Lu Yan
Lu Yan has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Du Juan
Shanghai Dianji University, Shanghai, China
5 shared publicationsDing En-Jie
The National Joint Engineering Laboratory of Internet Applied Technology of Mines, China University of Mining and Technology, Xuzhou, China
2 shared publicationsLiu Ke
Shandong Energy Zibo Mining Group Information Center, Shandong, China
2 shared publicationsTao Xian
Institute of Automation, Chinese Academy of Sciences, Beijing, China
2 shared publications- Bo Wang
School of Materials Science and Engineering, University of Jinan, Jinan 250022, China
1 shared publication Chen Guo Chu
School of Electrical Engineering, Shanghai Dianji University, Shanghai, China
1 shared publication
Latest Publications
- Open Access
- 6 May 2023
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 15 (5)
Mechanical varying non-stationary signal separation method based on instantaneous frequency estimation
Mechanical equipment often works on variable speed condition, its corresponding vibration signal presents multi-component, modulation coupling with fast time-varying instantaneous frequency (IF), how to effectively compute IF and realize fasting varying non-stationary signal decoupling separation plays an important role in mechanical system fault diagnosis. In this paper, a sparse representation method called multi-scale chirp sparse representation (MSCSR) is introduced to identify, extract, and trend IF for achieving a highly concentrated time-frequency energy. Simulation demonstrates that the proposed method performs better than traditional IF estimation method. Furthermore, an adaptive time-varying filter is constructed using the extracted instantaneous frequency to decouple non-stationary fast signal. Ultimately, by rapid instantaneous frequency fluctuation experiment, the effectiveness of proposed method for fast strong time-varying signal is validated, it can effectively extract rapid oscillation instantaneous frequency, and the error is less than 10%.
- 6 May 2023
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 15 (5)
Open AccessMechanical varying non-stationary signal separation method based on instantaneous frequency estimation
Mechanical equipment often works on variable speed condition, its corresponding vibration signal presents multi-component, modulation coupling with fast time-varying instantaneous frequency (IF), how to effectively compute IF and realize fasting varying non-stationary signal decoupling separation plays an important role in mechanical system fault diagnosis. In this paper, a sparse representation method called multi-scale chirp sparse representation (MSCSR) is introduced to identify, extract, and trend IF for achieving a highly concentrated time-frequency energy. Simulation demonstrates that the proposed method performs better than traditional IF estimation method. Furthermore, an adaptive time-varying filter is constructed using the extracted instantaneous frequency to decouple non-stationary fast signal. Ultimately, by rapid instantaneous frequency fluctuation experiment, the effectiveness of proposed method for fast strong time-varying signal is validated, it can effectively extract rapid oscillation instantaneous frequency, and the error is less than 10%.
- Open Access
- 17 November 2022
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 14 (11)
Enhancement and extraction of periodic transient based on hybrid intelligent fusion algorithm and its application in rolling bearing fault detection
Weak fault detection of rolling bearing presents difficult, because the periodic transient signature produced via localized incipient damage is easily submerged by various interference components and background noise. Hybrid intelligent fusion method is a breakthrough strategy for revealing feature frequency of rolling bearing fault by comprehensively using a variety of intelligent signal processing technologies, possessing the advantage of each technology. Considering the rolling bearing often construct a transmission device combination with gear and shaft, its vibration signal is often vulnerable to other multi-morphology components, such as harmonic modulation, noise. Thus, how to identify the fault frequency in repetitive transients is crucial to accurately identify rolling bearing fault detection. To address this issue, a novel hybrid intelligent method is proposed to effectively apply on periodic transients extraction, enhancement and rolling bearing fault diagnosis. The innovation of this method is to solve three problems, namely, the separation of multi-morphology components, noise reduction without periodic transients distortion, weak fault frequency enhancement. The proposed method is tested and validated on simulated signal, rolling bearing fault signal from accelerated rolling bearing degradation rig. In addition, comparisons with other classical rolling bearing fault detection methods have been conducted to highlight the superiority of the proposed methodology.
- 17 November 2022
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 14 (11)
Open AccessEnhancement and extraction of periodic transient based on hybrid intelligent fusion algorithm and its application in rolling bearing fault detection
Weak fault detection of rolling bearing presents difficult, because the periodic transient signature produced via localized incipient damage is easily submerged by various interference components and background noise. Hybrid intelligent fusion method is a breakthrough strategy for revealing feature frequency of rolling bearing fault by comprehensively using a variety of intelligent signal processing technologies, possessing the advantage of each technology. Considering the rolling bearing often construct a transmission device combination with gear and shaft, its vibration signal is often vulnerable to other multi-morphology components, such as harmonic modulation, noise. Thus, how to identify the fault frequency in repetitive transients is crucial to accurately identify rolling bearing fault detection. To address this issue, a novel hybrid intelligent method is proposed to effectively apply on periodic transients extraction, enhancement and rolling bearing fault diagnosis. The innovation of this method is to solve three problems, namely, the separation of multi-morphology components, noise reduction without periodic transients distortion, weak fault frequency enhancement. The proposed method is tested and validated on simulated signal, rolling bearing fault signal from accelerated rolling bearing degradation rig. In addition, comparisons with other classical rolling bearing fault detection methods have been conducted to highlight the superiority of the proposed methodology.
- Open Access
- 18 April 2022
- Published by Springer Nature in Research Square
Research on Multi-source Sparse Optimization Method and Its Application On Polymorphic-oscillatory signal separation
In general, during the whole life cycle operation of mechanical system, its corresponding condition signal often presents multi-component polymorphic-oscillatory characteristic and is accompanied with strong interference noise. In order to identify system operating status, how to achieve polymorphic signal decomposition is an unavoidable focus. Weak signal features corrupted by heavy background noise can be effectively extracted through sparse decomposition. In order to solve the problems of classical sparse decomposition method, such as the lack of signal fidelity, the local optimal solution caused by the non-convex objective function, and the poor universality of the model, a novel multi-source sparse optimization objective function with convexity is constructed based on the generalized mini-max concave penalty function. Then the sparse coefficients of unilateral attenuation transient component, bilateral attenuation transient component and harmonic component are calculated respectively based on Laplace wavelet dictionary, Morlet wavelet dictionary and DFT dictionary using forward backward splitting algorithm. Ultimately, each distinct component can be extracted based on these sparse coefficients. Comparison with the classical resonance sparse signal decomposition (RSSD) based on L1-norm, signal adaptive decomposition and spectral kurtosis show that the proposed method can accurately preserve the amplitude of morphological components under the low SNR premise. Experimental case infers that the proposed method compared with double tree complex wavelet (DTCW) possesses potential value of application on mechanical system fault detection without the prior knowledge of specific number of faults.
- 18 April 2022
- Published by Springer Nature in Research Square
Open AccessResearch on Multi-source Sparse Optimization Method and Its Application On Polymorphic-oscillatory signal separation
In general, during the whole life cycle operation of mechanical system, its corresponding condition signal often presents multi-component polymorphic-oscillatory characteristic and is accompanied with strong interference noise. In order to identify system operating status, how to achieve polymorphic signal decomposition is an unavoidable focus. Weak signal features corrupted by heavy background noise can be effectively extracted through sparse decomposition. In order to solve the problems of classical sparse decomposition method, such as the lack of signal fidelity, the local optimal solution caused by the non-convex objective function, and the poor universality of the model, a novel multi-source sparse optimization objective function with convexity is constructed based on the generalized mini-max concave penalty function. Then the sparse coefficients of unilateral attenuation transient component, bilateral attenuation transient component and harmonic component are calculated respectively based on Laplace wavelet dictionary, Morlet wavelet dictionary and DFT dictionary using forward backward splitting algorithm. Ultimately, each distinct component can be extracted based on these sparse coefficients. Comparison with the classical resonance sparse signal decomposition (RSSD) based on L1-norm, signal adaptive decomposition and spectral kurtosis show that the proposed method can accurately preserve the amplitude of morphological components under the low SNR premise. Experimental case infers that the proposed method compared with double tree complex wavelet (DTCW) possesses potential value of application on mechanical system fault detection without the prior knowledge of specific number of faults.
- Open Access
- 18 April 2022
- Published by Springer Nature in Research Square
Multi-scale chirp sparse representation for autonomous system non-stationary signal with Fast Varying Instantaneous Frequency
Autonomous system is an emerging AI technology based on latest advances in intelligence, cognition, computing and systems science without human intervention, which is widely applied in the field of Internet of things, mechanical condition monitoring system and so on. With the rapid development of industry 4.0, autonomous system’s natural characteristic and application field determine that its corresponding signal presents multi-component, modulation coupling, non-stationary feature with fast time-varying instantaneous frequency (IF). Considering non-stationary signal contains system state information, how to effectively compute IF and realize signal decoupling separation plays an important role in autonomous system perception and making decision. In this paper, a sparse representation method called multi-scale chirp sparse representation (MSCSR) is introduced to to identify, extract and trend IF for achieving a highly concentrated time-frequency energy comparable to the standard IF estimation methods, simulation demonstrates that the proposed method performs better than traditional Hilbert-Huang transform and variational mode decomposition(VMD) combination with synchrosqueezing wavelet transform. Furthermore, an adaptive time-varying filter is constructed using the extracted instantaneous frequency to decouple non-stationary fast signal. Ultimately, by rapid instantaneous frequency fluctuation experiment, the effectiveness of proposed method for fast strong time-varying signal is validated, it can effectively extract rapid oscillation instantaneous frequency, and the error is less than 5%.
- 18 April 2022
- Published by Springer Nature in Research Square
Open AccessMulti-scale chirp sparse representation for autonomous system non-stationary signal with Fast Varying Instantaneous Frequency
Autonomous system is an emerging AI technology based on latest advances in intelligence, cognition, computing and systems science without human intervention, which is widely applied in the field of Internet of things, mechanical condition monitoring system and so on. With the rapid development of industry 4.0, autonomous system’s natural characteristic and application field determine that its corresponding signal presents multi-component, modulation coupling, non-stationary feature with fast time-varying instantaneous frequency (IF). Considering non-stationary signal contains system state information, how to effectively compute IF and realize signal decoupling separation plays an important role in autonomous system perception and making decision. In this paper, a sparse representation method called multi-scale chirp sparse representation (MSCSR) is introduced to to identify, extract and trend IF for achieving a highly concentrated time-frequency energy comparable to the standard IF estimation methods, simulation demonstrates that the proposed method performs better than traditional Hilbert-Huang transform and variational mode decomposition(VMD) combination with synchrosqueezing wavelet transform. Furthermore, an adaptive time-varying filter is constructed using the extracted instantaneous frequency to decouple non-stationary fast signal. Ultimately, by rapid instantaneous frequency fluctuation experiment, the effectiveness of proposed method for fast strong time-varying signal is validated, it can effectively extract rapid oscillation instantaneous frequency, and the error is less than 5%.
- Open Access
Study of Construction and Performance on Photoelectric Devices of Cs–Pb–Br Perovskite Quantum Dot
White LEDs were encapsulated using Cs4PbBr6 quantum dots and Gd2O3:Eu red phosphor as lamp powder. Under the excitation of a GaN chip, the color coordinates of the W-LED were (0.33, 0.34), and the color temperature was 5752 K, which is close to the color coordinate and color temperature range of standard sunlight. The electric current stability was excellent with an increase in the electric current, voltage, and luminescence intensity of the quantum dots and phosphors by more than 10 times. However, the stability of the quantum dots was slightly insufficient over long working periods. The photocatalytic devices were constructed using TiO2, CsPbBr3, and NiO as an electron transport layer, light absorption layer, and catalyst, respectively. The Cs–Pb–Br-based perovskite quantum dot photocatalytic devices were constructed using a two-step spin coating method, one-step spin coating method, and full PLD technology. In order to improve the water stability of the device, a hydrophobic carbon paste and carbon film were selected as the hole transport layer. The TiO2 layer and perovskite layer with different thicknesses and film forming qualities were obtained by changing the spin coating speed. The influence of the spin coating speed on the device’s performance was explored through SEM and a J–V curve to find the best spin coating process. The device constructed by the two-step spin coating method had a higher current density but no obvious increase in the current density under light, while the other two methods could obtain a more obvious light response, but the current density was very low.
Open AccessStudy of Construction and Performance on Photoelectric Devices of Cs–Pb–Br Perovskite Quantum Dot
White LEDs were encapsulated using Cs4PbBr6 quantum dots and Gd2O3:Eu red phosphor as lamp powder. Under the excitation of a GaN chip, the color coordinates of the W-LED were (0.33, 0.34), and the color temperature was 5752 K, which is close to the color coordinate and color temperature range of standard sunlight. The electric current stability was excellent with an increase in the electric current, voltage, and luminescence intensity of the quantum dots and phosphors by more than 10 times. However, the stability of the quantum dots was slightly insufficient over long working periods. The photocatalytic devices were constructed using TiO2, CsPbBr3, and NiO as an electron transport layer, light absorption layer, and catalyst, respectively. The Cs–Pb–Br-based perovskite quantum dot photocatalytic devices were constructed using a two-step spin coating method, one-step spin coating method, and full PLD technology. In order to improve the water stability of the device, a hydrophobic carbon paste and carbon film were selected as the hole transport layer. The TiO2 layer and perovskite layer with different thicknesses and film forming qualities were obtained by changing the spin coating speed. The influence of the spin coating speed on the device’s performance was explored through SEM and a J–V curve to find the best spin coating process. The device constructed by the two-step spin coating method had a higher current density but no obvious increase in the current density under light, while the other two methods could obtain a more obvious light response, but the current density was very low.
- Open Access
- 16 January 2020
- Published by SAGE Publications in Measurement and Control
- Vol. 53 (3-4) , 601-612
Periodic impulse signal separation based on resonance-based sparse signal decomposition and its application to the fault detection of rolling bearing
The main purpose of the paper is to propose a new method to achieve separating periodic impulse signal among multi-component mixture signal and its application to the fault detection of rolling bearing. In general, as local defects occur in a rotating machinery, the vibration signal always consists of periodic impulse components along with other components such as harmonic component and noise; impulse component reflects the condition of rolling bearing. However, different components of multi-component mixture signal may approximately have same center frequency and bandwidth coincides with each other that is difficult to disentangle by linear frequency-based filtering. In order to solve this problem, the author introduces a proposed method based on resonance-based sparse signal decomposition integrated with empirical mode decomposition and demodulation that can separate the impulse component from the signal, according to the different Q-factors of impulse component and harmonic component. Simulation and application examples have proved the effectiveness of the method to achieve fault detection of rolling bearing and signal preprocessing.
- 16 January 2020
- Published by SAGE Publications in Measurement and Control
- Vol. 53 (3-4) , 601-612
Open AccessPeriodic impulse signal separation based on resonance-based sparse signal decomposition and its application to the fault detection of rolling bearing
The main purpose of the paper is to propose a new method to achieve separating periodic impulse signal among multi-component mixture signal and its application to the fault detection of rolling bearing. In general, as local defects occur in a rotating machinery, the vibration signal always consists of periodic impulse components along with other components such as harmonic component and noise; impulse component reflects the condition of rolling bearing. However, different components of multi-component mixture signal may approximately have same center frequency and bandwidth coincides with each other that is difficult to disentangle by linear frequency-based filtering. In order to solve this problem, the author introduces a proposed method based on resonance-based sparse signal decomposition integrated with empirical mode decomposition and demodulation that can separate the impulse component from the signal, according to the different Q-factors of impulse component and harmonic component. Simulation and application examples have proved the effectiveness of the method to achieve fault detection of rolling bearing and signal preprocessing.
- Open Access
- 28 June 2019
- Published by SAGE Publications in Measurement and Control
- Vol. 52 (7-8) , 1111-1121
Fault diagnosis of rolling bearing based on resonance-based sparse signal decomposition with optimal Q-factor
When a localized defect is induced, the vibration signal of rolling bearing always consists periodic impulse component accompanying with other components such as harmonic interference and noise. However, the incipient impulse component is often submerged under harmonic interference and background noise. To address the aforementioned issue, an improved method based on resonance-based sparse signal decomposition with optimal quality factor (Q-factor) is proposed in this paper. In this method, the optimal Q-factor is obtained first by genetic algorithm aiming at maximizing kurtosis value of low-resonance component of vibration signal. Then, the vibration signal is decomposed based on resonance-based sparse signal decomposition with optimal Q-factor. Finally, the low-resonance component is analyzed by empirical model decomposition combination with energy operator demodulating; the fault frequency can be achieved evidently. Simulation and application examples show that the proposed method is effective on extracting periodic impulse component from multi-component mixture vibration signal.
- 28 June 2019
- Published by SAGE Publications in Measurement and Control
- Vol. 52 (7-8) , 1111-1121
Open AccessFault diagnosis of rolling bearing based on resonance-based sparse signal decomposition with optimal Q-factor
When a localized defect is induced, the vibration signal of rolling bearing always consists periodic impulse component accompanying with other components such as harmonic interference and noise. However, the incipient impulse component is often submerged under harmonic interference and background noise. To address the aforementioned issue, an improved method based on resonance-based sparse signal decomposition with optimal quality factor (Q-factor) is proposed in this paper. In this method, the optimal Q-factor is obtained first by genetic algorithm aiming at maximizing kurtosis value of low-resonance component of vibration signal. Then, the vibration signal is decomposed based on resonance-based sparse signal decomposition with optimal Q-factor. Finally, the low-resonance component is analyzed by empirical model decomposition combination with energy operator demodulating; the fault frequency can be achieved evidently. Simulation and application examples show that the proposed method is effective on extracting periodic impulse component from multi-component mixture vibration signal.
- Open Access
- 17 April 2019
- Published by SAGE Publications in Measurement and Control
- Vol. 52 (5-6) , 441-448
A regression model for prediction of idler rotational resistance on belt conveyor
This paper presents a regression model for prediction of idler rotational resistance on belt conveyor. The advantage of the regression model is that it is created according to the real experimental measurement. Besides, the predicted model corresponds with real operational parameters, such as radial force, rotational speed and measurements, conducted via using a laboratory test facility; several criteria have been used to verify the presented regression model. Finally, by analyzing the regression model combined with influence of radical force and rotational resistance on idler rotational resistance, this paper presents an operable control ideal to achieve energy-saving.
- 17 April 2019
- Published by SAGE Publications in Measurement and Control
- Vol. 52 (5-6) , 441-448
Open AccessA regression model for prediction of idler rotational resistance on belt conveyor
This paper presents a regression model for prediction of idler rotational resistance on belt conveyor. The advantage of the regression model is that it is created according to the real experimental measurement. Besides, the predicted model corresponds with real operational parameters, such as radial force, rotational speed and measurements, conducted via using a laboratory test facility; several criteria have been used to verify the presented regression model. Finally, by analyzing the regression model combined with influence of radical force and rotational resistance on idler rotational resistance, this paper presents an operable control ideal to achieve energy-saving.
- Open Access
- 5 July 2018
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 10 (7)
Investigation on indentation rolling resistance of belt conveyor based on Hertz contact theory compared with one-dimensional Winkler foundation
Based on Hertz contact theory and one-dimensional Winkler foundation combination with viscoelastic theory, the author derived theoretical formulas of indentation rolling resistance, respectively. Using the laboratorial apparatus of indentation rolling resistance, the author mainly concentrates on the error analysis about two kinds of theoretical formula which bear on indentation rolling resistance compared with experimental result. The reason why author employs Hertz contact theory to discuss indentation rolling resistance is that indentation rolling resistance is a sort of contact resistance. As a result, Hertz contact theory is generally applicable to study it. On the other hand, because conveyor belt has viscoelastic property, it is appropriate to use viscoelastic theory by the aid of three-parameter Maxwell viscoelastic model combination with one-dimensional Winkler foundation. Ultimately, this article infers that theoretical formula based on the Hertz contact is brief and clear compared with one-dimensional Winkler foundation in principle. However, it is noticeable that when the belt is at high speed, the reliability of formula based on Hertz theory has decreased obviously. This conclusion can give a beneficial reference for the energy saving of belt conveyor.
- 5 July 2018
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 10 (7)
Open AccessInvestigation on indentation rolling resistance of belt conveyor based on Hertz contact theory compared with one-dimensional Winkler foundation
Based on Hertz contact theory and one-dimensional Winkler foundation combination with viscoelastic theory, the author derived theoretical formulas of indentation rolling resistance, respectively. Using the laboratorial apparatus of indentation rolling resistance, the author mainly concentrates on the error analysis about two kinds of theoretical formula which bear on indentation rolling resistance compared with experimental result. The reason why author employs Hertz contact theory to discuss indentation rolling resistance is that indentation rolling resistance is a sort of contact resistance. As a result, Hertz contact theory is generally applicable to study it. On the other hand, because conveyor belt has viscoelastic property, it is appropriate to use viscoelastic theory by the aid of three-parameter Maxwell viscoelastic model combination with one-dimensional Winkler foundation. Ultimately, this article infers that theoretical formula based on the Hertz contact is brief and clear compared with one-dimensional Winkler foundation in principle. However, it is noticeable that when the belt is at high speed, the reliability of formula based on Hertz theory has decreased obviously. This conclusion can give a beneficial reference for the energy saving of belt conveyor.
- 3 April 2017
- Published by Emerald Publishing in Journal of Engineering, Design and Technology
- Vol. 15 (2) , 254-267
Investigation on influence of speed on rolling resistance of belt conveyor based on viscoelastic property of rubber
Purpose: As indentation rolling resistance accounts for the major part of the total resistance of belt conveyors, the purpose of this paper is to compute it using a proper method. Design/methodology/approach: First, an approximate formula for computing indentation rolling resistance is offered. In this formula, a one-dimensional Winkler foundation and a three-parameter viscoelastic Maxwell solid model of the belt backing material are used to determine the resistance to the motion of a conveyor belt over idlers. The velocity of the belt is an important operating parameter in the working conditions of the belt conveyor. What is more, a set of experimental apparatus which can measure the value of indentation rolling resistance is designed. Findings: With the help of the experimental apparatus, the authors obtained a series of measured data under different belt speeds. Finally, a computation example that is provided for a typical rubber compound backing material shows the comparison between measured results and theoretical results which offers the influence of speed on rolling resistance. Originality/value: This study provides the design of an apparatus, and finds the relationship between belt speed and indentation rolling resistance.
- 3 April 2017
- Published by Emerald Publishing in Journal of Engineering, Design and Technology
- Vol. 15 (2) , 254-267
Investigation on influence of speed on rolling resistance of belt conveyor based on viscoelastic property of rubber
Purpose: As indentation rolling resistance accounts for the major part of the total resistance of belt conveyors, the purpose of this paper is to compute it using a proper method. Design/methodology/approach: First, an approximate formula for computing indentation rolling resistance is offered. In this formula, a one-dimensional Winkler foundation and a three-parameter viscoelastic Maxwell solid model of the belt backing material are used to determine the resistance to the motion of a conveyor belt over idlers. The velocity of the belt is an important operating parameter in the working conditions of the belt conveyor. What is more, a set of experimental apparatus which can measure the value of indentation rolling resistance is designed. Findings: With the help of the experimental apparatus, the authors obtained a series of measured data under different belt speeds. Finally, a computation example that is provided for a typical rubber compound backing material shows the comparison between measured results and theoretical results which offers the influence of speed on rolling resistance. Originality/value: This study provides the design of an apparatus, and finds the relationship between belt speed and indentation rolling resistance.