RZRan Zhuo

Ran Zhuo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ran Zhuo has a total of 67 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Insulation Design of Gas–Solid Interface at HVDC Condition—Part II: Impacts of Metallic Charged Particles and New Challenges from Eco-Friendly Insulating Gases

    by Bowen Tang, Yi Xu, Ran Zhuo, Ju Tang

    High-voltage direct current gas-insulated equipment (HVDC GIE) is becoming a key component in DC transmission systems due to its compactness and reliability, particularly for cost-effective offshore wind power integration. However, its reliability is compromised by surface charge accumulation at the gas–solid interface—a problem intensified by metallic contaminants and the adoption of eco-friendly gas mixtures. Addressing this challenge requires not only material and design innovations but also the development of standardized testing protocols to validate insulation performance. This review systematically examines the critical, interconnected areas essential for advancing HVDC GIE, focusing on the dynamics of charged metallic particles and their role in charge accumulation, interface charge behavior under alternative gas environments, and experimental methodologies with evolving test standards. By synthesizing insights across these domains, this work aims to provide both theoretical insights and practical guidance for optimizing HVDC GIE insulation design formulating scientifically grounded operation and maintenance strategies.

  • Open Access

    Insulation Design of Gas–Solid Interface at HVDC Condition-Part I: The Research Progress on Surface Charge Accumulation and Dissipation

    by Bowen Tang, Yi Xu, Ran Zhuo, Jiaming Xiong, Ju Tang

    High voltage direct current (HVDC) gas-insulated equipment (GIE) has become a critical component in long-distance power transmission projects, owing to its advantages such as compact structure and high reliability. However, the gas–solid interface insulation of DC GIE under long-term operation faces charge accumulation phenomenon, which will distort the electric field distribution and cause insulation flashover. Due to the lack of technical guidelines for the insulation design of DC gas-insulated equipment, the method of insulation design usually adopts increasing the insulation structure size to ensure sufficient creepage along the surface, which greatly increases the dimensions and manufacturing costs of the final equipment, and fails to fully leverage the unique advantages of GIE in compactness and lightness. Therefore, it is of importance to clarify the mechanism of charge accumulation on the surface of insulators under HVDC, and to propose an insulation design method that can effectively inhibit the charge accumulation and adjust the electric field distribution at the gas–solid interface, which holds practical significance for the safe application of large-scale DC GIE projects. In view of this, this paper firstly summarizes the characteristics of surface charge accumulation at gas–solid interface, and then reviews the existing research progress from two perspectives: surface charge suppression of insulation structure and gas–solid interface electric field regulation, providing theoretical and technical support for optimizing the design of GIE insulation structure, formulating scientific operation and maintenance measures.


  • Characterizing Mn-MOF-74 for Adsorbing HFO-1336 Decomposition Products

    by Dongwei Sun, Ran Zhuo, Nian Tang, Yan Luo, Zhi Li, Dibo Wang, Lianhuan Wu

  • HFO-1336 Hazardous Decomposition Product Adsorbent Material Screening

    by Nian Tang, Yan Luo, Dongwei Sun, Dibo Wang, Manjun Zhang, Ran Zhuo, Yuhang Xue

  • Open Access

    Life Cycle Assessment of Adjustable Permanent Magnet Drives for a Low-Carbon Transition in China’s Coal-Fired Power Systems

    by Yutang Zeng, Jingjin Pan, Meng Gao, Dong Liang, Ran Zhuo, Chuanbin Zhou, Bin Lu

    The industrial motor systems account for 45% of global electricity consumption. A life cycle model is established to quantify the potential environmental benefits of typical adjustable permanent magnet drives (APMDs, 1250 kW) versus variable frequency drives (VFDs) in China. The model covers mining of metals, manufacturing, operation, and recycling phases of APMDs, incorporating empirical data from China’s 3232 coal-fired units. Four scenarios are set up: business-as-usual, moderate, aggressive, and full-retrofit. Key findings demonstrate that APMDs reduce operational energy consumption by 94.5% compared to VFDs through significantly declining frequency conversion losses and cooling requirements. The life cycle carbon emissions of APMDs (29.7 tonnes CO2_eq) represent merely 5% of VFDs emissions (570 tonnes CO2_eq), achieving a 95% reduction. Within APMDs’ footprint, recycling contributes a 45% emission offset (−13.3 tonnes CO2-eq), while operational efficiency drives the majority of the reduction. Sensitivity analysis identifies electricity emission factors, NdFeB production emissions, and metal recycling rates as primary sensitivity drivers (sensitivity index ST = 0.80). Scenario simulations confirm that the aggressive retrofit strategy (covering high- and moderate-potential units) could reduce annual GHG emissions of 3.12 million tonnes CO2_eq., with corresponding 89% decreases in particulate matter (PM). This research demonstrates that APMDs are an effective pathway for the low-carbon transition in coal power systems. Their large-scale implementation can potentially necessitate breakthroughs in tiered retrofit policies, thereby providing crucial technological support for industrial carbon neutrality.


  • Open Access

    Self-Tuning Oxygen Excess Ratio Control for Proton Exchange Membrane Fuel Cells Under Dynamic Conditions

    by Heran Li, Chuanyu Sun, Jing Li, Jian Mei, Jinhai Jiang, Fulin Fan, Weihong Yang, Ran Zhuo, Kai Song

    Reasonable and effective control of a cathode air supply system is conducive to improving the dynamic response, operating efficiency, and reliability of fuel cell systems. This paper proposes a novel data-driven adaptive oxygen excess ratio (OER) control strategy based on online parameter identification for fuel cell systems. The proposed control scheme employs a second-order active disturbance rejection controller (ADRC) derived from the proportional-integral-derivative tuning rule to effectively deal with model uncertainties and external disturbances. Online parameter identification continuously translates the cathode air supply system into the second-order model, enabling the real-time adaptation of controller parameters to varying operating conditions. Simulation results demonstrate that the OER control strategy proposed significantly improves voltage stability and system efficiency under dynamic conditions compared to traditional methods. The innovation of this paper is that, based on consideration of the nonlinear slow time-varying characteristics of a PEMFC and the frequent disturbance of load current, adaptive control under system dynamic conditions can be considered. Combining the parameter identification scheme, an adaptive online self-tuning scheme is designed for the identified system model, which avoids the tediousness of a complex modeling process and has promotion value in practical applications.


  • Open Access

    Advancements and Future Prospects in Ocean Wave Energy Harvesting Technology Based on Micro-Energy Technology

    by Weihong Yang, Jiaxin Peng, Qiulin Chen, Sicheng Zhao, Ran Zhuo, Yan Luo, Lingxiao Gao

    Marine wave energy exhibits significant potential as a renewable resource due to its substantial energy storage capacity and high energy density. However, conventional wave power generation technologies often suffer from drawbacks such as high maintenance costs, cumbersome structures, and suboptimal conversion efficiencies, thereby limiting their potential. The wave power generation technologies based on micro-energy technology have emerged as promising new approaches in recent years, owing to their inherent advantages of cost-effectiveness, simplistic structure, and ease of manufacturing. This paper provides a comprehensive overview of the current research status in wave energy harvesting through micro-energy technologies, including detailed descriptions of piezoelectric nanogenerators, electromagnetic generators, triboelectric nanogenerators, dielectric elastomer generators, hydrovoltaic generators, and hybrid nanogenerators. Finally, we provide a comprehensive overview of the prevailing issues and challenges associated with these technologies, while also offering insights into the future development trajectory of wave energy harvesting technology.