DKDoni Mohana Krishnudu

Doni Mohana Krishnudu

*This is an algorithmically generated author record based on publicly available information.

Doni Mohana Krishnudu has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Eco-friendly thermo-dielectric epoxy composites based on abutilon indicum plant fibers

    by D Mohana Krishnudu, P Venkateshwar Reddy, Rv Saikumar Reddy, Ac Umamaheshwer Rao, Vijay Kumar Mahakur

    Recently, natural fiber composites (NFC) are increasingly recognized for their biodegradability, cost-effectiveness, and lower ecological footprint as opposed to synthetic equivalents. The research looks at the attributes of Abutilon indicum fiber-based composites, with an emphasis on their potential as sustainable materials. The fibers underwent treatment with sodium hydroxide to increase their interface adherence to the matrix. The hand layup process has been employed to generate composites with fiber concentrations of 10%, 20%, and 30%. Dynamic Mechanical Analysis (DMA) became utilized for assessing viscoelastic parameters at a temperature range of 28 °C–190 °C. The results have showed that the 20% fiber-based specimen has improved mechanical traits, including maximal storage modulus and ideal damping characteristics, which are attributable to improved crystallinity and effective fiber-matrix collaboration. Furthermore, dielectric characteristics are assessed, demonstrating that the dielectric constant dropped with increasing frequency, with the maximum value observed for the 20% composite. The results imply that Abutilon indicum fiber-based material have promised thermal stability, thus rendering them appropriate for a wide range of purposes in sectors seeking ecologically conscious materials. This study adds to our knowledge of NFC and its ability to substitute synthetic materials in composite manufacture.

  • Open Access

    Impact of Alkali Treatment on the Mechanical Properties of Sorghum Fiber Reinforced Epoxy Composites

    by Venkata Saikumar Reddy Ravipati, Lakshmana Rao Jeeru, Mohana Krishnudu Doni, Venkateshwar Reddy Pathapalli

  • Effect of CaCO3 filler reinforcement on PLA matrix composites fabricated through injection moulding

    by D Mohana Krishnudu, P Venkateshwar Reddy, M Vijay Kumar, R V Saikumar Reddy, A C Umamaheshwer Rao

    Since a decade, the usage of traditional polymers and synthetic fibres has increased rapidly. Therefore, it becomes increasingly important to implement biodegradable polymer composites and strict plastic usage guidelines in order to address a range of environmental and safety issues. This article discusses in detail about the use of bio-degradable material like Poly Lactic Acid(PLA) as the matrix and calcium carbonate as the reinforcement used in preparing composite laminates through injection moulding technique.The influence of the CaCO3 on the mechanical properties, as well as the degradation behaviour of the developed specimens was explored by employing Universal testing machine (UTM) and Thermo-gravimetric analysis (TGA), respectively. The bonding of the functional compounds within the selected substances were observed through Scanning electron microscopy (SEM) and Fourier transformation infrared (FTIR) spectroscopy, respectively. The conclusions revealed that putting up to 15 wt% of CaCO3 to a PLA medium boosted the mechanical properties and the specimen containing 10 wt% of CaCO3 improved thermal persistence and received the deterioration point at nearly 245 °C–250 °C. Only traces of residue were found in the composites as determined by TGA. In conclusion, it can be said that the incorporation of powder, permitted the development of biodegradable materials with better specific properties which can possibly be leveraged in lieu of traditional resources in a variety of industrial applications.


  • Granite Powder Influence on the Static Mechanical Properties of Tapsi fiber-reinforced Hybrid Composites: A Comparative Study

    by R. Meenakshi Reddy, B. Madhusudhan Reddy, P. Venkateshwar Reddy, D. Mohana Krishnudu, R V Saikumar Reddy

    Strength, weight, stiffness, environmental friendliness, and ease of manufacture are the key considerations for the selection of materials for today’s engineering applications. In this study, the hybrid composite was developed by reinforcing the alkali-treated tapsi fiber and micro granite filler into a polyester matrix using the hand lay-up method. Tapsi fiber is inexpensive, available in abundance, and the necessary amount of fiber needs to be prepared with minimal effort. Micro granite powder is one of the unused industrial wastes produced by the granite industry. Five different hybrid composite samples were created by keeping the tapsi fiber content constant at 20 wt.% and altering the micro granite powder content in polyester resin from 0 wt.% to 20 wt.%. Mechanical properties such as tensile, flexural, and impact strengths were evaluated to assess the hybrid composite’s load-bearing capabilities. Other characterizations such as FTIR and SEM are conducted to verify the applicability of hybrid composites in temperature, chemical, and humid environments. In addition, the tracing of chemical bonds for hybrid composites can be done using Fourier Transform Infrared Spectroscopy (FTIR). The load-bearing capacity and transferability of the hybrid composite were solely based on the bonding of the fiber reinforcement, the filler, and polymer resin.


  • Parameters Selection for Enhanced Mechanical and Wear Properties of Natural Fiber Reinforced Hybrid Composites Using PSI Technique

    by P. Venkateshwar Reddy, P. Srinivasa Rao, D. Mohana Krishnudu, R. V. Saikumar Reddy, A. Eswara Kumar

    Natural fibers are being used more often for composite preparation these days. Natural fiber-reinforced polymer composites have been used in a wide range of engineering domains due to their significant benefits over synthetic fiber composites. The interfacial interaction with the matrix content and water absorption are two main disadvantages of using natural fibers. The effects of natural fibers (Abutilon indicum, luffa cylindrica, and Prosopis juliflora), chemical treatments (NaOH, KOH, and silane), and fillers (CaCO3, Al2O3, and TiO2) on mechanical and wear properties were investigated in this study. The silane-treated fiber-reinforced composite outperformed the other two treatments and untreated fiber-reinforced composites in terms of mechanical properties. In the present study, multicriteria decision-making (MCDM) approaches were used to cope with the difficulty of choosing good estimate over a wide variety of opportunities. The predicted optimal combinations for good mechanical and wear outputs of the composite were chosen using a performance selection index (PSI) process. Characterizations such as FTIR and SEM are conducted to verify the applicability of hybrid composites in temperature, chemical, and humid environments. The bonding between the treated fibers and matrix strengthened with fiber treatment and filler addition, according to the SEM study.


  • Enhancement of the Dynamic Mechanical and Dielectric Properties ofProsopis julifloraFiber-Reinforced Composites by Fiber Modification

    by P. Venkateshwar Reddy, R. V. Saikumar Reddy, B. Veerabhadra Reddy, D. Mohana Krishnudu, P. Rajendra Prasad, P. Srinivasa Rao

    The utilization of the plant-based fiber-reinforced composites is being increased in recent days. The plant-based fiber used in the present study was extracted from the Prosopis juliflora plant. Alkali treatment effects of the fiber-reinforced composites on the static and dynamic mechanical and dielectric properties were investigated and compared with the untreated fiber-reinforced composites in the current work. Tests like static and dynamic mechanical, dielectrical, scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) were carried out on both treated and untreated composite specimens. The temperature was varied from 25°C to a maximum temperature of 180°C to investigate the dynamic mechanical properties at a constant frequency of 2 Hz. Dielectric properties were also analyzed using impedance analyzer and compared the results of both treated and untreated composites. Characterization techniques like SEM, TGA, and XRD were carried out on both the treated and untreated composite specimens to probe the bonding and crystallinity among the composites. The results of SEM and XRD showed that the bonding and crystallinity improved with the fiber treatment such that the thermal stability also improved. The improved properties of the composite samples extend the applications in the field of automotive, packaging, construction, etc.


  • Evaluation of Mechanical and Wear Performances of Natural Fiber Reinforced Epoxy Composites

    by P. Venkateshwar Reddy, R. V. Saikumar Reddy, P. Rajendra Prasad, D. Mohana Krishnudu, H. Raghavendra Rao

    The possible usage of natural fiber reinforced composites (NFC) for various industrial applications is being explored. In the present work, mechanical and wear behavior of three different NFCs were analyzed. Natural fibers like prosopis juliflora (PJ), abuliton indicum (AI), and tapsi (T) fibers in the form of straws were considered in the present study. Composites were fabricated for three different fibers with 20 wt.% by hand layup method. Mechanical tests like tensile, flexural, and impact were performed along with tribological tests. Tensile and flexural were performed on universal testing machine, impact on izod impact tester, and wear test on pin-on-disc test setup. Wear tests on the fabricated composite samples were performed with varying the process parameters like sliding speed and applied load with a maximum sliding distance of 3000 m. SEM analysis was also performed on the fractured and worn out samples to know the bonding behavior, failure, and material removal mechanism of three NFCs. Among all the NFCs, prosopis juliflora fiber attained an improved mechanical and wear behaviors when contrasted to the other two NFCs.


  • Alkali Treatment Influence on Characterization of Setaria Italic (Foxtail Millet) Fiber Reinforced Polymer Composites Using Vacuum Bagging

    by R. V. Saikumar Reddy, D. Mohana Krishnudu, P. Rajendra Prasad, P. Venkateshwar Reddy

    Natural fiber polymer composites have broad interest in recent times due to low cost and superior mechanical properties. The present study deals with Setaria italic (Foxtail millet) fiber reinforced Lapox L-12 resin polymer composite fabricated by vacuum bagging method. The work examined the differences of NaOH alkali-treated (5% and 10% concentration) and untreated fibers with different weight ratios (10%, 15%, and 20%) of fibers. Mechanical properties of the prepared discrete polymer composite materials were analyzed. The alkali treatment behavior of Setaria italic fiber was analyzed using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR). An increase in 35.1%, 8.6%, and 6% for tensile, flexural, and impact strength, respectively, were observed for 20 wt% reinforced composites with 10% NaOH treatment when compared to untreated composites. From TGA, it was concluded that residue content of the samples were observed to be 15%, 10%, and 7% for untreated, 5% NaOH-treated and 10% NaOH-treated samples, respectively. Based on the acquired results, it was concluded that alkali-treated Setaria italic (Foxtail millet) fiber reinforced epoxy composites can be a resourceful substitute in construction and building applications.