Rie Matsumoto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Rie Matsumoto has a total of 118 co-authors. Here are the top co-authors by number of shared publications:
- Shinji Yuasa
National Institute of Advanced Industrial Science and Technology (AIST)
32 shared publications - Akio Fukushima
National Institute of Advanced Industrial Science and Technology
22 shared publications - Hiroshi Imamura
National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8568, Japan
20 shared publications - Hitoshi Kubota
Research Institute for Hybrid Functional Integration, National Institute of Advanced Industrial Science and Technology (AIST), Central 2, 1-1-1 Umezono, Tsukuba 305-8568, Ibaraki, Japan
18 shared publications - Kay Yakushiji
National Institute of Advanced Industrial Science and Technology (AIST), Research Center for Emerging Computing Technologies, Tsukuba, Ibaraki 305-8568, Japan
11 shared publications - Taro Nagahama
Division of Applied Chemistry, Faculty of Engineering, Hokkaido University, Kita 13 Nishi 8 Kita-ku, Sapporo 060-8628, Japan
9 shared publications
Latest Publications
- 1 November 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (11) , 110905
Reduction of write-error rate for a voltage-controlled magnetoresistive random access memory with nonlinear voltage-dependent magnetic anisotropy by using short-time reverse bias method
A short-time reverse bias writing method for voltage-controlled magnetoresistive random access memory (VCMRAM) is proposed. The method can reduce the write-error rate (WER) of VCMRAM showing nonlinear voltage-dependent magnetic anisotropy. The short-time reverse bias is applied just before the switching pulse. The results show that the WER can be several orders of magnitude lower than the conventional relaxing reverse bias method when the perpendicular magnetic anisotropy cannot be eliminated by applying a switching pulse.
- 1 November 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (11) , 110905
Reduction of write-error rate for a voltage-controlled magnetoresistive random access memory with nonlinear voltage-dependent magnetic anisotropy by using short-time reverse bias method
A short-time reverse bias writing method for voltage-controlled magnetoresistive random access memory (VCMRAM) is proposed. The method can reduce the write-error rate (WER) of VCMRAM showing nonlinear voltage-dependent magnetic anisotropy. The short-time reverse bias is applied just before the switching pulse. The results show that the WER can be several orders of magnitude lower than the conventional relaxing reverse bias method when the perpendicular magnetic anisotropy cannot be eliminated by applying a switching pulse.
- 13 January 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (2)
Write error reduction in magnetic tunnel junctions for voltage-controlled magnetoresistive random access memory by using exchange coupled free layer
Voltage-controlled magnetoresistive random access memory (VC-MRAM) is an emerging nonvolatile memory based on the voltage-controlled magnetic anisotropy (VCMA) effect. It has been garnering considerable attention because of its fast and low-power operation. However, two major issues must be addressed for practical applications. First, the voltage-induced switching of the free layer magnetization is sensitive to ultrashort voltage pulse duration. Second, the write error rate (WER) of the voltage-induced switching is high. To address these issues, a magnetic tunnel junction (MTJ) structure with an exchange coupled free layer, consisting of a precession layer with the VCMA effect and an anchor layer without the VCMA effect, is proposed. The anchor layer prevents the precession layer from returning to its initial direction, thereby reducing the WER without requiring the voltage pulse duration to be precisely controlled. The write operation of the proposed MTJ with an exchange coupled free layer was analyzed using the macrospin model. Using optimized MTJ parameters, a low WER of approximately 10−6 was obtained for an 80 nm MTJ without requiring the pulse duration to be precisely controlled. These results facilitate the reduction of the WER for VC-MRAM and improve its usability, thereby expanding its range of applications.
- 13 January 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (2)
Write error reduction in magnetic tunnel junctions for voltage-controlled magnetoresistive random access memory by using exchange coupled free layer
Voltage-controlled magnetoresistive random access memory (VC-MRAM) is an emerging nonvolatile memory based on the voltage-controlled magnetic anisotropy (VCMA) effect. It has been garnering considerable attention because of its fast and low-power operation. However, two major issues must be addressed for practical applications. First, the voltage-induced switching of the free layer magnetization is sensitive to ultrashort voltage pulse duration. Second, the write error rate (WER) of the voltage-induced switching is high. To address these issues, a magnetic tunnel junction (MTJ) structure with an exchange coupled free layer, consisting of a precession layer with the VCMA effect and an anchor layer without the VCMA effect, is proposed. The anchor layer prevents the precession layer from returning to its initial direction, thereby reducing the WER without requiring the voltage pulse duration to be precisely controlled. The write operation of the proposed MTJ with an exchange coupled free layer was analyzed using the macrospin model. Using optimized MTJ parameters, a low WER of approximately 10−6 was obtained for an 80 nm MTJ without requiring the pulse duration to be precisely controlled. These results facilitate the reduction of the WER for VC-MRAM and improve its usability, thereby expanding its range of applications.
- 12 July 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 22 (1) , 014032
noise of a nanopillar tunnel-magnetoresistance sensor originating from a wide distribution of bath correlation timesThe tunnel magnetoresistance (TMR) sensor is a highly sensitive magnetic field sensor that is expected to be applied in various fields, such as magnetic recording, industrial sensing, and biomedical sensing. To improve the detection capability of TMR sensors in the low-frequency regime, it is necessary to suppress the noise. We theoretically study the noise of a tiny TMR sensor using the macrospin model. Starting from the generalized Langevin equation, the noise power spectrum and the Hooge parameter are derived. The calculated Hooge parameter of a tiny TMR sensor is much smaller than that of a conventional TMR sensor with large junction area. The results provide a new perspective on magnetic noise and will be useful for improving TMR sensors.- 12 July 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 22 (1) , 014032
noise of a nanopillar tunnel-magnetoresistance sensor originating from a wide distribution of bath correlation timesThe tunnel magnetoresistance (TMR) sensor is a highly sensitive magnetic field sensor that is expected to be applied in various fields, such as magnetic recording, industrial sensing, and biomedical sensing. To improve the detection capability of TMR sensors in the low-frequency regime, it is necessary to suppress the noise. We theoretically study the noise of a tiny TMR sensor using the macrospin model. Starting from the generalized Langevin equation, the noise power spectrum and the Hooge parameter are derived. The calculated Hooge parameter of a tiny TMR sensor is much smaller than that of a conventional TMR sensor with large junction area. The results provide a new perspective on magnetic noise and will be useful for improving TMR sensors.- Open Access
Substantial reduction of write-error rate for voltage-controlled magnetoresistive random access memory by in-plane demagnetizing field and voltage-induced negative out-of-plane anisotropy field
Voltage-controlled magnetoresistive random access memory (VC-MRAM) based on voltage-induced dynamic switching in magnetic tunnel junctions (MTJs) is a promising ultimate non-volatile memory with ultralow power consumption. However, the dynamic switching in a conventional MTJ is accompanied by a relatively high write error rate (WER), hindering the reliable operation of VC-MRAM. Here, we propose a reliable writing scheme using the in-plane demagnetizing field (IDF) and voltage-induced negative out-of-plane anisotropy field (NOAF). Numerical simulations based on macrospin model demonstrate that the voltage-induced NOAF modifies the switching dynamics and increases the torque due to the IDF, thereby reducing the switching time. The IDF and voltage-induced NOAF also reduce the mean energy difference between the magnetization direction at the end of the pulse and the equilibrium direction. As a result, an appropriate combination of the IDF and voltage-induced NOAF reduces the WER by one order of magnitude compared with that of the dynamic switching in a conventional MTJ.
Open AccessSubstantial reduction of write-error rate for voltage-controlled magnetoresistive random access memory by in-plane demagnetizing field and voltage-induced negative out-of-plane anisotropy field
Voltage-controlled magnetoresistive random access memory (VC-MRAM) based on voltage-induced dynamic switching in magnetic tunnel junctions (MTJs) is a promising ultimate non-volatile memory with ultralow power consumption. However, the dynamic switching in a conventional MTJ is accompanied by a relatively high write error rate (WER), hindering the reliable operation of VC-MRAM. Here, we propose a reliable writing scheme using the in-plane demagnetizing field (IDF) and voltage-induced negative out-of-plane anisotropy field (NOAF). Numerical simulations based on macrospin model demonstrate that the voltage-induced NOAF modifies the switching dynamics and increases the torque due to the IDF, thereby reducing the switching time. The IDF and voltage-induced NOAF also reduce the mean energy difference between the magnetization direction at the end of the pulse and the equilibrium direction. As a result, an appropriate combination of the IDF and voltage-induced NOAF reduces the WER by one order of magnitude compared with that of the dynamic switching in a conventional MTJ.
- 22 November 2022
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 18 (5) , 054069
Heavily Damped Precessional Switching with Very Low Write-Error Rate in Elliptical-Cylinder Magnetic Tunnel Junctions
Voltage-induced dynamic switching in magnetic tunnel junctions (MTJs) is a writing technique for voltage-controlled magnetoresistive random access memory (VCMRAM), which is expected to be an ultimate nonvolatile memory with ultralow power consumption. In conventional dynamic switching, the width of subnanosecond write voltage pulses must be precisely controlled to achieve a sufficiently low write-error rate (WER). This very narrow tolerance of pulse width is the biggest technical difficulty in developing VCMRAM. Heavily damped precessional switching is a writing scheme for VCMRAM with a substantially high tolerance of pulse width, although the minimum WER has been much higher than that of conventional dynamic switching with an optimum pulse width. In this study, we theoretically investigate the effect of MTJ shape and the direction of the applied magnetic field on the WER of heavily damped precessional switching. The results show that the WER in elliptical-cylinder MTJs can be several orders of magnitude smaller than that in usual circular-cylinder MTJs when the external magnetic field is applied parallel to the minor axis of the ellipse. The reduction in the WER is due to the fact that the demagnetization field narrows the component of the magnetization distribution perpendicular to the plane direction immediately before the voltage is applied.
- 22 November 2022
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 18 (5) , 054069
Heavily Damped Precessional Switching with Very Low Write-Error Rate in Elliptical-Cylinder Magnetic Tunnel Junctions
Voltage-induced dynamic switching in magnetic tunnel junctions (MTJs) is a writing technique for voltage-controlled magnetoresistive random access memory (VCMRAM), which is expected to be an ultimate nonvolatile memory with ultralow power consumption. In conventional dynamic switching, the width of subnanosecond write voltage pulses must be precisely controlled to achieve a sufficiently low write-error rate (WER). This very narrow tolerance of pulse width is the biggest technical difficulty in developing VCMRAM. Heavily damped precessional switching is a writing scheme for VCMRAM with a substantially high tolerance of pulse width, although the minimum WER has been much higher than that of conventional dynamic switching with an optimum pulse width. In this study, we theoretically investigate the effect of MTJ shape and the direction of the applied magnetic field on the WER of heavily damped precessional switching. The results show that the WER in elliptical-cylinder MTJs can be several orders of magnitude smaller than that in usual circular-cylinder MTJs when the external magnetic field is applied parallel to the minor axis of the ellipse. The reduction in the WER is due to the fact that the demagnetization field narrows the component of the magnetization distribution perpendicular to the plane direction immediately before the voltage is applied.
- Open Access
Heavily Damped Precessional Switching with Very Low Write-error Rate in Elliptical-cylinder Magnetic Tunnel Junction
Voltage-induced dynamic switching in magnetic tunnel junctions (MTJs) is a writing technique for voltage-controlled magnetoresistive random access memory (VCMRAM), which is expected to be an ultimate non-volatile memory with ultra-low power consumption. In conventional dynamic switching, the width of sub-nanosecond write voltage pulses must be precisely controlled to achieve a sufficiently low write-error rate (WER). This very narrow tolerance of pulse width is the biggest technical difficulty in developing VCMRAM. Heavily damped precessional switching is a writing scheme for VCMRAM with a substantially high tolerance of pulse width although the minimum WER has been much higher than that of conventional dynamic switching with an optimum pulse width. In this study, we theoretically investigate the effect of MTJ shape and the direction of the applied magnetic field on the WER of heavily damped precessional switching. The results show that the WER in elliptical-cylinder MTJ can be several orders of magnitude smaller than that in usual circular-cylinder MTJ when the external magnetic field is applied parallel to the minor axis of the ellipse. The reduction in WER is due to the fact that the demagnetization field narrows the component of the magnetization distribution perpendicular to the plane direction immediately before the voltage is applied.
Open AccessHeavily Damped Precessional Switching with Very Low Write-error Rate in Elliptical-cylinder Magnetic Tunnel Junction
Voltage-induced dynamic switching in magnetic tunnel junctions (MTJs) is a writing technique for voltage-controlled magnetoresistive random access memory (VCMRAM), which is expected to be an ultimate non-volatile memory with ultra-low power consumption. In conventional dynamic switching, the width of sub-nanosecond write voltage pulses must be precisely controlled to achieve a sufficiently low write-error rate (WER). This very narrow tolerance of pulse width is the biggest technical difficulty in developing VCMRAM. Heavily damped precessional switching is a writing scheme for VCMRAM with a substantially high tolerance of pulse width although the minimum WER has been much higher than that of conventional dynamic switching with an optimum pulse width. In this study, we theoretically investigate the effect of MTJ shape and the direction of the applied magnetic field on the WER of heavily damped precessional switching. The results show that the WER in elliptical-cylinder MTJ can be several orders of magnitude smaller than that in usual circular-cylinder MTJ when the external magnetic field is applied parallel to the minor axis of the ellipse. The reduction in WER is due to the fact that the demagnetization field narrows the component of the magnetization distribution perpendicular to the plane direction immediately before the voltage is applied.
- 25 March 2022
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 17 (3) , 034063
Write Error Rate in Bias-Magnetic-Field-Free Voltage-Induced Switching in a Conically Magnetized Free Layer
Write error rate (WER) in voltage-induced magnetization switching of a conically magnetized free layer with an elliptic cylinder shape is numerically calculated on the basis of the macrospin model. Simulations using the Langevin equation show that a WER lower than the order of , which enables practical WER with a single error-correction process, is theoretically feasible at zero-bias magnetic field and room temperature. We also show that WER at a given thermal stability factor and the volume of the free layer can be reduced by adopting the free layer with the larger in-plane shape anisotropy field and a moderate cone angle at zero-bias voltage.- 25 March 2022
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 17 (3) , 034063
Write Error Rate in Bias-Magnetic-Field-Free Voltage-Induced Switching in a Conically Magnetized Free Layer
Write error rate (WER) in voltage-induced magnetization switching of a conically magnetized free layer with an elliptic cylinder shape is numerically calculated on the basis of the macrospin model. Simulations using the Langevin equation show that a WER lower than the order of , which enables practical WER with a single error-correction process, is theoretically feasible at zero-bias magnetic field and room temperature. We also show that WER at a given thermal stability factor and the volume of the free layer can be reduced by adopting the free layer with the larger in-plane shape anisotropy field and a moderate cone angle at zero-bias voltage.- 22 December 2020
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 14 (6) , 064062
Large-Angle Precession of Magnetization Maintained by a Microwave Voltage
Effects of a microwave voltage on magnetization precession are analyzed based on a macrospin model. The microwave voltage induces the oscillating anisotropy field through the voltage-controlled magnetic anisotropy (VCMA) effect, and then stimulates the magnetization. The large-angle precession is maintained if the magnetization synchronizes with the microwave voltage. The effective equations of motion of the magnetization with an oscillating anisotropy field are derived, and the mechanism of the synchronization is clarified by analyzing the derived equations of motion. The conditions of the angular frequency detuning and the amplitude of the oscillating anisotropy field for synchronization are obtained. The results are useful for development of VCMA-based energy-efficient spintronic devices using magnetization precession such as a VCMA-based magnetoresistive random-access memory and a nanoscale microwave magnetic field generator.
- 22 December 2020
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 14 (6) , 064062
Large-Angle Precession of Magnetization Maintained by a Microwave Voltage
Effects of a microwave voltage on magnetization precession are analyzed based on a macrospin model. The microwave voltage induces the oscillating anisotropy field through the voltage-controlled magnetic anisotropy (VCMA) effect, and then stimulates the magnetization. The large-angle precession is maintained if the magnetization synchronizes with the microwave voltage. The effective equations of motion of the magnetization with an oscillating anisotropy field are derived, and the mechanism of the synchronization is clarified by analyzing the derived equations of motion. The conditions of the angular frequency detuning and the amplitude of the oscillating anisotropy field for synchronization are obtained. The results are useful for development of VCMA-based energy-efficient spintronic devices using magnetization precession such as a VCMA-based magnetoresistive random-access memory and a nanoscale microwave magnetic field generator.