Nobuyuki Nishimori
Research Subjects
Nobuyuki Nishimori has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Hitoshi Tanaka
RIKEN
2 shared publications- Ryoichi Hajima
National Institutes for Quantum and Radiological Science and Technology (QST)
2 shared publications - Masahiro Yamamoto
High Energy Accelerator Research Organization (KEK)
1 shared publication - Masaru Sawamura
National Institutes for Quantum and Radilological Science and Technology, Tokai-mura, Naka-gun, Ibaraki 319-1106, Japan
1 shared publication Ryoji Nagai
National Institutes for Quantum and Radiological Science and Technology, Tokai, Naka, Ibaraki 319-1106, Japan
1 shared publication- Ryoji Nagai
National Institutes for Quantum and Radilological Science and Technology, Tokai-mura, Naka-gun, Ibaraki 319-1106, Japan
1 shared publication
Latest Publications
- Open Access
- 10 December 2022
- Published by Surface Science Society Japan in Vacuum and Surface Science
- Vol. 65 (12) , 560-565
A 3 GeV Light Source “NanoTerasu”
A new 3 GeV light source named “NanoTerasu” is under construction at Aobayama new campus of Tohoku university. NanoTerasu will form a photon science platform together with SPring-8, which covers a wide spectral range from UV to hard X-rays, by delivering brighter and more coherent soft to tender X-rays with superior stability and reliability. Installation of the accelerator system is in progress for the first light in 2023. NanoTerasu employs a four-bend achromat lattice using combined-function bending magnets to achieve a low emittance of about 1 nmrad with a small circumference of 349 m and a beam current of 400 mA. The storage ring consists of 16 cells to provide 28 user beamlines. This paper presents an overview of NanoTerasu and describe details of the storage ring vacuum system.
- 10 December 2022
- Published by Surface Science Society Japan in Vacuum and Surface Science
- Vol. 65 (12) , 560-565
Open AccessA 3 GeV Light Source “NanoTerasu”
A new 3 GeV light source named “NanoTerasu” is under construction at Aobayama new campus of Tohoku university. NanoTerasu will form a photon science platform together with SPring-8, which covers a wide spectral range from UV to hard X-rays, by delivering brighter and more coherent soft to tender X-rays with superior stability and reliability. Installation of the accelerator system is in progress for the first light in 2023. NanoTerasu employs a four-bend achromat lattice using combined-function bending magnets to achieve a low emittance of about 1 nmrad with a small circumference of 349 m and a beam current of 400 mA. The storage ring consists of 16 cells to provide 28 user beamlines. This paper presents an overview of NanoTerasu and describe details of the storage ring vacuum system.
- 23 December 2020
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 60 (1) , 017001
Transparent-grid scheme for generating cathode-emittance-dominated beams in a gridded thermionic gun
A transparent-grid scheme is proposed for generating cathode-emittance-dominated beams in a gridded thermionic gun. In the proposed scheme, the grid emittance arising from the potential difference between the grid and grid-mesh center is suppressed by tuning the grid voltage to the gridless gun potential. We developed a 50 kV gridded thermionic gun that is followed by a 238 MHz cavity for 500 kV acceleration. The measured projected emittance as a function of grid voltage shows a clear minimum approaching the cathode emittance and agrees well with a numerical simulation and a theoretical grid emittance taking into account the longitudinal space-charge effect. The measured minimum emittance for a core part which represents 60% of a 1-nC electron bunch is 1.5 μ m · rad making the transparent-gridded thermionic gun a promising electron source for high brightness beam application such as a soft X-ray free-electron laser.
- 23 December 2020
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 60 (1) , 017001
Transparent-grid scheme for generating cathode-emittance-dominated beams in a gridded thermionic gun
A transparent-grid scheme is proposed for generating cathode-emittance-dominated beams in a gridded thermionic gun. In the proposed scheme, the grid emittance arising from the potential difference between the grid and grid-mesh center is suppressed by tuning the grid voltage to the gridless gun potential. We developed a 50 kV gridded thermionic gun that is followed by a 238 MHz cavity for 500 kV acceleration. The measured projected emittance as a function of grid voltage shows a clear minimum approaching the cathode emittance and agrees well with a numerical simulation and a theoretical grid emittance taking into account the longitudinal space-charge effect. The measured minimum emittance for a core part which represents 60% of a 1-nC electron bunch is 1.5 μ m · rad making the transparent-gridded thermionic gun a promising electron source for high brightness beam application such as a soft X-ray free-electron laser.
- Open Access
- 14 May 2019
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 22 (5) , 053402
Operational experience of a 500 kV photoemission gun
Operational experience of a 500 kV photoemission gun at the compact energy recovery linac (cERL) of the High Energy Accelerator Research Organization is presented. The gun, developed at the Japan Atomic Energy Agency, was found to have failures in two out of the ten-segment ceramic insulator just after installation at cERL. The gun had been operated at 390 kV with eight segments until April 2015 and provided a 0.9 mA beam. An additional two-segment insulator was installed on the top of the existing insulators to recover the high-voltage performance. The gun was then conditioned up to 539 kV and has been operated stably at 500 kV. No discharge caused by the gun itself was observed at 500 kV once the high threshold voltage for stable operation exceeded 500 kV. A dark current of a few picoamperes was generated at 500 kV from a photocathode puck with a semiconducting wafer, while no dark current was observed without a semiconducting wafer. Stable generation of a 500 keV beam with current greater than 0.8 mA was demonstrated for more than two hours.
- 14 May 2019
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 22 (5) , 053402
Open AccessOperational experience of a 500 kV photoemission gun
Operational experience of a 500 kV photoemission gun at the compact energy recovery linac (cERL) of the High Energy Accelerator Research Organization is presented. The gun, developed at the Japan Atomic Energy Agency, was found to have failures in two out of the ten-segment ceramic insulator just after installation at cERL. The gun had been operated at 390 kV with eight segments until April 2015 and provided a 0.9 mA beam. An additional two-segment insulator was installed on the top of the existing insulators to recover the high-voltage performance. The gun was then conditioned up to 539 kV and has been operated stably at 500 kV. No discharge caused by the gun itself was observed at 500 kV once the high threshold voltage for stable operation exceeded 500 kV. A dark current of a few picoamperes was generated at 500 kV from a photocathode puck with a semiconducting wafer, while no dark current was observed without a semiconducting wafer. Stable generation of a 500 keV beam with current greater than 0.8 mA was demonstrated for more than two hours.
- Open Access
Development of a Multialkali Photocathode Dc Gun for a Smith-Purcell Terahertz Free-Electron Laser
We have developed a photocathode dc gun for a compact Smith-Purcell free-electron laser in the terahertz wavelength region. The gun system consists of an alkali antimonide photocathode preparation chamber, a dc gun with a 250 kV-50 mA Cockcroft-Walton high-voltage power supply, and a downstream beamline with a water-cooled beam dump to accommodate a beam power of 5 kW. We fabricated a Cs3Sb photocathode with quantum efficiency of 5.8% at a wavelength of 532 nm and generated a 150 keV beam with current of up to 4.3 mA with a 500 mW laser. A vacuum chamber for the Smith-Purcell free-electron laser has been installed in the downstream beamline. We describe the present status of our work.
Open AccessDevelopment of a Multialkali Photocathode Dc Gun for a Smith-Purcell Terahertz Free-Electron Laser
We have developed a photocathode dc gun for a compact Smith-Purcell free-electron laser in the terahertz wavelength region. The gun system consists of an alkali antimonide photocathode preparation chamber, a dc gun with a 250 kV-50 mA Cockcroft-Walton high-voltage power supply, and a downstream beamline with a water-cooled beam dump to accommodate a beam power of 5 kW. We fabricated a Cs3Sb photocathode with quantum efficiency of 5.8% at a wavelength of 532 nm and generated a 150 keV beam with current of up to 4.3 mA with a 500 mW laser. A vacuum chamber for the Smith-Purcell free-electron laser has been installed in the downstream beamline. We describe the present status of our work.