HZHonggang Zhao

Honggang Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Honggang Zhao has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Rapid prediction of acoustic target strength of underwater cylindrical shells using deep neural networks

    by Zihao Liu, Honggang Zhao, Wenzheng Zhang, Yao Sun, Dianlong Yu

    To reduce the computational cost of evaluating the acoustic target strength of large-scale underwater stiffened cylindrical shells, a rapid prediction method based on a deep neural network(DNN) is proposed. First, a two-dimensional axisymmetric finite element method(FEM) is established to calculate the acoustic target strength of underwater stiffened cylindrical shells and generate high-fidelity training samples. Then, a DNN is developed to learn the nonlinear mapping between structural parameters and acoustic target strength. The DNN results are in good agreement with those obtained by the two-dimensional axisymmetric FEM, demonstrating the effectiveness of the proposed DNN method. In addition, the computational time for target strength evaluation is reduced by more than two orders. The effects of structural parameters on the acoustic target strength of the cylindrical shell are also analyzed. The proposed approach provides an efficient tool for the rapid prediction of acoustic target strength of large-scale underwater cylindrical shells and shows promising engineering applications.

  • Open Access

    A novel aperiodic metastructure for enhancing energy absorption

    by Wenzheng Zhang, Honggang Zhao, Yao Sun, Zihao Liu, Jianfei Yin, Jihong Wen

    The aperiodic einstein structure exhibits excellent performance in stress dispersion, damage tolerance and deformation adaptability. However, its plateau stress and energy absorption of partially oriented cell walls need further improvement. This work proposes a novel einstein-hexagonal honeycomb (EHH) metastructure that combines the regularity of periodic structures with the topological characteristics of einstein structures. The finite element (FE) method is used to analyze energy absorption and the accuracy of the FE models is validated. The compressive strength and energy absorption are 136.35% and 58.52% higher than those of the einstein structure under equal mass, respectively. This remarkable performance enhancement stems from its synergistic mechanism, which enables the EHH metastructure to exhibit a novel quasi-X deformation mode while retaining the localized deformation diversity of the einstein substructure. To further analyze the influence of synergistic effects on energy absorption, two configurations of EHH dominated by the honeycomb (EHH-H) and the einstein (EHH-E) are constructed. Parametric analysis reveals that the EHH metastructure achieves better energy absorption when the einstein substructure is slightly thicker than the hexagonal honeycomb. The proposed strategy for enhancing energy absorption of aperiodic structures through synergistic mechanisms offers an effective method for designing high-performance protective structures.

  • Open Access

    Mechanism and Optimization of Acoustic Absorption of an Underwater Lattice-Reinforced Meta-Absorber

    by Zhenkai Yin, Honggang Zhao, Wenzheng Zhang, Yao Sun, Zihao Liu, Jingfan Yang, Jihong Wen

    Conventional rubber-based absorbers containing cavities exhibit a decline in acoustic absorption as hydrostatic pressure rises. To improve sound absorption performance under hydrostatic pressure, a lattice-reinforced meta-absorber (LRMA) is proposed in this paper. The rubber layer is embedded with periodic cavities and aluminum pipes as a lattice reinforcement structure. The energy dissipation density, displacement field, and surface acoustic impedance are employed to reveal the sound absorption mechanism of the LRMA. Then, the collaborative design of material and structure for the LRMA is optimized using a differential evolution algorithm. Finally, the experiment verifies that the average sound absorption coefficient is above 0.9 in the frequency range of 500–5000 Hz under hydrostatic pressure of 1 MPa, 2 MPa, and 3 MPa. The results show that the face sheet and the lattice reinforcement structure have good hydrostatic pressure resistance.


  • Tunable energy absorption of pyramid-stacked negative stiffness metastructure

    by Wenzheng Zhang, Honggang Zhao, Qiduo Jin, Yao Sun, Zhenkai Yin, Qian Cheng, Xuguang Chen


  • Open Access

    Topology optimization of chiral metamaterials with application to underwater sound insulation

    by Chao Wang, Honggang Zhao, Yang Wang, Jie Zhong, Dianlong Yu, Jihong Wen

    Chiral metamaterials have been proven to possess many appealing mechanical phenomena, such as negative Poisson’s ratio, high-impact resistance, and energy absorption. This work extends the applications of chiral metamaterials to underwater sound insulation. Various chiral metamaterials with low acoustic impedance and proper stiffness are inversely designed using the topology optimization scheme. Low acoustic impedance enables the metamaterials to have a high and broadband sound transmission loss (STL), while proper stiffness guarantees its robust acoustic performance under a hydrostatic pressure. As proof-of-concept demonstrations, two specimens are fabricated and tested in a water-filled impedance tube. Experimental results show that, on average, over 95% incident sound energy can be isolated by the specimens in a broad frequency range from 1 kHz to 5 kHz, while the sound insulation performance keeps stable under a certain hydrostatic pressure. This work may provide new insights for chiral metamaterials into the underwater applications with sound insulation.


  • Open Access

    A review of hydroacoustic absorbing materials under hydrostatic pressure

    by Yejin Wei, Honggang Zhao, Yang Wang, Jie Zhong, Yao Sun, Zhoufu Zheng, Haibin Yang, Jihong Wen

    With the rapid technological advancements, sonar technology has made remarkable progress in recent years. This advancement not only facilitates the advancement of sonar technology, but also imposes stricter requirements on the stealth performance of underwater equipment, such as submarines. Consequently, hydroacoustic absorbing materials (HAMs) have emerged as indispensable tools for achieving acoustic stealth in such equipment. Extensive research has been conducted on HAMs in recent years. However, due to the faster propagation speed and longer wavelength of underwater sound waves compared to airborne sound, effective sound absorption becomes increasingly challenging. Additionally, considering the higher density of water, sound absorbing materials must be able to withstand high-level pressure, particularly in deep-water environments. These factors pose significant challenges in designing efficient HAMs. Previous studies have demonstrated that hydrostatic pressure has a significant impact on the acoustic properties of HAMs. Under hydrostatic pressure, the matrix parameters of HAMs undergo changes, and the internal acoustic structure is squeezed and deformed. This specifically leads to reduced sound absorption in low frequencies. Currently, the design of low-frequency and wideband HAMs under high hydrostatic pressure remains a challenging task in this field. Therefore, further investigation is needed to analyze and optimize sound absorption. This review provides an extensive overview of the current research status on analysis methods for acoustic absorption in HAMs under hydrostatic pressure. The focus is primarily on theoretical and experimental analysis methods. Additionally, this review summarizes the sound absorption mechanisms of HAMs and examines how hydrostatic pressure impacts these mechanisms. Specifically, under hydrostatic pressure, the damping dissipation effects caused by internal friction and relaxation processes within the matrix material of HAMs are diminished. Furthermore, compression deformation weakens resonance effects in acoustic structures, such as cavities or local resonances, ultimately leading to a decrease in the sound absorption performance of HAMs. This review further summarizes the design considerations for existing HAMs. Regarding the matrix material, enhanced pressure resistance and sound absorption performance can be achieved through a combination of diverse materials and specialized structures. In terms of acoustic structure, superior pressure resistance and sound absorption capabilities can be achieved by incorporating reinforced structures that exhibit increased resistance to hydrostatic pressure or by employing innovative metamaterial designs. Finally, the review presents a forward-looking perspective on the research trends in HAMs under hydrostatic pressure. Currently, a significant challenge remains in balancing hydrostatic pressure resistance and low-frequency broadband sound absorption. There is a pressing need for more meticulous designs of acoustic models suitable for high-pressure conditions exceeding 4.5 MPa. These unresolved questions represent crucial areas for future investigations. It is anticipated that this review will provide novel insights into the design of materials with sound absorption capabilities under hydrostatic pressure, paving the way for future advancements in this field.


  • Acoustically soft and mechanically robust hierarchical metamaterials in water

    by Yang Wang, Honggang Zhao, Haibin Yang, Hongjia Zhang, Tao Li, Chao Wang, Jiawei Liu, Jie Zhong, Dianlong Yu, Jihong Wen

    Isolating noise in water relies on materials with low acoustic impedance. However, reducing the existing materials’ acoustic impedance severely compromises their stiffness and strength, resulting in a long-standing challenge of sound isolation in deep-sea environments with high ambient pressure. To overcome the mutual exclusion of low acoustic impedance and high mechanical properties, we propose a design principle including two steps that regulate the lattice orientation and incorporate a hierarchical morphology in an anisotropic metamaterial. Regulating the lattice orientation leads to low effective acoustic impedance while counterintuitively improving the initial stiffness. By learning from nature, incorporating a hierarchical morphology enables the metamaterial with an unprecedented decoupling characteristic that the mechanical strength can be enhanced independently from the acoustic impedance. A hierarchical metamaterial is constructed as a proof-of-concept demonstration and displays high sound transmission loss over 16 dB in a low and broad frequency range from 400 to 1200 Hz. Of note, the hierarchical metamaterial could maintain stable acoustic performance even under a high ambient pressure of 2 MPa. This work not only opens an alternative avenue for realizing sound isolation in deep-sea environments but also offers a design principle for metamaterials combining antagonistic functional properties.


  • Open Access

    Low-frequency waterborne sound insulation by an acoustic metascreen with a metal chiral structure

    by Chao Wang, Honggang Zhao, Yang Wang, Jie Zhong, Haibin Yang, Dianlong Yu, Jihong Wen

    Low sound speed or low-density materials can be used as soft acoustic boundaries in water, potentially as low-frequency underwater sound insulation. This study uses a chiral structure to construct an acoustic metascreen with deep subwavelength thickness. The results show that the transmission coefficient of the metascreen decreases noticeably in the low-frequency range when adjusting the chiral structure. The displacement pattern and the effective acoustic impedance are used to investigate the sound insulation mechanism. Low sound speed and effective acoustic impedance are found in the anisotropic chiral structure, and an extensive range of quasi-longitudinal wave phase velocities from 116.70 m/s to 3935.48 m/s can be obtained by adjusting the structural parameters without changing the filling rate. Finally, the effect of the oblique incidence angle on the sound insulation of the metascreen is investigated.


  • Homogenization of an acoustic coating with a steel backing subject to an obliquely incident sound

    by Jiawei Liu, Haibin Yang, Honggang Zhao, Yang Wang, Dianlong Yu, Jihong Wen

    An effective homogenization model for the acoustic coating of underwater structures is important for reducing the complexity of acoustic scattering computation, which arises from the huge difference in scale between the integral structure and the inhomogeneous microstructure of the coating. The main difficulty of this homogenization arises from the oblique-incidence effect of external sound waves and the interface effect between the coating and backing. In this work, a hybrid method, combining the Bloch wave analysis and retrieval technique, is proposed to characterize the acoustic behavior of the voided coating backed with a steel plate under the action of external sound waves with an arbitrary incident angle. The effectiveness of this method is validated by numerical simulations and comparison with the Bloch wave method and the traditional retrieval method. The influence of the shear-wave effect under obliquely incident sound waves and the coupling effect between the coating and the backing on the homogenization model is investigated in detail, providing a comprehensive understanding of the effective acoustic behavior of the coating.


  • Inverse design of structured materials for broadband sound absorption

    by Yang Wang, Honggang Zhao, Haibin Yang, Jie Zhong, Dianlong Yu, Jihong Wen

    This paper discusses the design of structured materials for broadband waterborne sound absorption. The structured materials are composed of a rubber matrix embedded periodically with cavities. To find the optimal distribution of cavities, an inverse design method based on topology optimization is proposed. Structured materials with novel hybrid cavities are thus designed. Efficient absorption over a wide frequency range between 600 Hz and 8000 Hz is achieved. The underlying mechanism behind the broadband absorption performance is revealed. Both the bending motion of the structured material and the translational motion of its steel backing affect the absorption in the low-frequency regime. Coherent coupling of local resonant modes together with the multiple scattering effects among cavities contribute to sound absorption in the mid-to-high frequency range. Moreover, a comparison with a conventionally structured material demonstrates the advantages of our design. Finally, an inverse design process with a different rubber matrix is performed. The results show that these cavities still exhibit similar topological features when the shear wave velocity of the rubber matrix is varied.