Jun Kue Park
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jun Kue Park has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
Jae Sang Lee
Korea Multi-purpose Accelerator Complex, Korea Atomic Energy Research Institute, Gyeongju, Korea
5 shared publicationsJaekwon Suk
5 shared publicationsWon-Je Cho
Korea Multi-purpose Accelerator Complex, Korea Atomic Energy Research Institute, Gyeongju, Korea
5 shared publicationsChorong Kim
Korea Multi-purpose Accelerator Complex, Korea Atomic Energy Research Institute, Gyeongju, Korea
4 shared publicationsHye Min Jang
Korea Multi-purpose Accelerator Complex, Korea Atomic Energy Research Institute, Gyeongju, Korea
4 shared publicationsMyung-Hwan Jung
Korea Multi-purpose Accelerator Complex, Korea Atomic Energy Research Institute, Gyeongju, Korea
4 shared publications
Latest Publications
- 7 July 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1078
A shallow acceptor complex in Al-doped ZnO using N+ ion beam irradiation
- 7 July 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1078
A shallow acceptor complex in Al-doped ZnO using N+ ion beam irradiation
- Open Access
- 26 November 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (5)
Ion‐Beam‐Induced Biaxial Tensile Strain Engineering in Nanoscale Zinc Oxide Films on Silicon Dioxide
Strain engineering is a powerful tool for adjusting the electrical and optical properties of materials, particularly in 2D materials on flexible polymer substrates. However, current strain‐engineering techniques are primarily utilized for thin 2D materials on flexible substrates, with limited research on thicker materials on traditional substrates. In this study, the enhancement in electrical properties resulting from strain effects in 30‐nm‐thick ZnO films deposited on SiO2 wafers through N2 ion beam irradiation is proposed. The N2 ion beam, at an optimal energy level, induces strain in the underlying SiO2 layer, leading to a 2.5‐fold increase in the saturation mobility and charge‐carrier density of the overlying ZnO film. Density functional theory calculations reveal that the introduction of N2 molecules into the SiO2 crystal induces biaxial lattice expansion, which, in turn, strains the overlying ZnO film. These findings demonstrate the effective application of strain engineering in films of relatively large thickness, even on traditional substrates. It is anticipated that this strain engineering approach using ion‐beam irradiation will significantly broaden the range of applications for strain engineering technology.
- 26 November 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (5)
Open AccessIon‐Beam‐Induced Biaxial Tensile Strain Engineering in Nanoscale Zinc Oxide Films on Silicon Dioxide
Strain engineering is a powerful tool for adjusting the electrical and optical properties of materials, particularly in 2D materials on flexible polymer substrates. However, current strain‐engineering techniques are primarily utilized for thin 2D materials on flexible substrates, with limited research on thicker materials on traditional substrates. In this study, the enhancement in electrical properties resulting from strain effects in 30‐nm‐thick ZnO films deposited on SiO2 wafers through N2 ion beam irradiation is proposed. The N2 ion beam, at an optimal energy level, induces strain in the underlying SiO2 layer, leading to a 2.5‐fold increase in the saturation mobility and charge‐carrier density of the overlying ZnO film. Density functional theory calculations reveal that the introduction of N2 molecules into the SiO2 crystal induces biaxial lattice expansion, which, in turn, strains the overlying ZnO film. These findings demonstrate the effective application of strain engineering in films of relatively large thickness, even on traditional substrates. It is anticipated that this strain engineering approach using ion‐beam irradiation will significantly broaden the range of applications for strain engineering technology.
- Open Access
- 13 July 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-9
Cross-section measurements for 68Zn(p,2p)67Cu and 68Zn(p,2n)67Ga reactions using a newly developed separation method for the superposed $\gamma$-ray spectraWe have developed a new analytical peak separation analysis for superposed \(\gamma\)-ray peaks on \(^{67}\)Cu and \(^{67}\)Ga to measure the \(^{68}\)Zn(p,2p)\(^{67}\)Cu and \(^{68}\)Zn(p,2n)\(^{67}\)Ga reactions, unlike in most previous works that were employing a radiochemical separation to measure them. Based on the nuclear data such as the \(\gamma\)-ray intensity and the half-life for each nuclide, we may develop a new analytical method that enables us to estimate the respective counts arising from each nuclide, thereby obtaining the nuclear reactions. The newly developed analytical method can universally be applied to separate the superposed \(\gamma\)-ray spectra of any two nuclides, especially superior in separating the nuclides with different half-lives. In comparison with the data in the literature, the two reactions in the present work are in good agreement with those of some previous works. In addition, we compared the present \(^{68}\)Zn(p,2n)\(^{67}\)Ga reaction without the peak separation to the data in the literature without the chemical separation, and find that a good agreement is evident, enhancing the reliability of the \(^{68}\)Zn(p,x)\(^{65}\)Zn and \(^{68}\)Zn(p,3n)\(^{66}\)Ga reactions, which are further measured in the present work- 13 July 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-9
Open AccessCross-section measurements for 68Zn(p,2p)67Cu and 68Zn(p,2n)67Ga reactions using a newly developed separation method for the superposed $\gamma$-ray spectraWe have developed a new analytical peak separation analysis for superposed \(\gamma\)-ray peaks on \(^{67}\)Cu and \(^{67}\)Ga to measure the \(^{68}\)Zn(p,2p)\(^{67}\)Cu and \(^{68}\)Zn(p,2n)\(^{67}\)Ga reactions, unlike in most previous works that were employing a radiochemical separation to measure them. Based on the nuclear data such as the \(\gamma\)-ray intensity and the half-life for each nuclide, we may develop a new analytical method that enables us to estimate the respective counts arising from each nuclide, thereby obtaining the nuclear reactions. The newly developed analytical method can universally be applied to separate the superposed \(\gamma\)-ray spectra of any two nuclides, especially superior in separating the nuclides with different half-lives. In comparison with the data in the literature, the two reactions in the present work are in good agreement with those of some previous works. In addition, we compared the present \(^{68}\)Zn(p,2n)\(^{67}\)Ga reaction without the peak separation to the data in the literature without the chemical separation, and find that a good agreement is evident, enhancing the reliability of the \(^{68}\)Zn(p,x)\(^{65}\)Zn and \(^{68}\)Zn(p,3n)\(^{66}\)Ga reactions, which are further measured in the present work - Open Access
- 24 January 2023
- Published by Springer Nature in Research Square
Cross-section measurements for 68Zn(p,2p)67Cu and 68Zn(p,2n)67Ga reactions using a newly developed separation method for the superposed γ-ray spectra
We have developed a new analytical peak separation analysis for superposed γ-ray peaks on 67Cu and 67Ga to measure the 68Zn(p,2p)67Cu and 68Zn(p,2n)67Ga reactions, unlike in most previous works that were employing a radiochemical separation to measure them. Based on the nuclear data such as the γ-ray intensity and the half-life for each nuclide, we may develop a new analytical method that enables us to estimate the respective counts arising from each nuclide, thereby obtaining the nuclear reactions. In comparison with the data in the literature, the two reactions in the present work are in good agreement with those of some previous works. In addition, we compared the present 68Zn(p,2n)67Ga reaction without the peak separation to the data in the literature without the chemical separation, and find that a good agreement is evident, enhancing the reliability of the 68Zn(p,x)65Zn and 68Zn(p,3n)66Ga reactions, which are further measured in the present work.
- 24 January 2023
- Published by Springer Nature in Research Square
Open AccessCross-section measurements for 68Zn(p,2p)67Cu and 68Zn(p,2n)67Ga reactions using a newly developed separation method for the superposed γ-ray spectra
We have developed a new analytical peak separation analysis for superposed γ-ray peaks on 67Cu and 67Ga to measure the 68Zn(p,2p)67Cu and 68Zn(p,2n)67Ga reactions, unlike in most previous works that were employing a radiochemical separation to measure them. Based on the nuclear data such as the γ-ray intensity and the half-life for each nuclide, we may develop a new analytical method that enables us to estimate the respective counts arising from each nuclide, thereby obtaining the nuclear reactions. In comparison with the data in the literature, the two reactions in the present work are in good agreement with those of some previous works. In addition, we compared the present 68Zn(p,2n)67Ga reaction without the peak separation to the data in the literature without the chemical separation, and find that a good agreement is evident, enhancing the reliability of the 68Zn(p,x)65Zn and 68Zn(p,3n)66Ga reactions, which are further measured in the present work.
- Open Access
- 14 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (16) , 2791
Chelator-Free Copper-64-Incorporated Iron Oxide Nanoparticles for PET/MR Imaging: Improved Radiocopper Stability and Cell Viability
We have developed chelator-free copper-64-incorporated iron oxide (IO) nanoparticle (NPs) which have both magnetic and radioactive properties being applied to positron emission tomography (PET)-magnetic resonance imaging (MRI). We have found that the IO nanoparticles composed of radioactive isotope 64Cu may act as a contrast agent being a diagnostic tool for PET as well as a good T2 MRI nanoprobe due to their good r2/r1 ratio. Furthermore, we demonstrate that the 64Cu incorporation at the core of core-shell-structured IO NPs exhibits a good in vivo stability, giving us an insightful strategy for the design of a contrast agent for the PET-MRI system.
- 14 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (16) , 2791
Open AccessChelator-Free Copper-64-Incorporated Iron Oxide Nanoparticles for PET/MR Imaging: Improved Radiocopper Stability and Cell Viability
We have developed chelator-free copper-64-incorporated iron oxide (IO) nanoparticle (NPs) which have both magnetic and radioactive properties being applied to positron emission tomography (PET)-magnetic resonance imaging (MRI). We have found that the IO nanoparticles composed of radioactive isotope 64Cu may act as a contrast agent being a diagnostic tool for PET as well as a good T2 MRI nanoprobe due to their good r2/r1 ratio. Furthermore, we demonstrate that the 64Cu incorporation at the core of core-shell-structured IO NPs exhibits a good in vivo stability, giving us an insightful strategy for the design of a contrast agent for the PET-MRI system.
- Open Access
- 19 January 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (5) , 2531-2535
NMR probe of suppressed bulk conductivity in the topological insulator Bi0.5Sb1.5Te3
We investigated insulating behaviors in the bulk of the topological insulator Bi0.5Sb1.5Te3 varying in particle size using 125Te NMR spectroscopy, within the framework of a theoretical relaxation model of the Dirac electron system.
- 19 January 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (5) , 2531-2535
Open AccessNMR probe of suppressed bulk conductivity in the topological insulator Bi0.5Sb1.5Te3
We investigated insulating behaviors in the bulk of the topological insulator Bi0.5Sb1.5Te3 varying in particle size using 125Te NMR spectroscopy, within the framework of a theoretical relaxation model of the Dirac electron system.
- Open Access
- 11 October 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-7
Enhanced anomalous magnetization in carbonyl iron by Ni+ ion beam irradiation
We investigate the magnetic properties in carbonyl iron (CI) particles before and after Ni $$^{+}$$ and H $$^{+}$$ ion beam irradiation. Upon increasing temperatures, the saturation magnetization ( $$M_{\text {s}}$$ ) in hysteresis loops exhibits an anomalous increase at a high temperature for the unirradiated and the Ni $$^{+}$$ -beam-irradiated samples, unlike in H $$^{+}$$ -beam-irradiated sample. Moreover, the magnetization values at low and high temperatures are more intense after Ni $$^{+}$$ beam irradiation, whereas after H $$^{+}$$ beam irradiation those are remarkably suppressed. Hematite ( $$\alpha $$ -Fe $$_{2}$$ O $$_{3}$$ ) phase introduced on the surface of our CI particles undergoes the Morin transition that was observed in our magnetization-temperature curves. The Morin transition causing canted antiferromagnetism above the Morin temperature was found in the unirradiated and Ni $$^{+}$$ -beam-irradiated samples, but not in H $$^{+}$$ -beam-irradiated sample. It is thus revealed that the CI particles undergoing the Morin transition cause the anomalous increase in $$M_{\text {s}}$$ . We may suggest that Ni $$^{+}$$ ion beam increases uncompensated surface spins on the CI particles resulting in a more steep Morin transition and the intensified $$M_{\text {s}}$$ . Ion-beam irradiation may thus be a good tool for controlling the magnetic properties of CI particles, tailoring our work for future applications.- 11 October 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-7
Open AccessEnhanced anomalous magnetization in carbonyl iron by Ni+ ion beam irradiation
We investigate the magnetic properties in carbonyl iron (CI) particles before and after Ni $$^{+}$$ and H $$^{+}$$ ion beam irradiation. Upon increasing temperatures, the saturation magnetization ( $$M_{\text {s}}$$ ) in hysteresis loops exhibits an anomalous increase at a high temperature for the unirradiated and the Ni $$^{+}$$ -beam-irradiated samples, unlike in H $$^{+}$$ -beam-irradiated sample. Moreover, the magnetization values at low and high temperatures are more intense after Ni $$^{+}$$ beam irradiation, whereas after H $$^{+}$$ beam irradiation those are remarkably suppressed. Hematite ( $$\alpha $$ -Fe $$_{2}$$ O $$_{3}$$ ) phase introduced on the surface of our CI particles undergoes the Morin transition that was observed in our magnetization-temperature curves. The Morin transition causing canted antiferromagnetism above the Morin temperature was found in the unirradiated and Ni $$^{+}$$ -beam-irradiated samples, but not in H $$^{+}$$ -beam-irradiated sample. It is thus revealed that the CI particles undergoing the Morin transition cause the anomalous increase in $$M_{\text {s}}$$ . We may suggest that Ni $$^{+}$$ ion beam increases uncompensated surface spins on the CI particles resulting in a more steep Morin transition and the intensified $$M_{\text {s}}$$ . Ion-beam irradiation may thus be a good tool for controlling the magnetic properties of CI particles, tailoring our work for future applications. - Open Access
- 28 July 2021
- Published by Springer Nature in Research Square
Enhanced Magnetization in a Frustrated Spin System by Ni+ Ion Beam Irradiation
We investigate the magnetic properties in a frustrated spin system of carbonyl iron (CI) particles before and after Ni+ ion beam irradiation. Upon increasing temperatures, the saturation magnetization exhibits an anomalous increase, which is more intense after the beam irradiation. The zero-field cooled (ZFC) magnetization data show an anomalous increase up to 300 K, regardless of the beam irradiation. After the irradiation, unlike in the unirradiated CI particles, the ZFC curve shows separated regimes, reflecting two distributions of the blocking temperature, which may be related to the particle distribution summed with two distribution functions. After the irradiation, strong interparticle interaction may be present due to the effect of dipolar interaction among CI particles doped Ni ions, leading to the enhanced magnetization. We may suggest that the anomalous magnetization behavior can be ascribed to frustration in the internal magnetic order for the unirradiated CI particles, and further interparticle interaction for the irradiated CI particles.
- 28 July 2021
- Published by Springer Nature in Research Square
Open AccessEnhanced Magnetization in a Frustrated Spin System by Ni+ Ion Beam Irradiation
We investigate the magnetic properties in a frustrated spin system of carbonyl iron (CI) particles before and after Ni+ ion beam irradiation. Upon increasing temperatures, the saturation magnetization exhibits an anomalous increase, which is more intense after the beam irradiation. The zero-field cooled (ZFC) magnetization data show an anomalous increase up to 300 K, regardless of the beam irradiation. After the irradiation, unlike in the unirradiated CI particles, the ZFC curve shows separated regimes, reflecting two distributions of the blocking temperature, which may be related to the particle distribution summed with two distribution functions. After the irradiation, strong interparticle interaction may be present due to the effect of dipolar interaction among CI particles doped Ni ions, leading to the enhanced magnetization. We may suggest that the anomalous magnetization behavior can be ascribed to frustration in the internal magnetic order for the unirradiated CI particles, and further interparticle interaction for the irradiated CI particles.
- 1 September 2020
- Published by Korean Physical Society in Journal of the Korean Physical Society
- Vol. 77 (5) , 395-398
Precision Control for Beam Irradiation Dose by Developing a Real-time Dose Monitoring System
We have developed a real-time dose monitoring system for a low-energy ion-beam facility. Before we developed the monitoring system, the system had given a substantial error of +/- 23% when we irradiated an ion beam with a dose as much as 3.0 x 1016 cm-2 on the Si substrate. Moreover, a low irradiation dose as small as 1013 cm-2 was scarcely able to be controlled because of a too short irradiation time of several seconds, producing a greater dose error. To develop a real-time dose monitoring system, in this work, we employed a current integrator in conjunction with a beam stopper, by which a dose of 3.0 x1016 cm-2 can be exactly irradiated on the sample with less than +/- 6% error, which was ensured by the measurements of Rutherford backscattering spectroscopy.
- 1 September 2020
- Published by Korean Physical Society in Journal of the Korean Physical Society
- Vol. 77 (5) , 395-398
Precision Control for Beam Irradiation Dose by Developing a Real-time Dose Monitoring System
We have developed a real-time dose monitoring system for a low-energy ion-beam facility. Before we developed the monitoring system, the system had given a substantial error of +/- 23% when we irradiated an ion beam with a dose as much as 3.0 x 1016 cm-2 on the Si substrate. Moreover, a low irradiation dose as small as 1013 cm-2 was scarcely able to be controlled because of a too short irradiation time of several seconds, producing a greater dose error. To develop a real-time dose monitoring system, in this work, we employed a current integrator in conjunction with a beam stopper, by which a dose of 3.0 x1016 cm-2 can be exactly irradiated on the sample with less than +/- 6% error, which was ensured by the measurements of Rutherford backscattering spectroscopy.