Jijun Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jijun Tang has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
Guicheng Gao
School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang, China
4 shared publicationsQiuyang Dai
School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang, 212003, China, Zhenjiang, 212013, CHINA
4 shared publicationsWeiqi Luo
School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang, China
4 shared publications- Jiaoxia Zhang
School of Materials and Chemical Engineering Ningbo University of Technology Ningbo China
3 shared publications Yuchen Wang
School of Materials and Chemical Engineering, Ningbo University of Technology, Ningbo, China
3 shared publicationsHala A. Elzilal
Department of Science and Technology, University College-Ranyah, Taif University, Taif, Saudi Arabia
2 shared publications
Latest Publications
- 30 December 2025
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (1) , 015707
Synergistic adsorption–photocatalysis of In₂S₃/Bi₂₄Fe₂O₃₉ based on oxygen vacancy for efficient tetracycline removal
Environmental issues have emerged as a pivotal challenge in the realm of industrial development, rendering the prioritization of renewable energy and sustainable development imperative. Photocatalytic materials should align with these goals by being recyclable and reusable. In this work, spherical nano-Bi₂₄Fe₂O₃₉ was synthesized via a sol–gel method combined with calcination and loaded onto In₂S₃ to construct an S-scheme In₂S₃/Bi₂₄Fe₂O₃₉ heterojunction with superior photocatalytic degradation performance. The composite exhibited an extended light absorption range from 585 nm to 650 nm (IB-30), a narrowed apparent bandgap compared to pure In₂S₃, and significantly improved carrier separation and transfer efficiency. Under the optimal conditions of pH = 7, catalyst dosage = 10 mg, and tetracycline (TC) concentration = 10 mg l −1 , the IB-30 material achieved a removal rate of 85.8% for tetracycline, which is 1.7 times and 2.46 times higher than that of pure In₂S₃ and pure Bi₂₄Fe₂O₃₉, respectively. Driven by the built-in electric field, photogenerated electrons follow an S-scheme pathway for transfer, while・O₂ − (superoxide anion radicals) and h + (holes) serve as the primary active species, effectively facilitating the photocatalytic degradation reaction. This study provides new insights into developing efficient and stable visible-light-driven photocatalysts.
- 30 December 2025
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (1) , 015707
Synergistic adsorption–photocatalysis of In₂S₃/Bi₂₄Fe₂O₃₉ based on oxygen vacancy for efficient tetracycline removal
Environmental issues have emerged as a pivotal challenge in the realm of industrial development, rendering the prioritization of renewable energy and sustainable development imperative. Photocatalytic materials should align with these goals by being recyclable and reusable. In this work, spherical nano-Bi₂₄Fe₂O₃₉ was synthesized via a sol–gel method combined with calcination and loaded onto In₂S₃ to construct an S-scheme In₂S₃/Bi₂₄Fe₂O₃₉ heterojunction with superior photocatalytic degradation performance. The composite exhibited an extended light absorption range from 585 nm to 650 nm (IB-30), a narrowed apparent bandgap compared to pure In₂S₃, and significantly improved carrier separation and transfer efficiency. Under the optimal conditions of pH = 7, catalyst dosage = 10 mg, and tetracycline (TC) concentration = 10 mg l −1 , the IB-30 material achieved a removal rate of 85.8% for tetracycline, which is 1.7 times and 2.46 times higher than that of pure In₂S₃ and pure Bi₂₄Fe₂O₃₉, respectively. Driven by the built-in electric field, photogenerated electrons follow an S-scheme pathway for transfer, while・O₂ − (superoxide anion radicals) and h + (holes) serve as the primary active species, effectively facilitating the photocatalytic degradation reaction. This study provides new insights into developing efficient and stable visible-light-driven photocatalysts.
- 24 February 2025
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 8 (2) , 1-14
Excellent electrochemical performance based on covalently crosslinked chitosan hydrogel electrolytes induced structural stability against alkali
- 24 February 2025
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 8 (2) , 1-14
Excellent electrochemical performance based on covalently crosslinked chitosan hydrogel electrolytes induced structural stability against alkali
- 17 December 2024
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 8 (1) , 1-14
A highly efficient adsorption-photocatalytic synergistic degradation of tetracycline by in-situ constructed Bi5O7I/ZIF-8 heterojunction
- 17 December 2024
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 8 (1) , 1-14
A highly efficient adsorption-photocatalytic synergistic degradation of tetracycline by in-situ constructed Bi5O7I/ZIF-8 heterojunction
- 18 October 2023
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 6 (6) , 1-15
Z-scheme metal organic framework@graphene oxide composite photocatalysts with enhanced photocatalytic degradation of tetracycline
- 18 October 2023
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 6 (6) , 1-15
Z-scheme metal organic framework@graphene oxide composite photocatalysts with enhanced photocatalytic degradation of tetracycline
- Open Access
- 21 September 2023
- Published by Springer Nature in Research Square
Z-scheme MIL-125 (Ti)@Graphene Oxide composite photocatalysts with enhanced photocatalytic activity and stability for Tetracycline degradation
Domestic wastewater contains trace amounts of organic pollutants that are difficult to remove, such as antibiotics and dyes, so effective degradation technologies need to be found. Therefore, we report the fabrication of a novel Z-scheme MIL-125(Ti)/GO photocatalyst by an in-situ growing method. The photodegradation experiment showed that MIL-125(Ti)/GO degraded TC by 81.1% at 5% GO addition, which is 1.7 and 3.8 times higher than MIL-125(Ti) and GO, respectively. The degradation rate reached 0.0201 min-1, 3.3 times and 8.1 times higher than MIL-125(Ti) and GO, respectively. The study shows that GO and MIL-125(Ti), as electron donor and electron acceptor, respectively, form a Z-scheme heterojunction structure, which effectively improves the photocatalytic performance of MIL-125(Ti). MIL-125(Ti)/GO has excellent structural stability and reusable availability, and the main reactive radical are ·O-2 and h+. This study provides new insights into the design and fabrication of MIL-125(Ti) derivatives as photodegrading organic pollutants.
- 21 September 2023
- Published by Springer Nature in Research Square
Open AccessZ-scheme MIL-125 (Ti)@Graphene Oxide composite photocatalysts with enhanced photocatalytic activity and stability for Tetracycline degradation
Domestic wastewater contains trace amounts of organic pollutants that are difficult to remove, such as antibiotics and dyes, so effective degradation technologies need to be found. Therefore, we report the fabrication of a novel Z-scheme MIL-125(Ti)/GO photocatalyst by an in-situ growing method. The photodegradation experiment showed that MIL-125(Ti)/GO degraded TC by 81.1% at 5% GO addition, which is 1.7 and 3.8 times higher than MIL-125(Ti) and GO, respectively. The degradation rate reached 0.0201 min-1, 3.3 times and 8.1 times higher than MIL-125(Ti) and GO, respectively. The study shows that GO and MIL-125(Ti), as electron donor and electron acceptor, respectively, form a Z-scheme heterojunction structure, which effectively improves the photocatalytic performance of MIL-125(Ti). MIL-125(Ti)/GO has excellent structural stability and reusable availability, and the main reactive radical are ·O-2 and h+. This study provides new insights into the design and fabrication of MIL-125(Ti) derivatives as photodegrading organic pollutants.
- 21 February 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (20) , 205601
MOF composites derived BiFeO 3 @Bi 5 O 7 I n–n heterojunction for enhanced photocatalytic performance
BiFeO 3 is a photocatalyst with excellent performance. However, its applications are limited due to its wide bandgap. In this paper, MIL-101(Fe)@BiOI composite material is synthesized by hydrothermal method and then calcined at high temperature to obtain BiFeO 3 @Bi 5 O 7 I composite material with high degradation capacity. Among them, an n–n heterojunction is formed, which improves the efficiency of charge transfer, and the recombination of light-generated electrons and holes promotes improved photocatalytic efficiency and stability. The result of photocatalytic degradation of tetracycline under visible light irradiation showed, BiFeO 3 @Bi 5 O 7 I (1:2) has the best photodegradation effect, with a degradation rate of 86.4%, which proves its potential as a photocatalyst.
- 21 February 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (20) , 205601
MOF composites derived BiFeO 3 @Bi 5 O 7 I n–n heterojunction for enhanced photocatalytic performance
BiFeO 3 is a photocatalyst with excellent performance. However, its applications are limited due to its wide bandgap. In this paper, MIL-101(Fe)@BiOI composite material is synthesized by hydrothermal method and then calcined at high temperature to obtain BiFeO 3 @Bi 5 O 7 I composite material with high degradation capacity. Among them, an n–n heterojunction is formed, which improves the efficiency of charge transfer, and the recombination of light-generated electrons and holes promotes improved photocatalytic efficiency and stability. The result of photocatalytic degradation of tetracycline under visible light irradiation showed, BiFeO 3 @Bi 5 O 7 I (1:2) has the best photodegradation effect, with a degradation rate of 86.4%, which proves its potential as a photocatalyst.
- Open Access
ZnO@Bi5O7I Heterojunction Derived from ZIF-8@BiOI for Enhanced Photocatalytic Activity under Visible Light
In the study, ZIF-8@BIOI composites were synthesized by the hydrothermal method and then calcined to acquire the ZnO@Bi5O7I composite as a novel composite for the photocatalytic deterioration of the antibiotic tetracycline (TC). The prepared ZnO@Bi5O7I composites were physically and chemically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer–Emmet–Teller (BET) surface area, UV–Vis diffuse reflectance spectroscopy (DRS), emission fluorescence spectra, transient photocurrent response, electrochemical impedance spectra and Mott–Schottky. Among the composites formed an n–n heterojunction, which increased the separation efficiency of electrons and holes and the efficiency of charge transfer. After the photocatalytic degradation test of TC, it showed that ZnO@Bi5O7I (2:1) had the best photodegradation effect with an 86.2% removal rate, which provides a new approach to the treatment of antibiotics such as TC in wastewater.
Open AccessZnO@Bi5O7I Heterojunction Derived from ZIF-8@BiOI for Enhanced Photocatalytic Activity under Visible Light
In the study, ZIF-8@BIOI composites were synthesized by the hydrothermal method and then calcined to acquire the ZnO@Bi5O7I composite as a novel composite for the photocatalytic deterioration of the antibiotic tetracycline (TC). The prepared ZnO@Bi5O7I composites were physically and chemically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer–Emmet–Teller (BET) surface area, UV–Vis diffuse reflectance spectroscopy (DRS), emission fluorescence spectra, transient photocurrent response, electrochemical impedance spectra and Mott–Schottky. Among the composites formed an n–n heterojunction, which increased the separation efficiency of electrons and holes and the efficiency of charge transfer. After the photocatalytic degradation test of TC, it showed that ZnO@Bi5O7I (2:1) had the best photodegradation effect with an 86.2% removal rate, which provides a new approach to the treatment of antibiotics such as TC in wastewater.
- Open Access
Seed-Assisted Synthesis of Graphene Films on Insulating Substrate
Synthesizing graphene at a large-scale and of high quality on insulating substrate is a prerequisite for graphene applications in electronic devices. Typically, graphene is synthesized and then transferred to the proper substrate for subsequent device preparation. However, the complicated and skilled transfer process involves some issues such as wrinkles, residual contamination and breakage of graphene films, which will greatly degrade its performance. Direct synthesis of graphene on insulating substrates without a transfer process is highly desirable for device preparation. Here, we report a simple, transfer-free method to synthesize graphene directly on insulating substrates (SiO2/Si, quartz) by using a Cu layer, graphene oxide and Poly (vinyl alcohol) as the catalyst, seeds and carbon sources, respectively. Atomic force microscope (AFM), scanning electronic microscope (SEM) and Raman spectroscopy are used to characterize the interface of insulating substrate and graphene. The graphene films directly grown on quartz glass can attain a high transmittance of 92.8% and a low sheet resistance of 620 Ω/square. The growth mechanism is also revealed. This approach provides a highly efficient method for the direct production of graphene on insulating substrates.
Open AccessSeed-Assisted Synthesis of Graphene Films on Insulating Substrate
Synthesizing graphene at a large-scale and of high quality on insulating substrate is a prerequisite for graphene applications in electronic devices. Typically, graphene is synthesized and then transferred to the proper substrate for subsequent device preparation. However, the complicated and skilled transfer process involves some issues such as wrinkles, residual contamination and breakage of graphene films, which will greatly degrade its performance. Direct synthesis of graphene on insulating substrates without a transfer process is highly desirable for device preparation. Here, we report a simple, transfer-free method to synthesize graphene directly on insulating substrates (SiO2/Si, quartz) by using a Cu layer, graphene oxide and Poly (vinyl alcohol) as the catalyst, seeds and carbon sources, respectively. Atomic force microscope (AFM), scanning electronic microscope (SEM) and Raman spectroscopy are used to characterize the interface of insulating substrate and graphene. The graphene films directly grown on quartz glass can attain a high transmittance of 92.8% and a low sheet resistance of 620 Ω/square. The growth mechanism is also revealed. This approach provides a highly efficient method for the direct production of graphene on insulating substrates.