Lennart Waalkes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Lennart Waalkes has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Claus Emmelmann
Institute of Laser and Systems Technology, Hamburg University of Technology, Am Schwarzenberg-Campus 1, 21073 Hamburg, Germany
2 shared publications - Philipp Imgrund
Fraunhofer Research Institution for Additive Manufacturing Technologies IAPT, 21029 Hamburg, Germany
2 shared publications - Christian Schumacher
Institute for Engineering Design, Technische Universität Braunschweig, Brunswick 38106, Germany
1 shared publication - Hagen Watschke
TU Braunschweig, Institute for Engineering Design, 38106 Braunschweig, Germany
1 shared publication - Jan Längerich
Fraunhofer Research Institution for Additive Manufacturing Technologies IAPT, Am Schleusengraben 14, 21029 Hamburg, Germany
1 shared publication Kevin Janzen
Fraunhofer IAPT
1 shared publication
Latest Publications
- Open Access
- 15 March 2025
- Published by Japan Society of Powder and Powder Metallurgy in Journal of the Japan Society of Powder and Powder Metallurgy
- Vol. 72 (Supplement) , S1009-S1014
In-situ Density Prediction in Metal Binder Jetting Using Powder Bed Imaging
- 15 March 2025
- Published by Japan Society of Powder and Powder Metallurgy in Journal of the Japan Society of Powder and Powder Metallurgy
- Vol. 72 (Supplement) , S1009-S1014
Open AccessIn-situ Density Prediction in Metal Binder Jetting Using Powder Bed Imaging
- Open Access
Influence of Different Powder Conditioning Strategies on Metal Binder Jetting with Ti-6Al-4V
Metal binder jetting shows great potential for medical technology. This potential can be exploited by integrating binder jetting into existing process routes known from metal injection molding. The biggest challenge here is the flowability and packing behavior of the powders used, due to their low size distributions. This paper investigates different powder-drying strategies to improve flowability using a statistical experimental design. Because of its relevance for medical applications, spherical Ti-6Al-4V powder with a size distribution under 25 µm is dried under various parameters using vacuum and gas purging. The investigated parameters, time and temperature, are selected in a central-composite-circumscribed test plan with eleven tests and three center points. The target parameters—water content, flowability and impurity levels (oxygen, nitrogen)—of the powder are analyzed. For validation, practical test trials are carried out on an industrial binder jetting system with unconditioned powder and conditioning with optimized parameters, comparing the manufactured parts and the powder bed. An optimized drying cycle with a duration of 6 h at 200 °C was determined for the investigated powder. Significant improvements in the dimensional accuracy (from ±1.5 to 0.3%) of the components and the visual impression of the powder bed are demonstrated.
Open AccessInfluence of Different Powder Conditioning Strategies on Metal Binder Jetting with Ti-6Al-4V
Metal binder jetting shows great potential for medical technology. This potential can be exploited by integrating binder jetting into existing process routes known from metal injection molding. The biggest challenge here is the flowability and packing behavior of the powders used, due to their low size distributions. This paper investigates different powder-drying strategies to improve flowability using a statistical experimental design. Because of its relevance for medical applications, spherical Ti-6Al-4V powder with a size distribution under 25 µm is dried under various parameters using vacuum and gas purging. The investigated parameters, time and temperature, are selected in a central-composite-circumscribed test plan with eleven tests and three center points. The target parameters—water content, flowability and impurity levels (oxygen, nitrogen)—of the powder are analyzed. For validation, practical test trials are carried out on an industrial binder jetting system with unconditioned powder and conditioning with optimized parameters, comparing the manufactured parts and the powder bed. An optimized drying cycle with a duration of 6 h at 200 °C was determined for the investigated powder. Significant improvements in the dimensional accuracy (from ±1.5 to 0.3%) of the components and the visual impression of the powder bed are demonstrated.
- 1 February 2023
- Published by Springer Nature
- p. 153-156
Zusammenfassung und Ausblick
- 1 February 2023
- Published by Springer Nature
- p. 5-40
Stand der Wissenschaft und Technik
- 1 February 2023
- Published by Springer Nature
- p. 99-122
Anlagenspezifische Konstruktionsregeln
- 1 February 2023
- Published by Springer Nature
- p. 1-3
Einleitung
- 1 February 2023
- Published by Springer Nature
- p. 141-152
Einsatz im MIM-Produktionsbetrieb
- 1 February 2023
- Published by Springer Nature
- p. 41-45
Forschungsbedarf und Lösungsweg
- 1 February 2023
- Published by Springer Nature
- p. 123-140
Vergleich der Sinterteilqualität
- 1 February 2023
- Published by Springer Nature
- p. 75-98
Experimentelle Prozessentwicklung