MKMichael Krayer

Michael Krayer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Michael Krayer has a total of 71 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Annulated bacteriochlorins for near-infrared photophysical studies

    by Hikaru Fujita, Haoyu Jing, Michael Krayer, Srinivasarao Allu, Gorre Veeraraghavaiah, Zhiyuan Wu, Jianbing Jiang, James R. Diers, Nikki Cecil M. Magdaong, Amit K. Mandal, et al.

    Molecules with strong absorption in the near-infrared (NIR) spectral region are of interest for a variety of applications in the photosciences. Nature's NIR absorbers are bacteriochlorophylls, which contain a tetrahydroporphyrin chromophore accentuated by attached auxochromes, including a β,meso-bridging isocyclic ring. Modification of the isocyclic ring has provided a convenient means of wavelength tuning. In other tetrapyrroles, annulation at the β,meso-, β,β-, and β-meso-β-positions also has enabled wavelength tuning. Here, synthetic bacteriochlorins bearing a gem-dimethyl group in each pyrroline ring have provided the foundation for studies of annulation. Seven new free base bacteriochlorins have been prepared and seven others have been elaborated therefrom. Six distinct routes known among porphyrins were explored. Ultimately, annulation of phenaleno or benzo groups at the β,meso-sites (i.e., spanning the 3,5- and 13,15-positions) of bacteriochlorins was achieved by a new route that entails two successive Pd-mediated coupling reactions of a dibromobacteriochlorin with a bromoarylboronic acid. The corresponding Phen-BC or Benz-BC absorbs at 913 or 1033 nm, respectively. Examination by time-resolved spectroscopy revealed an excited-state lifetime of 150 ps or 7 ps, with commensurably low fluorescence quantum yield (Φf) values estimated to be ∼0.004 or 3 × 10−5, respectively. The origin of the short excited-state lifetimes due to β,meso-annulation is unknown, but is not simply a consequence of the energy-gap law for non-radiative decay.


  • Integration of Cyanine, Merocyanine and Styryl Dye Motifs with Synthetic Bacteriochlorins

    by Eunkyung Yang, Nuonuo Zhang, Michael Krayer, Masahiko Taniguchi, James R. Diers, Christine Kirmaier, Jonathan S. Lindsey, David F. Bocian, Dewey Holten

    Understanding the effects of substituents on spectral properties is essential for the rational design of tailored bacteriochlorins for light‐harvesting and other applications. Toward this goal, three new bacteriochlorins containing previously unexplored conjugating substituents have been prepared and characterized. The conjugating substituents include two positively charged species, 2‐(N‐ethyl 2‐quinolinium)vinyl‐ (B‐1) and 2‐(N‐ethyl 4‐pyridinium)vinyl‐ (B‐2), and a neutral group, acroleinyl‐ (B‐3); the charged species resemble cyanine (or styryl) dye motifs whereas the neutral unit resembles a merocyanine dye motif. The three bacteriochlorins are examined by static and time‐resolved absorption and emission spectroscopy and density functional theoretical calculations. B‐1 and B‐2 have Qy absorption bathochromically shifted well into the NIR region (822 and 852 nm), farther than B‐3 (793 nm) and other 3,13‐disubstituted bacteriochlorins studied previously. B‐1 and B‐2 have broad Qy absorption and fluorescence features with large peak separation (Stokes shift), low fluorescence yields, and shortened S1 (Qy) excited‐state lifetimes (~700 ps and ~100 ps). More typical spectra and S1 lifetime (~2.3 ns) are found for B‐3. The combined photophysical and molecular‐orbital characteristics suggest the altered spectra and enhanced nonradiative S1 decay of B‐1 and B‐2 derive from excited‐state configurations in which electron density is shifted between the macrocycle and the substituents.


  • Extending the Short and Long Wavelength Limits of Bacteriochlorin Near-Infrared Absorption via Dioxo- and Bisimide-Functionalization

    by Pothiappan Vairaprakash, Eunkyung Yang, Tuba Sahin, Masahiko Taniguchi, Michael Krayer, James R. Diers, Alfred Wang, Dariusz M. Niedzwiedzki, Christine Kirmaier, Jonathan S. Lindsey, et al.

    Six new bacteriochlorins expanding the range of the strong near-infrared (NIR) absorption (Qy band) to both shorter and longer wavelengths (∼690 to ∼900 nm) have been synthesized and characterized. The architectures include bacteriochlorin–bisimides that have six-membered imide rings spanning the 3,5- and 13,15-macrocycle positions or five-membered imide rings spanning the β-pyrrolic 2,3- and 12,13-positions. Both bisimide types absorb at significantly longer wavelength than the bacteriochlorin precursors (no fused rings), whereas oxo-groups at the 7- or 7,17-positions shift the Qy band to a new short wavelength limit. Surprisingly, bacteriochlorin–bisimides with five-membered β-pyrrolic-centered imide rings have a Qy band closer to that of six-membered bacteriochlorin–monoimides. However, the five-membered bisimides (versus the six-membered bacteriochlorin–monoimides) have significantly enhanced absorption intensity that is paralleled by an ∼2-fold higher fluorescence yield (∼0.16 vs ∼0.07) and longer singlet excited-state lifetime (∼4 ns vs ∼2 ns). The photophysical enhancements derive in part from mixing of the lowest unoccupied frontier molecular orbitals of the five-membered imide ring with those of the bacteriochlorin framework. In general, all of the new bacteriochlorins have excited-state lifetimes (1–4 ns) that are sufficiently long for use in molecular-based systems for photochemical applications.


  • Photophysical Properties and Electronic Structure of Chlorin-Imides: Bridging the Gap between Chlorins and Bacteriochlorins

    by Kaitlyn M. Faries, James R. Diers, Joseph W. Springer, Eunkyung Yang, Marcin Ptaszek, Dorothée Lahaye, Michael Krayer, Masahiko Taniguchi, Christine Kirmaier, Jonathan S. Lindsey, et al.

    Efficient light harvesting for molecular-based solar-conversion systems requires absorbers that span the photon-rich red and near-infrared (NIR) regions of the solar spectrum. Reported herein are the photophysical properties of a set of six chlorin-imides and nine synthetic chlorin analogues that extend the absorption deeper (624–714 nm) into these key spectral regions. These absorbers help bridge the gap between typical chlorins and bacteriochlorins. The new compounds have high fluorescence quantum yields (0.15–0.34) and long singlet excited-state lifetimes (4.2–10.9 ns). The bathochromic shift in Qy absorption is driven by substituent-based stabilization of the lowest unoccupied molecular orbital, with the largest shifts for chlorins that bear an electron-withdrawing, conjugative group at the 3-position in combination with a 13,15-imide ring.


  • Photophysical properties and electronic structure of retinylidene—chlorin—chalcones and analogues

    by Joseph W. Springer, Masahiko Taniguchi, Michael Krayer, Christian Ruzié, James R. Diers, Dariusz M. Niedzwiedzki, David F. Bocian, Jonathan S. Lindsey, Dewey Holten

    Synthetic chlorins can accommodate diverse substituents about the macrocycle perimeter. Simple auxochromes (e.g., vinyl, acetyl, phenyl) allow systematic tuning of spectral and photophysical features. More extensive spectral tailoring may be achieved by using more potent, highly conjugated substituents that themselves bring new absorption into a target spectral region, if deleterious excited-state quenching processes can be avoided. To explore such an expanded substituent space, herein the spectral and photophysical properties of four chlorin–chalcones are reported. The molecules are free base and zinc chlorins with substituents at the 13-position that include a chalcone and an extended chalcone derived by reaction of the 13-acetylchlorin with benzaldehyde and all-trans-retinal, respectively. Measurements of the spectral and photophysical properties (Φf, τs, kf, kic, kisc) are accompanied by density functional calculations that examine the characteristics of the frontier molecular orbitals. The chlorin–chalcones in nonpolar (toluene) and polar (dimethylsulfoxide) media exhibit bathochromically shifted (and intense) Qy absorption bands. The presence of the retinylidene group adds new absorption in the blue-green region where the chlorins are typically transparent; excitation in this region leads to quantitative formation of the chlorin Qy excited state. The spectral properties generally correlate with substituent effects on the frontier MOs. The four chlorin–chalcones in the solvent toluene have high fluorescence yields (0.24–0.30) and multi-nanosecond singlet excited-state lifetimes (3.7–8.4 ns), in addition to the added absorption imparted by the chalcone moiety. Collectively, the studies reported herein provide insight into the fundamental properties of chlorins and illustrate the utility of chalcones as a means of both tuning and augmenting the spectral properties of these chromophores.


  • Palette of lipophilic bioconjugatable bacteriochlorins for construction of biohybrid light-harvesting architectures

    by Kanumuri Ramesh Reddy, Jianbing Jiang, Michael Krayer, Michelle A. Harris, Joseph W. Springer, Eunkyung Yang, Jieying Jiao, Dariusz M. Niedzwiedzki, Dinesh Pandithavidana, Pamela S. Parkes-Loach, et al.

    The challenge of creating both pigment building blocks and scaffolding to organize a large number of such pigments has long constituted a central impediment to the construction of artificial light-harvesting architectures. Light-harvesting (LH) antennas in photosynthetic bacteria are formed in a two-tiered self-assembly process wherein (1) a peptide dyad containing two bacteriochlorophyll a molecules forms, and (2) the dyads associate to form cyclic oligomers composed of 8 or 9 dyads in LH2 and 15 or 16 in LH1 of purple photosynthetic bacteria. While such antenna systems generally have near-quantitative transfer of excitation energy among pigments, only a fraction of the solar spectrum is typically absorbed. A platform architecture for study of light-harvesting phenomena has been developed that employs native photosynthetic peptide analogs, native bacteriochlorophyll a, and synthetic near-infrared-absorbing bacteriochlorins. Herein, the syntheses of 10 lipophilic bacteriochlorins are reported, of which 7 contain bioconjugatable handles (maleimide, iodoacetamide, formyl, carboxylic acid) for attachment to the peptide chassis. The bioconjugatable bacteriochlorins typically exhibit a long-wavelength absorption band in the range 710 to 820 nm, fluorescence yield of 0.1–0.2, and lifetime of the lowest singlet excited state of 2–5 ns. The α-helical structure of the native-like peptide is retained upon conjugation with a synthetic bacteriochlorin, as judged by single-reflection infrared studies. Static and time-resolved optical studies of the oligomeric biohybrid architectures in aqueous detergent solution reveal efficient (∼90%) excitation energy transfer from the attached bacteriochlorin to the native-like bacteriochlorophyll a sites. The biohybrid light-harvesting architectures thus exploit the self-constituting features of the natural systems yet enable versatile incorporation of members from a palette of synthetic chromophores, thereby opening the door to a wide variety of studies in artificial photosynthesis.


  • Photophysical Properties and Electronic Structure of Bacteriochlorin-Chalcones with Extended Near-Infrared Absorption

    by Eunkyung Yang, Christian Ruzié, Michael Krayer, James R. Diers, Dariusz M. Niedzwiedzki, Christine Kirmaier, Jonathan S. Lindsey, David F. Bocian, Dewey Holten

    Synthetic bacteriochlorins enable systematic tailoring of substituents about the bacteriochlorin chromophore and thereby provide insights concerning the native bacteriochlorophylls of bacterial photosynthesis. Nine free-base bacteriochlorins (eight prepared previously and one prepared here) have been examined that bear diverse substituents at the 13- or 3,13-positions. The substituents include chalcone (3-phenylprop-2-en-1-onyl) derivatives with groups attached to the phenyl moiety, a “reverse chalcone” (3-phenyl-3-oxo-1-enyl), and extended chalcones (5-phenylpenta-2,4-dien-1-onyl, retinylidenonyl). The spectral and photophysical properties (τs, Φf, Φic, Φisc, τT, kf, kic, kisc) of the bacteriochlorins have been characterized. The bacteriochlorins absorb strongly in the 780–800 nm region and have fluorescence quantum yields (Φf) in the range 0.05–0.11 in toluene and dimethylsulfoxide. Light-induced electron promotions between orbitals with predominantly substituent or macrocycle character or both may give rise to some net macrocycle ↔ substituent charge-transfer character in the lowest and higher singlet excited states as indicated by density functional theory (DFT) and time-dependent DFT calculations. Such calculations indicated significant participation of molecular orbitals beyond those (HOMO − 1 to LUMO + 1) in the Gouterman four-orbital model. Taken together, the studies provide insight into the fundamental properties of bacteriochlorins and illustrate designs for tuning the spectral and photophysical features of these near-infrared-absorbing tetrapyrrole chromophores.


  • Synthesis and evaluation of cationic bacteriochlorin amphiphiles with effective in vitro photodynamic activity against cancer cells at low nanomolar concentration

    by Sulbha K. Sharma, Michael Krayer, Felipe F. Sperandio, Liyi Huang, Ying-Ying Huang, Dewey Holten, Jonathan S. Lindsey, Michael R. Hamblin

    Bacteriochlorins are attractive candidates as photosensitizers for photodynamic therapy (PDT) due to their intense absorption in the near-infrared (NIR) region of the spectrum where light transmission through tissue is maximal. Many naturally occurring bacteriochlorins are inherently unstable due to adventitious atmospheric oxidation. A de novo synthesis affords bacteriochlorins that contain a geminal dimethyl group in each reduced pyrrole ring to increase stability against oxidation. Here, three new synthetic bacteriochlorins, each bearing a single side-chain containing one or two positive charges, were investigated for their in vitro PDT activity against HeLa human cancer cells. All bacteriochlorins were active at low nanomolar concentration when activated with NIR light; those bearing a single positive charge exhibited faster uptake and higher activity. The bacteriochlorins were localized in mitochondria, lysosomes and endoplasmic reticulum as shown by organelle specific fluorescent probes. Cell death was via apoptosis as shown by cell morphology and nuclear condensation. Taken together, the results show the importance of appropriate peripheral groups about a photosensitizer for effective PDT applications.


  • Biohybrid Photosynthetic Antenna Complexes for Enhanced Light-Harvesting

    by Joseph W. Springer, Pamela S. Parkes-Loach, Kanumuri Ramesh Reddy, Michael Krayer, Jieying Jiao, Gregory M. Lee, Dariusz M. Niedzwiedzki, Michelle A. Harris, Christine Kirmaier, David F. Bocian, et al.

    Biohybrid antenna systems have been constructed that contain synthetic chromophores attached to 31mer analogues of the bacterial photosynthetic core light-harvesting (LH1) β-polypeptide. The peptides are engineered with a Cys site for bioconjugation with maleimide-terminated chromophores, which include synthetic bacteriochlorins (BC1, BC2) with strong near-infrared absorption and commercial dyes Oregon green (OGR) and rhodamine red (RR) with strong absorption in the blue-green to yellow-orange regions. The peptides place the Cys 14 (or 6) residues before a native His site that binds bacteriochlorophyll a (BChl-a) and, like the native LH proteins, have high helical content as probed by single-reflection IR spectroscopy. The His residue associates with BChl-a as in the native LH1 β-polypeptide to form dimeric ββ-subunit complexes [31mer(−14Cys)X/BChl]2, where X is one of the synthetic chromophores. The native-like BChl-a dimer has Qy absorption at 820 nm and serves as the acceptor for energy from light absorbed by the appended synthetic chromophore. The energy-transfer characteristics of biohybrid complexes have been characterized by steady-state and time-resolved fluorescence and absorption measurements. The quantum yields of energy transfer from a synthetic chromophore located 14 residues from the BChl-coordinating His site are as follows: OGR (0.30) < RR (0.60) < BC2 (0.90). Oligomeric assemblies of the subunit complexes [31mer(−14Cys)X/BChl]n are accompanied by a bathochromic shift of the Qy absorption of the BChl-a oligomer as far as the 850-nm position found in cyclic native photosynthetic LH2 complexes. Room-temperature stabilized oligomeric biohybrids have energy-transfer quantum yields comparable to those of the dimeric subunit complexes as follows: OGR (0.20) < RR (0.80) < BC1 (0.90). Thus, the new biohybrid antennas retain the energy-transfer and self-assembly characteristics of the native antenna complexes, offer enhanced coverage of the solar spectrum, and illustrate a versatile paradigm for the construction of artificial LH systems.