Daniela Palacios-Lopez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniela Palacios-Lopez has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Thomas Esch
German Aerospace Center (DLR), Wessling, Germany
8 shared publications - Julian Zeidler
German Aerospace Center (DLR), German Remote Sensing Data Center (DFD), Oberpfaffenhofen, D-82234 Wessling, Germany
6 shared publications - Mattia Marconcini
German Aerospace Centre (DLR)
5 shared publications - Stefan Dech
German Aerospace Center (DLR), German Remote Sensing Data Center (DFD), Oberpfaffenhofen, D-82234 Wessling, Germany
5 shared publications - Felix Bachofer
German Aerospace Center (DLR), Earth Observation Center (EOC), 82334 Wessling, Germany
4 shared publications - Alessandro Sorichetta
Dipartimento di Scienze della Terra “A. Desio”, Università degli Studi di Milano, Milan, Italy
3 shared publications
Latest Publications
- 5 June 2025
- Published by SAGE Publications in Environment and Planning B: Urban Analytics and City Science
- Vol. 53 (4) , 915-931
Building Volume per Capita: A Crowding Metric of Housing Disparities in Gauteng, South Africa
In South Africa’s largest city region, located in the province of Gauteng, a key condition of inequality is that high-income households live in large houses while low-income households live in much smaller accommodation. Innovations in earth observation have enabled the modelling of building volumes in cities and this allows for new ways of assessing housing inequalities in Gauteng. This study calculates building volume per capita (BVPC) for the province as an indication of the volume of residential space in which individuals live. It offers five analyses using this data. First, mapping this metric illustrates that townships, informal settlements and inner city high-rise areas have cramped conditions of less than 10 cubic metres per person, while suburbs have a much higher building volume per capita. Second, the article shows that this metric complements traditional calculations of crowding, such as the number of people per room. Third, it calculates the relationship between BVPC and income and shows that the lower-earning three-fifths of households in the province occupy just 13% of the province’s residential building volume, while the higher-earning two-fifths occupy 87% of the province’s building volume. Fourth, it calculates that 51% of residential hexagons in the province fall below the threshold of adequately sized housing as defined by South African housing standards. Finally, it shows that areas that fall below the threshold have a higher proportion of informal housing.
- 5 June 2025
- Published by SAGE Publications in Environment and Planning B: Urban Analytics and City Science
- Vol. 53 (4) , 915-931
Building Volume per Capita: A Crowding Metric of Housing Disparities in Gauteng, South Africa
In South Africa’s largest city region, located in the province of Gauteng, a key condition of inequality is that high-income households live in large houses while low-income households live in much smaller accommodation. Innovations in earth observation have enabled the modelling of building volumes in cities and this allows for new ways of assessing housing inequalities in Gauteng. This study calculates building volume per capita (BVPC) for the province as an indication of the volume of residential space in which individuals live. It offers five analyses using this data. First, mapping this metric illustrates that townships, informal settlements and inner city high-rise areas have cramped conditions of less than 10 cubic metres per person, while suburbs have a much higher building volume per capita. Second, the article shows that this metric complements traditional calculations of crowding, such as the number of people per room. Third, it calculates the relationship between BVPC and income and shows that the lower-earning three-fifths of households in the province occupy just 13% of the province’s residential building volume, while the higher-earning two-fifths occupy 87% of the province’s building volume. Fourth, it calculates that 51% of residential hexagons in the province fall below the threshold of adequately sized housing as defined by South African housing standards. Finally, it shows that areas that fall below the threshold have a higher proportion of informal housing.
- Open Access
- 9 December 2024
- Published by Springer Nature in Journal of Industrial Ecology
- Vol. 29 (1) , 159-172
Weighing the global built environment: High‐resolution mapping and quantification of material stocks in buildings
Buildings provide indispensable services for human well‐being, but their construction and use are responsible for a substantial fraction of societies’ resource requirements and greenhouse gas emissions. Mapping and quantifying the material stocks in buildings is a key research frontier in industrial ecology. Reliable and spatially highly resolved maps of material stocks in buildings worldwide are so far not available. Existing approaches based on nighttime light data allow large‐scale coverage, but their spatial resolution is usually ∼0.5–1 km. Other methods using light detection and ranging (LiDAR) and cadaster data achieve higher resolution and accuracy, but do not allow wall‐to‐wall mapping of large regions. Based on high‐resolution Earth Observation data combined with material intensity factors (kg per m 3 of building volume), we quantify and map material stocks in buildings at the unprecedented resolution of 90 m globally. We distinguish 18 types of materials in five types of buildings. We find that global material stocks in buildings amount to 547 (391–672) Gt, approximately half of total global societal material stocks. We find highly unequal distributions of material stocks in buildings per capita and per unit area of each country. Our results agree well with previous detailed estimates of material stocks in buildings in dedicated regions or individual cities. Improved and harmonized material intensity factors emerge as a key research area for improving the accuracy of material stock maps. Our results are available as data products with high spatial and thematic resolution to facilitate future studies; for example, of secondary resource potentials. This article met the requirements for a gold‐gold JIE data openness badge described at http://jie.click/badges .
- 9 December 2024
- Published by Springer Nature in Journal of Industrial Ecology
- Vol. 29 (1) , 159-172
Open AccessWeighing the global built environment: High‐resolution mapping and quantification of material stocks in buildings
Buildings provide indispensable services for human well‐being, but their construction and use are responsible for a substantial fraction of societies’ resource requirements and greenhouse gas emissions. Mapping and quantifying the material stocks in buildings is a key research frontier in industrial ecology. Reliable and spatially highly resolved maps of material stocks in buildings worldwide are so far not available. Existing approaches based on nighttime light data allow large‐scale coverage, but their spatial resolution is usually ∼0.5–1 km. Other methods using light detection and ranging (LiDAR) and cadaster data achieve higher resolution and accuracy, but do not allow wall‐to‐wall mapping of large regions. Based on high‐resolution Earth Observation data combined with material intensity factors (kg per m 3 of building volume), we quantify and map material stocks in buildings at the unprecedented resolution of 90 m globally. We distinguish 18 types of materials in five types of buildings. We find that global material stocks in buildings amount to 547 (391–672) Gt, approximately half of total global societal material stocks. We find highly unequal distributions of material stocks in buildings per capita and per unit area of each country. Our results agree well with previous detailed estimates of material stocks in buildings in dedicated regions or individual cities. Improved and harmonized material intensity factors emerge as a key research area for improving the accuracy of material stock maps. Our results are available as data products with high spatial and thematic resolution to facilitate future studies; for example, of secondary resource potentials. This article met the requirements for a gold‐gold JIE data openness badge described at http://jie.click/badges .
- Open Access
No Report, No Densification? A Spatiotemporal Analysis of Urban Densification and Reporting Practices in World Heritage Properties
As urbanization accelerates, World Heritage properties, critical conservation areas, face a growing threat of urban densification, jeopardizing their Outstanding Universal Value (OUV). States Parties, the countries that have ratified the World Heritage Convention, are responsible for submitting periodic reports on the state-of-conservation of their World Heritage properties. These reports should explicitly address any instances of urban densification that may be occurring. But do they? This research investigates the relationship between urban densification and reporting practices in World Heritage properties over time and space. Through a spatiotemporal analysis, by analyzing changes in the built-up area within the core zones of cultural World Heritage properties from 1985 to 2015. We found that urban development, including housing, infrastructure, and tourism facilities, has significantly impacted World Heritage properties and an increase in built-up area can be observed especially in properties not reporting on urban threats.
Open AccessNo Report, No Densification? A Spatiotemporal Analysis of Urban Densification and Reporting Practices in World Heritage Properties
As urbanization accelerates, World Heritage properties, critical conservation areas, face a growing threat of urban densification, jeopardizing their Outstanding Universal Value (OUV). States Parties, the countries that have ratified the World Heritage Convention, are responsible for submitting periodic reports on the state-of-conservation of their World Heritage properties. These reports should explicitly address any instances of urban densification that may be occurring. But do they? This research investigates the relationship between urban densification and reporting practices in World Heritage properties over time and space. Through a spatiotemporal analysis, by analyzing changes in the built-up area within the core zones of cultural World Heritage properties from 1985 to 2015. We found that urban development, including housing, infrastructure, and tourism facilities, has significantly impacted World Heritage properties and an increase in built-up area can be observed especially in properties not reporting on urban threats.
- Open Access
- 5 September 2024
- Published by MDPI AG in Preprints.org
How Urban Is World Heritage? An Investigation of Built-up Area Increase in Cultural Heritage Properties
As urbanization continues to increase, key conservation areas like World Heritage sites are being altered. This transformation is a cause for concern as it threatens the Outstanding Universal Value of these sites. To address this issue, a research question was formulated: How urban is World Heritage? The research focused on identifying and monitoring urbanization in heritage core zones listed on the World Heritage by tracking changes in built-up areas from 1985 to 2015. The findings revealed that urban developments, including housing, transport infrastructure construction, visitor accommodation facilities, and land conversions, have significantly impacted heritage properties. More than a third (37\%, 426) of the cultural heritage properties reported urban development, with the highest occurrences in Europe, North America, Asia, and the Pacific. Furthermore, these regions also displayed the highest rate of change per year between 1985 and 2015. This indicates the urgent need to identify and monitor the urbanization of World Heritage to preserve their OUV amidst increasing urban development.
- 5 September 2024
- Published by MDPI AG in Preprints.org
Open AccessHow Urban Is World Heritage? An Investigation of Built-up Area Increase in Cultural Heritage Properties
As urbanization continues to increase, key conservation areas like World Heritage sites are being altered. This transformation is a cause for concern as it threatens the Outstanding Universal Value of these sites. To address this issue, a research question was formulated: How urban is World Heritage? The research focused on identifying and monitoring urbanization in heritage core zones listed on the World Heritage by tracking changes in built-up areas from 1985 to 2015. The findings revealed that urban developments, including housing, transport infrastructure construction, visitor accommodation facilities, and land conversions, have significantly impacted heritage properties. More than a third (37\%, 426) of the cultural heritage properties reported urban development, with the highest occurrences in Europe, North America, Asia, and the Pacific. Furthermore, these regions also displayed the highest rate of change per year between 1985 and 2015. This indicates the urgent need to identify and monitor the urbanization of World Heritage to preserve their OUV amidst increasing urban development.
- Open Access
- 11 January 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (2) , 325
Towards an Improved Large-Scale Gridded Population Dataset: A Pan-European Study on the Integration of 3D Settlement Data into Population Modelling
Large-scale gridded population datasets available at the global or continental scale have become an important source of information in applications related to sustainable development. In recent years, the emergence of new population models has leveraged the inclusion of more accurate and spatially detailed proxy layers describing the built-up environment (e.g., built-area and building footprint datasets), enhancing the quality, accuracy and spatial resolution of existing products. However, due to the consistent lack of vertical and functional information on the built-up environment, large-scale gridded population datasets that rely on existing built-up land proxies still report large errors of under- and overestimation, especially in areas with predominantly high-rise buildings or industrial/commercial areas, respectively. This research investigates, for the first time, the potential contributions of the new World Settlement Footprint—3D (WSF3D) dataset in the field of large-scale population modelling. First, we combined a Random Forest classifier with spatial metrics derived from the WSF3D to predict the industrial versus non-industrial use of settlement pixels at the Pan-European scale. We then examined the effects of including volume and settlement use information into frameworks of dasymetric population modelling. We found that the proposed classification method can predict industrial and non-industrial areas with overall accuracies and a kappa-coefficient of ~84% and 0.68, respectively. Additionally, we found that both, integrating volume and settlement use information considerably increased the accuracy of population estimates between 10% and 30% over commonly employed models (e.g., based on a binary settlement mask as input), mainly by eliminating systematic large overestimations in industrial/commercial areas. While the proposed method shows strong promise for overcoming some of the main limitations in large-scale population modelling, future research should focus on improving the quality of the WFS3D dataset and the classification method alike, to avoid the false detection of built-up settlements and to reduce misclassification errors of industrial and high-rise buildings.
- 11 January 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (2) , 325
Open AccessTowards an Improved Large-Scale Gridded Population Dataset: A Pan-European Study on the Integration of 3D Settlement Data into Population Modelling
Large-scale gridded population datasets available at the global or continental scale have become an important source of information in applications related to sustainable development. In recent years, the emergence of new population models has leveraged the inclusion of more accurate and spatially detailed proxy layers describing the built-up environment (e.g., built-area and building footprint datasets), enhancing the quality, accuracy and spatial resolution of existing products. However, due to the consistent lack of vertical and functional information on the built-up environment, large-scale gridded population datasets that rely on existing built-up land proxies still report large errors of under- and overestimation, especially in areas with predominantly high-rise buildings or industrial/commercial areas, respectively. This research investigates, for the first time, the potential contributions of the new World Settlement Footprint—3D (WSF3D) dataset in the field of large-scale population modelling. First, we combined a Random Forest classifier with spatial metrics derived from the WSF3D to predict the industrial versus non-industrial use of settlement pixels at the Pan-European scale. We then examined the effects of including volume and settlement use information into frameworks of dasymetric population modelling. We found that the proposed classification method can predict industrial and non-industrial areas with overall accuracies and a kappa-coefficient of ~84% and 0.68, respectively. Additionally, we found that both, integrating volume and settlement use information considerably increased the accuracy of population estimates between 10% and 30% over commonly employed models (e.g., based on a binary settlement mask as input), mainly by eliminating systematic large overestimations in industrial/commercial areas. While the proposed method shows strong promise for overcoming some of the main limitations in large-scale population modelling, future research should focus on improving the quality of the WFS3D dataset and the classification method alike, to avoid the false detection of built-up settlements and to reduce misclassification errors of industrial and high-rise buildings.
- Open Access
- 17 March 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (6) , 1142
High-Resolution Gridded Population Datasets: Exploring the Capabilities of the World Settlement Footprint 2019 Imperviousness Layer for the African Continent
The field of human population mapping is constantly evolving, leveraging the increasing availability of high-resolution satellite imagery and the advancements in the field of machine learning. In recent years, the emergence of global built-area datasets that accurately describe the extent, location, and characteristics of human settlements has facilitated the production of new population grids, with improved quality, accuracy, and spatial resolution. In this research, we explore the capabilities of the novel World Settlement Footprint 2019 Imperviousness layer (WSF2019-Imp), as a single proxy in the production of a new high-resolution population distribution dataset for all of Africa—the WSF2019-Population dataset (WSF2019-Pop). Results of a comprehensive qualitative and quantitative assessment indicate that the WSF2019-Imp layer has the potential to overcome the complexities and limitations of top-down binary and multi-layer approaches of large-scale population mapping, by delivering a weighting framework which is spatially consistent and free of applicability restrictions. The increased thematic detail and spatial resolution (~10 m at the Equator) of the WSF2019-Imp layer improve the spatial distribution of populations at local scales, where fully built-up settlement pixels are clearly differentiated from settlement pixels that share a proportion of their area with green spaces, such as parks or gardens. Overall, eighty percent of the African countries reported estimation accuracies with percentage mean absolute errors between ~15% and ~32%, and 50% of the validation units in more than half of the countries reported relative errors below 20%. Here, the remaining lack of information on the vertical dimension and the functional characterisation of the built-up environment are still remaining limitations affecting the quality and accuracy of the final population datasets.
- 17 March 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (6) , 1142
Open AccessHigh-Resolution Gridded Population Datasets: Exploring the Capabilities of the World Settlement Footprint 2019 Imperviousness Layer for the African Continent
The field of human population mapping is constantly evolving, leveraging the increasing availability of high-resolution satellite imagery and the advancements in the field of machine learning. In recent years, the emergence of global built-area datasets that accurately describe the extent, location, and characteristics of human settlements has facilitated the production of new population grids, with improved quality, accuracy, and spatial resolution. In this research, we explore the capabilities of the novel World Settlement Footprint 2019 Imperviousness layer (WSF2019-Imp), as a single proxy in the production of a new high-resolution population distribution dataset for all of Africa—the WSF2019-Population dataset (WSF2019-Pop). Results of a comprehensive qualitative and quantitative assessment indicate that the WSF2019-Imp layer has the potential to overcome the complexities and limitations of top-down binary and multi-layer approaches of large-scale population mapping, by delivering a weighting framework which is spatially consistent and free of applicability restrictions. The increased thematic detail and spatial resolution (~10 m at the Equator) of the WSF2019-Imp layer improve the spatial distribution of populations at local scales, where fully built-up settlement pixels are clearly differentiated from settlement pixels that share a proportion of their area with green spaces, such as parks or gardens. Overall, eighty percent of the African countries reported estimation accuracies with percentage mean absolute errors between ~15% and ~32%, and 50% of the validation units in more than half of the countries reported relative errors below 20%. Here, the remaining lack of information on the vertical dimension and the functional characterisation of the built-up environment are still remaining limitations affecting the quality and accuracy of the final population datasets.
- Open Access
- 25 July 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (15) , 2391
Towards a Large-Scale 3D Modeling of the Built Environment—Joint Analysis of TanDEM-X, Sentinel-2 and Open Street Map Data
Continental to global scale mapping of the human settlement extent based on earth observation satellite data has made considerable progress. Nevertheless, the current approaches only provide a two-dimensional representation of the built environment. Therewith, a full characterization is restricted in terms of the urban morphology and built-up density, which can only be gained by a detailed examination of the vertical settlement extent. This paper introduces a methodology for the extraction of three-dimensional (3D) information on human settlements by analyzing the digital elevation and radar intensity data collected by the German TanDEM-X satellite mission in combination with multispectral Sentinel-2 imagery and data from the Open Street Map initiative and the Global Urban Footprint human settlement mask. The first module of the underlying processor generates a normalized digital surface model from the TanDEM-X digital elevation model for all regions marked as a built-up area by the Global Urban Footprint. The second module generates a building mask based on a joint processing of Open Street Map, TanDEM-X/TerraSAR-X radar images, the calculated normalized digital surface model and Sentinel-2 imagery. Finally, a third module allocates the local relative heights of the normalized digital surface model to the building structures provided by the building mask. The outcome of the procedure is a 3D map of the built environment showing the estimated local height for all identified vertical building structures at 12 m spatial resolution. The results of a first validation campaign based on reference data collected for the seven cities of Amsterdam (NL), Indianapolis (US), Kigali (RW), Munich (DE), New York (US), Vienna (AT), and Washington (US) indicate the potential of the proposed methodology to accurately estimate the distribution of building heights within the built-up area.
- 25 July 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (15) , 2391
Open AccessTowards a Large-Scale 3D Modeling of the Built Environment—Joint Analysis of TanDEM-X, Sentinel-2 and Open Street Map Data
Continental to global scale mapping of the human settlement extent based on earth observation satellite data has made considerable progress. Nevertheless, the current approaches only provide a two-dimensional representation of the built environment. Therewith, a full characterization is restricted in terms of the urban morphology and built-up density, which can only be gained by a detailed examination of the vertical settlement extent. This paper introduces a methodology for the extraction of three-dimensional (3D) information on human settlements by analyzing the digital elevation and radar intensity data collected by the German TanDEM-X satellite mission in combination with multispectral Sentinel-2 imagery and data from the Open Street Map initiative and the Global Urban Footprint human settlement mask. The first module of the underlying processor generates a normalized digital surface model from the TanDEM-X digital elevation model for all regions marked as a built-up area by the Global Urban Footprint. The second module generates a building mask based on a joint processing of Open Street Map, TanDEM-X/TerraSAR-X radar images, the calculated normalized digital surface model and Sentinel-2 imagery. Finally, a third module allocates the local relative heights of the normalized digital surface model to the building structures provided by the building mask. The outcome of the procedure is a 3D map of the built environment showing the estimated local height for all identified vertical building structures at 12 m spatial resolution. The results of a first validation campaign based on reference data collected for the seven cities of Amsterdam (NL), Indianapolis (US), Kigali (RW), Munich (DE), New York (US), Vienna (AT), and Washington (US) indicate the potential of the proposed methodology to accurately estimate the distribution of building heights within the built-up area.
- Open Access
- 31 October 2019
- Published by MDPI AG in Sustainability
- Vol. 11 (21) , 6056
New Perspectives for Mapping Global Population Distribution Using World Settlement Footprint Products
In the production of gridded population maps, remotely sensed, human settlement datasets rank among the most important geographical factors to estimate population densities and distributions at regional and global scales. Within this context, the German Aerospace Centre (DLR) has developed a new suite of global layers, which accurately describe the built-up environment and its characteristics at high spatial resolution: (i) the World Settlement Footprint 2015 layer (WSF-2015), a binary settlement mask; and (ii) the experimental World Settlement Footprint Density 2015 layer (WSF-2015-Density), representing the percentage of impervious surface. This research systematically compares the effectiveness of both layers for producing population distribution maps through a dasymetric mapping approach in nine low-, middle-, and highly urbanised countries. Results indicate that the WSF-2015-Density layer can produce population distribution maps with higher qualitative and quantitative accuracies in comparison to the already established binary approach, especially in those countries where a good percentage of building structures have been identified within the rural areas. Moreover, our results suggest that population distribution accuracies could substantially improve through the dynamic preselection of the input layers and the correct parameterisation of the Settlement Size Complexity (SSC) index.
- 31 October 2019
- Published by MDPI AG in Sustainability
- Vol. 11 (21) , 6056
Open AccessNew Perspectives for Mapping Global Population Distribution Using World Settlement Footprint Products
In the production of gridded population maps, remotely sensed, human settlement datasets rank among the most important geographical factors to estimate population densities and distributions at regional and global scales. Within this context, the German Aerospace Centre (DLR) has developed a new suite of global layers, which accurately describe the built-up environment and its characteristics at high spatial resolution: (i) the World Settlement Footprint 2015 layer (WSF-2015), a binary settlement mask; and (ii) the experimental World Settlement Footprint Density 2015 layer (WSF-2015-Density), representing the percentage of impervious surface. This research systematically compares the effectiveness of both layers for producing population distribution maps through a dasymetric mapping approach in nine low-, middle-, and highly urbanised countries. Results indicate that the WSF-2015-Density layer can produce population distribution maps with higher qualitative and quantitative accuracies in comparison to the already established binary approach, especially in those countries where a good percentage of building structures have been identified within the rural areas. Moreover, our results suggest that population distribution accuracies could substantially improve through the dynamic preselection of the input layers and the correct parameterisation of the Settlement Size Complexity (SSC) index.
- Open Access
- 7 June 2018
- Published by MDPI AG in Remote Sensing
- Vol. 10 (6) , 895
Where We Live—A Summary of the Achievements and Planned Evolution of the Global Urban Footprint
The TerraSAR-X (TSX) mission provides a distinguished collection of high resolution satellite images that shows great promise for a global monitoring of human settlements. Hence, the German Aerospace Center (DLR) has developed the Urban Footprint Processor (UFP) that represents an operational framework for the mapping of built-up areas based on a mass processing and analysis of TSX imagery. The UFP includes functionalities for data management, feature extraction, unsupervised classification, mosaicking, and post-editing. Based on >180.000 TSX StripMap scenes, the UFP was used in 2016 to derive a global map of human presence on Earth in a so far unique spatial resolution of 12 m per grid cell: the Global Urban Footprint (GUF). This work provides a comprehensive summary of the major achievements related to the Global Urban Footprint initiative, with dedicated sections focusing on aspects such as UFP methodology, basic product characteristics (specification, accuracy, global figures on urbanization derived from GUF), the user community, and the already initiated future roadmap of follow-on activities and products. The active community of >250 institutions already working with the GUF data documents the relevance and suitability of the GUF initiative and the underlying high-resolution SAR imagery with respect to the provision of key information on the human presence on earth and the global human settlements properties and patterns, respectively.
- 7 June 2018
- Published by MDPI AG in Remote Sensing
- Vol. 10 (6) , 895
Open AccessWhere We Live—A Summary of the Achievements and Planned Evolution of the Global Urban Footprint
The TerraSAR-X (TSX) mission provides a distinguished collection of high resolution satellite images that shows great promise for a global monitoring of human settlements. Hence, the German Aerospace Center (DLR) has developed the Urban Footprint Processor (UFP) that represents an operational framework for the mapping of built-up areas based on a mass processing and analysis of TSX imagery. The UFP includes functionalities for data management, feature extraction, unsupervised classification, mosaicking, and post-editing. Based on >180.000 TSX StripMap scenes, the UFP was used in 2016 to derive a global map of human presence on Earth in a so far unique spatial resolution of 12 m per grid cell: the Global Urban Footprint (GUF). This work provides a comprehensive summary of the major achievements related to the Global Urban Footprint initiative, with dedicated sections focusing on aspects such as UFP methodology, basic product characteristics (specification, accuracy, global figures on urbanization derived from GUF), the user community, and the already initiated future roadmap of follow-on activities and products. The active community of >250 institutions already working with the GUF data documents the relevance and suitability of the GUF initiative and the underlying high-resolution SAR imagery with respect to the provision of key information on the human presence on earth and the global human settlements properties and patterns, respectively.