Takuya Hoshii
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Takuya Hoshii has a total of 223 co-authors. Here are the top co-authors by number of shared publications:
Kuniyuki Kakushima
Tokyo Institute of Technology
30 shared publicationsHitoshi Wakabayashi
Institute of Science Tokyo
28 shared publicationsKazuo Tsutsui
Institute of Science Tokyo
26 shared publicationsMitsuru Takenaka
Univ. of Tokyo, Tokyo, Japan
11 shared publicationsShinichi Takagi
Univ. of Tokyo, Tokyo, Japan
11 shared publications- Tetsuji Yasuda
National Institute of Advanced Industrial Science and Technology (AIST) 2 , Tsukuba, Ibaraki 305-8562, Japan
11 shared publications
Latest Publications
- Open Access
- 19 November 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
In-situ H 2 S annealing for stoichiometric residue-free MoS 2 film formation
In-situ H2S annealing for stoichiometric residue-free MoS2 film formation was demonstrated in comparison with conventional sulfur vapor annealing (SVA) using low-vapor-pressure octasulfur. At 600◦C, both annealing methods produced stoichiometric MoS2 films, and the Raman and X-ray diffraction results exhibited higher crystallinity of the H2S-annealed film than that of the SVA-treated film. X- ray photoelectron spectroscopy revealed S-S residue only on the SVA-treated film, accompanied by a Fermi-level shift toward the valence band. A top-gated field-effect transistor (FET) fabricated with the H2S-annealed film exhibited n-type operation.
- 19 November 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
Open AccessIn-situ H 2 S annealing for stoichiometric residue-free MoS 2 film formation
In-situ H2S annealing for stoichiometric residue-free MoS2 film formation was demonstrated in comparison with conventional sulfur vapor annealing (SVA) using low-vapor-pressure octasulfur. At 600◦C, both annealing methods produced stoichiometric MoS2 films, and the Raman and X-ray diffraction results exhibited higher crystallinity of the H2S-annealed film than that of the SVA-treated film. X- ray photoelectron spectroscopy revealed S-S residue only on the SVA-treated film, accompanied by a Fermi-level shift toward the valence band. A top-gated field-effect transistor (FET) fabricated with the H2S-annealed film exhibited n-type operation.
- Open Access
- 17 November 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
3-step-CVD-MoS 2 film formation from PVD-Mo film via oxygen and sulfur-vapor anneals
Molybdenum disulfide (MoS 2 ) is a promising candidate channel material for future logic transistors. In this study, a 3-step CVD method with high industrial scalability is investigated, wherein a molybdenum film deposited by sputtering undergoes oxygen annealing followed by sulfur vapor annealing to synthesize an MoS 2 film via a vapor-phase reaction. The successful formation of the MoS 2 film was confirmed using cross-sectional TEM, Raman spectroscopy, in-plane XRD, and XPS. The MoS 2 film deposited by the 3-step CVD also exhibited higher crystallinity than the directly sulfurized Mo film. Furthermore, back-gate field-effect transistors fabricated with these films demonstrated n-type semiconducting characteristics.
- 17 November 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
Open Access3-step-CVD-MoS 2 film formation from PVD-Mo film via oxygen and sulfur-vapor anneals
Molybdenum disulfide (MoS 2 ) is a promising candidate channel material for future logic transistors. In this study, a 3-step CVD method with high industrial scalability is investigated, wherein a molybdenum film deposited by sputtering undergoes oxygen annealing followed by sulfur vapor annealing to synthesize an MoS 2 film via a vapor-phase reaction. The successful formation of the MoS 2 film was confirmed using cross-sectional TEM, Raman spectroscopy, in-plane XRD, and XPS. The MoS 2 film deposited by the 3-step CVD also exhibited higher crystallinity than the directly sulfurized Mo film. Furthermore, back-gate field-effect transistors fabricated with these films demonstrated n-type semiconducting characteristics.
- 30 June 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (14) , 14SP03
Ferroelectric switching of AlBN films formed by pulse CVD method
AlBN films were formed by alternating deposition of AlN by atomic-layer deposition (ALD) mode and BN by pulse chemical vapor deposition (CVD) mode with several AlN/BN sub-cycle ratios to obtain ferroelectricity. The films were deposited under 400 °C, which is compatible with backend capacitor formation, where c-axis-oriented crystallization was confirmed. Increasing the B-atom ratio in AlBN films decreases the leakage current. Capacitance-voltage (CV) curves showed a ferroelectric butterfly curve for AlBN films with an AlN/BN sub-cycle ratio of 3/1, yielding a dielectric constant of 13. Although obtaining a precise value for the remnant polarization was challenging, presumably due to domain-wall-related leakage current, a ferroelectric switching component was observed in the PUND measurements.
- 30 June 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (14) , 14SP03
Ferroelectric switching of AlBN films formed by pulse CVD method
AlBN films were formed by alternating deposition of AlN by atomic-layer deposition (ALD) mode and BN by pulse chemical vapor deposition (CVD) mode with several AlN/BN sub-cycle ratios to obtain ferroelectricity. The films were deposited under 400 °C, which is compatible with backend capacitor formation, where c-axis-oriented crystallization was confirmed. Increasing the B-atom ratio in AlBN films decreases the leakage current. Capacitance-voltage (CV) curves showed a ferroelectric butterfly curve for AlBN films with an AlN/BN sub-cycle ratio of 3/1, yielding a dielectric constant of 13. Although obtaining a precise value for the remnant polarization was challenging, presumably due to domain-wall-related leakage current, a ferroelectric switching component was observed in the PUND measurements.
- 22 June 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (24)
Polarity control of sputter-deposited wurtzite AlScN thin films by AlSc seed layer
The effect of a thin-AlSc seed layer on the polarity of the ferroelectric Al0.87Sc0.13N films was investigated. The polarity of AlScN films was evaluated through measuring capacitance responses of metal–ferroelectric–metal capacitors. A capacitance peak appeared in the first negative-voltage sweep, confirming N-polarity AlScN films formed on a Ta electrode. On the other hand, a capacitance peak was observed during the first positive voltage sweep with the insertion of the AlSc seed layer, suggesting that the films were in a metal-polar state. Piezoelectric force microscopy also confirmed the polarity change. The conditions of substrates for metal-polar AlScN are summarized. The AlSc seed layer with a hexagonal face turned out to be important for metal-polar AlScN. The present results give an insight into controlling the polarity of nitride-based dielectrics and semiconductors.
- 22 June 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (24)
Polarity control of sputter-deposited wurtzite AlScN thin films by AlSc seed layer
The effect of a thin-AlSc seed layer on the polarity of the ferroelectric Al0.87Sc0.13N films was investigated. The polarity of AlScN films was evaluated through measuring capacitance responses of metal–ferroelectric–metal capacitors. A capacitance peak appeared in the first negative-voltage sweep, confirming N-polarity AlScN films formed on a Ta electrode. On the other hand, a capacitance peak was observed during the first positive voltage sweep with the insertion of the AlSc seed layer, suggesting that the films were in a metal-polar state. Piezoelectric force microscopy also confirmed the polarity change. The conditions of substrates for metal-polar AlScN are summarized. The AlSc seed layer with a hexagonal face turned out to be important for metal-polar AlScN. The present results give an insight into controlling the polarity of nitride-based dielectrics and semiconductors.
- 19 June 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (12) , 12SP03
On the enhancement of capacitive memory window for ferroelectric AlScN films using metal-capping oxidation (MCO) process
The capacitive readout scheme with crossbar arrays and ferroelectric (FE) materials has enlightened the way of non-destructive operations to realize advanced memory technologies with better power efficiency and endurance. However, reports on wurtzite-based FE materials targeting this scheme are still lacking. In this study, we introduce a metal-capping oxidation (MCO) process to indirectly oxidize the AlScN FE thin film through an ultra-thin metal-capping layer. W and Ti were selected due to their suitable oxygen chemical potential and multivalent nature to transport O atoms to the FE layer. Improved breakdown strength, mitigated leakage, as well as remanent polarization restoration were demonstrated by MCO-treated AlScN FE thin films. The imprint effect was greatly promoted and remarkably led to over three-fold increment of capacitive memory window (MW). Besides, the FE films exhibited minimal variation in dielectric permittivity and capacitive MW after 100 cycles of endurance switching, further showcasing the feasibility of this approach.
- 19 June 2026
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 65 (12) , 12SP03
On the enhancement of capacitive memory window for ferroelectric AlScN films using metal-capping oxidation (MCO) process
The capacitive readout scheme with crossbar arrays and ferroelectric (FE) materials has enlightened the way of non-destructive operations to realize advanced memory technologies with better power efficiency and endurance. However, reports on wurtzite-based FE materials targeting this scheme are still lacking. In this study, we introduce a metal-capping oxidation (MCO) process to indirectly oxidize the AlScN FE thin film through an ultra-thin metal-capping layer. W and Ti were selected due to their suitable oxygen chemical potential and multivalent nature to transport O atoms to the FE layer. Improved breakdown strength, mitigated leakage, as well as remanent polarization restoration were demonstrated by MCO-treated AlScN FE thin films. The imprint effect was greatly promoted and remarkably led to over three-fold increment of capacitive memory window (MW). Besides, the FE films exhibited minimal variation in dielectric permittivity and capacitive MW after 100 cycles of endurance switching, further showcasing the feasibility of this approach.
- 2 March 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (9)
Interpretation of ferroelectric behavior in AlScN films with TiN and Ta bottom electrodes
Ferroelectric properties of 50-nm-thick Al0.88Sc0.12N films with different bottom electrodes (BEs) of TiN and Ta were characterized. Capacitance–voltage (C–V) curves of the capacitors indicate sharp switching with the Ta BE, whereas partial polarization can be obtained with the TiN BE. By analyzing the electric field distribution of the partial polarization obtained from positive-up negative-down measurements, two kinds of coercive field (Ec) with Lorentzian distributions can be extracted: one high Ec with AlScN domains and another low Ec with defect-incorporated domains. The distribution of the inverted nucleus becomes narrower with the Ta BE and appears to correlate with the degree of c-axis orientation evaluated by rocking-curve x-ray diffraction. The defect-incorporated domains were found to shift their mean Ec to a higher electric field by switching cycles, resulting in the fatigue effect. The present interpretation provides insight into understanding the ferroelectric behavior of AlScN films.
- 2 March 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (9)
Interpretation of ferroelectric behavior in AlScN films with TiN and Ta bottom electrodes
Ferroelectric properties of 50-nm-thick Al0.88Sc0.12N films with different bottom electrodes (BEs) of TiN and Ta were characterized. Capacitance–voltage (C–V) curves of the capacitors indicate sharp switching with the Ta BE, whereas partial polarization can be obtained with the TiN BE. By analyzing the electric field distribution of the partial polarization obtained from positive-up negative-down measurements, two kinds of coercive field (Ec) with Lorentzian distributions can be extracted: one high Ec with AlScN domains and another low Ec with defect-incorporated domains. The distribution of the inverted nucleus becomes narrower with the Ta BE and appears to correlate with the degree of c-axis orientation evaluated by rocking-curve x-ray diffraction. The defect-incorporated domains were found to shift their mean Ec to a higher electric field by switching cycles, resulting in the fatigue effect. The present interpretation provides insight into understanding the ferroelectric behavior of AlScN films.
- 1 March 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (3) , 030901
Interface properties of SiC MOS devices with NH3 plasma nitridation of ultrathin SiO2 interfacial layer
The effect of NH3 remote-plasma treatment on 4H-SiC surfaces on the interface properties is investigated. By comparing with the N2 plasma treatment, the NH3 plasma treatment showed a reduction in interface state density (Dit) down to 3.0 × 1011 cm−2eV−1, with better bias stress stability. The improvement was further enhanced to 1.4 × 1011 cm−2eV−1 when the plasma treatment was conducted to the 4H-SiC surface with a 0.4-nm-thick SiO2 interfacial layer, presumably suppressing the plasma damage to the SiC surface. Mobility improvement from 22.8 to 27.1 cm2V−1s−1 was achieved without negatively shifting the threshold voltage while keeping a high breakdown field of over 10 MV cm−1.
- 1 March 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (3) , 030901
Interface properties of SiC MOS devices with NH3 plasma nitridation of ultrathin SiO2 interfacial layer
The effect of NH3 remote-plasma treatment on 4H-SiC surfaces on the interface properties is investigated. By comparing with the N2 plasma treatment, the NH3 plasma treatment showed a reduction in interface state density (Dit) down to 3.0 × 1011 cm−2eV−1, with better bias stress stability. The improvement was further enhanced to 1.4 × 1011 cm−2eV−1 when the plasma treatment was conducted to the 4H-SiC surface with a 0.4-nm-thick SiO2 interfacial layer, presumably suppressing the plasma damage to the SiC surface. Mobility improvement from 22.8 to 27.1 cm2V−1s−1 was achieved without negatively shifting the threshold voltage while keeping a high breakdown field of over 10 MV cm−1.
- 1 February 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (2) , 020803
Fabrication of n-type and p-type WSe2 field-effect transistors and their low-voltage CMOS inverter operation
This paper describes the concepts for achieving n-type and p-type WSe2 field-effect transistors (FETs) and their complementary metal-oxide-semiconductor (CMOS) inverter operation. First, n-type and p-type WSe2 FETs were demonstrated using molecular chemistry approaches that offer the manipulation of WSe2 properties through low-temperature, low-energy processes. Next, the advancement in device technology was explained to achieve symmetric characteristics in n-type and p-type WSe2 FETs. WSe2 single-channel CMOS offers a promising pathway for simplifying device integration to suppress variability and fluctuations in FET characteristics, although many challenges remain to be addressed. Further fundamental research holds the potential to advance the development of WSe2 single-channel CMOS devices.
- 1 February 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (2) , 020803
Fabrication of n-type and p-type WSe2 field-effect transistors and their low-voltage CMOS inverter operation
This paper describes the concepts for achieving n-type and p-type WSe2 field-effect transistors (FETs) and their complementary metal-oxide-semiconductor (CMOS) inverter operation. First, n-type and p-type WSe2 FETs were demonstrated using molecular chemistry approaches that offer the manipulation of WSe2 properties through low-temperature, low-energy processes. Next, the advancement in device technology was explained to achieve symmetric characteristics in n-type and p-type WSe2 FETs. WSe2 single-channel CMOS offers a promising pathway for simplifying device integration to suppress variability and fluctuations in FET characteristics, although many challenges remain to be addressed. Further fundamental research holds the potential to advance the development of WSe2 single-channel CMOS devices.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (20) , 1814
(Invited) Influence of Target-Sample Distance on Residual Stress for Sputter-Deposited Ferroelectric AlScN
Ferroelectric Al1-x Sc x N films have been extensively studied as a material for next-generation non-volatile ferroelectric memories. A high remnant polarization (P r) of over 100 µC/cm2 is attractive even under 10 nm thin films [1,2]. As the role of Sc atoms in the AlN crystal to apply tensile stress, the elongation in the lattice constant eases the displacement of N atoms by an electric field. Besides, one of the issues of ferroelectric AlScN films is the increase in E C while thinning the thickness. The source of the change is explained by the stress applied from the bottom electrode. We have made a Raman spectroscopy study to measure the stress in AlScN films with different thicknesses, and find that higher compressive stress is presented for thinner film, especially for higher Sc composition films [3]. However, the physical source of the stress is yet to be known. In this presentation, a Raman spectroscopy measurement was conducted on AlScN films with different target-sample (T/S) distance, which can strongly affect the stress in the film, as reported in TiN case [4]. Al0.7Sc0.3N films were deposited on (0001) sapphier substrates by reactive sputtering process. Film thickness were varied from 5 to 50 nm to confirm the thickness dependence stress in the films. The T/S distance was set to 100, 130, and 150 mm. Differetial Raman spectra obtained by subtracting the signal of sappire substrate is shown in fig. 1. We can confirm two broad and weak peaks indicated with doted line around 580 (E2 H) and 850 /cm (A1LO). The two Raman peaks show a slight blue shift with longer T/S distance. The obtained Raman shifts on thickness are summarized in fig. 2. A blue shift is observed for both peaks while thinning the thickness. With longer T/S distance, the shift in E2 H was fully relaxed even with a thickness of 5 nm. On the other hand, only a limited relaxation was obtained with A1LO. In conclusion, we have confirmed that longer T/S distance can relax the thickness-dependent compressive stress in AlScN films. The stress relaxation can contribute to stabilize the coercive field for thin ferroelectric AlScN films. Acknowledgement This study was supported by MEXT Initiative to Establish Next-generation Novel Integrated Circuits Centers (X-NICS) JPJ011438 Reference [1] S. Fichtner, N. Wolff, F. Lofink, L. Kienle, and B. Wagner, “AlScN: A III-V semiconductor based ferroelectric,” J. Appl. Phys. 125, 114103 (2019). [2] G. Schönweger, N. Wolff, M. R. Islam, M. Gremmel, A. Petraru, Kienle, H. Kohlstedt, S. Fichtner” In-Grain Ferroelectric Switching in Sub-5 nm Thin Al0.74Sc0.26N Films at 1 V” Adv. Sci. 10, 2302296 (2023) [3] Y. Tokita, T. Hoshii, H. Wakabayashi, K. Tsutsui, K. Kuniyuki “Identification of cpmpressive strain in thin ferroelectric Al1-xScxN filns by Raman spectrascopy” Jpn. J. Appl. Phys. 63 04SP31 (2024) [4] A. Neidhardt, U. Reinhold, E. schroeter, W. Wuttke ” Position dependence in planar magnetron sputtering of TiN films” Thin Solid Films, 173109 127 (1989) Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (20) , 1814
(Invited) Influence of Target-Sample Distance on Residual Stress for Sputter-Deposited Ferroelectric AlScN
Ferroelectric Al1-x Sc x N films have been extensively studied as a material for next-generation non-volatile ferroelectric memories. A high remnant polarization (P r) of over 100 µC/cm2 is attractive even under 10 nm thin films [1,2]. As the role of Sc atoms in the AlN crystal to apply tensile stress, the elongation in the lattice constant eases the displacement of N atoms by an electric field. Besides, one of the issues of ferroelectric AlScN films is the increase in E C while thinning the thickness. The source of the change is explained by the stress applied from the bottom electrode. We have made a Raman spectroscopy study to measure the stress in AlScN films with different thicknesses, and find that higher compressive stress is presented for thinner film, especially for higher Sc composition films [3]. However, the physical source of the stress is yet to be known. In this presentation, a Raman spectroscopy measurement was conducted on AlScN films with different target-sample (T/S) distance, which can strongly affect the stress in the film, as reported in TiN case [4]. Al0.7Sc0.3N films were deposited on (0001) sapphier substrates by reactive sputtering process. Film thickness were varied from 5 to 50 nm to confirm the thickness dependence stress in the films. The T/S distance was set to 100, 130, and 150 mm. Differetial Raman spectra obtained by subtracting the signal of sappire substrate is shown in fig. 1. We can confirm two broad and weak peaks indicated with doted line around 580 (E2 H) and 850 /cm (A1LO). The two Raman peaks show a slight blue shift with longer T/S distance. The obtained Raman shifts on thickness are summarized in fig. 2. A blue shift is observed for both peaks while thinning the thickness. With longer T/S distance, the shift in E2 H was fully relaxed even with a thickness of 5 nm. On the other hand, only a limited relaxation was obtained with A1LO. In conclusion, we have confirmed that longer T/S distance can relax the thickness-dependent compressive stress in AlScN films. The stress relaxation can contribute to stabilize the coercive field for thin ferroelectric AlScN films. Acknowledgement This study was supported by MEXT Initiative to Establish Next-generation Novel Integrated Circuits Centers (X-NICS) JPJ011438 Reference [1] S. Fichtner, N. Wolff, F. Lofink, L. Kienle, and B. Wagner, “AlScN: A III-V semiconductor based ferroelectric,” J. Appl. Phys. 125, 114103 (2019). [2] G. Schönweger, N. Wolff, M. R. Islam, M. Gremmel, A. Petraru, Kienle, H. Kohlstedt, S. Fichtner” In-Grain Ferroelectric Switching in Sub-5 nm Thin Al0.74Sc0.26N Films at 1 V” Adv. Sci. 10, 2302296 (2023) [3] Y. Tokita, T. Hoshii, H. Wakabayashi, K. Tsutsui, K. Kuniyuki “Identification of cpmpressive strain in thin ferroelectric Al1-xScxN filns by Raman spectrascopy” Jpn. J. Appl. Phys. 63 04SP31 (2024) [4] A. Neidhardt, U. Reinhold, E. schroeter, W. Wuttke ” Position dependence in planar magnetron sputtering of TiN films” Thin Solid Films, 173109 127 (1989) Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (20) , 1819
Threshold Voltage Shift of P-Ch GaN Misfets with Charge Trapping Insulator
The realization of high-performance p-channel devices and threshold voltage control are desired to achieve GaN CMOS circuits. Recess-gate devices on polarized junction substrates have been reported as candidates for p-channel devices that can be integrated with n-channel devices, including HEMTs [1]. In addition, we have reported that the use of a quasi-atomic layer etching process with nitrogen plasma to fabricate the recessed gate structure improves the MIS interface characteristics and increases the drive current [2]. However, regarding threshold voltage control, the recessed gate structure may not be sufficient. Although control by the back gate is a candidate, other control methods are worth considering for circuit simplicity. In this study, we investigated the threshold control by introducing a charge trapping layer into the gate insulator. Figure 1 shows the schematic structure of p-channel GaN MISFETs with a charge-trapping layer fabricated on a polarization junction substrate. The insulator, Al2O3/HfO2/Al2O3 layer, was formed by atomic layer deposition. A negative threshold voltage shift could be expected when positive charges are trapped in the HfO2 layer or at the HfO2/Al2O3 interfaces. Figure 2 shows the I d-V g characteristics of a p-channel MISFET. V d was set to -3 V, and two consecutive double-sweep measurements were performed. Figure 2(a) shows the results of measurements with a V g range of +5 to -6 V. It shows a large hysteresis, with a negative sweep changing to the on state at a positive voltage and a positive sweep to the off state at a negative voltage. The second sweep also reproduces the first sweep's characteristics. This result can be attributed to the fact that the negative gate voltage introduces positive charges into the charge-trapping layer, resulting in a negative threshold voltage, and that the positive gate voltage completely removes the positive charge from the charge-capture layer, resulting in a positive threshold voltage again. On the other hand, Fig. 2(b) shows that, using the V g range of +2 to -6 V, the threshold voltage of the negative sweep in the second sweep shifts to negative. This result indicates that only partial charge was released from the charge trapping layer, and the remaining charge caused the shift. Also, Fig. 2(c) shows the results of the V g range of 0 to -6 V. The hysteresis at the second sweep is significantly reduced, indicating normally-off operation. This is considered to be a result of the positive charge captured in the charge-trapping layer being retained in the negative gate voltage range. Furthermore, Figs. 2(d), (e), and (f) present the vertical axes of Figs. 2(a), (b), and (c)c in logarithmic form, respectively, and in addition, I g is also shown. The gate leakage current is kept low compared to the drain current, and an on-off ratio of more than five orders of magnitude is obtained. Additionally, there is no significant change in the subthreshold slope due to threshold voltage variation, indicating that the charging and discharging of the charge trapping layer does not significantly affect the carrier transport properties in channel region. In this study, the threshold voltage shift and resulting normally-off operation of p-channel GaN MOSFETs is demonstrated by using a charge trapping layer. The same effect is promising for threshold voltage control of n-channel devices, and this technique is expected to be used for power-saving GaN CMOS circuits with two-dimensional carrier gases. Acknowledgments This work was supported by JSPS KAKENHI Grant Number 21K04172. References [1] A. Nakajima, et al., IET Power Electron. 11, 689 (2018). [2] S. Kimura, et al., in The International Workshop on Nitride Semiconductors 2022,p. 126. Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (20) , 1819
Threshold Voltage Shift of P-Ch GaN Misfets with Charge Trapping Insulator
The realization of high-performance p-channel devices and threshold voltage control are desired to achieve GaN CMOS circuits. Recess-gate devices on polarized junction substrates have been reported as candidates for p-channel devices that can be integrated with n-channel devices, including HEMTs [1]. In addition, we have reported that the use of a quasi-atomic layer etching process with nitrogen plasma to fabricate the recessed gate structure improves the MIS interface characteristics and increases the drive current [2]. However, regarding threshold voltage control, the recessed gate structure may not be sufficient. Although control by the back gate is a candidate, other control methods are worth considering for circuit simplicity. In this study, we investigated the threshold control by introducing a charge trapping layer into the gate insulator. Figure 1 shows the schematic structure of p-channel GaN MISFETs with a charge-trapping layer fabricated on a polarization junction substrate. The insulator, Al2O3/HfO2/Al2O3 layer, was formed by atomic layer deposition. A negative threshold voltage shift could be expected when positive charges are trapped in the HfO2 layer or at the HfO2/Al2O3 interfaces. Figure 2 shows the I d-V g characteristics of a p-channel MISFET. V d was set to -3 V, and two consecutive double-sweep measurements were performed. Figure 2(a) shows the results of measurements with a V g range of +5 to -6 V. It shows a large hysteresis, with a negative sweep changing to the on state at a positive voltage and a positive sweep to the off state at a negative voltage. The second sweep also reproduces the first sweep's characteristics. This result can be attributed to the fact that the negative gate voltage introduces positive charges into the charge-trapping layer, resulting in a negative threshold voltage, and that the positive gate voltage completely removes the positive charge from the charge-capture layer, resulting in a positive threshold voltage again. On the other hand, Fig. 2(b) shows that, using the V g range of +2 to -6 V, the threshold voltage of the negative sweep in the second sweep shifts to negative. This result indicates that only partial charge was released from the charge trapping layer, and the remaining charge caused the shift. Also, Fig. 2(c) shows the results of the V g range of 0 to -6 V. The hysteresis at the second sweep is significantly reduced, indicating normally-off operation. This is considered to be a result of the positive charge captured in the charge-trapping layer being retained in the negative gate voltage range. Furthermore, Figs. 2(d), (e), and (f) present the vertical axes of Figs. 2(a), (b), and (c)c in logarithmic form, respectively, and in addition, I g is also shown. The gate leakage current is kept low compared to the drain current, and an on-off ratio of more than five orders of magnitude is obtained. Additionally, there is no significant change in the subthreshold slope due to threshold voltage variation, indicating that the charging and discharging of the charge trapping layer does not significantly affect the carrier transport properties in channel region. In this study, the threshold voltage shift and resulting normally-off operation of p-channel GaN MOSFETs is demonstrated by using a charge trapping layer. The same effect is promising for threshold voltage control of n-channel devices, and this technique is expected to be used for power-saving GaN CMOS circuits with two-dimensional carrier gases. Acknowledgments This work was supported by JSPS KAKENHI Grant Number 21K04172. References [1] A. Nakajima, et al., IET Power Electron. 11, 689 (2018). [2] S. Kimura, et al., in The International Workshop on Nitride Semiconductors 2022,p. 126. Figure 1