Hongli Liu

Hongli Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hongli Liu has a total of 82 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Realizing Molecular Excited-State Regulation through Donor Molecular Engineering: The Intrinsic Relationship between TADF and HLCT Mechanisms

    by Chuanxin Liao, Jiaxu Bai, Bo Chen, Hongqiang Guo, Xianggao Li, Shirong Wang, Hongli Liu

    For developing high-performance pure organic light-emitting diode (OLED) emitters, thermally activated delayed fluorescence (TADF) and hybrid local and charge-transfer (HLCT) mechanisms are two pivotal strategies by harvesting triplet excitons via reverse intersystem crossing. The intrinsic relationship between the two in molecular design is revealed in this study: the switching between TADF and HLCT mechanisms can be achieved by adjusting the strength of the donor groups. In this work, five D-π-A-π-D type blue and green OLED emitters with acridine/phenoxazine/phenothiazine groups as donors were designed and synthesized. Compared to reported HLCT molecules adopting carbazole/diphenylamine groups as donors, the excited states of the molecules in this work were successfully regulated to TADF. The solution-processed blue/green OLED device based on FIP-DPAC/FIP-PXZ achieved the maximum external quantum efficiency (EQEmax) of 10.01%/17.45%. A strategy for regulating HLCT and TADF mechanisms of OLED emitters through donor molecular engineering was elucidated in this study.

  • Thermally Induced Self‐Assembly of Toroidal Conjugated Small Molecules Enabling High‐Performance Deep Blue Quantum Dot Light‐Emitting Diodes

    by Yaxin Li, Yuhong Wang, Shirong Wang, Wenkai Guan, Xianlong Wang, Yanliu Zhu, Zhanpeng Qin, Xianggao Li, Hongli Liu

    The inferior performance of deep blue quantum dot light‐emitting diodes (QLEDs) compared with red and green counterparts is hindering the commercialization of full‐color QLED display, since their hole mobility of organic hole transport layer (HTL) is lower than the electron mobility of ZnMgO. Although commonly used p‑type small molecules with ordered packing can enhance hole mobility, strong intermolecular interaction causes HTL inhomogeneity and excimer formation. To address this issue, this study designs and synthesizes three propeller‐like molecules, HPB‐6tBu, HPB‐2Cz, and HPB‐6Cz, whose molecular structure suppresses face‐to‐face stacking while allowing for intramolecular toroidal delocalization. Among them, HPB‐6Cz bears superior hole mobility, benefiting from its thermally induced self‐assembly, which simultaneously achieves homogeneous HTL morphology and ordered molecular packing. The intermolecular π–π interaction among HOMO‐located carbazole groups results in a 6.03‐fold enhancement in the hole mobility of HPB‐6Cz upon self‐assembly. Doping HPB‐6Cz into PVK permits ordered packing of PVK and the hole mobility of doped HTL is boosted from 2.21 × 10 −5 to 1.55 × 10 −3 cm 2 V −1 s −1 . Resulting QLED (CIE y = 0.036) based on ZnCdS/ZnS QDs achieves an external quantum efficiency (EQE) of 23.24%, which is the state‐of‐the‐art EQE reported to date. Its operational half‐lifetime also extends from 4321 to 17795 h at 100 cd m −2 .

  • Thermally Induced Self‐Assembly of Toroidal Conjugated Small Molecules Enabling High‐Performance Deep Blue Quantum Dot Light‐Emitting Diodes

    by Yaxin Li, Yuhong Wang, Shirong Wang, Wenkai Guan, Xianlong Wang, Yanliu Zhu, Zhanpeng Qin, Xianggao Li, Hongli Liu

    The inferior performance of deep blue quantum dot light‐emitting diodes (QLEDs) compared with red and green counterparts is hindering the commercialization of full‐color QLED display, since their hole mobility of organic hole transport layer (HTL) is lower than the electron mobility of ZnMgO. Although commonly used p‑type small molecules with ordered packing can enhance hole mobility, strong intermolecular interaction causes HTL inhomogeneity and excimer formation. To address this issue, this study designs and synthesizes three propeller‐like molecules, HPB‐6tBu, HPB‐2Cz, and HPB‐6Cz, whose molecular structure suppresses face‐to‐face stacking while allowing for intramolecular toroidal delocalization. Among them, HPB‐6Cz bears superior hole mobility, benefiting from its thermally induced self‐assembly, which simultaneously achieves homogeneous HTL morphology and ordered molecular packing. The intermolecular π–π interaction among HOMO‐located carbazole groups results in a 6.03‐fold enhancement in the hole mobility of HPB‐6Cz upon self‐assembly. Doping HPB‐6Cz into PVK permits ordered packing of PVK and the hole mobility of doped HTL is boosted from 2.21 × 10 −5 to 1.55 × 10 −3 cm 2 V −1 s −1 . Resulting QLED (CIE y = 0.036) based on ZnCdS/ZnS QDs achieves an external quantum efficiency (EQE) of 23.24%, which is the state‐of‐the‐art EQE reported to date. Its operational half‐lifetime also extends from 4321 to 17795 h at 100 cd m −2 .

  • Novel cross-linkable blue light emitting material and its high stability OLEDs by solution process

    by Qiming Li, Jiaxu Bai, Yinzhao Zhen, Wenkai Guan, Tianhao Wang, Hongli Liu, Shirong Wang, Xianggao Li

  • Heterocyclic aromatic amine-modified hole transport layer enables energy level regulation for enhanced performance of deep blue QLEDs

    by Yiheng Huang, Zhanpeng Qin, Tianhao Wang, Xianggao Li, Shirong Wang, Hongli Liu

    Quantum dots (QDs) exhibit great promise for next-generation displays, yet deep blue quantum dots light-emitting diodes [deep blue QLEDs, CIE (International Commission on illumination) y < 0.06] lag behind red and green counterparts due to energy level mismatches and imbalanced carrier mobility. In this work, 2-aminopyridine was employed at the interface between the hole transport layer and the emitting layer to construct stepwise energy level regulation. The mechanism was elucidated through density functional theory calculations, photophysical characterization, and surface morphology analysis. The modifier deepens the HOMO level of the hole transport layer from −5.75 to −5.97 eV and increases hole mobility from 4.08 × 10−7 to 1.56 × 10−6 cm2 V−1 s−1. The device based on the modified hole transport layer achieved a record external quantum efficiency of 23.16% in deep blue QLED (CIE y = 0.027). Interface modification demonstrates an effective approach to high-efficiency deep blue QLEDs and supports the commercialization of QLEDs.

  • Synergistic Interfacial Engineering With Self‐Assembled Molecules in PEDOT:PSS Composites for High‐Performance Deep‐Blue QLEDs

    by Yixuan Li, Zhanpeng Qin, Xianlong Wang, Tianhao Wang, Yaxin Li, Yanliu Zhu, Dewang Li, Shirong Wang, Hongli Liu

    Insufficient hole injection remains a critical bottleneck hindering the commercialization of blue quantum dot light‐emitting diodes (QLEDs), making the optimization of hole transport behavior highly significant. Herein, (2‐(9 H ‐carbazol‐9‐yl)ethyl)phosphonic acid (2PACz) is incorporated into poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) to construct a composite hole injection layer (HIL). Within this composite layer, a portion of 2PACz anchors onto the ITO surface, while a portion engages in π – π interactions with hole transport layer (HTL) poly(9‐vinylcarbazole), giving rise to a synergistic dual‐interface modification effect that substantially enhances interfacial hole injection and transport. The overall hole mobility of the HIL/HTL stack increases markedly from 2.15 × 10 −7 to 7.84 × 10 −6 cm 2 V −1 s −1 . Meanwhile, the introduction of 2PACz raises the electrical conductivity of the HIL from 2.51 × 10 −4 to 5.35 × 10 −4 mS cm −1 and deepens its HOMO level from −5.15 to −5.48 eV, thereby further facilitating hole injection into the HTL. Consequently, deep‐blue QLEDs employing this composite HIL achieve a remarkable maximum luminance of 11,185.50 cd m −2 , a high external quantum efficiency of 22.61% with a CIE y coordinate of 0.0305, and an extended lifetime of 793.19 h ( T 50 @100 cd m −2 ), representing a significant improvement in optoelectronic performance.

  • Nonconjugative Planarization through sp 3 -Carbon Bridging: A Geometry-Guided Design Principle for High Mobility Triphenylamine-Based Semiconductors

    by Tianhao Wang, Shirong Wang, Xianggao Li, Hongli Liu

    Triphenylamine derivatives are essential hole-transport materials, yet their propeller-shaped conformation hinders efficient molecular packing and charge transport. Molecular planarization offers a solution, but conventional ring fusion concurrently alters the π-electronic structure. In this work, a nonconjugative planarization strategy is introduced through the design of sp3-carbon-bridged triphenylamine derivatives NX (x denotes the number of sp3-carbon bridges), effectively decoupling the planarization effect from π-conjugation. The results show that fully planar N3 has an ∼50% reduction in hole reorganization energy (λh), a sharper and higher most probable value (m) in its electronic transfer integral (Vh) distribution, and optimized transport pathways. These improvements collectively lead to a 3–4-fold increase in hole mobility (μh). Our work clarifies how planarization synergistically suppresses molecular vibrations, enhances electronic coupling, and improves packing to boost transport, providing a geometry-guided design principle for high-performance organic semiconductors.

  • Reverse Micelle Templated Construction of Strongly Confined Ultra‐Small Perovskite Quantum Dots with Exceptionally Narrow Blue Emission

    by Yanliu Zhu, Zhanpeng Qin, Shirong Wang, Xianggao Li, Hongli Liu

    Strongly confined quantum dots (QDs) have the advantages of a narrow full width at half maximum (FWHM) and rapid radiative recombination, making them promising candidates for realizing high‐end display devices with exceptional color purity. However, the synthesis of stable and ultra‐small perovskite QDs (UsPQDs) with a uniform size remains a critical challenge because of the difficulty of controlling picosecond ionic metathesis reactions. In this study, a novel reverse micelle soft‐template strategy is demonstrated for achieving the precise nanoconfinement of CsPbBr 3 UsPQDs, yielding ultra‐small monodisperse particles with an average diameter of 2 nm. The obtained CsPbBr 3 UsPQDs exhibited deep‐blue emission at 443 nm and a narrow FWHM of less than 10 nm, accompanied by a near‐unity photoluminescence quantum yield. The scalability and universality of this reverse micelle soft‐template methodology are demonstrated, realizing the controllable synthesis of MAPbBr 3 and FAPbBr 3 UsPQDs with narrow blue emissions. A liquid‐state light‐emitting diode fabricated using the UsPQDs exhibited deep blue emission (CIE: 0.157, 0.018). A patterned dot‐matrix display of 50‐µm pixels fabricated via aerosol jet printing and photolithography demonstrated the viability of achieving wide‐gamut augmented reality/virtual reality microdisplays.

  • Suppression of Excimer Formation via Conjugation‐Driven Interactions in Crosslinked Hole Transport Layer for Efficient Blue Quantum Dot Light‐Emitting Diodes

    by Zhanpeng Qin, Shirong Wang, Yanliu Zhu, Tianhao Wang, Xianggao Li, Hongli Liu

    Blue quantum dot light‐emitting diodes (QLEDs), underperforming relative to red and green counterparts, shoulder the critical responsibility for full‐color displays. Crosslinked 9,9′‐([1,1′‐biphenyl]‐4,4′‐diyl)bis(3‐ethenyl‐9H‐carbazole) (CBP‐V), owning a deep HOMO level (∼−5.9 eV), is a promising hole transport layer (HTL) candidate for blue QLEDs. However, π–π interactions and molecular rotatability in CBP‐V promote parallel stacking and electron cloud overlap. This gives rise to excimer formation, which exacerbates the energy‐level disorder in crosslinked CBP‐V and thus degrades its hole mobility. Herein, 2,6‐bis(3‐(9H‐carbazol‐9‐yl)phenyl)pyridine (26DCzPPy) and 4,4′,4″‐tris(carbazol‐9‐yl)‐triphenylamine (TCTA), featuring analogous phenylcarbazole structural fragments, are incorporated into CBP‐V to suppress excimer formation via a conjugate‐interaction‐driven strategy. The asymmetric configuration of 26DCzPPy and the branched architecture of TCTA enable modulation of molecular stacking behavior and suppress parallel stacking of CBP‐V during the crosslinking process. This realizes spatial segregation of CBP‐V and thus eliminates the prerequisite for excimer formation. Resultantly, suppression of excimer allows HTL to achieve a tenfold enhancement of hole mobility from 5.37 × 10 −4 to 5.97 × 10 −3  cm 2 ·V −1 ·s −1 . Target QLEDs gain prominent enhancements in external quantum efficiencies for deep‐blue emission (456 nm) from 11.48% to 22.92% and pure‐blue emission (470 nm) from 13.39% to 24.12%, with maximum brightness values of 29735 and 91268 cd m −2 .

  • Suppression of Excimer Formation via Conjugation‐Driven Interactions in Crosslinked Hole Transport Layer for Efficient Blue Quantum Dot Light‐Emitting Diodes

    by Zhanpeng Qin, Shirong Wang, Yanliu Zhu, Tianhao Wang, Xianggao Li, Hongli Liu

    Blue quantum dot light‐emitting diodes (QLEDs), underperforming relative to red and green counterparts, shoulder the critical responsibility for full‐color displays. Crosslinked 9,9′‐([1,1′‐biphenyl]‐4,4′‐diyl)bis(3‐ethenyl‐9H‐carbazole) (CBP‐V), owning a deep HOMO level (∼−5.9 eV), is a promising hole transport layer (HTL) candidate for blue QLEDs. However, π–π interactions and molecular rotatability in CBP‐V promote parallel stacking and electron cloud overlap. This gives rise to excimer formation, which exacerbates the energy‐level disorder in crosslinked CBP‐V and thus degrades its hole mobility. Herein, 2,6‐bis(3‐(9H‐carbazol‐9‐yl)phenyl)pyridine (26DCzPPy) and 4,4′,4″‐tris(carbazol‐9‐yl)‐triphenylamine (TCTA), featuring analogous phenylcarbazole structural fragments, are incorporated into CBP‐V to suppress excimer formation via a conjugate‐interaction‐driven strategy. The asymmetric configuration of 26DCzPPy and the branched architecture of TCTA enable modulation of molecular stacking behavior and suppress parallel stacking of CBP‐V during the crosslinking process. This realizes spatial segregation of CBP‐V and thus eliminates the prerequisite for excimer formation. Resultantly, suppression of excimer allows HTL to achieve a tenfold enhancement of hole mobility from 5.37 × 10 −4 to 5.97 × 10 −3  cm 2 ·V −1 ·s −1 . Target QLEDs gain prominent enhancements in external quantum efficiencies for deep‐blue emission (456 nm) from 11.48% to 22.92% and pure‐blue emission (470 nm) from 13.39% to 24.12%, with maximum brightness values of 29735 and 91268 cd m −2 .