on high-precision platform position information provided by satellite positioning devices. However, this requirement is especially strict for platforms performing covert underwater missions. To address this limitation, this paper proposes a novel AM calibration method for underwater platform (UP) based on dual seabed datums. The proposed method eliminates the need for platform position parameters by differentially positioning the dual seabed datums using the USBL system. Consequently, it can be conducted entirely underwater, ensuring the covert operation of the UP. To validate its performance, precision analysis, simulations, and field trials were conducted. The results demonstrate that the proposed method achieves calibration precision comparable to that of the existing method for SP, without relying on platform position information.
- Open Access
- 1 June 2025
- Published by Acoustical Society of America (ASA) in JASA Express Letters
- Vol. 5 (6)
A deep-sea direct sound ranging method based on effective sound velocity estimation for turning ray
The complexity of deep-sea acoustic ray bending is positively correlated with propagation distance, typically turning beyond 10 km. Existing ranging correction methods fail under turning conditions, limiting ranging accuracy. This letter proposes an effective sound velocity estimation method for turning ray, based on reliable acoustic path boundary to classify turning direct sound and establish a ray-tracing model for ranging correction. This method extends high-accuracy ranging from a 10 km scale to the first convergence zone. Experimental results demonstrate that the method achieves a positioning precision of 6.18 m at a horizontal distance of 34 km, validating its effectiveness.
- 1 June 2025
- Published by Acoustical Society of America (ASA) in JASA Express Letters
- Vol. 5 (6)
Open AccessA deep-sea direct sound ranging method based on effective sound velocity estimation for turning ray
The complexity of deep-sea acoustic ray bending is positively correlated with propagation distance, typically turning beyond 10 km. Existing ranging correction methods fail under turning conditions, limiting ranging accuracy. This letter proposes an effective sound velocity estimation method for turning ray, based on reliable acoustic path boundary to classify turning direct sound and establish a ray-tracing model for ranging correction. This method extends high-accuracy ranging from a 10 km scale to the first convergence zone. Experimental results demonstrate that the method achieves a positioning precision of 6.18 m at a horizontal distance of 34 km, validating its effectiveness.
- 9 May 2025
- Published by Elsevier in Applied Acoustics
- Vol. 238
A track-before-detect algorithm for underwater acoustic DSSS signal by introducing Doppler observation
- 9 May 2025
- Published by Elsevier in Applied Acoustics
- Vol. 238
A track-before-detect algorithm for underwater acoustic DSSS signal by introducing Doppler observation
- 15 February 2025
- Published by Springer Nature
- p. 1-35
High Precise Ultra-Short Baseline Acoustic Positioning System for Deep Sea
- 15 February 2025
- Published by Springer Nature
- p. 1-35
High Precise Ultra-Short Baseline Acoustic Positioning System for Deep Sea
- Open Access
- 1 February 2025
- Published by Acoustical Society of America (ASA) in JASA Express Letters
- Vol. 5 (2)
Sonar micro-Doppler effect induced by ship oscillatory motion in waves: Phenomenon, model, and experimentation
Traditional research attributes the modulated sidebands of ship radiation line-spectrum signals to reflections off rough ocean surfaces, but the Doppler effect caused by vessel motion may also contribute. This study establishes a micro-Doppler signal model based on wave-induced ship swaying, explaining that this phenomenon arises from the ship oscillatory motion in waves. The sea trial results demonstrate that the peak wave frequency, the frequency of ship micro-motions, and the micro-Doppler characteristic frequency recorded by the beacon exhibit a sudden frequency shift occurring synchronously from 0.075 to 0.115 Hz, thereby verifying the validity of the proposed model.
- 1 February 2025
- Published by Acoustical Society of America (ASA) in JASA Express Letters
- Vol. 5 (2)
Open AccessSonar micro-Doppler effect induced by ship oscillatory motion in waves: Phenomenon, model, and experimentation
Traditional research attributes the modulated sidebands of ship radiation line-spectrum signals to reflections off rough ocean surfaces, but the Doppler effect caused by vessel motion may also contribute. This study establishes a micro-Doppler signal model based on wave-induced ship swaying, explaining that this phenomenon arises from the ship oscillatory motion in waves. The sea trial results demonstrate that the peak wave frequency, the frequency of ship micro-motions, and the micro-Doppler characteristic frequency recorded by the beacon exhibit a sudden frequency shift occurring synchronously from 0.075 to 0.115 Hz, thereby verifying the validity of the proposed model.
- 31 May 2023
- Published by Elsevier in Applied Acoustics
- Vol. 210
A calibration method of high-precision transducer acoustic phase center under outfield experiments
- 31 May 2023
- Published by Elsevier in Applied Acoustics
- Vol. 210
A calibration method of high-precision transducer acoustic phase center under outfield experiments