Zhenjiao Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhenjiao Sun has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Hui Ma
School of Safety and Engineering, China University of Mining and Technology, Xuzhou 221116, China
7 shared publications - Guanguo Ma
College of Safety and Environmental Engineering, Shandong University of Science and Technology, Qingdao 266590, China
6 shared publications - Kang Gao
College of Safety and Environmental Engineering, Shandong University of Science and Technology, Qingdao 266590, China
3 shared publications - Lianjun Chen
College of Safety and Environmental Engineering, Shandong University of Science and Technology, Qingdao 266590, China
2 shared publications Pengcheng Li
School of Civil Engineering, Qingdao University of Technology, Qingdao, 266520, China
2 shared publicationsChuanjiu Zhang
Guoneng Shendong Coal Group Co., Ltd., National Energy Group, Ordos, 017200, China
1 shared publication
Latest Publications
- Open Access
Experimental Study on the Flow Regime Evolution of Stiff Shotcrete Materials in Pneumatic Conveying
Pneumatic conveying of stiff shotcrete material plays a crucial role in mine support; however, the flow regime evolution mechanism of its complex multi-scale particle system during conveying remains insufficiently studied. This study establishes a customized pneumatic conveying experimental platform, integrating a high-speed camera and pressure sensors to systematically investigate the flow regime evolution and characteristics of stiff shotcrete material under different operating parameters. Experimental results indicate that air velocity and water–cement ratio significantly influence flow regime evolution: at low air velocities, the material primarily exhibits dune flow and stratified flow. As the air velocity increases to 475 m3/h, the flow regime gradually transitions to suspended flow. An increase in the water–cement ratio significantly enhances liquid bridge forces between particles, intensifying particle agglomeration and making the bottom-layer flow characteristics more pronounced. Additionally, pipe diameter plays a crucial role in flow regime distribution, with suspended flow dominating in smaller pipes and bottom-layer flow becoming more prominent in larger pipes. In the downstream section of the elbow, the abrupt decrease in airflow velocity causes the flow regime to degrade from suspended flow to bottom-layer flow, leading to significant particle deposition. This study reveals the flow regime evolution patterns of stiff shotcrete material in pneumatic conveying, providing essential experimental evidence and theoretical support for optimizing long-distance pneumatic conveying systems in mine support applications.
Open AccessExperimental Study on the Flow Regime Evolution of Stiff Shotcrete Materials in Pneumatic Conveying
Pneumatic conveying of stiff shotcrete material plays a crucial role in mine support; however, the flow regime evolution mechanism of its complex multi-scale particle system during conveying remains insufficiently studied. This study establishes a customized pneumatic conveying experimental platform, integrating a high-speed camera and pressure sensors to systematically investigate the flow regime evolution and characteristics of stiff shotcrete material under different operating parameters. Experimental results indicate that air velocity and water–cement ratio significantly influence flow regime evolution: at low air velocities, the material primarily exhibits dune flow and stratified flow. As the air velocity increases to 475 m3/h, the flow regime gradually transitions to suspended flow. An increase in the water–cement ratio significantly enhances liquid bridge forces between particles, intensifying particle agglomeration and making the bottom-layer flow characteristics more pronounced. Additionally, pipe diameter plays a crucial role in flow regime distribution, with suspended flow dominating in smaller pipes and bottom-layer flow becoming more prominent in larger pipes. In the downstream section of the elbow, the abrupt decrease in airflow velocity causes the flow regime to degrade from suspended flow to bottom-layer flow, leading to significant particle deposition. This study reveals the flow regime evolution patterns of stiff shotcrete material in pneumatic conveying, providing essential experimental evidence and theoretical support for optimizing long-distance pneumatic conveying systems in mine support applications.
- Open Access
Study on Slipform Paving of Concrete Containing Alkali-Free Accelerators on Roadway Floor
Aiming at the problems of collapse, deformation, and displacement in the concrete paving of roadway floors, this paper adopts the way of adding alkali-free accelerators to the concrete on both sides, through mechanical analysis, single factor experiment, orthogonal experiment, and polynomial fitting method, and determines the relevant parameters of concrete and accelerators in the sliding form paving of roadway floor from two aspects of paving material and size. The results show that the FSA-AF alkali-free liquid accelerator is more suitable for roadway floor paving than the J85 powder accelerator. When the FSA-AF accelerator dosage reaches 8%, the decreasing trend of initial setting time curve tends to be flat. The deformation resistance of concrete containing accelerator is positively correlated with the dosage of the accelerator. Concrete side pressure is positively correlated with pavement paving height. The FSA-AF accelerator can reduce the compressive strength of concrete; the compressive strength and retention rate of concrete at all ages are the highest when the dosage of FSA-AF is 7%. A water–cement ratio of 0.4 and a 9% dosage of accelerator are the optimal combination to meet the four evaluation indexes. According to the width estimation formula, the width of the side concrete should be set to 14 cm.
Open AccessStudy on Slipform Paving of Concrete Containing Alkali-Free Accelerators on Roadway Floor
Aiming at the problems of collapse, deformation, and displacement in the concrete paving of roadway floors, this paper adopts the way of adding alkali-free accelerators to the concrete on both sides, through mechanical analysis, single factor experiment, orthogonal experiment, and polynomial fitting method, and determines the relevant parameters of concrete and accelerators in the sliding form paving of roadway floor from two aspects of paving material and size. The results show that the FSA-AF alkali-free liquid accelerator is more suitable for roadway floor paving than the J85 powder accelerator. When the FSA-AF accelerator dosage reaches 8%, the decreasing trend of initial setting time curve tends to be flat. The deformation resistance of concrete containing accelerator is positively correlated with the dosage of the accelerator. Concrete side pressure is positively correlated with pavement paving height. The FSA-AF accelerator can reduce the compressive strength of concrete; the compressive strength and retention rate of concrete at all ages are the highest when the dosage of FSA-AF is 7%. A water–cement ratio of 0.4 and a 9% dosage of accelerator are the optimal combination to meet the four evaluation indexes. According to the width estimation formula, the width of the side concrete should be set to 14 cm.
- Open Access
Research on Compressive Strength of Manufactured Sand Concrete Based on Response Surface Methodology
Due to the impact of economic and social development on the environment, there is an increasing demand for manufactured sand to replace natural sand as fine aggregate for concrete. At the same time, the effect of admixtures on the rheological properties and compressive strength of concrete is crucial in civil engineering applications. In this study, with the Box–Behnken test model, we analyzed and investigated the impact of a composite admixture of stone powder (SP), pulverized fuel ash (PFA), and silicon fume (SF) on the compressive strength of siliceous manufactured sand concrete using response surface methodology (RSM). At the same time, the rheological properties of the siliceous artificial sand and river sand concrete were analyzed. The prediction of the compressive strength of siliceous artificial sand concrete was developed using multiple regression analysis, the factors of which were SP, PFA, and SF content, and the response value was compressive strength. Furthermore, response surface and contour lines were used to analyze the impact of composite admixtures. It is shown that the compounding of SP, PFA, and SF improve the rheological properties of manufactured sand concrete. For the single factor, SP has the greatest effect on the compressive strength of mechanism sand concrete and SF has the least effect. For compounding, SP and PFA have the most significant effect on the compressive strength of artificial sand shotcrete, and the compounding of PFA and SF have the least effect.
Open AccessResearch on Compressive Strength of Manufactured Sand Concrete Based on Response Surface Methodology
Due to the impact of economic and social development on the environment, there is an increasing demand for manufactured sand to replace natural sand as fine aggregate for concrete. At the same time, the effect of admixtures on the rheological properties and compressive strength of concrete is crucial in civil engineering applications. In this study, with the Box–Behnken test model, we analyzed and investigated the impact of a composite admixture of stone powder (SP), pulverized fuel ash (PFA), and silicon fume (SF) on the compressive strength of siliceous manufactured sand concrete using response surface methodology (RSM). At the same time, the rheological properties of the siliceous artificial sand and river sand concrete were analyzed. The prediction of the compressive strength of siliceous artificial sand concrete was developed using multiple regression analysis, the factors of which were SP, PFA, and SF content, and the response value was compressive strength. Furthermore, response surface and contour lines were used to analyze the impact of composite admixtures. It is shown that the compounding of SP, PFA, and SF improve the rheological properties of manufactured sand concrete. For the single factor, SP has the greatest effect on the compressive strength of mechanism sand concrete and SF has the least effect. For compounding, SP and PFA have the most significant effect on the compressive strength of artificial sand shotcrete, and the compounding of PFA and SF have the least effect.
- Open Access
An Experimental Study on the Elbow Pressure Drop and Conveying Stability of Pneumatic Conveying for Stiff Shotcrete Based on Response Surface Methodology
The pressure drop and conveying stability caused by the bend significantly affect the pneumatic conveying process of stiff shotcrete, which is the key to solving the problem of long-distance transportation. In this paper, the effects of different air velocities (32 m/s, 36 m/s, 40 m/s), water-cement ratios (0.1, 0.2, and 0.3), and bending-diameter ratios (4, 12, and 20) on the pressure drop of the elbow R1 and conveying stability R2 are studied using the response surface method. The conveying stability is characterized by the pressure variation coefficient (C.V). The response surface graph aids in the intuitive analysis of the effects of these variables. The results show that the impact of air velocity on R1 and R2 is exceptionally significant, and the interaction of each factor on the response value is analyzed. The response value and the quadratic polynomial regression equation between the various factors are obtained in addition to the flow characteristics of stiff shotcrete under different working conditions. The relationship established by the statistical processing of the experimental results can provide some reference for specifying the pressure loss model of stiff shotcrete.
Open AccessAn Experimental Study on the Elbow Pressure Drop and Conveying Stability of Pneumatic Conveying for Stiff Shotcrete Based on Response Surface Methodology
The pressure drop and conveying stability caused by the bend significantly affect the pneumatic conveying process of stiff shotcrete, which is the key to solving the problem of long-distance transportation. In this paper, the effects of different air velocities (32 m/s, 36 m/s, 40 m/s), water-cement ratios (0.1, 0.2, and 0.3), and bending-diameter ratios (4, 12, and 20) on the pressure drop of the elbow R1 and conveying stability R2 are studied using the response surface method. The conveying stability is characterized by the pressure variation coefficient (C.V). The response surface graph aids in the intuitive analysis of the effects of these variables. The results show that the impact of air velocity on R1 and R2 is exceptionally significant, and the interaction of each factor on the response value is analyzed. The response value and the quadratic polynomial regression equation between the various factors are obtained in addition to the flow characteristics of stiff shotcrete under different working conditions. The relationship established by the statistical processing of the experimental results can provide some reference for specifying the pressure loss model of stiff shotcrete.
- 17 June 2022
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 44 (7) , 1-15
DEM simulation of the transport of mine concrete by a screw feeder
- 17 June 2022
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 44 (7) , 1-15
DEM simulation of the transport of mine concrete by a screw feeder
- Open Access
- 30 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (7) , 3530
Simulation of Two-Phase Flow of Shotcrete in a Bent Pipe Based on a CFD–DEM Coupling Model
To solve the problems in determining the interactions among particles and between particles and pipe walls in pneumatic conveying systems in field tests, this article studied the two-phase flow motion characteristics of shotcrete in pipes based on a CFD–DEM coupling model and field measurement. The movement of the shotcrete, which is affected by the gas phase in the pipe, was simulated for different bend angles, and the velocity of the shotcrete material and pressure distribution within the pipeline were determined. The simulation results show that at the ideal wind pressure, the inelastic collisions among the particles and between the particles and pipe wall cause the accumulation of shotcrete material in the outside area of the bent pipe section, which may block the pipe; nevertheless, the blockage is prevented by the turbulent and secondary flows, which disperse the particles to different degrees. In addition, the wear amounts caused by particles in pipes with different bend angles were quantified. With increasing bend angle, the wear points gradually diffuse radially toward the outside wall of the bent pipe. Additionally, the wear loss decreases and then increases with increasing bend angle. The particle velocity exhibits the minimal loss at a bend angle of 90°. It was concluded that the energy loss of the aggregate particles in the elbow of the pipe is approximately 30 times that in a horizontal, straight pipe. The results of this study can provide guidance in the construction field and for numerical simulations of the pneumatic conveying process of shotcrete.
- 30 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (7) , 3530
Open AccessSimulation of Two-Phase Flow of Shotcrete in a Bent Pipe Based on a CFD–DEM Coupling Model
To solve the problems in determining the interactions among particles and between particles and pipe walls in pneumatic conveying systems in field tests, this article studied the two-phase flow motion characteristics of shotcrete in pipes based on a CFD–DEM coupling model and field measurement. The movement of the shotcrete, which is affected by the gas phase in the pipe, was simulated for different bend angles, and the velocity of the shotcrete material and pressure distribution within the pipeline were determined. The simulation results show that at the ideal wind pressure, the inelastic collisions among the particles and between the particles and pipe wall cause the accumulation of shotcrete material in the outside area of the bent pipe section, which may block the pipe; nevertheless, the blockage is prevented by the turbulent and secondary flows, which disperse the particles to different degrees. In addition, the wear amounts caused by particles in pipes with different bend angles were quantified. With increasing bend angle, the wear points gradually diffuse radially toward the outside wall of the bent pipe. Additionally, the wear loss decreases and then increases with increasing bend angle. The particle velocity exhibits the minimal loss at a bend angle of 90°. It was concluded that the energy loss of the aggregate particles in the elbow of the pipe is approximately 30 times that in a horizontal, straight pipe. The results of this study can provide guidance in the construction field and for numerical simulations of the pneumatic conveying process of shotcrete.
- Open Access
- 30 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (7) , 3506
Research on Compressive Strength of Manufactured Sand Concrete Based on Response Surface Methodology (RSM)
Traditional natural river sand is used as a fine aggregate for concrete, but due to the severe environmental situation in recent years, many places have asked for a ban or restriction on the extraction of river sand. This has resulted in an increasing demand for concrete using machine-made sand instead of natural sand. The estimation and prediction of the compressive strength of concrete is very important in civil engineering applications. In this investigation, a Box–Behnken test model was established to analyze the effect of stone powder (SP), pulverized fuel ash (PFA), and silica fume (SF) contents on the compressive strength of manufactured sand concrete using response surface methodology (RSM). A prediction model for the compressive strength of manufactured sand concrete was developed using multiple regression analysis with SP, PFA, and SF content as factors and compressive strength as the response value. In addition, the interaction of stone powder (SP), pulverized fuel ash (PFA), and silica fume (SF) content was analyzed according to the response surface and contour. The investigation showed that for single factors, SP had the greatest effect on the compressive strength of the manufactured sand concrete, with PFA having the second greatest effect, and SF the least; for the interactions, SP and PFA had the most significant effect, and the interaction between SP and SF and PFA and SF had the same effect on the compressive strength.
- 30 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (7) , 3506
Open AccessResearch on Compressive Strength of Manufactured Sand Concrete Based on Response Surface Methodology (RSM)
Traditional natural river sand is used as a fine aggregate for concrete, but due to the severe environmental situation in recent years, many places have asked for a ban or restriction on the extraction of river sand. This has resulted in an increasing demand for concrete using machine-made sand instead of natural sand. The estimation and prediction of the compressive strength of concrete is very important in civil engineering applications. In this investigation, a Box–Behnken test model was established to analyze the effect of stone powder (SP), pulverized fuel ash (PFA), and silica fume (SF) contents on the compressive strength of manufactured sand concrete using response surface methodology (RSM). A prediction model for the compressive strength of manufactured sand concrete was developed using multiple regression analysis with SP, PFA, and SF content as factors and compressive strength as the response value. In addition, the interaction of stone powder (SP), pulverized fuel ash (PFA), and silica fume (SF) content was analyzed according to the response surface and contour. The investigation showed that for single factors, SP had the greatest effect on the compressive strength of the manufactured sand concrete, with PFA having the second greatest effect, and SF the least; for the interactions, SP and PFA had the most significant effect, and the interaction between SP and SF and PFA and SF had the same effect on the compressive strength.
- Open Access
- 17 March 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-14
Calibration of Contact Parameters for Moist Bulk of Shotcrete Based on EDEM
To obtain the contact parameters of the moist bulk of shotcrete accurately and quickly, this study calibrated the contact parameters of the moist bulk of shotcrete by physical stacking test and simulation method. Based on the HertzMindlin with JKR (JohnonKendallRoberts) model, the discrete element simulation is carried out. Using P-BD to screen seven initial parameters, it is found that JKR surface energy, rolling friction coefficient between particles and restitution coefficient of particle impact have significant effects on the angle of repose of the moist bulk of shotcrete. According to B-BD, the second-order regression model of angle of repose and significance parameters was established. Three significant parameters were obtained: JKR surface energy 0.418J/m2, rolling friction coefficient 0.06 and static friction coefficient 1. The angle of repose obtained by simulation is compared with the physical test value, and the relative error is 1.88. The results show that the calibration method proposed in this study can accurately simulate the physical stacking test, and can provide a reference for the calibration of contact parameters of the moist bulk of shotcrete.
- 17 March 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-14
Open AccessCalibration of Contact Parameters for Moist Bulk of Shotcrete Based on EDEM
To obtain the contact parameters of the moist bulk of shotcrete accurately and quickly, this study calibrated the contact parameters of the moist bulk of shotcrete by physical stacking test and simulation method. Based on the HertzMindlin with JKR (JohnonKendallRoberts) model, the discrete element simulation is carried out. Using P-BD to screen seven initial parameters, it is found that JKR surface energy, rolling friction coefficient between particles and restitution coefficient of particle impact have significant effects on the angle of repose of the moist bulk of shotcrete. According to B-BD, the second-order regression model of angle of repose and significance parameters was established. Three significant parameters were obtained: JKR surface energy 0.418J/m2, rolling friction coefficient 0.06 and static friction coefficient 1. The angle of repose obtained by simulation is compared with the physical test value, and the relative error is 1.88. The results show that the calibration method proposed in this study can accurately simulate the physical stacking test, and can provide a reference for the calibration of contact parameters of the moist bulk of shotcrete.